Consider the following dictionaries:
Dictionary<string, double> dict1 = new Dictionary<string, double>()
Dictionary<string, double> dict2 = new Dictionary<string, double>()
The two dictionaries have the exact same keys, but the values are different. I would like to merge the two dictionaries the following way: Create a new dictionary with the same keys as dict1 and dict2, and where the value is an array composed of the matching value in dict1, and the matching value in dict2, for each key.
I can easily do that in a loop, but I was hoping there is a more efficient way of doing it.
Any help would be appreciated! Thank you!
This assumes they really do have the same keys:
var merged = dict1.ToDictionary(pair => pair.Key,
pair => new[] { pair.Value, dict2[pair.Key] });
Or to create a Dictionary<string, Tuple<double, double>>
var merged = dict1.ToDictionary(pair => pair.Key,
pair => Tuple.Create(pair.Value, dict2[pair.Key]));
Or using an anonymous type to make it cleaner if you're going to use it inside the same method:
var merged = dict1.ToDictionary(pair => pair.Key,
pair => new { First = pair.Value,
Second = dict2[pair.Key]) });
As noted in comments, these all still loop internally - they won't be more efficient than writing the loop yourself, but it's nicer to read.
Related
I have a Dictionary<string, int> where the string is a randomized collection of characters and the int is the ASCII sum of that string.
e.g.
["aaaaaaaaab", 971],
["aaaaaaaaba", 971],
["aaaaaaabaa", 971],
["aaaaaabaaa", 971]
I would like to make a new dictionary from the original where the new key is the value from the original, and the new value is the List<string> which would contain all the strings with the key as the ASCII sum.
e.g.
[971, List<string>{ "aaaaaaaaab", "aaaaaaaaba", "aaaaaaabaa", "aaaaaabaaa"}]
How can I achieve this? I cannot wrap my head around the required steps.
Use could GroupBy and ToDictionary
The premise is :
group by the old Value
project to a new dictionary given the values of the GroupBy
which will be the grouped list of KeyValuePair from the original dictionary, that in-turn has the key selected out of it (.Select(y => y.Key)
Example
var newDict = old.GroupBy(x => x.Value)
.ToDictionary(x => x.Key, x => x.Select(y => y.Key)
.ToList());
Additional Resources
Enumerable.GroupBy Method
Groups the elements of a sequence.
Enumerable.ToDictionary Method
Creates a Dictionary<TKey,TValue> from an IEnumerable<T>.
Since values are not unique, you need to group by Value before converting to dictionary:
var inverse = original
.GroupBy(p => p.Value)
.ToDictionary(g => g.Key, g => g.Select(p => p.Key).ToList());
If you wanted to do this without Linq, you could do the following:
foreach(KeyValuePair<string, int> entry in dict) {
if(!dict2.ContainsKey(entry.Value)) {
dict2[entry.Value] = new List<string>();
}
dict2[entry.Value].Add(entry.Key);
}
Assuming you have dict defined as Dictionary<string, int> dict and dict2 defined as Dictionary<int, List<string>> dict2
Here is a complete example for anyone that wants to "wrap their head around" how to do this, without LINQ.
using System;
using System.Collections.Generic;
public class Program
{
public static void Main()
{
Dictionary<string,int> origDict = new Dictionary<string,int>{{"tttt",1},{"fttt",1},{"fftt",2}};
var vals = new int[origDict.Count];
origDict.Values.CopyTo(vals,0);
var keys = new string[origDict.Count];
origDict.Keys.CopyTo(keys,0);
Dictionary<int,List<string>> newDict = new Dictionary<int,List<string>>();
for(int i = 0; i < vals.Length; i++){
int val = vals[i];
if(newDict.ContainsKey(val)){
newDict[val].Add(keys[i]);
}else{
newDict[val] = new List<string>();
newDict[val].Add(keys[i]);
}
}
foreach(var key in newDict.Keys){
Console.WriteLine(key);
foreach(var val in newDict[key]){
Console.WriteLine(val);
}
}
}
}
Output:
1
tttt
fttt
2
fftt
I have 2 dictionaries as below
Dictionary<string, string> first= new Dictionary<string, string>();
Dictionary<string, string> second = new Dictionary<string, string>();
first.Add("NAME", "NAME");
first.Add("TYPE", "TYPE");
first.Add("REF","REF");
first.Add("NUMBER", "NUMBER");
first.Add("DATE", "DATE");
first.Add("SOURCE", "SOURCE");
second.Add("TYPE", "T1");
second.Add("REF","A1234");
second.Add("NUMBER", "B456");
second.Add("DATE", "D123455");
second.Add("NAME", "NAME");
second.Add("SOURCE", "SOURCE");
How to achieve a resulting dictionary like below
("NAME", "NAME");
("TYPE", "T1");
("REF","A1234");
("NUMBER", "B456");
("DATE", "D123455");
("SOURCE", "SOURCE");
Ideally first and second merged together with the values from second merged onto first and the keys should retain in the order of first dictionary.
