What is the main reason of this error
No individual rows in this collection can be addressed because the
table contains vertically linked cells. '
I have table in which I want to add data (stored in array) but second row of the table is merged and I got this error message.
What can be appropriate solution to remove this error.
Code :
if (pCell.Range.Text.Contains("List of components robots"))
{
iDT16 = 0; rowcount = 0;
foreach (int Row in wordDocument.Tables[j].ToString()) // Add row in the table according to data available inside Result array
{
while (sDesignation_Componentsrobots[iDT16] != null)
{
wordDocument.Tables[j].Rows.Add();
wordDocument.Tables[j].Rows.SetHeight(28, Word.WdRowHeightRule.wdRowHeightAtLeast);
rowcount = wordDocument.Tables[j].Rows.Count;
iDT16++;
}
}
// Fill the row with data and add checkbox in particular table column.
iDT16 = 0; iEST16 = 0;
for (int row = 3; row <= rowcount; row++)
{
wTable.AllowAutoFit = true;
wTable.Rows[row].Range.Font.Bold = 0;
wTable.Rows[row].Range.ParagraphFormat.Alignment = Word.WdParagraphAlignment.wdAlignParagraphCenter;
wTable.Rows[row].Range.ParagraphFormat.SpaceBefore = 5;
wTable.Cell(row, 1).Range.Text = sDesignation_Componentsrobots[iDT16];
wTable.Cell(row, 3).Range.Text = sEmergency_stopcircuit_T16[iEST16];
Word.FormField checkBox2 = wTable.Cell(row, 6).Range.FormFields.Add(wTable.Cell(row, 6).Range, Word.WdFieldType.wdFieldFormCheckBox);
iDT16++; iEST16++;
}
break;
}
Table with merged row:
I have two columns in a excel sheet. I am populating the first column with a formula and I have some values in second column. Now I want to compare these two columns and need to display True/false in third column. But when I use 'IF' condition all I am getting is FALSE. Here is my code.
Formulating the column
using (ExcelPackage xlPackage = new ExcelPackage(newFile))
{
ExcelWorksheet worksheet = xlPackage.Workbook.Worksheets[GetConfigValue("Reconsheet")];
int totalRows = worksheet.Dimension.End.Row;
for (int row = startupRow; row <= totalRows; row++)
{
//Formula
string vlookforH = "IF(ISNA(VLOOKUP(C" + row + ",PWA!A:B,2,FALSE)),0,VLOOKUP(C" + row + ",PWA!A:B,2,FALSE))";
worksheet.Cells[row, 8].Formula = vlookforH;
}
xlPackage.Save();
MessageBox.Show("PWA hours received");
}
Comparing Formula column and Normal value column:
for (int row = startupRow; row <= totalRows; row++)
{
if (Convert.ToInt32(worksheet.Cells[row, 18].Value) != 0)
{
decimal hvalue = (worksheet.Cells[row, 8].Value) != null ? Convert.ToDecimal(worksheet.Cells[row, 8].Value.ToString()) : 0;
decimal rvalue = (worksheet.Cells[row, 18].Value) != null ? Convert.ToDecimal(worksheet.Cells[row, 18].Value.ToString()) : 0;
if (hvalue == rvalue)
{
worksheet.Cells[row, 31].Value = "True";
}
else
{
worksheet.Cells[row,31].Value = "False";
Count = Count + 1;
}
}
}
When I am debugging the application, I realized hvalue is always zero because it's a formula column.
I've tried in different ways, but unable to find the solution. Can anyone help me? What am I doing wrong?
You will have to call worksheet.Calculate(); after writing the formulas into the cells to actually calculate the values. Calling it once after your first for-loop is enough.
I verified that on a test-project.
EDIT:
If worksheet.Calculate() does not work you can try xlPackage.Workbook.Calculate();
Here is a link to the documentation: EPPlus Calculate Documentation
I want to select column from data grid view.
Then, I want to add data in cells number 5 for the selected column.
Below code is not worked.
for (int i = 0; i < dgvSRP.Rows.Count; ++i)
{
dgvSRP.Rows.Add();
DataGridViewRow row = this.dgvSRP.Rows[i];
row.Cells[5].Value =txtJumlahPEsanan.Text;
}
foreach(var dgvRow in dgvSRP.Rows)
{
dgvRow.Cells[4].Value = txtJumlahPEsanan.Text; // The 5th column is index 4. Indexes always start at 0.
}
Here is my code i have select specific column value and assign it to textbox. May this solve your problem. Remember i have two cells rows thats why i kept cell[1] because index start from 0.
for (int i = 0; i < dataGridView1.Rows.Count; i++)
{
if (i == 5)
{
textBox3.Text = dataGridView1.Rows[i].Cells[1].Value.ToString();
}
}
I want (as title states) to programmatically read values from an Excel file. Row by row and then cell by cell, to have the freedom of creating custom collections out of cell's data.
