I need to get the Local IP address of PC but if pc is connected to multiple network the ip is not correct.
I'm using:
public static string GetIPAddress()
{
IPHostEntry host;
string localIP = "?";
host = Dns.GetHostEntry(Dns.GetHostName());
foreach (IPAddress ip in host.AddressList)
{
if (ip.AddressFamily == AddressFamily.InterNetwork)
{
localIP = ip.ToString();
}
}
return localIP;
}
Like:
I need get the local ip of adapter with internet or all local ip address.
I can see 2 options:
option 1
loop trough all interfaces using System.Net.NetworkInformation:
static List<IPAddress> GetIpAddress()
{
List<IPAddress> AllIps = new List<IPAddress>();
foreach (NetworkInterface netif in NetworkInterface.GetAllNetworkInterfaces())
{
IPInterfaceProperties properties = netif.GetIPProperties();
foreach (IPAddressInformation unicast in properties.UnicastAddresses)
{
AllIps.Add(unicast.Address);
Console.WriteLine(unicast.Address);
}
}
return AllIps;
}
option 2
find the default gateway to the internet, then match the default gateway address to the interface addresses you found:
public static IPAddress GetDefaultGateway()
{
IPAddress result = null;
var cards = NetworkInterface.GetAllNetworkInterfaces().ToList();
if (cards.Any())
{
foreach (var card in cards)
{
var props = card.GetIPProperties();
if (props == null)
continue;
var gateways = props.GatewayAddresses;
if (!gateways.Any())
continue;
var gateway =
gateways.FirstOrDefault(g => g.Address.AddressFamily.ToString() == "InterNetwork");
if (gateway == null)
continue;
result = gateway.Address;
break;
};
}
return result;
}
now you can combine the 2 options in order to find the interface that is connected to the internet. here is my suggestion to match the default gateway to the correct adapter address. you can also determine the IP address classes
using the IpClass Enumeration that is written in the code i have added:
static void Main(string[] args)
{
// find all interfaces ip adressess
var allAdaptersIp = GetIpAddress();
// find the default gateway
var dg = GetDefaultGateway();
// match the default gateway to the host address => the interface that is connected to the internet => that print host address
Console.WriteLine("ip address that will route you to the world: " + GetInterNetworkHostIp(ref allAdaptersIp, dg, IpClass.ClassC));
Console.ReadLine();
}
enum IpClass
{
ClassA,
ClassB,
ClassC
}
static string GetInterNetworkHostIp(ref List<IPAddress> adapters, IPAddress dg, IpClass ipclassenum)
{
string networkAddress = "";
var result = "" ;
switch (ipclassenum)
{
case IpClass.ClassA:
networkAddress = dg.ToString().Substring(0, dg.ToString().Length - dg.ToString().LastIndexOf(".") );
break;
case IpClass.ClassB:
networkAddress = dg.ToString().Substring(0, dg.ToString().Length - dg.ToString().IndexOf(".",3));
break;
case IpClass.ClassC:
networkAddress = dg.ToString().Substring(0, dg.ToString().Length- dg.ToString().IndexOf(".") );
break;
default:
break;
}
foreach (IPAddress ip in adapters)
{
if (ip.ToString().Contains(networkAddress))
{
result = ip.ToString();
break;
}
}
if (result == "")
result = "no ip was found";
return result;
}
I'm trying to get local ip address using this code in my website:
string ip = System.Web.HttpContext.Current.Request.ServerVariables["REMOTE_ADDR"];
The scenario is I try to call the website from 2 different ip address, the first call has been successfully but the second one is still displaying the first ip address.
But if I open the web using CTRL+SHIFT+R then both ip address were correct.
Somehow, the string ip = System.Web.HttpContext.Current.Request.ServerVariables["REMOTE_ADDR"]; is not refreshing and carried out the cache from previous call.
How do I get around this?