Could anyone suggest the best approach to achieve this, Thanks.
var result = first.Union(second)
.GroupBy(x => x.Key)
.Select(x => new { Key = x.Key, Value = x.Last().Value })
.ToDictionary(x => x.Key, x => x.Value);
First you are union both of collections, after that group them by the keys selects the Last().Value for the value and converting it again to Dictionary.
Here Full example
I have a Dictionary like this:
Dictionary<string, object> properties = new Dictionary<string, object>()
{
{"aa:bb", MyObject1},
{"aa:cc", MyObject2},
{"dd:xx", MyObject3},
{"dd:yy", MyObject4}
};
The key of the dictionary is a string with ':' as delimiter. Now I want do create from that Dictionary a new one:
Dictionary<string, object> ddProperties = new Dictionary<string, object>()
{
{"xx", MyObject3},
{"yy", MyObject4}
};
I'm looking for an elegant way to create the new Dictionary by splitting the key of the original Dictionary. Is that possible with LINQ?
Try:
var ddProperties = properties.ToDictionary
(kvp => kvp.Key.Split(':')[1], kvp => kvp.Value);
If you only need the ones beginning with dd (as can be seen in your sample output), I would do:
var filteredPairs = from kvp in properties
let split = kvp.Key.Split(':')
where split[0] == "dd"
select new { Key = split[1], kvp.Value };
var ddProperties = filteredPairs.ToDictionary(kvp => kvp.Key, kvp => kvp.Value);
Do note that there is no protection against duplicates here. If you're expecting duplicate keys after transformation, how would you like to handle them?
note that since each entry is multiple results, use .SelectMany().
As mentioned, ToDictionary builds dictionaries nicely
properties
.SelectMany(kvp => kvp.Key.Split(':')
// Select each item in the split
// to gain access to the original Key Value Pair parameter
.Select(key => new { Key = key, Value = kvp.Value }))
.ToDictionary(
a => a.Key,
a => a.Value);
I have two equally sized arrays, arrayKeys and arrayValues filled with data, respectively for Keys and Values, and an empty Dictionary<K, V>(myDictionary). I would like to assign as Keys and Values of the Dictionary the elements in each array. I know that this can be done by using the following code:
for(i=0:i<arrayKeys.Lenght;i++)
{
myDictionary.Add(arrayKeys[i], arrayValue[i]);
}
but I would like to know whether is there any way to perform the assignment as follows:
myDictionary.Keys = arrayKeys;
myDictionary.Values = arrayValues;
maybe by using lambdas with the ToDictionary method. Thanks in advance
Francesco
You can write
myDictionary = keys.Zip(values, (k, v) => new { k, v })
.ToDictionary(o => o.k, o => o.v);
You can't assign them directly, but you can use some variant of:
var myDict = arrayKeys.Select((item, i) => new { Key = item, Value = arrayValues[i] })
.ToDictionary(kvp => kvp.Key, kvp => kvp.Value);
No, you cannot do that.
Because of the way that Dictionary works, you have to insert each KeyValuePair<K, V> at the same time (since the location of the value is determined by the hash of the key).
This is kind-of related to this question, on how to merge two dictionaries in C#. An elegant Linq solution is presented, which is cool.
However, that question relates to Dictionary<Object1, Object2>, whereas I have a dictionary where the value is a List<Object2>.
