I am trying to upload csv file with size 1.10 gb and i would like to allow user to upload file up to size 10 gb.
Web.config settings :
<system.web>
<authentication mode="None" />
<compilation debug="true" targetFramework="4.5" />
<httpRuntime maxRequestLength="10240000" targetFramework="4.5" /> <!-- this will file upload up to 10 gb-->
</system.web>
<system.webServer>
<security>
<requestFiltering>
<requestLimits maxAllowedContentLength="10240000" /><!-- iis setting to handle file upload up to 10 gb-->
</requestFiltering>
</security>
<modules>
<remove name="FormsAuthentication" />
</modules>
</system.webServer>
Error:
Above settings are based on this reference.
I am using ng-File Upload to upload file to server.
Increase the value of maxAllowedContentLength. Maximum value of maxAllowedContentLength is 4,294,967,295 bytes = 3,99 gb.
You can set it to 3.99 GB max. According to MSDN maxAllowedContentLength has type uint, its maximum value is 4,294,967,295 bytes = 3.99 GB
I'm having the seuinte error when trying to debug my application.
HTTP Error 404.13 - Not Found
The request filtering module is configured to deny a request that
exceeds the request content size .
Check configuration/system.webServer/security/requestFiltering/requestLimits#maxAllowedContentLength setting in applicationhost.config or web.config file.
My web.config
<system.webServer>
<modules>
<remove name="FormsAuthentication" />
<remove name="ApplicationInsightsWebTracking" />
<add name="ApplicationInsightsWebTracking" type="Microsoft.ApplicationInsights.Web.ApplicationInsightsHttpModule, Microsoft.AI.Web" preCondition="managedHandler" />
</modules>
<validation validateIntegratedModeConfiguration="false" />
<security>
<requestFiltering>
<requestLimits maxAllowedContentLength="31457280"/>
</requestFiltering>
</security> </system.webServer>
More Information:
This and a security feature . NOT Change a Less Than the scope of the change is fully understood. Fast You CAN configure IIS server to reject requests Whose content is greater than hum value specified . If the request content to Greater Than the set * Size ESSE error is returned. Required to Increase * Content size , modify the configuration configuration/system.webServer/security/requestFiltering/requestLimits#maxAllowedContentLength .
You'll need to adjust the maximumRequestLength property within your application to handle such large files.
It's important to know that maxAllowedContentLength is measured in bytes and maximumRequestLength is measured in kilobytes when settings these values so you'll need to adjust them accordingly:
<configuration>
<system.web>
<!-- This will handle requests up to 1024MB (1GB) -->
<httpRuntime maxRequestLength="1048576" timeout="3600" />
</system.web>
</configuration>
<!-- IIS Specific Targeting (noted by the system.webServer section) -->
<system.webServer>
<security>
<requestFiltering>
<!-- This will handle requests up to 1024MB (1GB) -->
<requestLimits maxAllowedContentLength="1048576000" />
</requestFiltering>
</security>
</system.webServer>
Do you have
<configuration>
<system.web>
<httpRuntime maxRequestLength="1048576" />
</system.web>
</configuration>
in your configuration also? I think you need to also add <httpRuntime maxRequestLength="1048576" /> to yoru config file.
I got this from here - Maximum request length exceeded
After following all the guides, SO pages and troubleshooting pages I can find I'm finally out of ideas.
I've got Glimpse working fine on my local dev server, but when I deploy my ASP.net (MVC5) app to my remote server it doesn't work - at all. /glimpse.axd gives a 404 with both LocalPolicy and ControlCookiePolicy set to ignore, and with a custom security policy that returns On in all cases. My understanding is that with ControlCookiePolicy disabled, I shouldn't need to go to /glimpse.axd to enable it - but I'm not seeing the glimpse icon on the remote server either.
Even if I go to the remote server and browse localhost to /glimpse.axd I still get a 404.