Below are several codes to get local ip address but it didn't work, it can only get the server ip (IIS IP) not the local ip
//code no 1
public static string GetLocalIPAddress()
{
var host = Dns.GetHostEntry(Dns.GetHostName());
foreach (var ip in host.AddressList)
{
if (ip.AddressFamily == AddressFamily.InterNetwork)
{
return ip.ToString();
}
}
throw new Exception("No network adapters with an IPv4 address in the system!");
}
//code no : 2
public static string[] GetAllLocalIPv4(NetworkInterfaceType _type)
{
List<string> ipAddrList = new List<string>();
foreach (NetworkInterface item in NetworkInterface.GetAllNetworkInterfaces())
{
if (item.NetworkInterfaceType == _type && item.OperationalStatus == OperationalStatus.Up)
{
foreach (UnicastIPAddressInformation ip in item.GetIPProperties().UnicastAddresses)
{
if (ip.Address.AddressFamily == AddressFamily.InterNetwork)
{
ipAddrList.Add(ip.Address.ToString());
}
}
}
}
return ipAddrList.ToArray();
}
//code no 3
public string GetLocalIpAddress2()
{
UnicastIPAddressInformation mostSuitableIp = null;
var networkInterfaces = NetworkInterface.GetAllNetworkInterfaces();
foreach (var network in networkInterfaces)
{
if (network.OperationalStatus != OperationalStatus.Up)
continue;
var properties = network.GetIPProperties();
if (properties.GatewayAddresses.Count == 0)
continue;
foreach (var address in properties.UnicastAddresses)
{
if (address.Address.AddressFamily != AddressFamily.InterNetwork)
continue;
if (IPAddress.IsLoopback(address.Address))
continue;
if (!address.IsDnsEligible)
{
if (mostSuitableIp == null)
mostSuitableIp = address;
continue;
}
// The best IP is the IP got from DHCP server
if (address.PrefixOrigin != PrefixOrigin.Dhcp)
{
if (mostSuitableIp == null || !mostSuitableIp.IsDnsEligible)
mostSuitableIp = address;
continue;
}
return address.Address.ToString();
}
}
return mostSuitableIp != null
? mostSuitableIp.Address.ToString()
: "";
}
//code no 4
public string GetIP4Address()
{
string IP4Address = String.Empty;
foreach (IPAddress IPA in Dns.GetHostAddresses(Dns.GetHostName()))
{
if (IPA.AddressFamily == AddressFamily.InterNetwork)
{
IP4Address = IPA.ToString();
break;
}
}
return IP4Address;
}
Thanks,
Sam
I try to get my local ip, the code below shows you how i do that.
The problem with this is when i'm connectet to wifi and my ethernet-card is not connected
it gives me a 169.xxx.xxx.xxx adress.
How can i make a check to see wich networkcard is connected, and get that ip
private string GetLocalIP()
{
IPHostEntry host;
host = Dns.GetHostEntry(Dns.GetHostName());
foreach (IPAddress ip in host.AddressList)
{
if (ip.AddressFamily == AddressFamily.InterNetwork)
return ip.ToString();
}
return "127.0.0.1";
}
I use this:
List<IPAddress> addresses = new List<IPAddress>();
NetworkInterface[] networkInterfaces = NetworkInterface.GetAllNetworkInterfaces();
foreach (NetworkInterface networkItf in networkInterfaces)
{
// check whether turned on
if (networkItf.OperationalStatus == OperationalStatus.Up)
{
// read the IP configuration for each network
IPInterfaceProperties properties = networkItf.GetIPProperties();
// each network interface may have multiple IP addresses
foreach (IPAddressInformation address in properties.UnicastAddresses)
{
// filter only IPv4 addresses, if required...
