I set my Visual Studio Exception Settings to Break When 'Common Language Runtime Exceptions' are thrown.
I have numerous routines where I catch exceptions, handle them and continue. When I'm debugging my program, I trust that these exceptions have been correctly handled and do not want the debugger to stop on them.
How can I prevent the debugger from stopping on handled exceptions?
(Note, I want to break on all other CLR exceptions)
I thought DebuggerStepThrough would do the trick. However it doesn't. The following code stops on 'Method1();'
using System;
namespace ConsoleApp8
{
class Program
{
static void Main(string[] args)
{
Method1();
}
[System.Diagnostics.DebuggerStepThrough]
static void Method1()
{
try
{
throw new InvalidOperationException();
}
catch (Exception ex)
{
Console.WriteLine(ex);
}
}
}
}
-- Edit --
Kirk - I only throw exceptions in exceptional situations. I work with Visual Studio Tools for Office. This MS library often throws exceptions that can be handled and ignored.
I would like to handle certain exceptions thrown by another library but prevent the VS2017 debugger from stopping when these errors occur.
To be clear, these exceptions are usually COM Exceptions. I don't want the debugger to ignore ALL COM Exceptions. I only want the debugger to ignore COM Exceptions that I have caught and handled.
Is this possible?
The debugger can break execution at the point where an exception is thrown, so you may examine the exception before a handler is invoked. In the Exception Settings window (Debug > Windows > Exception Settings), expand the node for a category of exceptions, such as Common Language Runtime Exceptions. There you can change the behaviour.
Some times in C# I would like to throw an exception that cannot be handled. An escalated exception that results in the process being stopped. Is this possible?
You could do something like:
class BadassException : Exception
{
public BadassException(string message)
{
Environment.FailFast(message);
}
}
...
throw new BadassException("Erk!!!");
How about simply closing the process like this:
Process.GetCurrentProcess().Close();
If you don't want an exception to be handled, don't handle it.
That's not an exception, that's an atomic bomb.
Seriously though, there are better ways of handling this scenario. If you're looking to terminate your process look at options like Application.Exit.
It's not really possible because every exception must inherit from the Exception base class, and you can do a catch(Exception).
However, as others have pointed out, you can fail fast. You can also throw exceptions that cannot be caught specifically, like so:
public class MyLibraryClass
{
private class MyException : Exception { ... }
public void MyMethod() { throw new MyException(); }
}
Then the caller cannot do a catch(MyException exc), only a catch(Exception exc). But still, that means the exception can be caught.
Any exception that is not handled will stop your application. Usually applications have an application or top level exception handler that catches any unhandled exceptions, does any data maintenance and shuts down the application gracefully.
In your case, I think the best approach is to create a new exception that derives from exception class called something like StopApplicationException.
Then whenever you need to stop your application, throw this type of exception. In your catch block further up the call stack:
catch (StopApplicationException)
{
//Stop your application
}
catch (ArgumentNullException)
{
//Null Exception Logic goes here...
}
catch ...And so forth
I have a try and catch in my Main.cs
try
{
}
catch(exception e)
{
Console.WriteLine(e.Message)
}
In a other class i have:
if (....)
{
//input
}
else
{
throw new Exception("Custom Error Message1"}
}
In a other class i have a similar situation, but insteed the message is different here.
When a error occurs in the 2nd class the same message from the one above displays, what exactly is the cause of this and what could prove to be a solution?
Thanks in advance.
Have you examined the stack trace? That might tell you something, n'est-ce-pas?
In Visual Studio, go to Debug-Exceptions and set Common Language Runtime exceptions to break when THROWN. Now run your program in debug and you'll see which exception is actually being thrown and can examine the call stack.
What are your thoughts on code that looks like this:
public void doSomething()
{
try
{
// actual code goes here
}
catch (Exception ex)
{
throw;
}
}
The problem I see is the actual error is not handled, just throwing the exception in a different place. I find it more difficult to debug because i don't get a line number where the actual problem is.
