The reason for interfaces truly eludes me. From what I understand, it is kind of a work around for the non-existent multi-inheritance which doesn't exist in C# (or so I was told).
All I see is, you predefine some members and functions, which then have to be re-defined in the class again. Thus making the interface redundant. It just feels like syntactic… well, junk to me (Please no offense meant. Junk as in useless stuff).
In the example given below taken from a different C# interfaces thread on stack overflow, I would just create a base class called Pizza instead of an interface.
easy example (taken from a different stack overflow contribution)
public interface IPizza
{
public void Order();
}
public class PepperoniPizza : IPizza
{
public void Order()
{
//Order Pepperoni pizza
}
}
public class HawaiiPizza : IPizza
{
public void Order()
{
//Order HawaiiPizza
}
}
No one has really explained in plain terms how interfaces are useful, so I'm going to give it a shot (and steal an idea from Shamim's answer a bit).
Lets take the idea of a pizza ordering service. You can have multiple types of pizzas and a common action for each pizza is preparing the order in the system. Each pizza has to be prepared but each pizza is prepared differently. For example, when a stuffed crust pizza is ordered the system probably has to verify certain ingredients are available at the restaurant and set those aside that aren't needed for deep dish pizzas.
When writing this in code, technically you could just do
public class Pizza
{
public void Prepare(PizzaType tp)
{
switch (tp)
{
case PizzaType.StuffedCrust:
// prepare stuffed crust ingredients in system
break;
case PizzaType.DeepDish:
// prepare deep dish ingredients in system
break;
//.... etc.
}
}
}
However, deep dish pizzas (in C# terms) may require different properties to be set in the Prepare() method than stuffed crust, and thus you end up with a lot of optional properties, and the class doesn't scale well (what if you add new pizza types).
The proper way to solve this is to use interface. The interface declares that all Pizzas can be prepared, but each pizza can be prepared differently. So if you have the following interfaces:
public interface IPizza
{
void Prepare();
}
public class StuffedCrustPizza : IPizza
{
public void Prepare()
{
// Set settings in system for stuffed crust preparations
}
}
public class DeepDishPizza : IPizza
{
public void Prepare()
{
// Set settings in system for deep dish preparations
}
}
Now your order handling code does not need to know exactly what types of pizzas were ordered in order to handle the ingredients. It just has:
public PreparePizzas(IList<IPizza> pizzas)
{
foreach (IPizza pizza in pizzas)
pizza.Prepare();
}
Even though each type of pizza is prepared differently, this part of the code doesn't have to care what type of pizza we are dealing with, it just knows that it's being called for pizzas and therefore each call to Prepare will automatically prepare each pizza correctly based on its type, even if the collection has multiple types of pizzas.
The point is that the interface represents a contract. A set of public methods any implementing class has to have. Technically, the interface only governs syntax, i.e. what methods are there, what arguments they get and what they return. Usually they encapsulate semantics as well, although that only by documentation.
You can then have different implementations of an interface and swap them out at will. In your example, since every pizza instance is an IPizza you can use IPizza wherever you handle an instance of an unknown pizza type. Any instance whose type inherits from IPizza is guaranteed to be orderable, as it has an Order() method.
Python is not statically-typed, therefore types are kept and looked up at runtime. So you can try calling an Order() method on any object. The runtime is happy as long as the object has such a method and probably just shrugs and says »Meh.« if it doesn't. Not so in C#. The compiler is responsible for making the correct calls and if it just has some random object the compiler doesn't know yet whether the instance during runtime will have that method. From the compiler's point of view it's invalid since it cannot verify it. (You can do such things with reflection or the dynamic keyword, but that's going a bit far right now, I guess.)
Also note that an interface in the usual sense does not necessarily have to be a C# interface, it could be an abstract class as well or even a normal class (which can come in handy if all subclasses need to share some common code – in most cases, however, interface suffices).
For me, when starting out, the point to these only became clear when you stop looking at them as things to make your code easier/faster to write - this is not their purpose. They have a number of uses:
(This is going to lose the pizza analogy, as it's not very easy to visualise a use of this)
Say you are making a simple game on screen and It will have creatures with which you interact.
A: They can make your code easier to maintain in the future by introducing a loose coupling between your front end and your back end implementation.
You could write this to start with, as there are only going to be trolls:
// This is our back-end implementation of a troll
class Troll
{
void Walk(int distance)
{
//Implementation here
}
}
Front end:
function SpawnCreature()
{
Troll aTroll = new Troll();
aTroll.Walk(1);
}
Two weeks down the line, marketing decide you also need Orcs, as they read about them on twitter, so you would have to do something like:
class Orc
{
void Walk(int distance)
{
//Implementation (orcs are faster than trolls)
}
}
Front end:
void SpawnCreature(creatureType)
{
switch(creatureType)
{
case Orc:
Orc anOrc = new Orc();
anORc.Walk();
case Troll:
Troll aTroll = new Troll();
aTroll.Walk();
}
}
And you can see how this starts to get messy. You could use an interface here so that your front end would be written once and (here's the important bit) tested, and you can then plug in further back end items as required:
interface ICreature
{
void Walk(int distance)
}
public class Troll : ICreature
public class Orc : ICreature
//etc
Front end is then:
void SpawnCreature(creatureType)
{
ICreature creature;
switch(creatureType)
{
case Orc:
creature = new Orc();
case Troll:
creature = new Troll();
}
creature.Walk();
}
The front end now only cares about the interface ICreature - it's not bothered about the internal implementation of a troll or an orc, but only on the fact that they implement ICreature.
