I have a C# WinForms application I am developing with Visual Studio 2010. My application has a custom control (User Control). When I am designing the custom control here is what it looks like:
Note the very narrow space between the image, label, and combo box.
When I add the custom control to my main form here is what it looks like:
Notice how much more space there is between the controls as compared to the spacing in the first image.
I have no idea where this extra spacing is coming from. It's as if the margin/padding between the controls is getting multiplied by some scale factor of which I have no idea how it's determined.
I have tried changing the padding/margins on both the custom control and the main form but nothing seems to work.
Does anyone know why this extra space shows up?
Thank you.
I can see only two reasons for such behavior - either you have wrong Dock / Anchor settings (issue is reproduced when you have Dock set to None and Anchor to Top only), or your image, label and combobox are sitting in cells of some other control, like TableLayoutPanel which adjusts width of cells. Thus you don't have any additional container, then check very carefully Dock and Anchor settings of each of the controls (image, label and combobox). Also check if you change these properties at runtime (also check Margin, Location and Padding).
Related
I've tried looking many places for an answer to an issue I'm having and so far I've found nothing.
What I currently have is a c# windows form with user controls inside it. Some user controls have other controls inside them. What happens when I change the text in a textbox, is its parent windows will no longer resize like they should when changing the window size. i.e. A horizontal scrollbar will appear even though horizontal scrollbars are disabled in that specific window. Its almost as if changing the text changes the parent window's styling.
In case this is too vague, I have a textbox inside a panel with a docking property set to fill. The panel has a padding of 10 in order to allow the textbox to have some white space for aesthetic purposes. This control resides within a parent control (we'll call it parent 1), which in turn resides within another control as well (we'll call it parent 2). So when I change the textbox's text (at all, even adding a space), will then make parent 2 have a horizontal scrollbar flicker and sometimes even remain when resizing the form window manually.
You should make sure that not only the TextBox in the UserControl is docked to fill but also that the user control itself and its parent (and its parent) are Docked correctly or have anchor set so that they resize with the Form.
Do you execute any special code when the user enters a character? (KeyPressed event etc.). If yes you should try disabling the events temporarily to see if they cause the problem.
If you post a sample of your code it would be easier to help. Without this we can only guess, like I tried...
I found out my issue! When using autoScrollBars and double buffering, it caused the horizontal scrollbar to show when it shouldn't have (at least in my case) when resizing the window. The answer was simple, forget the autoScrollBars, and implement my own vertical scroll bar!
I was actually getting some code to post up on here for you guys to look at, but when looking at it, I decided to forget the autoscroll, and lo and behold it worked!
I'm actually curious as to why that is though. My friend heard that .net has some issues with autoScroll but I didn't think it would be to this degree.
Kinda new in Microsoft visual C#. I have made a simple program. Everything is working perfectly fine, unfortunately the tricky part for me is i do not know how to layout my objects properly. I would like to copy the layout of the Microsoft visual C# interface, wherein the panels adjust to their predefined ratio and proportion whenever the main form is re-sized and the user may adjust the width and height of each panel. Any readings or code would be a lot of Help. THANKS A LOT!
You could do a number of things:
Allow automatic layout using something like a FlowLayoutPanel
Allow resizing of controls using a Splitter
Look at custom implementations to provide more advanced functionality Collapsible Splitter
Well follow these tutorial links to know about resizing in windows
using Dock and Anchor property. Along this the layout control will
help you to manage the layout - FlowLayoutPanel and
TableLayoutPanel, Panel, GroupBox etc.
Designing Resizable Windows Forms in Visual Studio .NET
Manage WinForm controls using the Anchor and Dock properties
This one is much better to understand.
For a simple start the anchor property is what you want. so for instance if you set all four anchors for that left hand control, and the parent window changes size it will will resize proportionally.
After that it starts getting complicated. Adding panels and then putting your controls inside them. Setting Dock to left, or top or fill. Grow and shink on scrollable controls. Splitter bars.
And last ditch handling resize events and calculating positions and sizes.
Sit down and have a think about what you want to happen, play around with minimum and maximum height and widths, ie no point in working out waht your form is going to look like when it's postage stamp sized...
