Develop Reference

Error when creating JWT Token

As I am on my way to switch from using the legacy header authentication method to the JWT Token method, I have used the following example found here.
However, I get the following error :
Error calling Login: {
"errorCode": "PARTNER_AUTHENTICATION_FAILED",
"message": "The specified Integrator Key was not found or is disabled. An Integrator key was not specified."
}
Below is my C# code.
string oauthBasePath = "account-d.docusign.com";
string privateKeyFilename = "./private.pem";
int expiresInHours = 1;
ApiClient apiClient = new ApiClient(docuSignUrl);
apiClient.ConfigureJwtAuthorizationFlow(
"IntegratorKey",
"USER ID GUID",
oauthBasePath,
privateKeyFilename,
expiresInHours);
AuthenticationApi authApi = new AuthenticationApi(apiClient.Configuration);
return authApi.Login();
I have found this thread that shows the similar error but it doesn't seem resolved
Update 05/07/2018: I have validated the domain used in my account but I still get the same error message
Update 05/11/2018: When I use my code but that I replace the IntegratorKey, UserID and private key used in the DocuSign Unit Tests here, my code now works !? Hence, I can only conclude that the issue doesn't come from my code but maybe a configuration issue on the DocuSign side ? do I need to configure my Integrator Key a specific way ?

After more investigation, the reason with such an error is that I was not generating the Authorization Code Grant prior to executing my code.
Based on the information found here, I had to perform the following HTTPRequest example :
GET /oauth/auth?
response_type=token
&scope=signature
&client_id=YOUR_INTERGRATOR_KEY
&state=a39fh23hnf23
&redirect_uri=http://www.example.com/callback
Once it is approved, then I can run my code successfully.
In the end, the initial error message is really misleading (I might argue it could be considered a bug ?).

Retrieve the Original (Client) Url Without the Default Document [duplicate]

I would like to get the exact url that user typed into the browser. Of course I could always use something like Request.Url.ToString() but this does not give me what i want in the following situation:
http://www.mysite.com/rss
With the url above what Request.Url.ToString() would give me is:
http://www.mysite.com/rss/Default.aspx
Does anyone know how to accomplish this?
I have already tried:
Request.Url
Request.RawUrl
this.Request.ServerVariables["CACHE_URL"]
this.Request.ServerVariables["HTTP_URL"]
((HttpWorkerRequest)((IServiceProvider)HttpContext.Current).GetService(typeof(HttpWorkerRequest))).GetServerVariable( "CACHE_URL")
((HttpWorkerRequest)((IServiceProvider)HttpContext.Current).GetService(typeof(HttpWorkerRequest))).GetServerVariable( "HTTP_URL")

Edit: You want the HttpWorkerRequest.GetServerVariable() with the key HTTP_URL or CACHE_URL. Note that the behavior differs between IIS 5 and IIS 6 (see documentation of the keys).
In order to be able to access all server variables (in case you get null), directly access the HttpWorkerRequest:
HttpWorkerRequest workerRequest =
(HttpWorkerRequest)((IServiceProvider)HttpContext.Current)
.GetService(typeof(HttpWorkerRequest));

Remember too that the "exact URL that the user entered" may never be available at the server. Each link in the chain from fingers to server can slightly modify the request.
For example if I type xheo.com into my browser window, IE will be convert to http://www.xheo.com automatically. Then when the request gets to IIS it says to the browser - you really want the default page at http://www.xheo.com/Default.aspx. So the browser responds by asking for the default page.
Same thing happens with HTTP 30x redirect requests. The server will likely only ever see the final request made by the browser.

Try using Request.Url.OriginalString
Might give you the thing you are looking for.

It is possible, you just need to combining a few of the values from the request object to rebuild the exact url entered:
Dim pageUrl As String = String.Format("{0}://{1}{2}",
Request.Url.Scheme,
Request.Url.Host,
Request.RawUrl)
Response.Write(pageUrl)
Entering the address http://yousite.com/?hello returns exactly:
http://yousite.com/?hello

Request.RawUrl
I think is the monkey you are after...