An important point to note when looking at this from this point of view is that you could also easily have used an abstract creature class, and from this perspective, this has the same effect.
And you could extract the creation out to a factory:
public class CreatureFactory {
public ICreature GetCreature(creatureType)
{
ICreature creature;
switch(creatureType)
{
case Orc:
creature = new Orc();
case Troll:
creature = new Troll();
}
return creature;
}
}
And our front end would then become:
CreatureFactory _factory;
void SpawnCreature(creatureType)
{
ICreature creature = _factory.GetCreature(creatureType);
creature.Walk();
}
The front end now does not even have to have a reference to the library where Troll and Orc are implemented (providing the factory is in a separate library) - it need know nothing about them whatsoever.
B: Say you have functionality that only some creatures will have in your otherwise homogenous data structure, e.g.
interface ICanTurnToStone
{
void TurnToStone();
}
public class Troll: ICreature, ICanTurnToStone
Front end could then be:
void SpawnCreatureInSunlight(creatureType)
{
ICreature creature = _factory.GetCreature(creatureType);
creature.Walk();
if (creature is ICanTurnToStone)
{
(ICanTurnToStone)creature.TurnToStone();
}
}
C: Usage for dependency injection
Most dependency injection frameworks work when there is a very loose coupling between the front end code and the back end implementation. If we take our factory example above and have our factory implement an interface:
public interface ICreatureFactory {
ICreature GetCreature(string creatureType);
}
Our front end could then have this injected (e.g an MVC API controller) through the constructor (typically):
public class CreatureController : Controller {
private readonly ICreatureFactory _factory;
public CreatureController(ICreatureFactory factory) {
_factory = factory;
}
public HttpResponseMessage TurnToStone(string creatureType) {
ICreature creature = _factory.GetCreature(creatureType);
creature.TurnToStone();
return Request.CreateResponse(HttpStatusCode.OK);
}
}
With our DI framework (e.g. Ninject or Autofac), we can set them up so that at runtime a instance of CreatureFactory will be created whenever an ICreatureFactory is needed in an constructor - this makes our code nice and simple.
It also means that when we write a unit test for our controller, we can provide a mocked ICreatureFactory (e.g. if the concrete implementation required DB access, we don't want our unit tests dependent on that) and easily test the code in our controller.
D: There are other uses e.g. you have two projects A and B that for 'legacy' reasons are not well structured, and A has a reference to B.
You then find functionality in B that needs to call a method already in A. You can't do it using concrete implementations as you get a circular reference.
You can have an interface declared in B that the class in A then implements. Your method in B can be passed an instance of a class that implements the interface with no problem, even though the concrete object is of a type in A.
Examples above don't make much sense. You could accomplish all above examples using classes (abstract class if you want it to behave only as a contract):
public abstract class Food {
public abstract void Prepare();
}
public class Pizza : Food {
public override void Prepare() { /* Prepare pizza */ }
}
public class Burger : Food {
public override void Prepare() { /* Prepare Burger */ }
}
You get the same behavior as with interface. You can create a List<Food> and iterate that w/o knowing what class sits on top.
More adequate example would be multiple inheritance:
public abstract class MenuItem {
public string Name { get; set; }
public abstract void BringToTable();
}
// Notice Soda only inherits from MenuItem
public class Soda : MenuItem {
public override void BringToTable() { /* Bring soda to table */ }
}
// All food needs to be cooked (real food) so we add this
// feature to all food menu items
public interface IFood {
void Cook();
}
public class Pizza : MenuItem, IFood {
public override void BringToTable() { /* Bring pizza to table */ }
public void Cook() { /* Cook Pizza */ }
}
public class Burger : MenuItem, IFood {
public override void BringToTable() { /* Bring burger to table */ }
public void Cook() { /* Cook Burger */ }
}
Then you can use all of them as MenuItem and don't care about how they handle each method call.
public class Waiter {
public void TakeOrder(IEnumerable<MenuItem> order)
{
// Cook first
// (all except soda because soda is not IFood)
foreach (var food in order.OfType<IFood>())
food.Cook();
// Bring them all to the table
// (everything, including soda, pizza and burger because they're all menu items)
foreach (var menuItem in order)
menuItem.BringToTable();
}
}
Simple Explanation with analogy
No interface (Example 1):
No interface (Example 2):
With an interface:
The Problem to Solve: What is the purpose of polymorphism?
Analogy: So I'm a foreperson on a construction site. I don't know which tradesperson is going to walk in. But I tell them what to do.
If it's a carpenter I say: build wooden scaffolding.
If it's a plumber, I say: Set up the pipes
If it's a BJP government bureaucrat, I say, three bags full of cash, sir.
The problem with the above approach is that I have to: (i) know who's walking in that door, and depending on who it is, I have to tell them what to do. This typically makes code harder to maintain or more error prone.
The implications of knowing what to do:
This means if the carpenter's code changes from: BuildScaffolding() to BuildScaffold() (i.e. a slight name change) then I will have to also change the calling class (i.e. the Foreperson class) as well - you'll have to make two changes to the code instead of (basically) just one. With polymorphism you (basically) only need to make one change to achieve the same result.
Secondly you won't have to constantly ask: who are you? ok do this...who are you? ok do that.....polymorphism - it DRYs that code, and is very effective in certain situations:
with polymorphism you can easily add additional classes of tradespeople without changing any existing code. (i.e. the second of the SOLID design principles: Open-close principle).