So my question is why would this be good?
---- EDIT ----
From the answers it looks like most people are saying it's pointless to do this with no custom or specific exceptions being caught. That's what i wanted comments on, when no specific exception is being caught. I can see the point of actually doing something with a caught exception, just not the way this code is.
Depending on what quality you are looking at it is not throwing the exception in a different place. "throw" without a target rethrows the exception which is very different from throwing an exception. Primarily a rethrow does not reset the stack trace.
In this particular sample, the catch is pointless because it doesn't do anything. The exception is happily rethrown and it's almost as if the try/catch didn't exist.
I think the construction should be used for handling the exceptions you know you will be throwing inside your code; if other exception is raised, then just rethrow.
Take into account that
throw;
is different than
throw ex;
throw ex will truncate the stack to the new point of throwing, losing valuable info about the exception.
public void doSomething()
{
try
{
// actual code goes here
}
catch (EspecificException ex)
{
HandleException(ex);
}
catch (Exception ex)
{
throw;
}
}
It wouldn't be, ideally the catch block would do some handling, and then rethrow, e.g.,
try
{
//do something
}
catch (Exception ex)
{
DoSomething(ex); //handle the exception
throw;
}
Of course the re-throw will be useful if you want to do some further handling in the upper tiers of the code.
Doing something like that is fairly meaningless, and in general I try not to go down the road of doing meaningless things ;)
For the most part, I believe in catching specific types of exceptions that you know how to handle, even if that only means creating your own exception with more information and using the caught exception as the InnerException.
Sometimes this is appropriate - when you're going to handle the exception higher up in the call stack. However, you'd need to do something in that catch block other than just re-throw for it to make sense, e.g. log the error:
public void doSomething()
{
try
{
// actual code goes here
}
catch (Exception ex)
{
LogException (ex); // Log error...
throw;
}
}
I don't think just rethrowing the error would be useful. Unless you don't really care about the error in the first place.
I think it would be better to actually do something in the catch.
You can check the MSDN Exception Handling Guide.
I've seen instances where generic exceptions are caught like this and then re-packed in a custom Exception Object.
The difference between that and what you're saying is that those custom Exception objects hold MORE information about the actual exception that happened, not less.
Well for starters I'd simply do
catch
{
throw;
}
but basically if you were trapping multiple types of exceptions you may want to handle some locally and others back up the stack.
e.g.
catch(SQLException sex) //haha
{
DoStuff(sex);
}
catch
{
throw;
}
Depends on what you mean by "looks like this", and if there is nothing else in the catch block but a rethrow... if that's the case the try catch is pointless, except, as you say, to obfuscate where the exception occurred. But if you need to do something right there, where the error occurred, but wish to handle the exception furthur up the stack, this might be appropriate. But then, the catch would be for the specific exception you are handl;ing, not for any Exception
Generally having exception handling blocks that don't do anything isn't good at all, for the simple reason that it prevents the .Net Virtual Machine from inlining your methods when performance optimising your code.
For a full article on why see "Release IS NOT Debug: 64bit Optimizations and C# Method Inlining in Release Build Call Stacks" by Scott Hanselman
Edit: I have looked at the answers code: NONE of them do what I want (I've checked). It would seem that there is no way to do what I want in native c#. I guess that's not a disaster just a shame given that .NET does support it (see accepted answer).
Thanks all.
I have c# code (part of a test framework that will never be run except under a debugger) like this who's point it to avoid actually catching the exception as that makes debugging the code in the unwound part of the stack a royal pain.
Bool bad = true;
try
{
MightThrow();
bad = false;
}
finally
{
if(bad) DoSomeLoggingOnFailure();
//// Does not catch!!!!
//// exception continues to unwind stack.
//// Note that re throwing the exception is NOT
//// the same as not catching it in the first place
}
is their a better way to do this?
