Below specified is c# code and i am using asp.net with c#,The below code describes the date difference it will update the table after 2 months,
cmd3.CommandText = "update TrackingFaculty_det "
+ "SET Type=#Type WHERE "
+ "DATEDIFF(d,TrackingFaculty_det.LastUpdateDate,#Today)>60";
I need to hardcode the month value into web.config,so that if i want to change the date difference to three months or so on,so that in web.config if i make a change then the changes will occur in every c# pages where i have these lines of code.
My Web.Config is as below
<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
\Windows\Microsoft.Net\Framework\v2.x\Config
-->
<configuration>
<appSettings/>
<connectionStrings>
<add name="ProjectConnectionString" connectionString="Data S ource=BOPSERVER;Initial Catalog=Project;Integrated Security=True" providerName="System.Data.SqlClient"/>
<add name="ProjectConnectionString2" connectionString="Data Source=BOPSERVER;Initial Catalog=Project;Integrated Security=True" providerName="System.Data.SqlClient"/>
<add name="ProjectConnectionString3" connectionString="Data Source=BOPSERVER;Initial Catalog=Project;Integrated Security=True" providerName="System.Data.SqlClient"/>
</connectionStrings>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
-->
<compilation debug="true" targetFramework="4.0">
<assemblies>
<add assembly="Microsoft.Office.Interop.Word, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71E9BCE111E9429C"/></assemblies>
</compilation>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Windows"/>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
<pages controlRenderingCompatibilityVersion="3.5" clientIDMode="AutoID"/></system.web>
Add key in web.config like this
<configuration>
....
<appSettings>
<add key="Difference" value="60"/>
</appSettings>
....
</configuration>
get key from web.config like this
string str_Diff = WebConfigurationManager.AppSettings["Difference"].ToString();
cmd3.CommandText =
"update TrackingFaculty_det "
+ "SET Type=#Type WHERE "
+ "DATEDIFF(d,TrackingFaculty_det.LastUpdateDate,#Today) > " + str_Diff;
Web.config code
<configuration>
....
<appSettings>
<add key="Difference" value="60"/>
</appSettings>
....
</configuration>
get key from web.config
string str_diff = Convert.ToString(ConfigurationManager.AppSettings["Difference"]);
cmd3.CommandText = "update TrackingFaculty_det SET Type=#Type WHERE (FID=#FID) and DATEDIFF(d,TrackingFaculty_det.LastUpdateDate,#Today)>'"+str_diff+"'";
This is what i needed and i got the solution
Related
I have this web.config file with the compilation option set as below:
<configuration>
...
<system.web>
<compilation debug="true" targetFramework="4.5" />
</system.web>
</configuration>
How to turn off the compilation's debug flag to false via VSTS's Build Definitions?
Update:
I'm deploying the system to Azure server by VSTS's release function.
You can use transformation to achieve what you want.
here is the documenation:
https://learn.microsoft.com/en-us/aspnet/web-forms/overview/deployment/visual-studio-web-deployment/web-config-transformations
Here is how your Web.debug.config file should look. You can also use web.release.config if you want to use transform in release mode.
<?xml version="1.0"?>
<!-- For more information on using Web.config transformation visit http://go.microsoft.com/fwlink/?LinkId=301874 -->
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
<!--
In the example below, the "SetAttributes" transform will change the value of
"connectionString" to use "ReleaseSQLServer" only when the "Match" locator
finds an atrribute "name" that has a value of "MyDB".
<connectionStrings>
<add name="MyDB"
connectionString="Data Source=ReleaseSQLServer;Initial Catalog=MyReleaseDB;Integrated Security=True"
xdt:Transform="SetAttributes" xdt:Locator="Match(name)"/>
</connectionStrings>
-->
<system.web>
<compilation debug="false" xdt:Transform="Replace"/>
<!--
In the example below, the "Replace" transform will replace the entire
<customErrors> section of your Web.config file.
Note that because there is only one customErrors section under the
<system.web> node, there is no need to use the "xdt:Locator" attribute.
<customErrors defaultRedirect="GenericError.htm"
mode="RemoteOnly" xdt:Transform="Replace">
<error statusCode="500" redirect="InternalError.htm"/>
</customErrors>
-->
</system.web>
</configuration>
I have literally uncommented the boilerplate code and tried to publish to the file system to check if the "transform" works.
However, it does not transform the web.config file. I have look at the some articles and answers on here but cannot get it to work.