The solution
Imagine a scenario where, no matter who walks in the door, I can say: "Work()" and they do their respect jobs that they specialise in: the plumber would deal with pipes, and the electrician would deal with wires, and a bureaucrat could specialise in extracting bribes and making double work for everyone else.
The benefit of this approach is that: (i) I don't need to know exactly who is walking in through that door - all i need to know is that they will be a type of tradie and that they can do work, and secondly, (ii) i don't need to know anything about that particular trade. The tradie will take care of that.
So instead of this:
if(electrician) then electrician.FixCablesAndElectricity()
if(plumber) then plumber.IncreaseWaterPressureAndFixLeaks()
if(keralaCustoms) then keralaCustoms.askForBribes()
I can do something like this:
ITradesman tradie = Tradesman.Factory(); // in reality i know it's a plumber, but in the real world you won't know who's on the other side of the tradie assignment.
tradie.Work(); // and then tradie will do the work of a plumber, or electrician etc. depending on what type of tradesman he is. The foreman doesn't need to know anything, apart from telling the anonymous tradie to get to Work()!!
What's the benefit?
The benefit is that if the specific job requirements of the carpenter etc change, then the foreperson won't need to change his code - he doesn't need to know or care. All that matters is that the carpenter knows what is meant by Work(). Secondly, if a new type of construction worker comes onto the job site, then the foreman doesn't need to know anything about the trade - all the foreman cares is if the construction worker (.e.g Welder, Glazier, Tiler etc.) can get some Work() done.
Summary
An interface allows you to get the person to do the work they are assigned to, without you having the knowledge of exactly who they are or the specifics of what they can do. This allows you to easily add new types (of trade) without changing your existing code (well technically you do change it a tiny tiny bit), and that's the real benefit of an OOP approach vs. a more functional programming methodology.
If you don't understand any of the above or if it isn't clear ask in a comment and i'll try to make the answer better.
Here are your examples reexplained:
public interface IFood // not Pizza
{
public void Prepare();
}
public class Pizza : IFood
{
public void Prepare() // Not order for explanations sake
{
//Prepare Pizza
}
}
public class Burger : IFood
{
public void Prepare()
{
//Prepare Burger
}
}
In the absence of duck typing as you can use it in Python, C# relies on interfaces to provide abstractions. If the dependencies of a class were all concrete types, you could not pass in any other type - using interfaces you can pass in any type that implements the interface.
The Pizza example is bad because you should be using an abstract class that handles the ordering, and the pizzas should just override the pizza type, for example.
You use interfaces when you have a shared property, but your classes inherit from different places, or when you don't have any common code you could use. For instance, this is used things that can be disposed IDisposable, you know it will be disposed, you just don't know what will happen when it's disposed.
An interface is just a contract that tells you some things an object can do, what parameters and what return types to expect.
Consider the case where you don't control or own the base classes.
Take visual controls for instance, in .NET for Winforms they all inherit from the base class Control, that is completely defined in the .NET framework.
Let's assume you're in the business of creating custom controls. You want to build new buttons, textboxes, listviews, grids, whatnot and you'd like them all to have certain features unique to your set of controls.
For instance you might want a common way to handle theming, or a common way to handle localization.
In this case you can't "just create a base class" because if you do that, you have to reimplement everything that relates to controls.
Instead you will descend from Button, TextBox, ListView, GridView, etc. and add your code.
But this poses a problem, how can you now identify which controls are "yours", how can you build some code that says "for all the controls on the form that are mine, set the theme to X".
Enter interfaces.
Interfaces are a way to look at an object, to determine that the object adheres to a certain contract.
You would create "YourButton", descend from Button, and add support for all the interfaces you need.
This would allow you to write code like the following:
foreach (Control ctrl in Controls)
{
if (ctrl is IMyThemableControl)
((IMyThemableControl)ctrl).SetTheme(newTheme);
}
This would not be possible without interfaces, instead you would have to write code like this:
foreach (Control ctrl in Controls)
{
if (ctrl is MyThemableButton)
((MyThemableButton)ctrl).SetTheme(newTheme);
else if (ctrl is MyThemableTextBox)
((MyThemableTextBox)ctrl).SetTheme(newTheme);
else if (ctrl is MyThemableGridView)
((MyThemableGridView)ctrl).SetTheme(newTheme);
else ....
}
In this case, you could ( and probably would ) just define a Pizza base class and inherit from them. However, there are two reasons where Interfaces allow you to do things that cannot be achieved in other ways:
A class can implement multiple interfaces. It just defines features that the class must have. Implementing a range of interfaces means that a class can fulfil multiple functions in different places.
An interface can be defined in a hogher scope than the class or the caller. This means that you can separate the functionality, separate the project dependency, and keep the functionality in one project or class, and the implementation of this elsewhere.
One implication of 2 is that you can change the class that is being used, just requiring that it implements the appropriate interface.
Consider you can't use multiple inheritance in C#, and then look at your question again.
I did a search for the word "composition" on this page and didn't see it once. This answer is very much in addition to the answers aforementioned.
One of the absolutely crucial reasons for using interfaces in an Object Oriented Project is that they allow you to favour composition over inheritance. By implementing interfaces you can decouple your implementations from the various algorithms you are applying to them.
This superb "Decorator Pattern" tutorial by Derek Banas (which - funnily enough - also uses pizza as an example) is a worthwhile illustration:
https://www.youtube.com/watch?v=j40kRwSm4VE
Interface = contract, used for loose coupling (see GRASP).