A solution would have to behave exactly like that under the debugger with regards to un-caught exceptions. It would have to result in the only one first chance exception and the debugger breaking at the point that the exception was originally thrown, not in a catch block.
Specifically I need the debugger on un-caught exceptions to stop a in side MightThrow.
The following doesn't work because it fails to have the debugger break in the correct place
try { ... } catch { throw; }
And this doesn't work because it loses stack info (and also breaks in the wrong place).
try { ... } catch(Exception e) { throw e; }
I known that in D I could use a scope(failure) block
So, in .NET what you're asking for is theoretically possible, but it's not going to be easy.
CIL actually defines five types of exception handling block! The try, catch and finally ones you're used to in C#, and two others:
filter - similar to a catch block but can run arbitrary code to determine whether it wants to handle the error, rather than just matching on type. This block has access to the exception object, and has the same effect on the exception stack trace as a catch block.
fault - similar to a finally block, however it is only run when an exception occurs. This block does not have access to the exception object, and has no effect on the exception stack trace (just like a finally block).
filter is available in some .NET languages (e.g. VB.NET, C++/CLI) but is not available in C#, unfortunately. However I don't know of any language, other than CIL, that allows the fault block to be expressed.
Because it can be done in IL means not all is lost, though. In theory you could use Reflection.Emit to dynamically emit a function that has a fault block and then pass the code you want to run in as lambda expressions (i.e. one for the try part, one for the fault part, and so on), however (a) this isn't easy, and (b) I'm unconvinced that this will actually give you a more useful stack trace than you're currently getting.
Sorry the answer isn't a "here's how to do it" type thing, but at least now you know! What you're doing now is probably the best approach IMHO.
Note to those saying that the approach used in the question is 'bad practice', it really isn't. When you implement a catch block you're saying "I need to do something with the exception object when an exception occurs" and when you implement a finally you're saying "I don't need the exception object, but I need to do something before the end of the function".
If what you're actually trying to say is "I don't need the exception object, but I need to do something when an exception occurs" then you're half way between the two, i.e. you want a fault block. As this isn't available in C#, you don't have an ideal option, so you may as well choose the option that is less likely to cause bugs by forgetting to re-throw, and which doesn't corrupt the stack trace.
How about this:
try
{
MightThrow();
}
catch
{
DoSomethingOnFailure();
throw; // added based on new information in the original question
}
Really, that's all you did. Finally is for things that must run regardless of whether an exception occurred.
[Edit: Clarification]
Based on the comments you've been mentioning, you want the exception to continue being thrown without modifying its original stack trace. In that case, you want to use the unadorned throw that I've added. This will allow the exception to continue up the stack and still allow you to handle part of the exception. Typical cases might be to close network connections or files.
[Second edit: Regarding your clarification]
Specifically I need the debugger on
un-caught exceptions to stop at the
original point of the throw (in
MightThrow) not in the catch block.
I would argue against ever breaking a best-practice (and yes, this is a best-practice for partially handling exceptions) to add some minor value to your debugging. You can easily inspect the exception to determine the location of the exception throw.
[Final edit: You have your answer]
kronoz has thoughtfully provided you with the answer you sought. Don't break best practices -- use Visual Studio properly! You can set Visual Studio to break exactly when an exception is thrown. Here's official info on the subject.
I was actually unaware of the feature, so go give him the accepted answer. But please, don't go trying to handle exceptions in some funky way just to give yourself a hand debugging. All you do is open yourself up to more bugs.
If you're interested in the debugger simply stopping precisely where the exception occurred then have you considered first-chance exceptions?
If you open Tools|Exceptions then tick the Common Language Runtime Exceptions box, the debugger will stop at the point of exception regardless of any try/catch/finally blocks.
Update: You can specify the precise exception you wish to catch by expanding the [+] tree in the Exceptions dialog. Though of course it will fire every time any exception of the specified type[s] occur[s], you can switch it on and off at will even in the middle of a debugging session, so with judicious use of breakpoints you can get it to do your bidding. I used it successfully to get around the 'target of an invocation has thrown an exception' ball ache originating from using reflection to instantiate objects. Very useful tool in such circumstances. Also note the locals and stack trace should be firmly available as far as I recall (just did a quick test and they are available), so no problems there.