My web.config looks like this:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<section name="glimpse" type="Glimpse.Core.Configuration.Section, Glimpse.Core" />
</configSections>
<system.web>
<compilation debug="false" />
<httpRuntime targetFramework="4.5.1" relaxedUrlToFileSystemMapping="true" />
</system.web>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true">
<remove name="FormsAuthentication" />
</modules>
<urlCompression doDynamicCompression="true" dynamicCompressionBeforeCache="false" />
</system.webServer>
<glimpse defaultRuntimePolicy="On" endpointBaseUri="~/Glimpse.axd">
<logging level="Trace" />
<runtimePolicies>
<ignoredTypes>
<add type="Glimpse.AspNet.Policy.LocalPolicy, Glimpse.AspNet" />
<add type="Glimpse.Core.Policy.ControlCookiePolicy, Glimpse.Core" />
</ignoredTypes>
</runtimePolicies>
</glimpse>
</configuration>
This is the version off the remote server (after transform). I've trimmed it a little to remove sections like appSettings.
My GlimpseSecurityPolicy.cs looks like this:
// Uncomment this class to provide custom runtime policy for Glimpse
using Glimpse.AspNet.Extensions;
using Glimpse.Core.Extensibility;
namespace RationalVote
{
public class GlimpseSecurityPolicy:IRuntimePolicy
{
public RuntimePolicy Execute(IRuntimePolicyContext policyContext)
{
return RuntimePolicy.On;
}
public RuntimeEvent ExecuteOn
{
// The RuntimeEvent.ExecuteResource is only needed in case you create a security policy
// Have a look at http://blog.getglimpse.com/2013/12/09/protect-glimpse-axd-with-your-custom-runtime-policy/ for more details
get { return RuntimeEvent.EndRequest | RuntimeEvent.ExecuteResource; }
}
}
}
The real one does an actual check, but I get the same issue with the policy above.
I cannot seem to find any trace output anywhere on the remote server, it is logging fine on my local machine.
I am deploying using the Visual Studio publish to web feature, and I've verified that the Glimpse.Core.dll is in the bin folder.
I can't see anything in the event log that is relevant.
I've also added <add namespace="Glimpse.Mvc.Html" /> to the namespaces block of the web.config in the views folder.
I tried putting #Html.GlimpseClient() in the _Layout.cshtml file just above </body> but this renders nothing.
Anybody got any ideas?
If the glimpse.axd is returning a 404 then this means the Glimpse resource handler is not registered.
If the web.config content you show above is not trimmed to much, then it is normal that Glimpse won't do much as the Glimpse HttpModule and the Glimpse HttpHandler are not registered in the system.web and/or the system.webserver sections like this
<system.web>
<httpModules>
<add name="Glimpse" type="Glimpse.AspNet.HttpModule, Glimpse.AspNet"/>
</httpModules>
<httpHandlers>
<add path="glimpse.axd" verb="GET" type="Glimpse.AspNet.HttpHandler, Glimpse.AspNet"/>
</httpHandlers>
</system.web>
<system.webServer>
<validation validateIntegratedModeConfiguration="false"/>
<modules>
<add name="Glimpse" type="Glimpse.AspNet.HttpModule, Glimpse.AspNet" preCondition="integratedMode"/>
</modules>
<handlers>
<add name="Glimpse" path="glimpse.axd" verb="GET" type="Glimpse.AspNet.HttpHandler, Glimpse.AspNet" preCondition="integratedMode" />
</handlers>
</system.webServer>
Maybe your transform removed to much from the local web.config?
I am getting the error Maximum request length exceeded when I am trying to upload a video in my site.
How do I fix this?