If I am working on an API to draw shapes, I may want to use DirectX or graphic calls, or OpenGL. So, I will create an interface, which will abstract my implementation from what you call.
So you call a factory method: MyInterface i = MyGraphics.getInstance(). Then, you have a contract, so you know what functions you can expect in MyInterface. So, you can call i.drawRectangle or i.drawCube and know that if you swap one library out for another, that the functions are supported.
This becomes more important if you are using Dependency Injection, as then you can, in an XML file, swap implementations out.
So, you may have one crypto library that can be exported that is for general use, and another that is for sale only to American companies, and the difference is in that you change a config file, and the rest of the program isn't changed.
This is used a great deal with collections in .NET, as you should just use, for example, List variables, and don't worry whether it was an ArrayList or LinkedList.
As long as you code to the interface then the developer can change the actual implementation and the rest of the program is left unchanged.
This is also useful when unit testing, as you can mock out entire interfaces, so, I don't have to go to a database, but to a mocked out implementation that just returns static data, so I can test my method without worrying if the database is down for maintenance or not.
Interfaces are for applying connection between different classes. for example, you have a class for car and a tree;
public class Car { ... }
public class Tree { ... }
you want to add a burnable functionality for both classes. But each class have their own ways to burn. so you simply make;
public class Car : IBurnable
{
public void Burn() { ... }
}
public class Tree : IBurnable
{
public void Burn() { ... }
}
You will get interfaces, when you will need them :) You can study examples, but you need the Aha! effect to really get them.
Now that you know what interfaces are, just code without them. Sooner or later you will run into a problem, where the use of interfaces will be the most natural thing to do.
An interface is really a contract that the implementing classes must follow, it is in fact the base for pretty much every design pattern I know.
In your example, the interface is created because then anything that IS A Pizza, which means implements the Pizza interface, is guaranteed to have implemented
public void Order();
After your mentioned code you could have something like this:
public void orderMyPizza(IPizza myPizza) {
//This will always work, because everyone MUST implement order
myPizza.order();
}
This way you are using polymorphism and all you care is that your objects respond to order().
I'm surprised that not many posts contain the one most important reason for an interface: Design Patterns. It's the bigger picture into using contracts, and although it's a syntax decoration to machine code (to be honest, the compiler probably just ignores them), abstraction and interfaces are pivotal for OOP, human understanding, and complex system architectures.
Let's expand the pizza analogy to say a full fledge 3 course meal. We'll still have the core Prepare() interface for all our food categories, but we'd also have abstract declarations for course selections (starter, main, dessert), and differing properties for food types (savoury/sweet, vegetarian/non-vegetarian, gluten free etc).
Based on these specifications, we could implement the Abstract Factory pattern to conceptualise the whole process, but use interfaces to ensure that only the foundations were concrete. Everything else could become flexible or encourage polymorphism, yet maintain encapsulation between the different classes of Course that implement the ICourse interface.
If I had more time, I'd like to draw up a full example of this, or someone can extend this for me, but in summary, a C# interface would be the best tool in designing this type of system.
Here's an interface for objects that have a rectangular shape:
interface IRectangular
{
Int32 Width();
Int32 Height();
}
All it demands is that you implement ways to access the width and height of the object.
Now let's define a method that will work on any object that is IRectangular:
static class Utils
{
public static Int32 Area(IRectangular rect)
{
return rect.Width() * rect.Height();
}
}
That will return the area of any rectangular object.
Let's implement a class SwimmingPool that is rectangular:
class SwimmingPool : IRectangular
{
int width;
int height;
public SwimmingPool(int w, int h)
{ width = w; height = h; }
public int Width() { return width; }
public int Height() { return height; }
}
And another class House that is also rectangular:
class House : IRectangular
{
int width;
int height;
public House(int w, int h)
{ width = w; height = h; }
public int Width() { return width; }
public int Height() { return height; }
}
Given that, you can call the Area method on houses or swimming-pools:
var house = new House(2, 3);
var pool = new SwimmingPool(3, 4);
Console.WriteLine(Utils.Area(house));
Console.WriteLine(Utils.Area(pool));
In this way, your classes can "inherit" behavior (static-methods) from any number of interfaces.
What ?
Interfaces are basically a contract that all the classes implementing the Interface should follow. They looks like a class but has no implementation.
In C# Interface names by convention is defined by Prefixing an 'I' so if you want to have an interface called shapes, you would declare it as IShapes
Now Why ?
Improves code re-usability
Lets say you want to draw Circle, Triangle.
You can group them together and call them Shapesand have methods to draw Circle and Triangle
But having concrete implementation would be a bad idea because tomorrow you might decide to have 2 more Shapes Rectangle & Square. Now when you add them there is a great chance that you might break other parts of your code.
With Interface you isolate the different implementation from the Contract
Live Scenario Day 1
You were asked to create an App to Draw Circle and Triangle
interface IShapes
{
void DrawShape();
}
class Circle : IShapes
{
public void DrawShape()
{
Console.WriteLine("Implementation to Draw a Circle");
}
}
Class Triangle: IShapes
{
public void DrawShape()
{
Console.WriteLine("Implementation to draw a Triangle");
}
}
static void Main()
{
List <IShapes> shapes = new List<IShapes>();
shapes.Add(new Circle());
shapes.Add(new Triangle());
foreach(var shape in shapes)
{
shape.DrawShape();
}
}
Live Scenario Day 2
If you were asked add Square and Rectangle to it, all you have to do is create the implentation for it in class Square: IShapes and in Main add to list shapes.Add(new Square());
An interface defines a contract between the provider of a certain functionality and the correspondig consumers. It decouples the implementation from the contract (interface). You should have a look at object oriented architecture and design. You may want to start with wikipedia: http://en.wikipedia.org/wiki/Interface_(computing)
There are a lot of good answers here but I would like to try from a slightlt different perspective.