Of course if you want to log things then that is outside the scope of an IDE debugger; and in which case first-chance exceptions won't help you!
Give it a go at least; I found them very useful and they might be more appropriate for your issue than you think.
What's wrong with:
try
{
MightThrow();
}
catch
{
DoSomthingOnFailure();
throw;
}
For code that should only run on exceptions, use the catch block:
try
{
MightThrow();
}
catch (Exception ex)
{
// this runs only when there was an exception
DoSomthingOnFailure();
// pass exception on to caller
throw;
}
finally
{
// this runs everytime
Cleanup();
}
This is what you want. It will only call this method when an error occurs, and the "throw" statement will re-throw the exception with the callstack intact.
try
{
MightThrow();
}
catch
{
DoSomthingOnFailure();
throw;
}
A "finally" block that runs only on failure is called "catch" (with no parameters). :-)
Now, there is a small caveat. If you want to have a specialised "catch" case for a particular exception type and have a generic "catch" that works for all exceptions, you'll have to do a bit of a custom logic.
Thus, I would do something like:
try
{
MightThrow();
}
catch(MyException ex)
{
// Runs on MyException
MySpecificFailureHandler()
// Since we have handled the exception and can't execute the generic
// "catch" block below, we need to explicitly run the generic failure handler
MyGenericFailureHandler()
}
catch
{
// Runs on any exception hot handled specifically before
MyGenericFailureHandler()
// If you want to mimic "finally" behavior and propagate the exception
// up the call stack
throw;
}
finally
{
// Runs on any failure or success
MyGenericCleanupHandler();
}
Every example so far is losing the original StackTrace according to my tests. Here's a solution that should work for you.
private static void PreserveStackTrace(Exception exception)
{
MethodInfo preserveStackTrace = typeof(Exception).GetMethod("InternalPreserveStackTrace",
BindingFlags.Instance | BindingFlags.NonPublic);
preserveStackTrace.Invoke(exception, null);
}
try
{
MightThrow();
}
catch (Exception ex)
{
DoSomethingOnFailure();
PreserveStackTrace(ex);
throw;
}
How about only catching an exception that "MightThrow" does not throw?
Bool bad = true;
try
{
MightThrow();
bad = false;
}
catch (SomePrivateMadeUpException foo)
{
//empty
}
finally
{
if(bad) DoSomeLoggingOnFailure();
}
Let me recap your requirements the way I understand them:
You want some code that is run only when an exception is generated, in order to do some logging.
You want to run your test framework under debugger and break at the point at which the exception is thrown.
To meet your first requirement, you should write the code the way everybody suggested - using parameterless catch and throw.
To meet your second requirement while using the parameterless catch, you could configure your debugger to break when an exception is throw, not only when there's an unhandled exception. I suspect you know how to do it, but I'll put it here for answer completeness: in VS you can do that in Debug -> Exception -> Common Language Runtime Exceptions -> check the Thrown checkbox.
If you know that your app throws a lot of handled exceptions, that might not be an option for you. At that point, your only choice left to meet your first requirement is to either write the code to use finally for exception logging purposes or look into the direct IL emitting route as Greg Beech suggests.
However, whether the finally code is being executed depends on the debugger you are using. In particular, VS will break on an unhadled exception before the finally is executed and will not let you continue. Thus, unless you detach from the process at that point, your logging code will never be executed. In other words, the second requirement will interfere with meeting the first requirement.
You could encapsulate your logic in a custom class, something like:
public class Executor
{
private readonly Action mainActionDelegate;
private readonly Action onFaultDelegate;
public Executor(Action mainAction, Action onFault)
{
mainActionDelegate = mainAction;
onFaultDelegate = onFault;
}
public void Run()
{
bool bad = true;
try
{
mainActionDelegate();
bad = false;
}
finally
{
if(bad)
{
onFaultDelegate();
}
}
}
}
And use it as:
new Executor(MightThrow, DoSomeLoggingOnFailure).Run();
Hope this helps.
