Just as the question says.
I am using IIS 6 to send emails out from my Windows Server with C#. I want to detect bounces with C# from the SMTP email server. Right now, all the bounces get sent to a Gmail account. I could just check and parse each email in that account, but I was wondering if there is any easier way like hooking up a windows service or something to the IIS 6 SMTP server.
Help?
Thanks!
I know little about the IIS6 SMTP server, but based on what I know about SMTP in general, I doubt you're going to have much luck. Your message to joe#foo.com gets forwarded from server to server until it ends up at the foo.com SMTP server, which then responds to the reply-to address that the "joe" mailbox doesn't exist. That server may have no direct contact with your SMTP server at all.
As a result, there's no opportunity for the IIS6 SMTP server to receive any information about the bounced message. I think your existing idea of polling the inbox for the reply-to address is probably going to be your best bet.
Related
I have deployed a website (ASP.Net/C#) on my windows server 2012 R2 (it's a VPS and I installed IIS and SMTP), and everything works fine except one thing: I CANNOT send mail through my website!
I searched and tried everything but it still doesn't work! When I was debugging my application on local, it worked fine. Now I know I have to change my settings to send mail but I don't know what I should indicate
I'm sending my emails from a mail address that use pop3 server "relay.skynet.be" (this is the server I used when I was debugging and it worked) but when I do it on the website I got an error... So I changed it to the name of the server where my VPS is hosted (OVH) and it still doesn't work... I also changed the different credentials (in my code or in the SMTP in IIS) but the result is the same...
So I'm asking these questions:
In my code (C#), what should I indicate?? Which server should I indicate? And which credentials?
On Windows Server, in the SMTP settings in IIS, what should I choose? Should I indicate the e-mail address with which I send my emails? Do I have to check the "Use localhost" for the SMTP server to use or indicate the server of my mail address (relay.skynet.be) or the one from OVH? And for the credentials, what do I have to check? "Not required", "Windows" or "Specify Credentials" (with my mail address credentials?)
I have a strong feeling that you are simply missing the infrastructure - specifically, you are missing an SMTP server. SMTP server is responsible for delivering (or forwarding) your email.
Neither POP3 nor IMAP protocols are used for sending emails.
If this is the case, I suggest you try using hotmail or gmail mail account. You can find the settings for both here, respectively:
http://www.serversmtp.com/en/smtp-hotmail
http://www.serversmtp.com/en/smtp-gmail-configuration
Hope this helps.
I'm developing an ASP.NET MVC application that needs to transmit sensitive information via email. I'm aware of using S/MIME to encrypt the email contents end-to-end, but I cannot use it for various reasons. I also realize, however, that the emails would be sent in plain-text from the web host's SMTP server to the destination email servers, opening up a serious man-in-the-middle vulnerability. Therefore, I need to ensure that the outgoing SMTP server will transmit a message ONLY IF it can establish a TLS/SSL connection with the destination mail server.
I've been searching for a while and can't even figure out where in the process that decision is made. Most answers address enforcing TLS between the application and the SMTP server, which I've already solved. Can anyone shed some light on this? Thanks.
What you are trying to do is not possible. Once you've submitted the mail to the mail server you've lost control over it. There is no way to instruct the server (and all following server in the path) to only deliver the mail with TLS.
I am Creating an application in c# . I have to know how can I know the status of the sended email.The status May be.
4. Track sent emails to determine if they were:
4.1 delivered
4.2 opened
4.3 recipient opt-out
4.4 bounced (with the reason for the bounce)
4.5 time/date sent
4.6 which links in the email were clicked (and time/date they were clicked)
4.7 IP address, if user clicked any links in the email
Should I use Any API or Dll or something else.Please help .Any Help will be Appreciated.
If you program your application to send mail through a hosted SMTP server like http://www.sendgrid.com or http://www.ultrasmtp.com, you can access the delivery status of messages that you've sent.
There is no easy way to do what you want. Actually this status can be tracked by your SMTP server itself and if you are using some third-party SMTP server like GMail or any corporate server, I 'm afraid they won't give you access to those information without using a authenticated client.
From your C# program, if the SmtpClient.Send() method returns true, you can assume the mail has been delivered to the SMTP server. If in case, the delivary fails, you should receive a mail to the outbound mail ID's inbox. If you want to make outbound mails appear in your outbox, you should configure IMAP/POP3 configurations accordingly.
There is no API or DLL available in exact form you want, as far as I know. You can try some other way like tracking a hash or embedded image in the mail-body from your server. But these are not reliable way as most mordern Messaging services have counter-measures for this.
We have a website sending mail alerts to end users. The site has been developed in c# ASP.NET.
I want to find the best way to send the email alerts to my users. Making sure the mail is not trapped in any spam filters. I read on the internet it is best to sent the mail directly from the web server and not route via an SMTP mail service such as google apps or Postini.
Can anyone tell me if this is correct?
First of all
Making sure the mail is not trapped in
any spam filters
Is not possible - otherwise spammers would do this. You just have to make sure you're domain isn't associated with any spamming activities and watch for keywords within the email.
I read on the internet it is best to
sent the mail directly from the web
server and not route via an SMTP mail
service such as google apps or
Postini.
This point doesn't make sense - your e-mail will never be delivered if it doesn't get routed via an SMTP server, the average message will pass through multiple on its route to the recipient.
The answer is to not actually send email and let someone else deal with the problem. I'd look at postmark or Amazon's simple email service.
We had problems that mails sent with local server often get trapped in spam filters until we implemented SPF on our mail server.
http://en.wikipedia.org/wiki/Sender_Policy_Framework
But I am not admin, that's just what our admin said, and after that we have no problems anymore.
btw. maybe would be better to ask on serverfault.com
I have an email application where a user can fill out a form and the info get's mail to the form admin. I have the correct server and email credentials being set and i do not get any errors when the mail is sent. The To and From addresses are the same (admin#thedomain.com) It is like the mail is somewhere in limbo. I know the email account works, because I send mail to it from outlook. Any thoughts?
update:
Regarding code, I have created an abstraction to the System.Net.Mail.SmtpClient class. I can set another server and the code works. The server that does work is within my host’s network. The server that does not work is outside of the network. Strange thing is, like I said, I can setup the account in OutLook and I can send / receive mail fine. I’ll have to check with my vendor to see if the mail is indeed getting to their server.
My guess is permissions. Can your app send an email to your address?
I believe .net's system.web.mail sends email via relay. You need to check with your email admin to determine if your IP address is allowed on the server to relay mail.
It turned out to be a DNS issue with my hosting company. I could send mail via outlook becuase I was direclty connecting to the mail servers. The MX records were screwed up. Thanks to all who looked