You may be familiar with the SOLID principles of object oriented design. In summary:
S - Single Responsibility Principle
O - Open/Closed Principle
L - Liskov Substitution Principle
I - Interface Segregation Principle
D - Dependency Inversion Principle
Following the SOLID principles helps to produce code that is clean, well factored, cohesive and loosely coupled. Given that:
"Dependency management is the key challenge in software at every scale" (Donald Knuth)
then anything that helps with dependency management is a big win. Interfaces and the Dependency Inversion Principle really help to decouple code from dependencies on concrete classes, so code can be written and reasoned about in terms of behaviours rather than implementations. This helps to break the code into components which can be composed at runtime rather than compile time and also means those components can be quite easily plugged in and out without having to alter the rest of the code.
Interfaces help in particular with the Dependency Inversion Principle, where code can be componentized into a collection of services, with each service being described by an interface. Services can then be "injected" into classes at runtime by passing them in as a constructor parameter. This technique really becomes critical if you start to write unit tests and use test driven development. Try it! You will quickly understand how interfaces help to break apart the code into manageable chunks that can be individually tested in isolation.
Soo many answers!
Giving my best shot. hehe.
So to begin, yes you could have used a concrete base and derived class here. In that case, you would have to do an empty or useless implementation for the Prepare method in the base class also making this method virtual and then the derived classes would override this Prepare method for themselves. This case, the implementation of Prepare in Base class is useless.
The reason why you chose to use an Interface is because you had to define a contract, not an implementation.
There is a IPizza type and it provides a functionality to Prepare. This is contract. How it is prepared is the implementation and it is not your lookout. It is responsibility of the various Pizza implementations.
An interface or an abstract class is preferred here over a concrete base class because you had to create an abstraction, i.e., the Prepare method. You cannot create an abstract method in a concrete base class.
Now you could say, why not use an abstract class?
So, when you need to achieve 100% abstraction, you need to go with Interface. But when you need some abstraction along with a concrete implementation, go with abstract class. It means.
Example: Lets say all your pizzas will have a base and base preparation will be the same process. However, all pizza types and toppings will vary. In this case you could create an Abstract class with an abstract method Prepare and a concrete method PreparePizzaBase.
public abstract class Pizza{
// concrete method which is common to all pizzas.
public PizzaBase PreparePizzaBase(){
// code for pizza base preparation.
}
public abstract void Prepare();
}
public class DeluxePizza: Pizza{
public void Prepare(){
var base=PreparePizzaBase();
// prepare deluxe pizza on pizza base.
}
}
The main purpose of the interfaces is that it makes a contract between you and any other class that implement that interface which makes your code decoupled and allows expandability.
Therese are ask really great examples.
Another, in the case of a switch statement, you no longer have the need to maintain and switch every time you want rio perform a task in a specific way.
In your pizza example, if want to make a pizza, the interface is all you need, from there each pizza takes care of it's own logic.
This helps to reduce coupling and cyclomatic complexity. You have to still implement the logic but there will be less you have to keep track of in the broader picture.
For each pizza you can then keep track of information specific to that pizza. What other pizzas have doesn't matter because only the other pizzas need to know.
The simplest way to think about interfaces is to recognize what inheritance means. If class CC inherits class C, it means both that:
Class CC can use any public or protected members of class C as though they were its own, and thus only needs to implement things which do not exist in the parent class.
A reference to a CC can be passed or assigned to a routine or variable that expects a reference to a C.
Those two function of inheritance are in some sense independent; although inheritance applies both simultaneously, it is also possible to apply the second without the first. This is useful because allowing an object to inherit members from two or more unrelated classes is much more complicated than allowing one type of thing to be substitutable for multiple types.
An interface is somewhat like an abstract base class, but with a key difference: an object which inherits a base class cannot inherit any other class. By contrast, an object may implement an interface without affecting its ability to inherit any desired class or implement any other interfaces.
One nice feature of this (underutilized in the .net framework, IMHO) is that they make it possible to indicate declaratively the things an object can do. Some objects, for example, will want data-source object from which they can retrieve things by index (as is possible with a List), but they won't need to store anything there. Other routines will need a data-depository object where they can store things not by index (as with Collection.Add), but they won't need to read anything back. Some data types will allow access by index, but won't allow writing; others will allow writing, but won't allow access by index. Some, of course, will allow both.
If ReadableByIndex and Appendable were unrelated base classes, it would be impossible to define a type which could be passed both to things expecting a ReadableByIndex and things expecting an Appendable. One could try to mitigate this by having ReadableByIndex or Appendable derive from the other; the derived class would have to make available public members for both purposes, but warn that some public members might not actually work. Some of Microsoft's classes and interfaces do that, but that's rather icky. A cleaner approach is to have interfaces for the different purposes, and then have objects implement interfaces for the things they can actually do. If one had an interface IReadableByIndex and another interface IAppendable, classes which could do one or the other could implement the appropriate interfaces for the things they can do.
