Develop Reference

C# examining and replacing tuple values based on other tuple

I'm starting with programming and C# and I have two tuples. One tuple is representing a list of points:
static List<(string, string, string)> PR { get; set; } = new List<(string, string, string)>()
{
("P1", "0", "0"),
("P2", "P1", "P1+Height"),
("P3", "P1+Width", "P2"),
("P4", "P3", "P3+Height")
};
where Item1 in the list of tuples stands for a Point name (P1, P2, P3, P4) and Item2 and Item3 represent a parametric formula for respectively the x- and y-value of a point.
"P1" in the second item in the above list should look for the tuple starting with "P1", and then for the second item in that tuple, in this case, 0.
I have a second list of tuples that represent the parameters that I need to calculate the above point values.
static List<(string, double)> PAR { get; set; } = new List<(string, double)>()
{
("Height", 500),
("Width", 1000)
};
Say I want to calculate the value of the parametric formula "P3+Height" as follows:
P3+Height --> P2 (+Height) --> P1+Height (+Height) --> 0 (+Height (+Height) --> 0 + Height + Height;
In the end I want to replace the parameter strings with the actual values (0 + 500 + 500 -> P3+Height = 1000) but thats of later concern.
Question: I'm trying to make a function that recursively evaluates the list of tuples and keeps the parameter names, but also looks for the corresponding tuple until we reach an end or exit situation. This is where I'm at now but I have a hard time getting my thought process in actual working code:
static void Main(string[] args)
{
//inputString = "P3+Height"
string inputString = PR[3].Item3;
string[] returnedString = GetParameterString(inputString);
#region READLINE
Console.ReadLine();
#endregion
}
private static string[] GetParameterString(string inputString)
{
string[] stringToEvaluate = SplitInputString(inputString);
for (int i = 0; i < stringToEvaluate.Length; i++)
{
//--EXIT CONDITION
if (stringToEvaluate[0] == "P1")
{
stringToEvaluate[i] = "0";
}
else
{
if (i % 2 == 0)
{
//Check if parameters[i] is point string
var value = PAR.Find(p => p.Item1.Equals(stringToEvaluate[i]));
//Check if parameters[i] is double string
if (double.TryParse(stringToEvaluate[i], out double result))
{
stringToEvaluate[i] = result.ToString();
}
else if (value == default)
{
//We have a point identifier
var relatingPR = PR.Find(val => val.Item1.Equals(stringToEvaluate[i])).Item2;
//stringToEvaluate[i] = PR.Find(val => val.Item1.Equals(pointId)).Item2;
stringToEvaluate = SearchParameterString(relatingPR);
}
else
{
//We have a parameter identifier
stringToEvaluate[i] = value.Item2.ToString();
}
}
}
}
return stringToEvaluate;
}
private static string[] SplitInputString(string inputString)
{
string[] splittedString;
splittedString = Regex.Split(inputString, Delimiters);
return splittedString;
}
Can anyone point me in the right direction of how this could be done with either recursion or some other, better, easier way?
In the end, I need to get a list of tuples like this:
("P1", "0", "0"),
("P2", "0", "500"),
("P3", "1000", "500"),
("P4", "1000", "1000")
Thanks in advance!

I wrote something that does this - I changed a bit of the structure to simplify the code and runtime, but it still returns the tuple you expect:
// first I used dictionaries so we can search for the corresponding value efftiantly:
static Dictionary<string, (string width, string height)> PR { get; set; } =
new Dictionary<string, (string width, string height)>()
{
{ "P1", ("0", "0") },
{ "P2", ("P1", "P1+Height")},
{ "P3", ("P1+Width", "P2") },
{ "P4", ("P3", "P3+Height") }
};
static Dictionary<string, double> PAR { get; set; } = new Dictionary<string, double>()
{
{ "Height", 500 },
{ "Width", 1000 }
};
static void Main(string[] args)
{
// we want to "translate" each of the values height and width values
List<(string, string, string)> res = new List<(string, string, string)>();
foreach (var curr in PR)
{
// To keep the code generic we want the same code to run for height and width-
// but for functionality reasons we need to know which it is - so sent it as a parameter.
res.Add((curr.Key,
GetParameterVal(curr.Value.width, false).ToString(),
GetParameterVal(curr.Value.height, true).ToString()));
}
#region READLINE
Console.ReadLine();
#endregion
}
private static double GetParameterVal(string inputString, bool isHeight)
{
// for now the only delimiter is + - adapt this and the code when \ as needed
// this will split string with the delimiter ("+height", "-500", etc..)
string[] delimiters = new string[] { "\\+", "\\-" };
string[] stringToEvaluate =
Regex.Split(inputString, string.Format("(?=[{0}])", string.Join("", delimiters)));
// now we want to sum up each "part" of the string
var sum = stringToEvaluate.Select(x =>
{
double result;
int factor = 1;
// this will split from the delimiter, we will use it as a factor,
// ["+", "height"], ["-", "500"] etc..
string[] splitFromDelimiter=
Regex.Split(x, string.Format("(?<=[{0}])", string.Join("|", delimiters)));
if (splitFromDelimiter.Length > 1) {
factor = int.Parse(string.Format($"{splitFromDelimiter[0]}1"));
x = splitFromDelimiter[1];
}
if (PR.ContainsKey(x))
{
// if we need to continue recursively translate
result = GetParameterVal(isHeight ? PR[x].height : PR[x].width, isHeight);
}
else if (PAR.ContainsKey(x))
{
// exit condition
result = PAR[x];
}
else
{
// just in case we didnt find something - we should get here
result = 0;
}
return factor * result;
}).Sum();
return sum;
}
}
}
I didnt add any validity checks, and if a value wasn't found it recieves a val of 0, but go ahead and adapt it to your needs..