if (address.Address.AddressFamily != AddressFamily.InterNetwork)
continue;
// ignore loopback addresses (e.g., 127.0.0.1)
if (IPAddress.IsLoopback(address.Address))
continue;
// add result
addresses.Add(address.Address);
}
}
}
You can use the NetworkInterface class to see if there is a network interface that is indeed connected. Take a look at the relevant documentation here: https://msdn.microsoft.com/en-us/library/system.net.networkinformation.networkinterface(v=vs.110).aspx
This code snippet should give you the result you are interested in:
private string GetLocalIP()
{
var isConnected = System.Net.NetworkInformation.NetworkInterface.GetIsNetworkAvailable();
if (isConnected)
{
IPHostEntry host;
host = Dns.GetHostEntry(Dns.GetHostName());
foreach (IPAddress ip in host.AddressList)
{
if (ip.AddressFamily == AddressFamily.InterNetwork)
return ip.ToString();
}
}
return "127.0.0.1";
}
this works for me https://stackoverflow.com/a/27376368/7232036
private string localIP()
{
using (Socket socket = new Socket(AddressFamily.InterNetwork, SocketType.Dgram, 0))
{
socket.Connect("8.8.8.8", 65530);
IPEndPoint endPoint = socket.LocalEndPoint as IPEndPoint;
return endPoint.Address.ToString();
}
}
this will give the IP addresses you are looking for
foreach(NetworkInterface ni in NetworkInterface.GetAllNetworkInterfaces())
{
if(ni.NetworkInterfaceType == NetworkInterfaceType.Wireless80211 || ni.NetworkInterfaceType == NetworkInterfaceType.Ethernet)
{
Console.WriteLine(ni.Name);
foreach (UnicastIPAddressInformation ip in ni.GetIPProperties().UnicastAddresses)
{
if (ip.Address.AddressFamily == System.Net.Sockets.AddressFamily.InterNetwork)
{
Console.WriteLine(ip.Address.ToString());
}
}
}
}
I want the public IP address of the client who is using my website.
The code below is showing the local IP in the LAN, but I want the public IP of the client.
//get mac address
NetworkInterface[] nics = NetworkInterface.GetAllNetworkInterfaces();
String sMacAddress = string.Empty;
foreach (NetworkInterface adapter in nics)
{
if (sMacAddress == String.Empty)// only return MAC Address from first card
{
IPInterfaceProperties properties = adapter.GetIPProperties();
sMacAddress = adapter.GetPhysicalAddress().ToString();
}
}
// To Get IP Address
string IPHost = Dns.GetHostName();
string IP = Dns.GetHostByName(IPHost).AddressList[0].ToString();
Output:
Ip Address : 192.168.1.7
Please help me to get the public IP address.
This is what I use:
protected void GetUser_IP()
{
string VisitorsIPAddr = string.Empty;
if (HttpContext.Current.Request.ServerVariables["HTTP_X_FORWARDED_FOR"] != null)
{
VisitorsIPAddr = HttpContext.Current.Request.ServerVariables["HTTP_X_FORWARDED_FOR"].ToString();
}
else if (HttpContext.Current.Request.UserHostAddress.Length != 0)
{
VisitorsIPAddr = HttpContext.Current.Request.UserHostAddress;
}
uip.Text = "Your IP is: " + VisitorsIPAddr;
}
"uip" is the name of the label in the aspx page that shows the user IP.
You can use "HTTP_X_FORWARDED_FOR" or "REMOTE_ADDR" header attribute.
Refer method GetVisitorIPAddress from Machine Syntax blog .