Interfaces can also be daisy chained to create yet another interface. This ability to implement multiple Interfaces give the developer the advantage of adding functionality to their classes without having to change current class functionality (SOLID Principles)
O = "Classes should be open for extension but closed for modification"
To me an advantage/benefit of an interface is that it is more flexible than an abstract class. Since you can only inherit 1 abstract class but you can implement multiple interfaces, changes to a system that inherits an abstract class in many places becomes problematic. If it is inherited in 100 places, a change requires changes to all 100. But, with the interface, you can place the new change in a new interface and just use that interface where its needed (Interface Seq. from SOLID). Additionally, the memory usage seems like it would be less with the interface as an object in the interface example is used just once in memory despite how many places implement the interface.
Interfaces are used to drive consistency,in a manner that is loosely coupled which makes it different to abstract class which is tightly coupled.That's why its also commonly defined as a contract.Whichever classes that implements the interface has abide to "rules/syntax" defined by the interface and there is no concrete elements within it.
I'll just give an example supported by the graphic below.
Imagine in a factory there are 3 types of machines.A rectangle machine,a triangle machine and a polygon machine.Times are competitive and you want to streamline operator training.You just want to train them in one methodology of starting and stopping machines so you have a green start button and red stop button.So now across 3 different machines you have a consistent way of starting and stopping 3 different types of machines.Now imagine these machines are classes and the classes need to have start and stop methods,how you going to drive consistency across these classes which can be very different? Interface is the answer.
A simple example to help you visualize,one might ask why not use abstract class? With an interface the objects don't have to be directly related or inherited and you can still drive consistency across different classes.
public interface IMachine
{
bool Start();
bool Stop();
}
public class Car : IMachine
{
public bool Start()
{
Console.WriteLine("Car started");
return true;
}
public bool Stop()
{
Console.WriteLine("Car stopped");
return false;
}
}
public class Tank : IMachine
{
public bool Start()
{
Console.WriteLine("Tank started");
return true;
}
public bool Stop()
{
Console.WriteLine("Tank stopped");
return false;
}
}
class Program
{
static void Main(string[] args)
{
var car = new Car();
car.Start();
car.Stop();
var tank = new Tank();
tank.Start();
tank.Stop();
}
}
class Program {
static void Main(string[] args) {
IMachine machine = new Machine();
machine.Run();
Console.ReadKey();
}
}
class Machine : IMachine {
private void Run() {
Console.WriteLine("Running...");
}
void IMachine.Run() => Run();
}
interface IMachine
{
void Run();
}
Let me describe this by a different perspective. Let’s create a story according to the example which i have shown above;
Program, Machine and IMachine are the actors of our story. Program wants to run but it has not that ability and Machine knows how to run. Machine and IMachine are best friends but Program is not on speaking terms with Machine. So Program and IMachine make a deal and decided that IMachine will tell to Program how to run by looking Machine(like a reflector).
And Program learns how to run by help of IMachine.
Interface provides communication and developing loosely coupled projects.
PS: I’ve the method of concrete class as private. My aim in here is to achieve loosely coupled by preventing accessing concrete class properties and methods, and left only allowing way to reach them via interfaces. (So i defined interfaces’ methods explicitily).
These 2-3 last years, many projects I see, like Cuyahoga open source C# CMS, tends to define persistent and non persistent classes as Interface. Why? Is there a good reason? TDD? Mocking? A design pattern? ...
The main reason is that this makes techniques like dependency injection easier. This in turn allows for more flexibility in the software and easier reuse and recombination of existing code. Examples for where this is useful include the various forms of unit testing (as you mentioned), but also most other forms of "regular" code reuse.
A simple example:
Say you have a method that calculates emplyoee salaries. As part of its signature, it accepts an object that calculates their benefits, say an instance of BenefitCalculator:
calculateSalary(... BenefitCalculator bc, ...)
Originally, your design has only one class BenefitCalculator. But later, it turns out that you need more than one class, e.g. because different parts of the software are supposed to use different algorithms (maybe to support different countries, or because the algorithm is supposed to be user-configurable...). In that case, rather than bloat the existing implementation of BenefitCalculator, it makes sense to create new class(es), e.g. BenefitCalculatorFrance, or BenefitCalculatorSimple etc.
Now if you use the signature
calculateSalary(... BenefitCalculator bc, ...)
, you are kind of screwed, because you cannot supply different implementations. If however you use
calculateSalary(... IBenefitCalculator
bc, ...)
you can just have all classes implement the interface.
This is actually just a special case of "loose coupling": Demand as little as possible from other parts of the code. In this case, don't demand a certain class; instead just demand that certain methods exist, which is just what an Interface does.
First of all, you can't define a class as an interface. Your class implements an interface.
Interfaces are used as one way to enable polymorphic behavior. Each class that implements the interface is free to specify its own implementation of the methods defined in the interface. Take the following for example:
You are writing banking software. Your task is to write a Transaction Processor. Now, you know you need to handle different kinds of Transactions (Deposits, Withdraws, Transfers). You could write code that looks like:
public class TransactionProcessor
{
public void ProcessDeposit( // Process Deposit );
public void ProcessWithdraw( // Process Withdraw );
public void ProcessTransfer( // Process Transfer );
}
And then every time somebody adds a new Transaction type, you have to modify your class. Or, you could:
public interface ITransaction { void Process(); }
public class TransactionProcessor
{
public void ProccessTransaction(ITransaction t) { t.Process(); }
}
Now you don't need to modify your code to Process a new type of transaction. You just need people to create their own class that implements ITransaction and your class will "just handle it".
