Develop Reference

Simple phone number regex to match numbers, spaces, etc

I'm trying to modify a fairly basic regex pattern in C# that tests for phone numbers.
The patterns is -
[0-9]+(\.[0-9][0-9]?)?
I have two questions -
1) The existing expression does work (although it is fairly restrictive) but I can't quite understand how it works. Regexps for similar issues seem to look more like this one -
/^[0-9()]+$/
2) How could I extend this pattern to allow brackets, periods and a single space to separate numbers. I tried a few variations to include -
[0-9().+\s?](\.[0-9][0-9]?)?
Although i can't seem to create a valid pattern.
Any help would be much appreciated.
Thanks,

[0-9]+(\.[0-9][0-9]?)?
First of all, I recommend checking out either regexr.com or regex101.com, so you yourself get an understanding of how regex works. Both websites will give you a step-by-step explanation of what each symbol in the regex does.
Now, one of the main things you have to understand is that regex has special characters. This includes, among others, the following: []().-+*?\^$. So, if you want your regex to match a literal ., for example, you would have to escape it, since it's a special character. To do so, either use \. or [.]. Backslashes serve to escape other characters, while [] means "match any one of the characters in this set". Some special characters don't have a special meaning inside these brackets and don't require escaping.
Therefore, the regex above will match any combination of digits of length 1 or more, followed by an optional suffix (foobar)?, which has to be a dot, followed by one or two digits. In fact, this regex seems more like it's supposed to match decimal numbers with up to two digits behind the dot - not phone numbers.
/^[0-9()]+$/
What this does is pretty simple - match any combination of digits or round brackets that has the length 1 or greater.
[0-9().+\s?](\.[0-9][0-9]?)?
What you're matching here is:
one of: a digit, round bracket, dot, plus sign, whitespace or question mark; but exactly once only!
optionally followed by a dot and one or two digits
A suitable regex for your purpose could be:
(\+\d{2})?((\(0\)\d{2,3})|\d{2,3})?\d+
Enter this in one of the websites mentioned above to understand how it works. I modified it a little to also allow, for example +49 123 4567890.
Also, for simplicity, I didn't include spaces - so when using this regex, you have to remove all the spaces in your input first. In C#, that should be possible with yourString.Replace(" ", ""); (simply replacing all spaces with nothing = deleting spaces)

The + after the character set is a quantifier (meaning the preceeding character, character set or group is repeated) at least one, and unlimited number of times and it's greedy (matched the most possible).
Then [0-9().+\s]+ will match any character in set one or more times.

Regular expression for specific combination of alphabets and numbers

I am trying to create regular expression for following type of strings:
combination of the prefix (XI/ YV/ XD/ YQ/ XZ), numerical digits only, and either no ‘Z’ or a ‘Z’ suffix.
For example, XD35Z should pass but XD01HW should not pass.
So far I tried following:
#"XD\d+Z?" - XD35Z passes but unfortunately it also works for XD01HW
#"XD\d+$Z" - XD01HW fails which is what I want but XD35Z also fails
I have also tried #"XD\d{1,}Z"? but it did not work
I need a single regex which will give me appropriate results for both types of strings.

Try this regex:
^(XI|YV|XD|YQ|XZ){1}\d+Z{0,1}$
I'm using quantifying braces to explicitly limit the allowed numbers of each character/group. And the ^ and $ anchors make sure that the regex matches only the whole line (string).
Broken into logical pieces this regex checks
^(XI|YV|XD|YQ|XZ){1} Starts with exactly one of the allowed prefixes
\d+ Is follow by one or more digits
Z{0,1}$ Ends with between 0 and 1 Z

You're misusing the $ which represents the end of the string in the Regex
It should be : #"^XD\d+Z?$" (notice that it appears at the end of the Regex, after the Z?)

The regex following the behaviour you want is:
^(XI|YV|XD|YQ|XZ)\d+Z?$
Explanation:
combination of the prefix (XI/ YV/ XD/ YQ/ XZ)
^(XI|YV|XD|YQ|XZ)
numerical digits only
\d+
‘Z’ or a ‘Z’ suffix
Z?$

Matching a number preceeded by a know string, followed by an unknown number of characters

[SOME_WORDS:200:1000]
Trying to match just the last 1000 part. Both numbers are variable and can contain an unknown number of characters (although they are expected to contain digits, I cannot rule out that they may also contain other characters). The SOME_WORDS part is known and does not change.
So I begin by doing a positive lookbehind for [SOME_WORDS: followed by a positive lookahead for the trailing ]
That gives us the pattern (?<=\[SOME_WORDS:).*(?=])
And captures the part 200:1000
Now because I don't know how many characters are after SOME_WORDS:, but I know that it ends with another : I use .*: to indicate any character any amount of time followed by :
That gives us the pattern (?<=\[SOME_WORDS:.*:).*(?=])
However at this point the pattern no longer matches anything and this is where I become confused. What am I doing wrong here?
If I assume that the first number will always be 3 characters long I can replace .* with ... to get the pattern (?<=\[SOME_WORDS:...:).*(?=]) and this correctly captures just the 1000 part. However I don't understand why replacing ... with .* makes the pattern not capture anything.
EDIT:
It seems like the online tool I was using to test the regex pattern wasn't working correctly. The pattern (?<=\[SOME_WORDS:.*:).*(?=]) matches the 1000 with no issues when actually done in .net