/// <summary>
/// method to get Client ip address
/// </summary>
/// <param name="GetLan"> set to true if want to get local(LAN) Connected ip address</param>
/// <returns></returns>
public static string GetVisitorIPAddress(bool GetLan = false)
{
string visitorIPAddress = HttpContext.Current.Request.ServerVariables["HTTP_X_FORWARDED_FOR"];
if (String.IsNullOrEmpty(visitorIPAddress))
visitorIPAddress = HttpContext.Current.Request.ServerVariables["REMOTE_ADDR"];
if (string.IsNullOrEmpty(visitorIPAddress))
visitorIPAddress = HttpContext.Current.Request.UserHostAddress;
if (string.IsNullOrEmpty(visitorIPAddress) || visitorIPAddress.Trim() == "::1")
{
GetLan = true;
visitorIPAddress = string.Empty;
}
if (GetLan && string.IsNullOrEmpty(visitorIPAddress))
{
//This is for Local(LAN) Connected ID Address
string stringHostName = Dns.GetHostName();
//Get Ip Host Entry
IPHostEntry ipHostEntries = Dns.GetHostEntry(stringHostName);
//Get Ip Address From The Ip Host Entry Address List
IPAddress[] arrIpAddress = ipHostEntries.AddressList;
try
{
visitorIPAddress = arrIpAddress[arrIpAddress.Length - 2].ToString();
}
catch
{
try
{
visitorIPAddress = arrIpAddress[0].ToString();
}
catch
{
try
{
arrIpAddress = Dns.GetHostAddresses(stringHostName);
visitorIPAddress = arrIpAddress[0].ToString();
}
catch
{
visitorIPAddress = "127.0.0.1";
}
}
}
}
return visitorIPAddress;
}
Combination of all of these suggestions, and the reasons behind them. Feel free to add more test cases too. If getting the client IP is of utmost importance, than you might wan to get all of theses are run some comparisons on which result might be more accurate.
Simple check of all suggestions in this thread plus some of my own code...
using System.IO;
using System.Net;
public string GetUserIP()
{
string strIP = String.Empty;
HttpRequest httpReq = HttpContext.Current.Request;
//test for non-standard proxy server designations of client's IP
if (httpReq.ServerVariables["HTTP_CLIENT_IP"] != null)
{
strIP = httpReq.ServerVariables["HTTP_CLIENT_IP"].ToString();
}
else if (httpReq.ServerVariables["HTTP_X_FORWARDED_FOR"] != null)
{
strIP = httpReq.ServerVariables["HTTP_X_FORWARDED_FOR"].ToString();
}
//test for host address reported by the server
else if
(
//if exists
(httpReq.UserHostAddress.Length != 0)
&&
//and if not localhost IPV6 or localhost name
((httpReq.UserHostAddress != "::1") || (httpReq.UserHostAddress != "localhost"))
)
{
strIP = httpReq.UserHostAddress;
}
//finally, if all else fails, get the IP from a web scrape of another server
else
{
WebRequest request = WebRequest.Create("http://checkip.dyndns.org/");
using (WebResponse response = request.GetResponse())
using (StreamReader sr = new StreamReader(response.GetResponseStream()))
{
strIP = sr.ReadToEnd();
}
//scrape ip from the html
int i1 = strIP.IndexOf("Address: ") + 9;
int i2 = strIP.LastIndexOf("</body>");
strIP = strIP.Substring(i1, i2 - i1);
}
return strIP;
}
That code gets you the IP address of your server not the address of the client who is accessing your website. Use the HttpContext.Current.Request.UserHostAddress property to the client's IP address.
For Web Applications ( ASP.NET MVC and WebForm )
/// <summary>
/// Get current user ip address.
/// </summary>
/// <returns>The IP Address</returns>
public static string GetUserIPAddress()
{
var context = System.Web.HttpContext.Current;
string ip = String.Empty;
if (context.Request.ServerVariables["HTTP_X_FORWARDED_FOR"] != null)
ip = context.Request.ServerVariables["HTTP_X_FORWARDED_FOR"].ToString();
else if (!String.IsNullOrWhiteSpace(context.Request.UserHostAddress))
ip = context.Request.UserHostAddress;
if (ip == "::1")
ip = "127.0.0.1";
return ip;
}
For Windows Applications ( Windows Form, Console, Windows Service , ... )
static void Main(string[] args)
{
HTTPGet req = new HTTPGet();
req.Request("http://checkip.dyndns.org");
string[] a = req.ResponseBody.Split(':');
string a2 = a[1].Substring(1);
string[] a3=a2.Split('<');
string a4 = a3[0];
Console.WriteLine(a4);
Console.ReadLine();
}
So many of these code snippets are really big and could confuse new programmers looking for help.