This allows you to swap implementations of an interface depending on your needs. It also enables things like Dependency Injection and Mocking Frameworks for Unit Testing.
In general though, it really is just another way to make your code more flexible.
Interfaces have the advantage that they make you independent from the implementation, which is a good thing.
During last years IoC containers become quite popular with developers.
For example, Unity Container from Microsoft Practices. So, at the start of your application you can register concrete classes which implement interfaces, and then, for example, all classes which contain these interfaces in their constructors, or their properties marked with [Dependency] attribute will be filled, when instancing objects via Unity container's resolve. Its quite useful in the apps with complicated dependencies, when one interface can be implemented in three different classed.
And all these things can't be achieved without usage of interfaces.
At a really boring level interfaces can also help make for a faster compile.
public class A {
B b;
}
public class B {
public int getCount() {
return 10;
}
}
In this case every time internal changes to B are made, the compiler needs to re-evaluate A to determine if it needs to be recompiled.
Instead we use interfaces:
class A {
IB b;
}
interface IB {
int getCount();
}
class B : IB {
public int getCount() {
return 10;
}
}
In this case A only depends on IB. No change to B requires any consideration of A at compile time.
At scale this effect on short circuiting dependency evaluation can significantly speed up compilation of large code bases. It is particularly powerful when there are a lot of classes depending on a single class that changes a lot.
Clearly this compile time benefit only works if the classes have no static dependency on the implementation classes. Doing the following would totally defeat this benefit:
class A {
IB b = new B();
}
This is where Dependency Injection comes in. The DI container would construct a B and provide it to A as an IB so A doesn't need to have the static dependency.
I am new to C#. Recently I have read an article.It suggests
"One of the practical uses of interface is, when an interface reference is created that can
work on different kinds of objects which implements that interface."
Base on that I tested (I am not sure my understanding is correct)
namespace InterfaceExample
{
public interface IRide
{
void Ride();
}
abstract class Animal
{
private string _classification;
public string Classification
{
set { _classification = value;}
get { return _classification;}
}
public Animal(){}
public Animal(string _classification)
{
this._classification = _classification;
}
}
class Elephant:Animal,IRide
{
public Elephant(){}
public Elephant(string _majorClass):base(_majorClass)
{
}
public void Ride()
{
Console.WriteLine("Elephant can ride 34KPM");
}
}
class Horse:Animal,IRide
{
public Horse(){}
public Horse(string _majorClass):base(_majorClass)
{
}
public void Ride()
{
Console.WriteLine("Horse can ride 110 KPH");
}
}
class Test
{
static void Main()
{
Elephant bully = new Elephant("Vertebrata");
Horse lina = new Horse("Vertebrata");
IRide[] riders = {bully,lina};
foreach(IRide rider in riders)
{
rider.Ride();
}
Console.ReadKey(true);
}
}
}
Questions :
Beyond such extend, what are the different way can we leverage the elegance of Interfaces ?
What is the Key point that I can say this can be only done by interface (apart from
multiple inheritances) ?
(I wish to gather the information from experienced hands).
Edit :
Edited to be concept centric,i guess.
The point is, you could also have a class Bike which implements IRide, without inheriting from Animal. You can think of an interface as being an abstract contract, specifying that objects of this class can do the things specified in the interface.
Because C# doesn't support multiple inheritance (which is a good thing IMHO) interfaces are the way you specify shared behavior or state across otherwise unrelated types.
interface IRideable
{
void Ride();
}
class Elephant : Animal, IRideable{}
class Unicycle: Machine, IRideable{}
In this manner, say you had a program that modeled a circus (where machines and animals had distinct behavior, but some machines and some animals could be ridden) you can create abstract functionality specific to what is means to ride something.
public static void RideThemAll(IEnumerable<IRideable> thingsToRide)
{
foreach(IRideable rideable in thingsToRide)
ridable.Ride();
}
As Lucero points out, you could implement other classes that implement IRide without inherting from Animal and be able to include all of those in your IRide[] array.
The problem is that your IRide interface is still too broad for your example. Obviously, it needs to include the Ride() method, but what does the Eat() method have to do with being able to ride a "thing"?
Interfaces should thought of as a loose contract that guarantees the existance of a member, but not an implementation. They should also not be general enough to span "concepts" (eating and riding are two different concepts).
You are asking the difference between abstract classes and interfaces. There is a really good article on that here.
Another great advantage is lower coupling between software components. Suppose you want to be able to feed any rideable animal. In this case you could write the following method:
public void Feed(IRide rideable)
{
//DO SOMETHING IMPORTANT HERE
//THEN DO SOMETHING SPECIFIC TO AN IRide object
rideable.Eat();
}
The major advantage here is that you can develop and test the Feed method without having any idea of the implementation of IRide passed in to this method. It could be an elephant, horse, or donkey. It doesn't matter. This also opens up your design for using Inversion of Control frameworks like Structure Map or mocking tools like Rhino Mock.
Interfaces can be used for "tagging" concepts or marking classes with specifically functionality such as serializable. This metadata (Introspection or Reflection) can be used with powerful inversion-of-control frameworks such as dependency injection.
This idea is used throughout the .NET framework (such as ISerializable) and third-party DI frameworks.
You already seem to grasp the general meaning of Interfaces.
Interfaces are just a contract saying "I support this!" without saying how the underlying system works.
