Hi To All Good Programmers,
I am developing a web-based app in which I need to generate some kind of reports. To do that, I prefer to use .rdlc embedded in VS 2010. There is a report named 'AccountReport' in which table rows are grouped according to some field of the table and it works fine.
The Problem: I need to add the Sum of a column as the last record of each group, the Sum is not a field of database table.. So How can I group it?
Here is a snap shot of what I need as the result. I have it already except the last record(row).
How Can I rich the 'Total' Record? It is grouped by the 'Current Asset'. This image is prepared using MS Word of course.
Any Idea pleas?
You need to use the Sum Function of Visual Studio Report Designer. Add a row in your report to show the total. Use the SUM function with your desired columnn name to set the expression. Check this answer for step by step pictorial details Sum of Column Values in rdlc report.
See similar question here
Related
I am using Crystal Reports and VS 2010. The Crystal Report is displaying data from 2 tables in a DataSet.
Table 1 (GetReceptionInfo) contains some info in the report header: name, Id, date, time.
Table 2 (SelectReceptionWork) contains records in the details part of the report.
When I am trying to view the CR when there are returned records in Table 2 the CR works fine, but when I try to view it when no records are returned (only in Table 2 but Table 1 HAS records) the Crystal Report is all empty.
I previewed Table 1 from the DataSet and it works fine, but not on the report.
I tried the following steps but the result is still the same (also verified the database after every single change):
Removed all links from Database Expert.
Set DataSet property of EnforceConstraints to False.
Deleted all primary keys on the DataSet.
Removed Table 1 from Database Expert and added it again.
Database Expert no links or indexes:
DataSet with no keys, tables are not related:
If the issue is not clear I can post a screenshot of the report, but I'm afraid it might not be clear because it is written in Arabic.
Option A: If GetReceptionInfo and SelectReceptionWorkWhen can be joined. Then you need to join the tables using a left join - not an equal join. When you are on the "Links" tab, click and drag from the field you want to join to the field you want to join to. This will create a little line. THEN, double-click on that line. It will pop-up a page which lets you pick which join type you want. Select "Left Outer Join"
Option B: If GetReceptionInfo and SelectReceptionWorkWhen are not intended to be joined, then your best bet is to remove the header table (GetReceptionInfo) from the main report. Only include the table SelectReceptionWork. This should list all the data you want. But then you still need to display that header information. So for that, create a SubReport that uses only GetReceptionInfo as its data source, and add that SubReport into the Report Header (or Page Header) section of the crystal report.
I'm trying to do a sales report that lists each order with a little plus icon beside it, once clicked the order row should expand to show the order details. I'm using the reportviewer for the first time and having it working to show the basic order info.
What I'd like to have now is each row expand when clicked to show the order details. So row 1 might list the buyers name, address etc and when clicked you see what they bought.
Given that I'm totally new at this kind of reporting (never heard of Tablix before using this reportviewer) is there a relatively easy way of displaying this data?
did you check http://www.gotreportviewer.com/?
I am using RDLC report in Win-form. I want to add the Below Page as Summary. That's mean, I want to add this page as separate page in Report.
My Friends Working in Fox pro. He said it possible in Summary Field, Its Like a Footer. But Can't able to Find That. Pls Help Me.
The Committee has considered the following aspects before finalizing the attendance%
for the B.Sc H&HA I year I semester Students,
1. Students involved in attending ODC, Exhibitions and other functions
deputed by the college.
2. Students who had shortage of attendance were instructed to attend the classes in
the weekend / Holidays. Classes were conducted by the staff who
were stationed at the Institute.
As directed by the principal, in the interest of the students and due to the semester pattern,
It has been decided to consider overall attendance % for the eligibility to write
the NCHM semester examination 2011.