How about this simple and compact code to fetch the IP address of the visitor?
string ip = System.Web.HttpContext.Current.Request.ServerVariables["HTTP_X_FORWARDED_FOR"];
if (string.IsNullOrEmpty(ip))
{
ip = System.Web.HttpContext.Current.Request.ServerVariables["REMOTE_ADDR"];
}
Simple, short and compact.
I have an extension method:
public static string GetIp(this HttpContextBase context)
{
if (context == null || context.Request == null)
return string.Empty;
return context.Request.ServerVariables["HTTP_X_FORWARDED_FOR"]
?? context.Request.UserHostAddress;
}
Note: "HTTP_X_FORWARDED_FOR" is for ip behind proxy. context.Request.UserHostAddress is identical to "REMOTE_ADDR".
But bear in mind it is not necessary the actual IP though.
Sources:
IIS Server Variables
Link
My version handles both ASP.NET or LAN IPs:
/**
* Get visitor's ip address.
*/
public static string GetVisitorIp() {
string ip = null;
if (HttpContext.Current != null) { // ASP.NET
ip = string.IsNullOrEmpty(HttpContext.Current.Request.ServerVariables["HTTP_X_FORWARDED_FOR"])
? HttpContext.Current.Request.UserHostAddress
: HttpContext.Current.Request.ServerVariables["HTTP_X_FORWARDED_FOR"];
}
if (string.IsNullOrEmpty(ip) || ip.Trim() == "::1") { // still can't decide or is LAN
var lan = Dns.GetHostEntry(Dns.GetHostName()).AddressList.FirstOrDefault(r => r.AddressFamily == AddressFamily.InterNetwork);
ip = lan == null ? string.Empty : lan.ToString();
}
return ip;
}
private string GetClientIpaddress()
{
string ipAddress = string.Empty;
ipAddress = HttpContext.Current.Request.ServerVariables["HTTP_X_FORWARDED_FOR"];
if (ipAddress == "" || ipAddress == null)
{
ipAddress = HttpContext.Current.Request.ServerVariables["REMOTE_ADDR"];
return ipAddress;
}
else
{
return ipAddress;
}
}
On MVC 5 you can use this:
string cIpAddress = Request.UserHostAddress; //Gets the client ip address
or
string cIpAddress = Request.ServerVariables["REMOTE_ADDR"]; //Gets the client ip address
In MVC IP can be obtained by the following Code
string ipAddress = Request.ServerVariables["REMOTE_ADDR"];
string IP = HttpContext.Current.Request.Params["HTTP_CLIENT_IP"] ?? HttpContext.Current.Request.UserHostAddress;
just use this..................
public string GetIP()
{
string externalIP = "";
externalIP = (new WebClient()).DownloadString("http://checkip.dyndns.org/");
externalIP = (new Regex(#"\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}")).Matches(externalIP)[0].ToString();
return externalIP;
}
We connect to servers that give us our external IP address and try to parse the IP from returning HTML pages. But when servers make small changes on these pages or remove them, these methods stop working properly.
Here is a method that takes the external IP address using a server which has been alive for years and returns a simple response rapidly...