PS Don't forget VS allows floating panels, and persists (well some times sort of) user choices in the layout, that's a bigger job.
Place a TableLayoutPanel as the base control, anchor it to all sides, define as many columns and rows as you like with "percentage" sizes.
Then place different sections of your form in different table cells. Properly dock your controls in each cell.
Can also use a split container above table if needed.
The ideal order should be like below
SplitContainer
TableLayoutPanel
Panel
Controls
A disclaimer first! This might be a very fundamental question, but I have started learning Winforms Application Development on my own (.net 3.5,C#), and I have this resizing question.
I am developing a small Winforms application that has a standard tab control (along with many other controls) placed in the form. (It has 5 TabPages)
The AutoScroll property for the TabPage has been set to “True”. On reading up what I got to understand is that this will enable the scrollbars to show up at run time while resizing. i.e if the height of the form is reduced it will cause the vertical scrollbar to show up within the TabPage.
While the application is running, what I noticed is that if I reduce the height of the form using the little double headed arrow, the scroll bar does not stay on top, i.e if I adjust the height from below, the bottom end of the scrollbar is no longer there. More precisely I am just looking for a way to keep both ends of the scrollbar on top within a TabPage when the form containing the Tab control is resized.
It sounds like the problem is that the tabbed control will show scrollbars and may well autosize, but you haven't told the form what to do.
You might want to look at the 'Dock' property of controls, which causes a control to fill a specific area of the form (or other parent control), no matter what it is resized to.
I have a panel that has lots of labels and checkboxes. I want to grab all these controls and resize them?
How would I do this? Would this be like going through the panel for all the controls then resizing them?
Or do you think it would be better to re render the whole form again with the new sizes. However this would require me to do another request to the webservice to get the information.
I need to resize the controls because I want allow user to switch from portrait mode to landscape.
Use Dock, or for more precise control use the Anchor property. By setting Anchor to Left, Right, Top, Bottom the control will scale with the window. By setting Anchor to Right the control will move with the right border. By setting Anchor to Top and Bottom the control will scale vertically, but have a fixed width.
you can also use tablelayoutpanel and flowlayoutpanel controls.
For mobile, I think these controls are not available.
First of all, you should not just store the values from the web service in controls. They should be safely tucked away in one or more objects somewhere, to be easily accessed from your form.
I'm afraid you ahve to resize and/or change location of your controls depending on which mode you are in.
For developing resolution aware applications for .NET CF, see here:
http://msdn.microsoft.com/en-us/library/ms838174.aspx
I have a user control that has:
a) a buttons panel at the top (it always has to be visible)
b) a panel with controls that are dynamically added and re-sized at run-time. The controls can be many, so the panel has to be scrollable.
This user control will be hosted in a form, with the following requirements:
a) The initial size of the form will try to fit in maximum part of the dynamic content.
b) On changing the form size, the control has to be re-sized accordingly.
I had played with various anchoring, docking, and auto-sizing and I don't quite get it working in the way I want to. Sometimes, it is the scrolling that messes up, sometimes it is something else.
What combination of anchoring, docking, and auto-sizing of the panels, usercontrol, form should work best to achieve the desired outcome?
I succeeded to meet the requirements. Here is my solution:
The dynamic panel is anchored to the top and the bottom of the control. It does not AutoSize, it manually changes its MaximumSize and PreferredSize after change in the contents.
The form hosts the form using:
cntrl.AutoSize = true;
cntrl.AutoSizeMode = System.Windows.Forms.AutoSizeMode.GrowAndShrink;
cntrl.Dock = System.Windows.Forms.DockStyle.Fill;
The form subscribes to a custom control's event that notifies for the preferredHeight and it changes its own Height accordingly.
I'd go with a table layout panel. You can specify two rows by one column with the exact size for the buttons at the top and fill the rest with the bottom. Then put put either a normal panel or a flowlayoutpanel for the dynamic content in that area.
Without knowing the specifics of your problem I find multiple fill docked split containers with one fixed panel and/or a fixed slider usually creates a really handy resizing experience. You can also collapse panels very effectively too.