I am bit confused writing the regex for finding the Text between the two delimiters { } and replace the text with another text in c#,how to replace?
I tried this.
StreamReader sr = new StreamReader(#"C:abc.txt");
string line;
line = sr.ReadLine();
while (line != null)
{
if (line.StartsWith("<"))
{
if (line.IndexOf('{') == 29)
{
string s = line;
int start = s.IndexOf("{");
int end = s.IndexOf("}");
string result = s.Substring(start+1, end - start - 1);
}
}
//write the lie to console window
Console.Write Line(line);
//Read the next line
line = sr.ReadLine();
}
//close the file
sr.Close();
Console.ReadLine();
I want replace the found text(result) with another text.
Use Regex with pattern: \{([^\}]+)\}
Regex yourRegex = new Regex(#"\{([^\}]+)\}");
string result = yourRegex.Replace(yourString, "anyReplacement");
string s = "data{value here} data";
int start = s.IndexOf("{");
int end = s.IndexOf("}", start);
string result = s.Substring(start+1, end - start - 1);
s = s.Replace(result, "your replacement value");
To get the string between the parentheses to be replaced, use the Regex pattern
string errString = "This {match here} uses 3 other {match here} to {match here} the {match here}ation";
string toReplace = Regex.Match(errString, #"\{([^\}]+)\}").Groups[1].Value;
Console.WriteLine(toReplace); // prints 'match here'
To then replace the text found you can simply use the Replace method as follows:
string correctString = errString.Replace(toReplace, "document");
Explanation of the Regex pattern:
\{ # Escaped curly parentheses, means "starts with a '{' character"
( # Parentheses in a regex mean "put (capture) the stuff
# in between into the Groups array"
[^}] # Any character that is not a '}' character
* # Zero or more occurrences of the aforementioned "non '}' char"
) # Close the capturing group
\} # "Ends with a '}' character"
The following regular expression will match the criteria you specified:
string pattern = #"^(\<.{27})(\{[^}]*\})(.*)";
The following would perform a replace:
string result = Regex.Replace(input, pattern, "$1 REPLACE $3");
For the input: "<012345678901234567890123456{sdfsdfsdf}sadfsdf" this gives the output "<012345678901234567890123456 REPLACE sadfsdf"
You need two calls to Substring(), rather than one: One to get textBefore, the other to get textAfter, and then you concatenate those with your replacement.
int start = s.IndexOf("{");
int end = s.IndexOf("}");
//I skip the check that end is valid too avoid clutter
string textBefore = s.Substring(0, start);
string textAfter = s.Substring(end+1);
string replacedText = textBefore + newText + textAfter;
If you want to keep the braces, you need a small adjustment:
int start = s.IndexOf("{");
int end = s.IndexOf("}");
string textBefore = s.Substring(0, start-1);
string textAfter = s.Substring(end);
string replacedText = textBefore + newText + textAfter;
the simplest way is to use split method if you want to avoid any regex .. this is an aproach :
string s = "sometext {getthis}";
string result= s.Split(new char[] { '{', '}' })[1];
You can use the Regex expression that some others have already posted, or you can use a more advanced Regex that uses balancing groups to make sure the opening { is balanced by a closing }.
That expression is then (?<BRACE>\{)([^\}]*)(?<-BRACE>\})
You can test this expression online at RegexHero.
You simply match your input string with this Regex pattern, then use the replace methods of Regex, for instance:
var result = Regex.Replace(input, "(?<BRACE>\{)([^\}]*)(?<-BRACE>\})", textToReplaceWith);
For more C# Regex Replace examples, see http://www.dotnetperls.com/regex-replace.
Related
I have this string (it's from EDI data):
ISA*ESA?ISA*ESA?
The * indicates it could be any character and can be of any length.
? indicates any single character.
Only the ISA and ESA are guaranteed not to change.
I need this split into two strings which could look like this: "ISA~this is date~ESA|" and
"ISA~this is more data~ESA|"
How do I do this in c#?
I can't use string.split, because it doesn't really have a delimeter.