https://www.codeproject.com/Tips/452024/Getting-the-External-IP-Address
Private string getExternalIp()
{
try
{
string externalIP;
externalIP = (new
WebClient()).DownloadString("http://checkip.dyndns.org/");
externalIP = (new Regex(#"\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}"))
.Matches(externalIP)[0].ToString();
return externalIP;
}
catch { return null; }
}
VB.NET
Imports System.Net
Private Function GetExternalIp() As String
Try
Dim ExternalIP As String
ExternalIP = (New WebClient()).DownloadString("http://checkip.dyndns.org/")
ExternalIP = (New Regex("\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}")) _
.Matches(ExternalIP)(0).ToString()
Return ExternalIP
Catch
Return Nothing
End Try
End Function
lblmessage.Text =Request.ServerVariables["REMOTE_HOST"].ToString();
You can download xNet at: https://drive.google.com/open?id=1fmUosINo8hnDWY6s4IV4rDnHKLizX-Hq
First, you need import xNet, code:
using xNet;
Code:
void LoadpublicIP()
{
HttpRequest httprequest = new HttpRequest();
String HTML5 = httprequest.Get("https://whoer.net/").ToString();
MatchCollection collect = Regex.Matches(HTML5, #"<strong data-clipboard-target="".your-ip(.*?)</strong>", RegexOptions.Singleline);
foreach (Match match in collect)
{
var val = Regex.Matches(match.Value, #"(?<ip>(\d|\.)+)");
foreach (Match m in val)
{
richTextBox1.Text = m.Groups[2].Value;
}
}
}
Let's say that I want to send an udp message to every host in my subnet (and then receive an udp message from any host in my subnet):
at the moment I do:
IPAddress broadcast = IPAddress.Parse("192.168.1.255");
but of course I want this to be done dinamically in the event that the subnet is different from 192.168.1/24. I've tried with:
IPAddress broadcast = IPAddress.Broadcast;
but IPAddress.Broadcast represents "255.255.255.255" which can't be used to send messages (it throws an exception)...so:
how do I get the local network adapter broadcast address (or netmask of course)?
THIS IS THE FINAL SOLUTION I CAME UP WITH
public IPAddress getBroadcastIP()
{
IPAddress maskIP = getHostMask();
IPAddress hostIP = getHostIP();
if (maskIP==null || hostIP == null)
return null;
byte[] complementedMaskBytes = new byte[4];
byte[] broadcastIPBytes = new byte[4];
for (int i = 0; i < 4; i++)
{
complementedMaskBytes[i] = (byte) ~ (maskIP.GetAddressBytes().ElementAt(i));
broadcastIPBytes[i] = (byte) ((hostIP.GetAddressBytes().ElementAt(i))|complementedMaskBytes[i]);
}
return new IPAddress(broadcastIPBytes);
}
private IPAddress getHostMask()
{
NetworkInterface[] Interfaces = NetworkInterface.GetAllNetworkInterfaces();
foreach (NetworkInterface Interface in Interfaces)
{
IPAddress hostIP = getHostIP();
UnicastIPAddressInformationCollection UnicastIPInfoCol = Interface.GetIPProperties().UnicastAddresses;
foreach (UnicastIPAddressInformation UnicatIPInfo in UnicastIPInfoCol)
{
if (UnicatIPInfo.Address.ToString() == hostIP.ToString())
{
return UnicatIPInfo.IPv4Mask;
}
}
}
return null;
}
private IPAddress getHostIP()
{
foreach (IPAddress ip in (Dns.GetHostEntry(Dns.GetHostName())).AddressList)
{
if (ip.AddressFamily == AddressFamily.InterNetwork)
return ip;
}
return null;
}
If you get the local IP and subnet, it should be no problem to calculate.
Something like this maybe?
using System;
using System.Net.NetworkInformation;
public class test
{
public static void Main()
{
NetworkInterface[] Interfaces = NetworkInterface.GetAllNetworkInterfaces();
foreach(NetworkInterface Interface in Interfaces)
{
if(Interface.NetworkInterfaceType == NetworkInterfaceType.Loopback) continue;
if (Interface.OperationalStatus != OperationalStatus.Up) continue;
Console.WriteLine(Interface.Description);
UnicastIPAddressInformationCollection UnicastIPInfoCol = Interface.GetIPProperties().UnicastAddresses;
foreach(UnicastIPAddressInformation UnicatIPInfo in UnicastIPInfoCol)
{
Console.WriteLine("\tIP Address is {0}", UnicatIPInfo.Address);
Console.WriteLine("\tSubnet Mask is {0}", UnicatIPInfo.IPv4Mask);
}
}
}
}
How to calculate the IP range when the IP address and the netmask is given? Should give you the rest of it.