If you are using IIS for hosting your application, then the default upload file size is 4MB. To increase it, please use this below section in your web.config -
<configuration>
<system.web>
<httpRuntime maxRequestLength="1048576" />
</system.web>
</configuration>
For IIS7 and above, you also need to add the lines below:
<system.webServer>
<security>
<requestFiltering>
<requestLimits maxAllowedContentLength="1073741824" />
</requestFiltering>
</security>
</system.webServer>
Note:
maxRequestLength is measured in kilobytes
maxAllowedContentLength is measured in bytes
which is why the values differ in this config example. (Both are equivalent to 1 GB.)
I don't think it's been mentioned here, but to get this working, I had to supply both of these values in the web.config:
In system.web
<httpRuntime maxRequestLength="1048576" executionTimeout="3600" />
And in system.webServer
<security>
<requestFiltering>
<requestLimits maxAllowedContentLength="1073741824" />
</requestFiltering>
</security>
IMPORTANT : Both of these values must match. In this case, my max upload is 1024 megabytes.
maxRequestLength has 1048576 KILOBYTES, and maxAllowedContentLength has 1073741824 BYTES.
I know it's obvious, but it's easy to overlook.
It may be worth noting that you may want to limit this change to the URL you expect to be used for the upload rather then your entire site.
<location path="Documents/Upload">
<system.web>
<!-- 50MB in kilobytes, default is 4096 or 4MB-->
<httpRuntime maxRequestLength="51200" />
</system.web>
<system.webServer>
<security>
<requestFiltering>
<!-- 50MB in bytes, default is 30000000 or approx. 28.6102 Mb-->
<requestLimits maxAllowedContentLength="52428800" />
</requestFiltering>
</security>
</system.webServer>
</location>
And just in case someone's looking for a way to handle this exception and show a meaningful explanation to the user (something like "You're uploading a file that is too big"):
//Global.asax
private void Application_Error(object sender, EventArgs e)
{
var ex = Server.GetLastError();
var httpException = ex as HttpException ?? ex.InnerException as HttpException;
if(httpException == null) return;
if (((System.Web.HttpException)httpException.InnerException).WebEventCode == System.Web.Management.WebEventCodes.RuntimeErrorPostTooLarge)
{
//handle the error
Response.Write("Too big a file, dude"); //for example
}
}
(ASP.NET 4 or later required)
The maximum request size is, by default, 4MB (4096 KB)
This is explained here.
The above article also explains how to fix this issue :)
If you can't update configuration files but control the code that handles file uploads use HttpContext.Current.Request.GetBufferlessInputStream(true).
The true value for disableMaxRequestLength parameter tells the framework to ignore configured request limits.
For detailed description visit https://msdn.microsoft.com/en-us/library/hh195568(v=vs.110).aspx
There's an element in web.config to configure the max size of the uploaded file:
<httpRuntime
maxRequestLength="1048576"
/>
To summarize all the answers in a single place:
<system.web>
<httpRuntime targetFramework="4.5.2" maxRequestLength="1048576"/>
</system.web>
<system.webServer>
<security>
<requestFiltering>
<requestLimits maxAllowedContentLength="1073741824" />
</requestFiltering>
</security>
</system.webServer>
Rules:
maxRequestLength (expressed in kb) value must match
maxAllowedContentLength (expressed in bytes).
most of the time your system.web section may already contains an "httpRuntime". set your targetFramework to the version of your .net used.
Notes:
default value for maxRequestLength is 4096 (4mb). max value is 2,147,483,647
default value for maxAllowedContentLength is 30,000,000 (around 30mb). max value is 4,294,967,295
more info MSDN
maxRequestLength (length in KB) Here as ex. I took 1024 (1MB) maxAllowedContentLength (length in Bytes) should be same as your maxRequestLength (1048576 bytes = 1MB).
<system.web>
<httpRuntime maxRequestLength="1024" executionTimeout="3600" />
</system.web>
<system.webServer>
<security>
<requestFiltering>
<requestLimits maxAllowedContentLength="1048576"/>
</requestFiltering>
</security>
</system.webServer>
It bothered me for days too.
I modified the Web.config file but it didn't work.