Here a a working example for your question... It took me a lot of time so I hope you appreciate it: The whole code is comented line by line. If you have any question do not hesitate to ask me !
First of all we create a class named myEntry that will represent an entry. The name has to be unique e.g P1, P2, P3
public class myEntry
{
public string Name { get; private set; } //this field should be unique
public object Height { get; set; } //Can contain a reference to another entry or a value also as many combinations of those as you want.
// They have to be separated with a +
public object Width { get; set; } //same as for height here
public myEntry(string name, object height, object width)
{
//Set values
this.Name = name;
this.Height = height;
this.Width = width;
}
}
Now I create a dummy Exception class for an exception in a further class (you will see the use of this further on. Just ignore it for now)
public class UnknownEntry : Exception
{
//Create a new Class that represents an exception
}
Now we create the important class that will handle the entries and do all the work for us. This might look complicated but if you don't want to spend time understanding it you can just copy paste it, its a working solution!
public class EntryHolder
{
private Dictionary<string, double> _par = new Dictionary<string, double>(); //Dictionary holding our known variables
private List<myEntry> _entries; //List holding our entries
public EntryHolder()
{
_entries = new List<myEntry>(); //Create list
//Populate dictionary
_par.Add("Height", 500);
_par.Add("Width", 1000);
}
public bool Add(myEntry entry)
{
var otherEntry = _entries.FirstOrDefault(x => x.Name.Equals(entry.Name)); //Get entry with same name
if(otherEntry != null)
{
//Entry with the same name as another entry
//throw new DuplicateNameException(); //Throw an exception if you want
return false; //or just return false
}
//Entry to add is valid
_entries.Add(entry); //Add entry
return true; //return success
}
public void Add(List<myEntry> entries)
{
foreach (var entry in entries) //Loop through entries
{
Add(entry);
}
}
public myEntry GetEntry(string uniqueName)
{
var entry = GetRawEntry(uniqueName); //Get raw entry
var heightToCalculate = entry.Height.ToString(); //Height to calculate to string
var widthToCalculate = entry.Width.ToString(); //Width to calculate to string
entry.Height = Calculate(heightToCalculate, true); //Calculate height
entry.Width = Calculate(widthToCalculate, false); //Calculate width
return entry; //return entry
}
public List<myEntry> CalculateAllEntries()
{
List<myEntry> toReturn = new List<myEntry>(); //Create list that we will return after the calculation finished
foreach (var entryToCalculate in _entries) //Loop through all entries
{
toReturn.Add(GetEntry(entryToCalculate.Name)); //calculate entry values and add them to the list we will return after
}
return toReturn; //return list after the whole calculation finished
}
private double Calculate(string toCalculate, bool isHeight)
{
if (!toCalculate.Contains("+"))
{
//String doesn't contain a + that means it has to be a number or a key in our dictionary
object toConvert = toCalculate; //Set the object we want to convert to double
var entryCorrespondingToThisValue = _entries.FirstOrDefault(x => x.Name.Equals(toCalculate)); //Check if the string is a reference to another entry
if (entryCorrespondingToThisValue != null)
{
//It is the name of another object
toConvert = isHeight ? entryCorrespondingToThisValue.Height : entryCorrespondingToThisValue.Width; //Set object to convert to the height or width of the object in entries
}
try
{
return Convert.ToDouble(toConvert); //try to convert and return if success
}
catch (Exception e)
{
//the given height object has the wrong format
//Format: (x + Y + z ...)
throw new FormatException();
}
}
//Contains some +
var spitedString = toCalculate.Split(new char[] {'+'}); //Split
double sum = 0d; //Whole sum
foreach (var splited in spitedString) //Loop through all elements
{
double toAdd = 0; //To add default = 0
if (_par.ContainsKey(splited)) //Check if 'splited' is a key in the dictionary
{
//part of object is in the par dictionary so we get the value of it
toAdd = _par[splited]; //get value corresponding to key in dictionary
}
else
{
//'splited' is not a key in the dictionary
object toConvert = splited; //set object to convert
var entryCorrespondingToThisValue = _entries.FirstOrDefault(x => x.Name.Equals(splited)); //Does entries contain a reference to this value
if (entryCorrespondingToThisValue != null)
{
//It is a reference
toConvert = isHeight ? entryCorrespondingToThisValue.Height : entryCorrespondingToThisValue.Width; //Set to convert to references height or width
}
try
{
toAdd = Convert.ToDouble(toConvert); //Try to convert object
}
catch (Exception e)
{
//A part of the given height is not a number or is known in the par dictionary
throw new FormatException();
}
}
sum += toAdd; //Add after one iteration
}
return sum; //return whole sum
}
public myEntry GetRawEntry(string uniqueName)
{
var rawEntry = _entries.FirstOrDefault(x => x.Name.Equals(uniqueName)); //Check for entry in entries by name (unique)
if (rawEntry == null)
{
//Entry is not in the list holding all entries
throw new UnknownEntry(); //throw an exception
return null; //Or just return null
}
return rawEntry; //return entry
}
}
And here the end, the test and prove that it works:
public void TestIt()
{
List<myEntry> entries = new List<myEntry>()
{
new myEntry("P1", 0, 0),
new myEntry("P2", "P1", "P1+Height"),
new myEntry("P3", "P1+Height", "P2"),
new myEntry("P4", "P3", "P3+Height"),
};
EntryHolder myEntryHolder = new EntryHolder();
myEntryHolder.Add(entries);
var calculatedEntries = myEntryHolder.CalculateAllEntries();
}
Here an image of how it looks like:

select randomly from string array without repetitions

Good day I have some problem regarding selecting a random string from my string array I am currently developing a guessing word game.
this is my string array:
string[] movie = {"deadpool", "batmanvssuperman", "findingdory", "titanic", "suicidesquad", "lordoftherings", "harrypotter", "jurassicpark", "hungergames", "despicableme" };
while this is the process in selecting a random string to my array, what should i do next, because I want to select the string not repeated.
e.g
when the program starts it will select a string then when i select random string again i want to not select the previous word that i've already selected previously.
string word = movie[r.Next(0, movie.Length)].ToUpper();
Thank you for response! Have a nice day.

Well, simply convert your array to list and shuffle it in random order :
var rand = new Random();
string[] movies = { "deadpool", "batmanvssuperman", "findingdory", "titanic", "suicidesquad", "lordoftherings", "harrypotter", "jurassicpark", "hungergames", "despicableme" };
List<string> randomMovies = movies.ToList();
for (int i = 0; i < movies.Length / 2; i++)
{
var randNum = rand.Next(i, randomMovies.Count);
var temp = randomMovies[randNum];
randomMovies[randNum] = randomMovies[i];
randomMovies[i] = temp;
}
Then you can just take random elements by :
var randomMovie = randomMovies.First();
randomMovies.Remove(randomMovie); // either remove it or use loop to iterate through the list
I sort of like to use Queue collection here :
var moviesQueue = new Queue<string>(randomMovies);
while (moviewQueue.Count > 0)
{
Console.WriteLine(moviewQueue.Dequeue());
}
P.S.
As suggested you don't really need to delete elements from randomMovie, you can save last used index in some field and use it later;
var lastIndex = 0;
var randomMovie = randomMovies[lastIndex++];

Just loop if it's been selected. This is untested code:
private string _last;
private string GetNonRepeatedMovie()
{
string selected = "";
do
{
selected = movie[r.Next(0, movie.Length)].ToUpper();
}
while (selected == this._last);
this._last = selected;
return selected;
}
This should work to select the initial string as well when the application starts.