Easiest way to do this is used client-side programming to extract the exact url:
<script language="javascript" type="text/javascript">
document.write (document.location.href);
</script>

Connecting via CMIS (dotCMIS) to SP2010: exception unauthorised

Im using dotCMIS and would like to do a simple connect to my SP2010 server. Im trying to do this with C# like here http://chemistry.apache.org/dotnet/getting-started-with-dotcmis.html in the first part
So I have something like this:
Dictionary<string, string> parameters = new Dictionary<string, string>();
parameters[SessionParameter.BindingType] = BindingType.AtomPub;
parameters[SessionParameter.AtomPubUrl] = "http://mysharepoint";
parameters[SessionParameter.User] = "SPAdmin";
parameters[SessionParameter.Password] = "1234sharepoint";
SessionFactory factory = SessionFactory.NewInstance();
ISession session = factory.GetRepositories(parameters)[0].CreateSession(); //exception unathorized
But I get always the exception: DotCMIS.Expcetions.CmisRunterimException: Unathorised
Any ideas? Via browser I can login to the site with the same user/pass, so thats might be not the problem. At first I tought its because of the NTLM problem (https://issues.apache.org/jira/browse/CMIS-531) but even if Im using parameters[SessionParameter.AuthenticationProviderClass] = "DotCMIS.Binding.NtlmAuthenticationProvider"; its the same exception. And well... this exception is not really helping me. I wish I could get more information - maybe there is a better way? What else could I try? Thank you!
PS: And yes, before I started with dotCMIS I did install and configure the MS CMIS connector: http://technet.microsoft.com/en-us/library/ff934619.aspx

Your AtomPubUrl looks suspicious. I can't tell if that's a placeholder you've added to mask the real URL or if that's the actual URL you are using. If it is the actual URL it looks like it is missing the path to the AtomPub service document. To tell if that's the case, you should be able to invoke the URL, log in, and get a bunch of XML back, which is the CMIS service descriptor. If instead you are getting a user-facing page full of HTML, you are using the wrong URL.
For example, in Alfresco, users log in to /share, but the AtomPub binding is at /alfresco/cmisatom.

Yes the AtomPubUrl was wrong.
For sharepoint its not enough to post the default sp url (http://mysharepoint) or the url to the cmis lib (http://mysharepoint/cmis)
I need to point to the repository id, somehow the sp endpoint for CMIS is:
http://mysharepoint/_vti_bin/<myLib4CMIS>/<repID>?getRepositoryInfo
http://technet.microsoft.com/en-us/library/ff934619.aspx
Somehow it was confusing, but its working :) dotCMIS is really nice.

Adobe AIR & Web Service Call. Errors with Error #1085: The element type "br" must be terminated by the matching end-tag "</br>"

Here is my simple code, which works fine if called from php or any other client then adobe air. Same code also works from calling from SWF, there is fluorineFX code for other part of project as well, but then it doesn't do anything to break this.
I do find one thing that all POST calls were somehow changing to GET, which really amazes me. I would be so glad to get the answer for this. Thanks in Advance everyone. Below is the almost same code from my web service. with AIR code just under it.
[WebMethod(EnableSession = true)]
public bool Authenticate(string UserName,string Password)
{
try
{
if (Membership.ValidateUser(UserName, Password)){
FormsAuthentication.SetAuthCookie(UserName, true);
return true;
}
return false;
}
catch (Exception ex)
{
return false;
}
}
and my call from adobe AIR code as below
var ws:WebService = new WebService();
ws.wsdl="http://mysite.com/myservice.asmx?WSDL";
ws.useProxy=false;
ws.addEventListener(LoadEvent.LOAD,onWSDLLoad);
ws.loadWSDL();
ws.Authenticate.addEventListener(ResultEvent.RESULT,resultHandler);
ws.Authenticate.addEventListener(FaultEvent.FAULT,onLoginFaultHandler);
ws.Authenticate("usrname","password");
protected function onLoginFaultHandler(event:FaultEvent):void
{
Alert.show('Login Failed with messsage\r\n[ '+event.fault.faultString+' ]');
/* Error #1085: The element type "br" must be terminated
by the matching end-tag "</br>". */
/* checking the content value of fault event shows
same out put as http://mysite.com/myservice.asmx */
}
protected function onLoginResultHandler(event:ResultEvent):void
{
/* on success code */
}
This guy tells us following in page http://verveguy.blogspot.com/2008/07/truth-about-flex-httpservice.html
All HTTP GET requests are stripped of headers. It's not in the Flex stack so it's probably the underlying Flash player runtime.
All HTTP GET requests that have content type other than "application/x-www-form-url-encoded" are turned into POST requests
All HTTP POST requests that have no actual posted data are turned into GET requests. See 1/ and 2/
All HTTP PUT and HTTP DELETE requests are turned into POST requests. This appears to be a browser limitation that the Flash player is stuck with.
I do see my request above turns into GET, but then I DO have post values in it. OR if those are somehow are not sent or recorded by Web Service Object ?