It turned out that there are two Web.config file in my project,
and I should modified the one in the ROOT directory, not the others.
Hope this would be helpful.
If you have a request going to an application in the site, make sure you set maxRequestLength in the root web.config. The maxRequestLength in the applications's web.config appears to be ignored.
I was tripped up by the fact that our web.config file has multiple system.web sections: it worked when I added < httpRuntime maxRequestLength="1048576" /> to the system.web section that at the configuration level.
I had to edit the C:\Windows\System32\inetsrv\config\applicationHost.config file and add <requestLimits maxAllowedContentLength="1073741824" /> to the end of the...
<configuration>
<system.webServer>
<security>
<requestFiltering>
section.
As per This Microsoft Support Article
I was dealing with same error and after spending time solved it by adding below lines in web.config file
<system.web>
<httpRuntime targetFramework="4.7.1" maxRequestLength="1048576"/>
</system.web>
and
<system.webServer>
<security>
<requestFiltering>
<requestLimits maxAllowedContentLength="1073741824" />
</requestFiltering>
</security>
</system.webServer>
I can add to config web uncompiled
<system.web>
<httpRuntime maxRequestLength="1024" executionTimeout="3600" />
<compilation debug="true"/>
</system.web>
<security>
<requestFiltering>
<requestLimits maxAllowedContentLength="1048576"/>
</requestFiltering>
</security>
When manipulating Handler Mappings using the Microsoft.Web.Administration namespace, is there a way to remove the <remove name="handler name"> at the site level.
For example, I have a site which inherits all the handler mappings from the global handler mappings configuration. In applicationHost.config the <location> tag initially looks like this:
<location path="60030 - testsite-60030.com">
<system.webServer>
<security>
<authentication>
<anonymousAuthentication userName="" />
</authentication>
</security>
</system.webServer>
</location>
To remove a handler I use code similar this:
string siteName = "60030 - testsite-60030.com";
string handlerToRemove = "ASPClassic";
using(ServerManager sm = new ServerManager())
{
Configuration siteConfig =
serverManager.GetApplicationHostConfiguration();
ConfigurationSection handlersSection =
siteConfig.GetSection("system.webServer/handlers", siteName);
ConfigurationElementCollection handlersCollection =
handlersSection.GetCollection();
ConfigurationElement handlerElement = handlersCollection
.Where(h => h["name"].Equals(handlerMapping.Name)).Single();
handlersCollection.Remove(handlerElement);
}
This results in the site's <location> tag looking like:
<location path="60030 - testsite-60030.com">
<system.webServer>
<security>
<authentication>
<anonymousAuthentication userName="" />
</authentication>
</security>
<handlers>
<remove name="ASPClassic" />
</handlers>
</system.webServer>
</location>
So far so good. However if I re-add the ASPClassic handler this results in:
<location path="60030 - testsite-60030.com">
<system.webServer>
<security>
<authentication>
<anonymousAuthentication userName="" />
</authentication>
</security>
<handlers>
<remove name="ASPClassic" />
<add name="ASPClassic" path="*.asp" verb="GET,HEAD,POST" modules="IsapiModule" scriptProcessor="%windir%\system32\inetsrv\asp.dll" resourceType="File" />
</handlers>
</system.webServer>
</location>
This can result in a lot of cruft over time for each website that's had a handler removed then re-added programmatically. Is there a way to just remove the <remove name="ASPClassic" /> using the Microsoft.Web.Administration namespace code?
I have discussed this with the IIS product team and this appears to be a bug with the configuration system. What is more interesting is that when I attempt this code on Win7 with IIS 7.5, I cannot even re-add the handler programmatically. Attempting to do so results in a COM exception that states:
"Error: Cannot add duplicate collection entry of type 'add' with unique key attribute 'name' set to 'ASPClassic'"
That becomes even more problematic because once a user has "removed" a handler for a location, it cannot be re-added through the M.W.A. API until this bug is fixed.