You can use Regex.Split for accomplishing this
string splitStr = "|", inputStr = "ISA~this is date~ESA|ISA~this is more data~ESA|";
var regex = new Regex($#"(?<=ESA){Regex.Escape(splitStr)}(?=ISA)", RegexOptions.Compiled);
var items = regex.Split(inputStr);
foreach (var item in items) {
Console.WriteLine(item);
}
Output:
ISA~this is date~ESA
ISA~this is more data~ESA|
Note that if your string between the ISA and ESA have the same pattern that we are looking for, then you will have to find some smart way around it.
To explain the Regex a bit:
(?<=ESA) Look-behind assertion. This portion is not captured but still matched
(?=ISA) Look-ahead assertion. This portion is not captured but still matched
Using these look-around assertions you can find the correct | character for splitting
Simply use the
int x = whateverString.indexOf("?ISA"); // replace ? with the actual character here
and then just use the substring from 0 to that indexOf, indexOf to length.
Edit:
If ? is not known,
can we just use the regex Pattern and Matcher.
Matcher matcher = Patter.compile("ISA.*ESA").match(whateverString);
if(matcher.find()) {
matcher.find();
int x = matcher.start();
}
Here x would give that start index of that match.
Edit: I mistakenly saw it as java one, for C#
string pattern = #"ISA.*ESA";
Regex myRegex = new Regex(pattern, RegexOptions.IgnoreCase);
Match m = myRegex.Match(whateverString); // m is the first match
while (m.Success)
{
Console.writeLine(m.value);
m = m.NextMatch(); // more matches
}
RegEx will probably be the best for this. See this link
Mask would be
ISA(?<data1>.*?)ESA.ISA(?<data2>.*?)ESA.
This will give you 2 groups with data you need
Match match = Regex.Match(input, #"ISA(?<data1>.*?)ESA.ISA(?<data2>.*?)ESA.",RegexOptions.IgnoreCase);
if (match.Success)
{
var data1 = match.Groups["data1"].Value;
var data2 = match.Groups["data2"].Value;
}
Use Regex.Matches If you need multiple matches found, and specify different RegexOptions if needed.
It's kinda hacky but you could do...
string x = "ISA*ESA?ISA*ESA?";
x = x.Replace("*","~"); // OR SOME OTHER DELIMITER
string[] y = x.Split('~');
Not perfect in all situations, but it could solve your problem simply.
You could split by "ISA" and "ESA" and then put the parts back together.
string input = "ISA~this is date~ESA|ISA~this is more data~ESA|";
string start = "ISA",
end = "ESA";
var splitedInput = input.Split(new[] { start, end }, StringSplitOptions.None);
var firstPart = $"{start}{splitedInput[1]}{end}{splitedInput[2]}";
var secondPart = $"{start}{splitedInput[3]}{end}{splitedInput[4]}";
firstPart = "ISA~this is date~ESA|"
secondPart = "ISA~this is more data~ESA|";
Use a Regex like ISA(.+?)ESA and select the first group
string input = "ISA~mycontent+ESA";
Match match = Regex.Match(input, #"ISA(.+?)ESA",RegexOptions.IgnoreCase);
if (match.Success)
{
string key = match.Groups[1].Value;
}
Instead of "splitting" by a string, I would instead describe your question as "grouping" by a string. This can easily be done using a regular expression:
Regular expression: ^(ISA.*?(?=ESA)ESA.)(ISA.*?(?=ESA)ESA.)$
Explanation:
^ - asserts position at start of the string
( - start capturing group
ISA - match string ISA exactly
.*?(?=ESA) - match any character 0 or more times, positive lookahead on the
string ESA (basically match any character until the string ESA is found)
ESA - match string ESA exactly
. - match any character
) - end capturing group
repeat one more time...
$ - asserts position at end of the string
Try it on Regex101
Example:
string input = "ISA~this is date~ESA|ISA~this is more data~ESA|";
Regex regex = new Regex(#"^(ISA.*?(?=ESA)ESA.)(ISA.*?(?=ESA)ESA.)$",
RegexOptions.Compiled);
Match match = regex.Match(input);
if (match.Success)
{
string firstValue = match.Groups[1].Value; // "ISA~this is date~ESA|"
string secondValue = match.Groups[2].Value; // "ISA~this is more data~ESA|"
}
There are two answers to the question "How to split a string by another string".
var matches = input.Split(new [] { "ISA" }, StringSplitOptions.RemoveEmptyEntries);
and
var matches = Regex.Split(input, "ISA").ToList();
However, the first removes empty entries, while the second does not.