This questions helped me.
But I need more flexible code. Can I for example write (* is just for all columns)
Range range1 = worksheet.get_Range("*1", Missing.Value)
foreach (Range r in range1)
{
string user = r.Text;
string value = r.Value2;
}
And iterate all cells in row 1 as long as there is next.
There must be some elegant way to iterate through rows and cells in C#.
You can rely on the Rows/Columns properties and then iterate through all the contained ranges (Cells). Sample code:
Range range1 = worksheet.Rows[1]; //For all columns in row 1
//Range range1 = worksheet.Columns[1]; //for all rows in column 1
foreach (Range r in range1.Cells) //range1.Cells represents all the columns/rows
{
// r is the range of the corresponding cell
}
Try this:
Excel.Range r = worksheet.get_Range("*1", Missing.Value);
for (int j = 0; j < r.Rows.Count; j++) {
Excel.Range currentCell = r.Rows[j + 1] as Excel.Range;
}
I have user supplied excel files that need to be converted to PDF. Using excel interop, I can do this fine with .ExportAsFixedFormat(). My problem comes up when a workbook has millions of rows. This turns into a file that has 50k+ pages. That would be fine if the workbook had content in all of those rows. Every time one of these files shows up though, there are maybe 50 rows that have content and the rest are blank. How can I go about removing the empty rows so I can export it to a decent sized PDF?
I've tried starting at the end row and, one-by-one, using CountA to check if the row has content and if it does, delete it. Not only does this take forever, this seems to fail after about 100k rows with the following error:
Unable to evaluate expression because the code is optimized or a native frame is on top of the call stack.
I've tried using SpecialCells(XlCellType.xlCellTypeLastCell, XlSpecialCellsValue.xlTextValues) but that includes a row if any cell has formatting (like a bg color).
I've tried using Worksheet.UsedRange and then deleting everything after that but UsedRange has the same problem as point two.
This is the code I've tried:
for (int i = 0; i < worksheets.Count; i++)
{
sheet = worksheets[i + 1];
rows = sheet.Rows;
currentRowIndex = rows.Count;
bool contentFound = false;
while (!contentFound && currentRowIndex > 0)
{
currentRow = rows[currentRowIndex];
if (Application.WorksheetFunction.CountA(currentRow) == 0)
{
currentRow.Delete();
}
else
{
contentFound = true;
}
Marshal.FinalReleaseComObject(currentRow);
currentRowIndex--;
}
Marshal.FinalReleaseComObject(rows);
Marshal.FinalReleaseComObject(sheet);
}
for (int i = 0; i < worksheets.Count; i++)
{
sheet = worksheets[i + 1];
rows = sheet.Rows;
lastCell = rows.SpecialCells(XlCellType.xlCellTypeLastCell, XlSpecialCellsValue.xlTextValues);
int startRow = lastCell.Row;
Range range = sheet.get_Range(lastCell.get_Address(RowAbsolute: startRow));
range.Delete();
Marshal.FinalReleaseComObject(range);
Marshal.FinalReleaseComObject(lastCell);
Marshal.FinalReleaseComObject(rows);
Marshal.FinalReleaseComObject(sheet);
}
Do I have a problem with my code, is this an interop problem or maybe it's just a limitation on what Excel can do? Is there a better way to do what I'm attempting?
I would suggest you to get the count of rows which contain some values, using CountA (as you have tried in point 1). Then copy those rows into a new sheet and export it from there. It will be easier to copy few rows to new sheet and working on it, rather than trying to delete huge number of rows from source sheet.
For creating new sheet and copying rows you can use the following code:
excel.Worksheet tempSheet = workbook.Worksheets.Add();
tempSheet.Name = sheetName;
workbook.Save();
//create a new method for copy new rows
//as the rowindex you can pass the total no of rows you have found out using CountA
public void CopyRows(excel.Workbook workbook, string sourceSheetName, string DestSheetName, int rowIndex)
{
excel.Worksheet sourceSheet = (excel.Worksheet)workbook.Sheets[sourceSheetName];
excel.Range source = (excel.Range)sourceSheet.Range["A" + rowIndex.ToString(), Type.Missing].EntireRow;
excel.Worksheet destSheet = (excel.Worksheet)workbook.Sheets[DestSheetName];
excel.Range dest = (excel.Range)destSheet.Range["A" + rowIndex.ToString(), Type.Missing].EntireRow;
source.Copy(dest);
excel.Range newRow = (excel.Range)destSheet.Rows[rowIndex+1];
newRow.Insert();
workbook.Save();
}
Have you tried Sheet1.Range("A1").CurrentRegion.ExportAsFixedFormat() where Sheet1 is a valid sheet name and "A1" is a cell you can test to ensure it is located in the range you want to export?
The question remains, why does Excel think there is data in those "empty" cells? Formatting? A pre-existing print area that needs to be cleared? I know I've encountered situations like that before, those are the only possibilities that come to mind at this moment.