Contrast this to a base or abstract class, which says "I share these common properties & methods, but have some new ones of my own!"
Of course, a class can implement as many interfaces as it wants, but can only inherit from one base class.
I have seen arguments for using explicit interfaces as a method of locking a classes usage to that interface. The argument seems to be that by forcing others to program to the interface you can ensure better decoupling of the classes and allow easier testing.
Example:
public interface ICut
{
void Cut();
}
public class Knife : ICut
{
void ICut.Cut()
{
//Cut Something
}
}
And to use the Knife object:
ICut obj = new Knife();
obj.Cut();
Would you recommend this method of interface implementation? Why or why not?
EDIT:
Also, given that I am using an explicit interface the following would NOT work.
Knife obj = new Knife();
obj.Cut();
To quote GoF chapter 1:
"Program to an interface, not an implementation".
"Favor object composition over class inheritance".
As C# does not have multiple inheritance, object composition and programming to interfaces are the way to go.
ETA: And you should never use multiple inheritance anyway but that's another topic altogether.. :-)
ETA2: I'm not so sure about the explicit interface. That doesn't seem constructive. Why would I want to have a Knife that can only Cut() if instansiated as a ICut?
I've only used it in scenarios where I want to restrict access to certain methods.
public interface IWriter
{
void Write(string message);
}
public interface IReader
{
string Read();
}
public class MessageLog : IReader, IWriter
{
public string Read()
{
// Implementation
return "";
}
void IWriter.Write(string message)
{
// Implementation
}
}
public class Foo
{
readonly MessageLog _messageLog;
IWriter _messageWriter;
public Foo()
{
_messageLog = new MessageLog();
_messageWriter = _messageLog;
}
public IReader Messages
{
get { return _messageLog; }
}
}
Now Foo can write messages to it's message log using _messageWriter, but clients can only read. This is especially beneficial in a scenario where your classes are ComVisible. Your client can't cast to the Writer type and alter the information inside the message log.
Yes. And not just for testing. It makes sense to factor common behaviour into an interface (or abstract class); that way you can make use of polymorphism.
public class Sword: ICut
{
void ICut.Cut()
{
//Cut Something
}
}
Factory could return a type of sharp implement!:
ICut obj = SharpImplementFactory();
obj.Cut();
This is a bad idea because their usage breaks polymorphism. The type of the reference used should NOT vary the behavior of the object. If you want to ensure loose coupling, make the classes internal and use a DI technology (such as Spring.Net).
There are no doubt certain advantages to forcing the users of your code to cast your objects to the interface types you want them to be using.
But, on the whole, programming to an interface is a methodology or process issue. Programming to an interface is not going to be achieved merely by making your code annoying to the user.
Using interfaces in this method does not, in and of itself, lead to decoupled code. If this is all you do, it just adds another layer of obfuscation and probably makes this more confusing later on.
However, if you combine interface based programming with Inversion of Control and Dependency Injection, then you are really getting somewhere. You can also make use of Mock Objects for Unit Testing with this type of setup if you are into Test Driven Development.
However, IOC, DI and TDD are all major topics in and of themselves, and entire books have been written on each of those subjects. Hopefully this will give you a jumping off point of things you can research.
Well there is an organizational advantage. You can encapsulate your ICuttingSurface, ICut and related functionality into an Assembly that is self-contained and unit testable. Any implementations of the ICut interface are easily Mockable and can be made to be dependant upon only the ICut interface and not actual implementations which makes for a more modular and clean system.
Also this helps keep the inheritance more simplified and gives you more flexibility to use polymoprhism.
Allowing only callers expecting to explicit interface type ensures methods are only visible in the context they are needed in.
Consider a logical entity in a game and u decide that instead of a class responsibile for drawing/ticking the entities you want the code for tick/draw to be in the entity.
implement IDrawable.draw() and ITickable.tick() ensures an entity can only ever be drawn/ticked when the game expects it to. Otherwise these methods wont ever be visible.
Lesser bonus is when implementing multiple interfaces, explicit implementations let you work around cases where two interface method names collide.
Another potential scenario for explicitly implementing an interface is when dealing with an existing class that already implements the functionality, but uses a different method name. For example, if your Knife class already had a method called Slice, you could implement the interface this way:
public class Knife : ICut
{
public void Slice()
{
// slice something
}
void ICut.Cut()
{
Slice();
}
}
If the client code doesn't care about anything other than the fact that it can use the object to Cut() things, then use ICut.
Yes, but not necessarily for the given reasons.
An example:
On my current project, we are building a tool for data entry. We have certain functions that are used by all (or almost all) tabs, and we are coding a single page (the project is web-based) to contain all of the data entry controls.
This page has navigation on it, and buttons to interact with all the common actions.
By defining an interface (IDataEntry) that implements methods for each of the functions, and implementing that interface on each of the controls, we can have the aspx page fire public methods on the user controls which do the actual data entry.
By defining a strict set of interaction methods (such as your 'cut' method in the example) Interfaces allow you to take an object (be it a business object, a web control, or what have you) and work with it in a defined way.
For your example, you could call cut on any ICut object, be it a knife, a saw, a blowtorch, or mono filament wire.
For testing purposes, I think interfaces are also good. If you define tests based around the expected functionality of the interface, you can define objects as described and test them. This is a very high-level test, but it still ensures functionality. HOWEVER, this should not replace unit testing of the individual object methods...it does no good to know that 'obj.Cut' resulted in a cutting if it resulted in the wrong thing being cut, or in the wrong place.