Consider the following string
string path = #"\\ParentDirectory\All_Attachments$\BATCH_NUMBERS\TS0001\SubDirectory\FileName.txt";
I am trying to modify the path by removing the \\ParentDirectory\All_Attachments$\. So I want my final string to look like:
BATCH_NUMBERS\TS0001\SubDirectory\FileName.txt
I have come up with the following regex
string pattern = #"(?<=\$)(\\)";
string returnValue = Regex.Replace(path, pattern, "", RegexOptions.IgnoreCase);
With the above if I do Console.WriteLine(returnValue) I get
\\ParentDirectory\All_Attachments$BATCH_NUMBERS\TS0001\SubDirectory\FileName.txt
So it only removes \ can someone tell me how to achieve this please.
The code below should do the trick.
string path = #"\\ParentDirectory\All_Attachments$\BATCH_NUMBERS\TS0001\SubDirectory\FileName.txt";
var result = Regex.Replace(path,
#"^ # Start of string
[^$]+ # Anything that is not '$' at least one time
\$ # The '$ sign
\\ # The \ after the '$'
", String.Empty, RegexOptions.IgnorePatternWhitespace);
When executed in LinqPad it gives the following result:
BATCH_NUMBERS\TS0001\SubDirectory\FileName.txt
As an alternative avoiding an RE or split/join you could just run along the string until you have seen 4 slashes:
string result = null;
for (int i = 0, m = 0; i < path.Length; i++)
if (path[i] == '\\' && ++m == 4) {
result = path.Substring(i + 1);
break;
}
Using a regex that takes the first 2 groups of (backslash(es) followed by 1 or more non-backslashes). And including the $ and backslash after that.
string returnValue = Regex.Replace(path, #"^(?:\\+[^\\]+){2}\$\\", "");
Or by splitting on $, joining the string array without it's first element and then trim \ from the start:
string returnValue = string.Join(null, path.Split('$').Skip(1)).TrimStart('\\');
But you'll be using System.Linq for that method to work.
You can use a combination of Substring() and IndexOf() to accomplish your goal:
string result = path.Substring(path.IndexOf("$") + 1);
I have a string which will have the word "TAG" followed by an integer,underscore and another word.
Eg: "TAG123_Sample"
I need to cut the "TAGXXX_" pattern and get only the word Sample. Meaning I will have to cut the word "TAG" and the integer followed by and the underscore.
I wrote the following code but it doesn't work. What have I done wrong? How can I do this? Please advice.
static void Main(string[] args)
{
String sentence = "TAG123_Sample";
String pattern=#"TAG[^\d]_";
String replacement = "";
Regex r = new Regex(pattern);
String res = r.Replace(sentence,replacement);
Console.WriteLine(res);
Console.ReadLine();
}
You're currently negating (matching NOT a digit), you need to modify the regex as follows:
String s = "TAG123_Sample";
String r = Regex.Replace(s, #"TAG\d+_", "");
Console.WriteLine(r); //=> "Sample"
Explanation:
TAG match 'TAG'
\d+ digits (0-9) (1 or more times)
_ '_'
You can use String.Split for this:
string[] s = "TAG123_Sample".Split('_');
Console.WriteLine(s[1]);
https://msdn.microsoft.com/en-us/library/b873y76a.aspx
Try this will work in this case for sure:
resultString = Regex.Replace(sentence ,
#"^ # Match start of string
[^_]* # Match 0 or more characters except underscore
_ # Match the underscore", "", RegexOptions.IgnorePatternWhitespace);
No regex is necessary if your string contains 1 underscore and you need to get a substring after it.
Here is a Substring+IndexOf-based approach:
var res = sentence.Substring(sentence.IndexOf('_') + 1); // => Sample
See IDEONE demo
I have string in my c# code
a,b,c,d,"e,f",g,h
I want to replace "e,f" with "e f" i.e. ',' which is inside inverted comma should be replaced by space.
I tried using string.split but it is not working for me.