Try these steps -
copy Worksheet.UsedRange to a separate sheet (sheet2).
use paste special so that formatting is retained
try parsing sheet2 for unused rows
If this doesnt help try repeating step 2 with formatting info being cleared and then parsing sheet2. you can always copy format info later (if they are simple enough)
If you can first load the Excel file into a DataSet via the OleDBAdapter, it's relatively easy to remove blank rows on the import...
Try this OleDBAdapter Excel QA I posted via stack overflow.
Then export the DataSet to a new Excel file and convert that file to PDF. That may be a big "IF" though of course depending on the excel layout (or lack there of).
I had to solve this problem today for what might be a subset of your possible cases.
If your spreadsheet meets the following conditions:
All columns with data have header text in line 1.
All rows with data are in sequence until the first BLANK row.
Then, the following code may help:
private static string[,] LoadCellData(Excel.Application excel, dynamic sheet)
{
int countCols = CountColsToFirstBlank(excel, sheet);
int countRows = CountRowsToFirstBlank(excel, sheet);
cellData = new string[countCols, countRows];
string datum;
for (int i = 0; i < countCols; i++)
{
for (int j = 0; j < countRows; j++)
{
try
{
if (null != sheet.Cells[i + 1, j + 1].Value)
{
datum = excel.Cells[i + 1, j + 1].Value.ToString();
cellData[i, j] = datum;
}
}
catch (Exception ex)
{
lastException = ex;
//Console.WriteLine(String.Format("LoadCellData [{1}, {2}] reported an error: [{0}]", ex.Message, i, j));
}
}
}
return cellData;
}
private static int CountRowsToFirstBlank(Excel.Application excel, dynamic sheet)
{
int count = 0;
for (int j = 0; j < sheet.UsedRange.Rows.Count; j++)
{
if (IsBlankRow(excel, sheet, j + 1))
break;
count++;
}
return count;
}
private static int CountColsToFirstBlank(Excel.Application excel, dynamic sheet)
{
int count = 0;
for (int i = 0; i < sheet.UsedRange.Columns.Count; i++)
{
if (IsBlankCol(excel, sheet, i + 1))
break;
count++;
}
return count;
}
private static bool IsBlankCol(Excel.Application excel, dynamic sheet, int col)
{
for (int i = 0; i < sheet.UsedRange.Rows.Count; i++)
{
if (null != sheet.Cells[i + 1, col].Value)
{
return false;
}
}
return true;
}
private static bool IsBlankRow(Excel.Application excel, dynamic sheet, int row)
{
for (int i = 0; i < sheet.UsedRange.Columns.Count; i++)
{
if (null != sheet.Cells[i + 1, row].Value)
{
return false;
}
}
return true;
}
Can you try with below code :
for (int rowIndex = workSheet.Dimension.Start.Row; rowIndex <= workSheet.Dimension.End.Row; rowIndex++)
{
//Assume the first row is the header. Then use the column match ups by name to determine the index.
//This will allow you to have the order of the header.Keys change without any affect.
var row = workSheet.Cells[string.Format("{0}:{0}", rowIndex)];
// check if the row and column cells are empty
bool allEmpty = row.All(c => string.IsNullOrWhiteSpace(c.Text));
if (allEmpty)
continue; // skip this row
else{
//here read header
if()
{
//some code
}
else
{
//some code to read body
}
}
}
Hope this help,else let me know if you need description about code.
Updated :
below code is used to check how many rows are in the worksheet. a for loop will traverse untill end of row of the worksheet.
for (int rowIndex = workSheet.Dimension.Start.Row; rowIndex <= workSheet.Dimension.End.Row; rowIndex++)
here we are checking if the row and column cells are empty using linq:
bool allEmpty = row.All(c => string.IsNullOrWhiteSpace(c.Text));
if (allEmpty)
continue; // if true then skip this row
else
// read headers(assuming it is presented in worksheet)
// else read row wise data
and then do necessary steps.
hoping this clears now.
I had the same problem and managed to fix it using the CurrentRegion:
var lastcell = sheet.Cells.SpecialCells(XlCellType.xlCellTypeLastCell);
var filledcells = sheet.Cells.Range[sheet.Cells.Item[1, 1],
sheet.Cells[lastcell.Row - 1, lastcell.Column]]
.CurrentRegion;
filledcells.ExportAsFixedFormat(
and so on. The CurrentRegion is said to expand to the borders where cells are empty, and apparently that means it also shrinks if it contains many empty cells.
Please try the following code:
for (int i = 0; i < worksheets.Count; i++)
{
sheet = worksheets[i + 1];
sheet.Columns("A:A").SpecialCells(XlCellType.xlCellTypeBlanks).EntireRow.Delete
sheet.Rows("1:1").SpecialCells(XlCellType.xlCellTypeBlanks).EntireColumn.Delete
Marshal.FinalReleaseComObject(sheet);
}