This is pretty simple... The Flex XML parser uses strict xml checking, so all tags must be closed. If you can change the web service, then change all <br> tags to <br />.

I finally found the answer myself. turns out I was having cookies set to AutoDetect. Which meant that the AIR would call a URL and it would need to redirect to keep the cookie/session value in side the URI itself.
Now I switched that to UseCookies and Everything is back to normal. I could test this from a sample web services and realized it was the server-side that was doing something wrong. And from AIR to Browser that's the only difference of cookies.
Somehow nusoap for PHP is smart to know that there is AutoDetect or New URI of the Web Services available. But AIR couldn't locate that. Anyways Thanks everyone for helping me solve this.

Get the exact url the user typed into the browser

I would like to get the exact url that user typed into the browser. Of course I could always use something like Request.Url.ToString() but this does not give me what i want in the following situation:
http://www.mysite.com/rss
With the url above what Request.Url.ToString() would give me is:
http://www.mysite.com/rss/Default.aspx
Does anyone know how to accomplish this?
I have already tried:
Request.Url
Request.RawUrl
this.Request.ServerVariables["CACHE_URL"]
this.Request.ServerVariables["HTTP_URL"]
((HttpWorkerRequest)((IServiceProvider)HttpContext.Current).GetService(typeof(HttpWorkerRequest))).GetServerVariable( "CACHE_URL")
((HttpWorkerRequest)((IServiceProvider)HttpContext.Current).GetService(typeof(HttpWorkerRequest))).GetServerVariable( "HTTP_URL")

Edit: You want the HttpWorkerRequest.GetServerVariable() with the key HTTP_URL or CACHE_URL. Note that the behavior differs between IIS 5 and IIS 6 (see documentation of the keys).
In order to be able to access all server variables (in case you get null), directly access the HttpWorkerRequest:
HttpWorkerRequest workerRequest =
(HttpWorkerRequest)((IServiceProvider)HttpContext.Current)
.GetService(typeof(HttpWorkerRequest));

Remember too that the "exact URL that the user entered" may never be available at the server. Each link in the chain from fingers to server can slightly modify the request.
For example if I type xheo.com into my browser window, IE will be convert to http://www.xheo.com automatically. Then when the request gets to IIS it says to the browser - you really want the default page at http://www.xheo.com/Default.aspx. So the browser responds by asking for the default page.
Same thing happens with HTTP 30x redirect requests. The server will likely only ever see the final request made by the browser.

Try using Request.Url.OriginalString
Might give you the thing you are looking for.

It is possible, you just need to combining a few of the values from the request object to rebuild the exact url entered:
Dim pageUrl As String = String.Format("{0}://{1}{2}",
Request.Url.Scheme,
Request.Url.Host,
Request.RawUrl)
Response.Write(pageUrl)
Entering the address http://yousite.com/?hello returns exactly:
http://yousite.com/?hello

Request.RawUrl
I think is the monkey you are after...

Easiest way to do this is used client-side programming to extract the exact url:
<script language="javascript" type="text/javascript">
document.write (document.location.href);
</script>