I am looking for a solution for merging a Dictionary<Object1, List<Object2>>, with the following requirements:
If Dictionary1 contains the same key as Dictionary2, then their List<Object2> lists should be combined. You would end up with a new key-value-pair with the shared key, and the combined lists from the two dictionaries.
If Dictionary1 contains a key that Dictionary2 doesn't then the List<Object2> list from Dictionary1 should become the value, and vice versa.
This may not be possible in Linq, or it may be worth writing it out longhand with for loops and the like, but it would be nice to have an elegant solution.
I would suggest creating your own extension method. It will be more efficient and easier to modify.
public static void MergeDictionaries<OBJ1, OBJ2>(this IDictionary<OBJ1, List<OBJ2>> dict1, IDictionary<OBJ1, List<OBJ2>> dict2)
{
foreach (var kvp2 in dict2)
{
// If the dictionary already contains the key then merge them
if (dict1.ContainsKey(kvp2.Key))
{
dict1[kvp2.Key].AddRange(kvp2.Value);
continue;
}
dict1.Add(kvp2);
}
}
The difficulty is dealing with the merging of key conflicts.
If we start by flattening all the input dictionaries using SelectMany, we can group together the elements by their key.
var result = dictionaries
.SelectMany(dict => dict)
.GroupBy(kvp => kvp.Key)
The result set contains groups where each group's key is a key from the original dictionaries, and the contents of the group are an IEnumerable<List<T>> of the lists with the same key. From these groups, we can merge all List<T> into a single IEnumerable<T> using a Select transformation with SelectMany.
var result = dictionaries
.SelectMany(dict => dict)
.GroupBy(kvp => kvp.Key)
.Select(grp => new { Key = grp.Key, Items = grp.SelectMany(list => list)})
We can then get a dictionary from this using a ToDictionary transformation, converting the IEnumerable<T> back to a List<T>.
var result = dictionaries
.SelectMany(dict => dict)
.GroupBy(kvp => kvp.Key)
.Select(grp => new { Key = grp.Key, Items = grp.SelectMany(list => list)})
.ToDictionary(kip => kip.Key, kip => new List<T>(kip.Items));
Updated in response to comment
You can populate dictionaries however you like. I have assumed it is a type which implements IEnumerable<IDictionary<TKey, List<T>>> for a TKey and T of your choosing.
The simplest way would be using a List<T> as follows:
List<IDictionary<TKey, List<T>>> dictionaries
= new List<IDictionary<TKey, List<T>>>();
dictionaries.Add(dictionary1); // Your variable
dictionaries.Add(dictionary2); // Your variable
// Add any other dictionaries here.
// Code as above!
You just need to change item merging part in solution to the previous problem.
For object we have this:
.ToDictionary(group => group.Key, group => group.First())
i.e. for duplicated items, just take the first one.
But we could use this:
.ToDictionary(group => group.Key, group => group.SelectMany(list => list).ToList());
to concatenate lists.
So, the final expression would be
var result = dictionaries.SelectMany(dict => dict)
.ToLookup(pair => pair.Key, pair => pair.Value)
.ToDictionary(group => group.Key,
group => group.SelectMany(list => list).ToList());
You could try a different merging expression if you need some extra list merging logic (e.g. only merge distinct items)
I'll be the first to admit that this is not all that pretty but this works for me.
var d1 = new Dictionary<string, List<string>>();
var d2 = new Dictionary<string, List<string>>();
d1["test"] = new List<string>() { "Stockholm", "Motala" };
d1["more"] = new List<string>() { "numerous", "populous", "bigger", "plentiful" };
d2["test"] = new List<string>() { "Washington", "Charlottesville" };
d2["less"] = new List<string>() { "insufficient", "small", "imperceptible" };
var intersect = (from key in d1.Keys.Intersect(d2.Keys) select new { Key = key, Value = new List<string>(d1[key].Concat(d2[key])) }).ToDictionary(d => d.Key, d => d.Value);
var merged = d1.Concat(d2).Where(d => !intersect.Keys.Contains(d.Key)).Concat(intersect).ToDictionary(d => d.Key, d => d.Value);