Things I tried:
Removing the namespace from the configuration node(complains about xdt missing)
Creating a new transform file(production)
Creating a new configuration(production)
Here is the web.Release.config:
<?xml version="1.0"?>
<!-- For more information on using Web.config transformation visit https://go.microsoft.com/fwlink/?LinkId=301874 -->
<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
<!--
In the example below, the "SetAttributes" transform will change the value of
"connectionString" to use "ReleaseSQLServer" only when the "Match" locator
finds an attribute "name" that has a value of "MyDB".
<connectionStrings>
<add name="MyDB"
connectionString="Data Source=ReleaseSQLServer;Initial Catalog=MyReleaseDB;Integrated Security=True"
xdt:Transform="SetAttributes" xdt:Locator="Match(name)"/>
</connectionStrings>
-->
<connectionStrings>
<add name="MyDB"
connectionString="Data Source=ReleaseSQLServer;Initial Catalog=MyReleaseDB;Integrated Security=True"
xdt:Transform="SetAttributes" xdt:Locator="Match(name)"/>
</connectionStrings>
<system.web>
<compilation xdt:Transform="RemoveAttributes(debug)" />
<!--
In the example below, the "Replace" transform will replace the entire
<customErrors> section of your Web.config file.
Note that because there is only one customErrors section under the
<system.web> node, there is no need to use the "xdt:Locator" attribute.
<customErrors defaultRedirect="GenericError.htm"
mode="RemoteOnly" xdt:Transform="Replace">
<error statusCode="500" redirect="InternalError.htm"/>
</customErrors>
-->
</system.web>
</configuration>
I get the following error:
No element in the source document matches '/configuration/connectionStrings/add[#name='MyDB']'
But as you can see it is present in the add node.
Any suggestions what to do? I am confused why it isn't working.
Edit:
web.config connection string
<connectionStrings>
<add name="DefaultConnection" connectionString="Data Source=.\SQLExpress;database=smartDB;Integrated Security=True" providerName="System.Data.SqlClient" />
</connectionStrings>
The value of the name attribute needs to match between your web.config and web.release.config, since you are specifying Match(name) in the transformation config.
In your web.config you have: name="DefaultConnection"
In your web.release.config: name="MyDB"
After following all the guides, SO pages and troubleshooting pages I can find I'm finally out of ideas.
I've got Glimpse working fine on my local dev server, but when I deploy my ASP.net (MVC5) app to my remote server it doesn't work - at all. /glimpse.axd gives a 404 with both LocalPolicy and ControlCookiePolicy set to ignore, and with a custom security policy that returns On in all cases. My understanding is that with ControlCookiePolicy disabled, I shouldn't need to go to /glimpse.axd to enable it - but I'm not seeing the glimpse icon on the remote server either.
Even if I go to the remote server and browse localhost to /glimpse.axd I still get a 404.
My web.config looks like this:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<section name="glimpse" type="Glimpse.Core.Configuration.Section, Glimpse.Core" />
</configSections>
<system.web>
<compilation debug="false" />
<httpRuntime targetFramework="4.5.1" relaxedUrlToFileSystemMapping="true" />
</system.web>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true">
<remove name="FormsAuthentication" />
</modules>
<urlCompression doDynamicCompression="true" dynamicCompressionBeforeCache="false" />
</system.webServer>
<glimpse defaultRuntimePolicy="On" endpointBaseUri="~/Glimpse.axd">
<logging level="Trace" />
<runtimePolicies>
<ignoredTypes>
<add type="Glimpse.AspNet.Policy.LocalPolicy, Glimpse.AspNet" />
<add type="Glimpse.Core.Policy.ControlCookiePolicy, Glimpse.Core" />
</ignoredTypes>
</runtimePolicies>
</glimpse>
</configuration>
This is the version off the remote server (after transform). I've trimmed it a little to remove sections like appSettings.
My GlimpseSecurityPolicy.cs looks like this:
// Uncomment this class to provide custom runtime policy for Glimpse
using Glimpse.AspNet.Extensions;
using Glimpse.Core.Extensibility;
namespace RationalVote
{
public class GlimpseSecurityPolicy:IRuntimePolicy
{
public RuntimePolicy Execute(IRuntimePolicyContext policyContext)
{
return RuntimePolicy.On;
}
public RuntimeEvent ExecuteOn
{
// The RuntimeEvent.ExecuteResource is only needed in case you create a security policy
// Have a look at http://blog.getglimpse.com/2013/12/09/protect-glimpse-axd-with-your-custom-runtime-policy/ for more details
get { return RuntimeEvent.EndRequest | RuntimeEvent.ExecuteResource; }
}
}
}
The real one does an actual check, but I get the same issue with the policy above.