OK, I can't be bothered to think of a regex approach so I am going to offer an old fashioned loop approach which will work:
string DoReplace(string input)
{
bool isInner = false;//flag to detect if we are in the inner string or not
string result = "";//result to return
foreach(char c in input)//loop each character in the input string
{
if(isInner && c == ',')//if we are in an inner string and it is a comma, append space
result += " ";
else//otherwise append the character
result += c;
if(c == '"')//if we have hit an inner quote, toggle the flag
isInner = !isInner;
}
return result;
}
NOTE: This solution assumes that there can only be one level of inner quotes, for example you cannot have "a,b,c,"d,e,"f,g",h",i,j" - because that's just plain madness!
For the scenario where you only need to match one pair of letters, the following regex will work:
string source = "a,b,c,d,\"e,f\",g,h";
string pattern = "\"([\\w]),([\\w])\"";
string replace = "\"$1 $2\"";
string result = Regex.Replace(source, pattern, replace);
Console.WriteLine(result); // a,b,c,d,"e f",g,h
Breaking apart the pattern, it is matching any instance where there is a "X,X" sequence where X is any letter, and is replacing it with the very same sequence, with a space in between the letters instead of a comma.
You could easily extend this if you needed to to have it match more than one letter, etc, as needed.
For the case where you can have multiple letters separated by commas within quotes that need to be replaced, the following can do it for you. Sample text is a,b,c,d,"e,f,a",g,h:
string source = "a,b,c,d,\"e,f,a\",g,h";
string pattern = "\"([ ,\\w]+),([ ,\\w]+)\"";
string replace = "\"$1 $2\"";
string result = source;
while (Regex.IsMatch(result, pattern)) {
result = Regex.Replace(result, pattern, replace);
}
Console.WriteLine(result); // a,b,c,d,"e f a",g,h
This does something similar compared to the first one, but just removes any comma that is sandwiched by letters surrounded by quotes, and repeats it until all cases are removed.
Here's a somewhat fragile but simple solution:
string.Join("\"", line.Split('"').Select((s, i) => i % 2 == 0 ? s : s.Replace(",", " ")))
It's fragile because it doesn't handle flavors of CSV that escape double-quotes inside double-quotes.
Use the following code:
string str = "a,b,c,d,\"e,f\",g,h";
string[] str2 = str.Split('\"');
var str3 = str2.Select(p => ((p.StartsWith(",") || p.EndsWith(",")) ? p : p.Replace(',', ' '))).ToList();
str = string.Join("", str3);
Use Split() and Join():
string input = "a,b,c,d,\"e,f\",g,h";
string[] pieces = input.Split('"');
for ( int i = 1; i < pieces.Length; i += 2 )
{
pieces[i] = string.Join(" ", pieces[i].Split(','));
}
string output = string.Join("\"", pieces);
Console.WriteLine(output);
// output: a,b,c,d,"e f",g,h
I have the following string:
This isMyTest testing
I want to get isMyTest as a result. I only have two first characters available("is"). The rest of the word can vary.
Basically, I need to select a first word delimeted by spaces which starts with chk.
I've started with the following:
if (text.contains(" is"))
{
text.LastIndexOf(" is"); //Should give me index.
}
now I cannot find the right bound of the word since I need to match on something like
You can use regular expressions:
string pattern = #"\bis";
string input = "This isMyTest testing";
return Regex.Matches(input, pattern);
You can use IndexOf to get the index of the next space:
int startPosition = text.LastIndexOf(" is");
if (startPosition != -1)
{
int endPosition = text.IndexOf(' ', startPosition + 1); // Find next space
if (endPosition == -1)
endPosition = text.Length - 1; // Select end if this is the last word?
}
What about using a regex match? Generally if you are searching for a pattern in a string (ie starting with a space followed by some other character) regex are perfectly suited to this. Regex statements really only fall apart in contextually sensitive areas (such as HTML) but are perfect for a regular string search.
// First we see the input string.
string input = "/content/alternate-1.aspx";
// Here we call Regex.Match.
Match match = Regex.Match(input, #"[ ]is[A-z0-9]*", RegexOptions.IgnoreCase);
// Here we check the Match instance.
if (match.Success)
{
// Finally, we get the Group value and display it.
string key = match.Groups[1].Value;
Console.WriteLine(key);
}