(Mr.Elangovan) (Mr.Mathew) (Mr. Senthil Kumar) (Ms. Sharmila) ( Ms. Parimala) (Mr. Thirulogchander)
(PRINCIPAL)
Sounds like you just need to add a page break before your summary text:
http://msdn.microsoft.com/en-us/library/ms251701(v=vs.80).aspx
Yeah, Foxpro makes things like that very easy... Not knowing your data source, and if you could adjust by adding a column/field to the output per row. I would add a column of a blob (or Memo from FoxPro) where you can just dump a bunch of text to it. Then on the last record of the data to be printed, have this column printed. Since it won't exist for any previous records, it wont otherwise cause a conflict with any other content. Then, as Daniel mentioned, you can throw a force page break so this content shows on its own page.
I agree that it will probably be easier to add a page break to your report and add your info page above to that page. I don't know what you are using to create your report Visual Studio 2005/2008 but here are some instructions on adding a page break in VS 2005.
How to Set Page Breaks
Defining Page Size and Page Breaks
I am not sure of how your report is set up but if you instructions do specify the following:
To add a page break to a report item
Right-click the report item and then click Properties.
**Note**
Item page breaks apply only to the report items rectangle, table, matrix, list, and chart.
On the General tab, for Page breaks, select Insert a page break before this list (rectangle, table, or matrix) or Insert a page break after this list (rectangle, table, or matrix).
So keep in mind that applying the page break to an item it has to be a rectangle, table, etc. I just did a test in VS2005 and added a rectangle, then placed a text box inside with the data from above and it placed it on a separate page in the report.
Hope this helps.
This might be a pretty simple question but I'm a Crystal Reports newbie...I have a report where I want specific pages that have a corresponding column omitted. So for example say it has someone's name and information on every page, how would I use a column that for example has the state on it, to omit certain results, like I don't want any pages in the report generated from states that have the "state column" from the database equal to like "TX" or something. This isn't what I'm actually doing, but it's an example of the functionality I want.
I'm thinking it would be in either the group or record selection formulas but I'm not sure how to go about putting it together to not create a page for the results when a certain column is equal to a value.
-Thanks from a total Crystal Reports noob.
So each page of the report is one record in the result set (someone's name and information) and you want to exclude some pages based on the value of one of the columns?
Perhaps I'm not understanding the problem correctly but can't you just change the datasource query?
WHERE state <> 'TX'
Please Help!
I asked my Q in many Forums but i did'nt recieve any clear answer.
This is my Q:
I created a table in a Details Section and I have a Title Col and Point Col in this table how can I write code to find Title of max point in my table???
this is my .rpt overview:
(source: googlepages.com)
you see i have 3 cols in Details Section. Point,BitParagonTitle,Alphabet.
I want to show BitParagonTitle to user according to Maximum of point in footer of report.
How can I perform this in Crystal report? please Help me!!!
So I want to:
Find Maximum Value of point Column.
Find title of Max Point.
I created a collection of Data Object in an ArrayList as report DataSource.
Please Help me to write some crystal report scripts to find Title of Max Point and show it in Group Footer.
This is Important that I dont use SQL DB Procedures or tables as data source and I Collected Data manually as I said.
I am not sure of all of your requirements, but if you don't mind the Details being sorted the easiest way is to group by the Point column and then if the points are sorted ascending you can simply put the field title and point fields in the Point group footer. This will only display the last row of the Point column which in turn will be the maximum since it is sorted asc.
This will give you the maximum row so if you didn't care to see the other rows you can simply suppress the details section. Hope this makes sense and helps.
You'll need to use a pair of global Crystal variables in a formula that is evaluated in the Details section, as well as two other formulas referring to those variables.
The two variables are to store the max of point, and the title associated with that (so presumably a NumberVar and a StringVar, say called MaxPoint and MaxPointTitle).
One formula goes in the Report Header, and simply initialises the two variables to zero and empty string.
The second goes in the Details section. It evaluates if the current Point value is higher than that stored in the MaxPoint variable. If so, it stores the new value in MaxPoint and the current title in MaxPointTitle.
In the Report footer, a third formula is used to display the title and/or value.
If you want group max values rather than overall ones, move the formula in the Report header to the Group header, and from the Report footer to the Group footer, and it should work.