You usually cannot use a + or a * in a lookbehind, only in a lookahead.
If c# does allow these than you could use a .*? instead of a .* as the .* will eat the second :
Try this:
(?<=\[SOME_WORDS:)(?=\d+:(\d+)])
The match wil be in the first capture group
Quote from http://www.regular-expressions.info/lookaround.html
The bad news is that most regex flavors do not allow you to use just any regex inside a lookbehind, because they cannot apply a regular expression backwards. The regular expression engine needs to be able to figure out how many characters to step back before checking the lookbehind. When evaluating the lookbehind, the regex engine determines the length of the regex inside the lookbehind, steps back that many characters in the subject string, and then applies the regex inside the lookbehind from left to right just as it would with a normal regex.

As Robert Smit mentions this is due to the * being a greedy operator. Greedy operators consume as many characters as they possibly can when they are matched first. They only give up characters if the match fails. If you make the greedy operator lazy(*?), then matching consumes as little number of characters as possible for the match to succeed, so the : is not consumed by *. You can also use [^:]* which is match any character other than :.

What does .* do in regex?

After extensive search, I am unable to find an explanation for the need to use .* in regex. For example, MSDN suggests a password regex of
#\"(?=.{6,})(?=(.*\d){1,})(?=(.*\W){1,})"
for length >= 6, 1+ digit and 1+ special character.
Why can't I just use:
#\"(?=.{6,})(?=(\d){1,})(?=(\W){1,})"

.* just means "0 or more of any character"
It's broken down into two parts:
. - a "dot" indicates any character
* - means "0 or more instances of the preceding regex token"
In your example above, this is important, since they want to force the password to contain a special character and a number, while still allowing all other characters. If you used \d instead of .*, for example, then that would restrict that portion of the regex to only match decimal characters (\d is shorthand for [0-9], meaning any decimal). Similarly, \W instead of .*\W would cause that portion to only match non-word characters.
A good reference containing many of these tokens for .NET can be found on the MSDN here: Regular Expression Language - Quick Reference
Also, if you're really looking to delve into regex, take a look at http://www.regular-expressions.info/. While it can sometimes be difficult to find what you're looking for on that site, it's one of the most complete and begginner-friendly regex references I've seen online.

Just FYI, that regex doesn't do what they say it does, and the way it's written is needlessly verbose and confusing. They say it's supposed to match more than seven characters, but it really matches as few as six. And while the other two lookaheads correctly match at least one each of the required character types, they can be written much more simply.
Finally, the string you copied isn't just a regex, it's an XML attribute value (including the enclosing quotes) that seems to represent a C# string literal (except the closing quote is missing). I've never used a Membership object, but I'm pretty sure that syntax is faulty. In any case, the actual regex is:
(?=.{6,})(?=(.*\d){1,})(?=(.*\W){1,})
..but it should be:
(?=.{8,})(?=.*\d)(?=.*\W)
The first lookahead tries to match eight or more of any characters. If it succeeds, the match position (or cursor, if you prefer) is reset to the beginning and the second lookahead scans for a digit. If it finds one, the cursor is reset again and the third lookahead scans for a special character. (Which, by the way, includes whitespace, control characters, and a boatload of other esoteric characters; probably not what the author intended.)
If you left the .* out of the latter two lookaheads, you would have (?=\d) asserting that the first character is a digit, and (?=\W) asserting that it's not a digit. (Digits are classed as word characters, and \W matches anything that's not a word character.) The .* in each lookahead causes it to initially gobble up the whole string, then backtrack, giving back one character at a time until it reaches a spot where the \d or \W can match. That's how they can match the digit and the special character anywhere in the string.

The .* portion just allows for literally any combination of characters to be entered. It's essentially allowing for the user to add any level of extra information to the password on top of the data you are requiring
Note: I don't think that MSDN page is actually suggesting that as a password validator. It is just providing an example of a possible one.

Tricky Regular Expression

I need to allow only alphanumeric characters (with uppercase) from 0-25 chars length and no lazy all-repetition numeric value.
I've got the first part: Regex.IsMatch(tmpResult, "^[0-9A-Z]{0,25}$"); (that's easy)
111112 - match
AABD333434 - match
55555555 - no match
555 - no match
Could anyone please help me with this?

^(?!(.)\1*$)[0-9A-Z]{0,25}$
The extra (?!(.)\1*$) will reject any strings that is composed of repeating same character.
The (?!…) is a negative lookahead that will cause the primary regex fail if the … is matched, and the (.)\1* will match a string of repeating characters.

You could just do it using a normal method... Once you have it match your first expression there, just use a subroutine to iterate through each character and return true the first time you encounter a character that differs from the first in the string.
It should return true after checking only the first 2 characters for most strings, unless it's an invalid string.
This should be equally as fast as a regex if not faster, if it is well implemented.