If you need to keep a memory, convert your list to be a class that contains the name and a field of whether it has been chosen or not.
If you go through all of them, turn this semiphor off and begin again.
class GuessingName
{
public GuessingName(string name){Name = name;}
public string Name;
public bool chosen;
}
class RandomNamePicker{
private List<GuessingName> names;
public RandomNamePicker(){
names = new List<GuessingName>();
names.Add(new GuessingName("movie"));
}
string RandomPicker(){
if(names.All(c=>c.chosen))
names.ForEach(c=>c.chosen=false);
int r1 = r.Next(0, names.Length);
while(names[r1].chosen){
r1= r.Next(0,names.Length);
}
return names[r1].Name;
}
}

Access own class properties during creation

When initially creating a new class record, how can you access its own properties?
Below is my example structure which I am wanting to set Total as the sum of No1 and No2
class ROWDATA
{
public int No1;
public int No2;
public int Total;
}
ROWDATA RowData = new ROWDATA
{
No1 = reader.GetInt32(reader.GetOrdinal("fuel_tank_no_1")),
No2 = reader.GetInt32(reader.GetOrdinal("fuel_tank_no_2")),
Total = No1 + No2 // this does not work
};
I get an error stating that The name 'No1' does not exist in the current context

You can update the Total property like this:
public int Total { get { return No1 + No2; } }
You can use this also:
var RowDataNo1 = reader.GetInt32(reader.GetOrdinal("fuel_tank_no_1"));
var RowDataNo2 = reader.GetInt32(reader.GetOrdinal("fuel_tank_no_2"));
ROWDATA RowData = new ROWDATA
{
No1 = RowDataNo1,
No2 = RowDataNo2,
Total = RowDataNo1 + RowDataNo2
};

You are using object initialiser syntax and in there you do not have access to read properties. You can either use the two values you've already read or change the property.
Using the values
ROWDATA RowData = new ROWDATA
{
No1 = reader.GetInt32(reader.GetOrdinal("fuel_tank_no_1")),
No2 = reader.GetInt32(reader.GetOrdinal("fuel_tank_no_2")),
Total = reader.GetInt32(reader.GetOrdinal("fuel_tank_no_1")) +
reader.GetInt32(reader.GetOrdinal("fuel_tank_no_2"))
};
In this case it would probably be preferable to store the values in variables and use them rather than repeated access to the reader object.
Change Total Property
The preferred option is to change your Total property to something like this:
public int Total
{
get { return No1 + No2; }
}

As stated by DavidG, you do not have access to get property accessors when using object initialiser syntax.
The C# specification1 specifically states
It is not possible for an object or collection initializer to refer to the object instance being initialized.
1 Specifically, C# 3.0 spec, section 26.4 Object and Collection Initializers

List sorting by multiple parameters

I have a .csv with the following headers and an example line from the file.
AgentID,Profile,Avatar,In_Time,Out_Time,In_Location,Out_Location,Target_Speed(m/s),Distance_Traveled(m),Congested_Duration(s),Total_Duration(s),LOS_A_Duration(s),LOS_B_Duration(s),LOS_C_Duration(s),LOS_D_Duration(s),LOS_E_Duration(s),LOS_F_Duration(s)
2177,DefaultProfile,DarkGreen_LowPoly,08:00:00,08:00:53,East12SubwayportalActor,EWConcourseportalActor,1.39653,60.2243,5.4,52.8,26.4,23,3.4,0,0,0
I need to sort this .csv by the 4th column (In_time) by increasing time ( 08:00:00, 08:00:01) and the 6th (In_Location) by alphabetical direction (e.g. East, North, etc).
So far my code looks like this:
List<string> list = new List<string>();
using (StreamReader reader = new StreamReader("JourneyTimes.csv"))
{
string line;
while ((line = reader.ReadLine()) != null)
{
line.Split(',');
list.Add(line);
}
I read in the .csv and split it using a comma (there are no other commas so this is not a concern). I then add each line to a list. My issue is how do I sort the list on two parameters and by the headers of the .csv.
I have been looking all day at this, I am relatively new to programming, this is my first program so I apologize for my lack of knowledge.