Isn't this the same as:
try
{
MightThrow();
}
catch (Exception e)
{
DoSomethingOnFailure();
throw e;
}
?
You could write, or have someone write for you, a small assembly in VB.net which implements a TryFaultCatchFinally(of T) method that accepts four delegates:
TryMethod -- An Action(of T) to perform the "Try" block.
FaultMethod -- A Predicate(Of T, Exception) which, if an exception occurs, will be called before any "finally" blocks run; if it returns true the Catch block will run--otherwise it won't.
CatchMethod -- An Action(Of T, Exception) to be performed if an exception had occurred and FaultMethod returned true; happens after "finally" blocks run.
FinallyMethod -- An Action(OF T, Exception, Boolean) to be performed as a "Finally" block. The passed-in exception will be null if TryMethod ran to completion, or will hold the exception that caused it to exit. The Boolean will be true if the exception was caught, or false otherwise.
Note that when the FaultMethod is executed, one may be able to examine the state of objects that caused the exception, before such state is destroyed by Finally blocks. One must use some care when doing this (any locks that were held when the exception was thrown will continue to be held) but the ability may still sometimes be handy, especially when debugging.
I'd suggest the routine look something like:
Shared Sub TryFaultCatchFinally(Of T)(ByVal TryProc As Action(Of T), _
ByVal FaultProc As Func(Of T, Exception, Boolean), _
ByVal CatchProc As Action(Of T, Exception), _
ByVal FinallyProc As Action(Of T, Exception, Boolean), _
ByVal Value As T)
Dim theException As Exception = Nothing
Dim exceptionCaught As Boolean = False
Try
TryProc(Value)
theException = Nothing
exceptionCaught = False
Catch Ex As Exception When CopyExceptionAndReturnFalse(Ex, theException) OrElse FaultProc(Value, Ex)
exceptionCaught = True
CatchProc(Value, Ex)
Finally
FinallyProc(Value, theException, exceptionCaught)
End Try
End Sub
No, I think this is a common idiom the way you have it.
EDIT
To be clear, the "catch" then "rethrow" strategies offer the same run-time semantics, however they change the experience when the VS debugger is attached. Tooling and maintenance is important; debugging often requires you to 'catch all first-chance exceptions' and if you end up with lots of 'spurious' first-chance exceptions due to catch-then-rethrow in your code, it really hurts the ability to debug the code. This idiom is about interacting well with the tooling, as well as clearly expressing the intent (you don't want to 'catch', decide can't handle, and rethrow, instead you just want to log that an exception did happen but let it pass on by).
Have you considered using the DebuggerStepThrough attribute?
http://msdn.microsoft.com/en-us/library/system.diagnostics.debuggerstepthroughattribute.aspx
[DebuggerStepThrough]
internal void MyHelper(Action someCallback)
{
try
{
someCallback();
}
catch(Exception ex)
{
// Debugger will not break here
// because of the DebuggerStepThrough attribute
DoSomething(ex);
throw;
}
}
With exception filters added in C# 6, one option is to make use of a false returning exception filter, like so:
void PerformMightThrowWithExceptionLogging()
{
try
{
MightThrow();
}
catch (Exception e) when (Log(e))
{
// Cannot enter here, since Log returns false.
}
}
bool Log(Exception e)
{
DoSomeLoggingOnFailure(e);
// Return false so the exception filter is not matched, and therefore the stack is kept.
// This means the debugger breaks where the exception actually happened, etc.
return false;
}
See https://learn.microsoft.com/en-us/dotnet/csharp/language-reference/keywords/try-catch for more details on exception filters.
try
{
MightThrow();
}
catch
{
DoSomethingOnFailure();
}