I cannot seem to find any trace output anywhere on the remote server, it is logging fine on my local machine.
I am deploying using the Visual Studio publish to web feature, and I've verified that the Glimpse.Core.dll is in the bin folder.
I can't see anything in the event log that is relevant.
I've also added <add namespace="Glimpse.Mvc.Html" /> to the namespaces block of the web.config in the views folder.
I tried putting #Html.GlimpseClient() in the _Layout.cshtml file just above </body> but this renders nothing.
Anybody got any ideas?
If the glimpse.axd is returning a 404 then this means the Glimpse resource handler is not registered.
If the web.config content you show above is not trimmed to much, then it is normal that Glimpse won't do much as the Glimpse HttpModule and the Glimpse HttpHandler are not registered in the system.web and/or the system.webserver sections like this
<system.web>
<httpModules>
<add name="Glimpse" type="Glimpse.AspNet.HttpModule, Glimpse.AspNet"/>
</httpModules>
<httpHandlers>
<add path="glimpse.axd" verb="GET" type="Glimpse.AspNet.HttpHandler, Glimpse.AspNet"/>
</httpHandlers>
</system.web>
<system.webServer>
<validation validateIntegratedModeConfiguration="false"/>
<modules>
<add name="Glimpse" type="Glimpse.AspNet.HttpModule, Glimpse.AspNet" preCondition="integratedMode"/>
</modules>
<handlers>
<add name="Glimpse" path="glimpse.axd" verb="GET" type="Glimpse.AspNet.HttpHandler, Glimpse.AspNet" preCondition="integratedMode" />
</handlers>
</system.webServer>
Maybe your transform removed to much from the local web.config?
I have got this error below
HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid.
Detailed Error Information
Module Authentication
Notification AuthenticateRequest
Handler ExtensionlessUrl
Handler-Integrated-4.0
Error Code 0x80070021
Config Error This configuration section cannot be used at this path.
This happens when the section is locked at a parent level. Locking is either by
default (overrideModeDefault="Deny"), or set explicitly by a location tag with
overrideMode="Deny" or the legacy allowOverride="false".
this is my config file
<configuration>
<connectionStrings>
<add name="DBConnection" connectionString="data source=12.12.16.117;Initial Catalog=web_prof_global; User ID=1111;Password=1111;persist security info=True;packet size=4096" providerName="System.Data.SqlClient" />
<add name="DBConnectionSf" connectionString="data source=12.12.16.117;Initial Catalog=webCommon; User ID=1111;Password=1111;persist security info=True;packet size=4096" providerName="System.Data.SqlClient" />
</connectionStrings>
<system.web>
<compilation debug="false" targetFramework="4.0" />
</system.web>
<system.webServer>
<security>
<authentication>
<basicAuthentication enabled="true" />
</authentication>
</security>
<modules runAllManagedModulesForAllRequests="true" />
<defaultDocument>
<files>
<add value="s-f.aspx" />
</files>
</defaultDocument>
</system.webServer>
</configuration>
can you please help
I wonder if anybody know a solution to achieve this.
Basically, I need to build a website like -
1) www.domain1.com/subApp1 goes to one database and one appsettings.
2) www.domain1.com/subApp2 goes to one database and one appsettings.
In Webform application - I point the main domain (www.domain1.com) to a folder (landing) with a web.config which contains
<location path="subApp1">
<connectionStrings>
<clear/>
<add name="SchemaConnection" connectionString="data source=dev;initial catalog=Schema;user id=sa;password=password" providerName="System.Data.SqlClient" />
</connectionStrings>
<appSettings>
<add key="brandName" value="subApp1"/>
<add key="ImageLocation" value="~/uploaded/subApp1/"/>
</appSettings>
</location>
<location path="subApp2">
<connectionStrings>
<clear/>
<add name="SchemaConnection" connectionString="data source=dev;initial catalog=Schema2;user id=sa;password=password" providerName="System.Data.SqlClient" />
</connectionStrings>
<appSettings>
<add key="brandName" value="subApp2"/>
<add key="ImageLocation" value="~/uploaded/subApp2/"/>
</appSettings>
</location>
That works fine. But in MVC, It ain't working. I hope there is a way to do in MVC to achieve this. Please advice if anyone know.