You can use LINQ OrderBy/ThenBy:
e.g.
listOfObjects.OrderBy (c => c.LastName).ThenBy (c => c.FirstName)
But first off, you should map your CSV line to some object.
To map CSV line to object you can predefine some type or create it dynamically
from line in File.ReadLines(fileName).Skip(1) //header
let columns = line.Split(',') //really basic CSV parsing, consider removing empty entries and supporting quotes
select new
{
AgentID = columns[0],
Profile = int.Parse(columns[1]),
Avatar = float.Parse(columns[2])
//other properties
}
And be aware that like many other LINQ methods, these two use deferred execution

You are dealing with two distinct problems.
First, ordering two columns in C# can be achieved with OrderBy, ThenBy
public class SpreadsheetExample
{
public DateTime InTime { get; set; }
public string InLocation { get; set; }
public SpreadsheetExample(DateTime inTime, string inLocation)
{
InTime = inTime;
InLocation = inLocation;
}
public static List<SpreadsheetExample> LoadMockData()
{
int maxMock = 10;
Random random = new Random();
var result = new List<SpreadsheetExample>();
for (int mockCount = 0; mockCount < maxMock; mockCount++)
{
var genNumber = random.Next(1, maxMock);
var genDate = DateTime.Now.AddDays(genNumber);
result.Add(new SpreadsheetExample(genDate, "Location" + mockCount));
}
return result;
}
}
internal class Class1
{
private static void Main()
{
var mockData = SpreadsheetExample.LoadMockData();
var orderedResult = mockData.OrderBy(m => m.InTime).ThenBy(m => m.InLocation);//Order, ThenBy can be used to perform ordering of two columns
foreach (var item in orderedResult)
{
Console.WriteLine("{0} : {1}", item.InTime, item.InLocation);
}
}
}
Now you can tackle the second issue of moving data into a class from Excel. VSTO is what you are looking for. There are lots of examples online. Follow the example I posted above. Replace your custom class in place of SpreadSheetExample.

You may use a DataTable:
var lines = File.ReadAllLines("test.csv");
DataTable dt = new DataTable();
var columNames = lines[0].Split(new char[] { ',' });
for (int i = 0; i < columNames.Length; i++)
{
dt.Columns.Add(columNames[i]);
}
for (int i = 1; i < lines.Length; i++)
{
dt.Rows.Add(lines[i].Split(new char[] { ',' }));
}
var rows = dt.Rows.Cast<DataRow>();
var result = rows.OrderBy(i => i["In_time"])
.ThenBy(i => i["In_Location"]);
// sum
var sum = rows.Sum(i => Int32.Parse(i["AgentID"].ToString()));

dynamic flexibility in C#

I have recently started learning programming and chose .NET with Visual Studio Express. I am trying to write a CSV Parser as a learning experience and it's giving me a lot more trouble than I expected. I am starting with the reader. One thing I am doing differently in my parser is that I am not using quotes. I am escaping commas with a backslash, backslashes with a backslash, and line breaks with a backslash. For example, if a comma is preceded by an even number of backslashes it is a field and I halve any blocks of backslashes. If it's odd, it's not end of field and I still halve blocks of backslashes. I'm not sure how robust this will be if I can ever get it working, except I'm only learning at this point and I'm looking at it mostly as an exercise in manipulating data structures.
I have a question in reference to the code snippet at the bottom of this post and how to make it not so static and limiting and still compile and run for me.
The line of code that reads:
var contents = (String)fileContents;
I keep trying to make it more dynamic to increase flexibility and make it something like this:
var contents = (otherVariableThatCouldChangeTypeAtRuntime.GetType())fileContents;
Is there something I can do to get it to do this and still compile? Maybe something like Option Infer from VB.NET might help, except I can't find that.
Also, I have written this in VB.NET as well. It seems to me that VB.NET allows me a considerably more dynamic style than what I've posted below, such as not having to type var over and over again and not having to keep casting my index counting variable into an integer over and over again if I shut off Option Strict and Option Explicit as well as turn on Option Infer. For example, C# won't let me type something analogous to the following VB.NET code even though I know the methods and properties I will be calling at run-time will be there at run-time.
Dim contents As Object = returnObjectICantDetermineAtComplieTime()
contents.MethodIKnowWillBeThereAtRunTime()
Can I do these things in C#? Anyways, here's the code and thanks in advance for any responses.
public class Widget
{
public object ID { get; set; }
public object PartNumber { get; set; }
public object VendorID { get; set; }
public object TypeID { get; set; }
public object KeyMarkLoc { get; set; }
public Widget() { }
}
public object ReadFromFile(object source)
{
var fileContents = new FileService().GetFileContents(source);
object records = null;
if (fileContents == null)
return null;
var stringBuffer = "";
var contents = (String)fileContents;
while (contents.Length > 0 && contents != "\r\n")
{
for (object i = 0; (int)i < contents.Length; i=(int)i+1 )
{
object character = contents[(int)i];
if (!stringBuffer.EndsWith("\r\n"))
{
stringBuffer += character.ToString();
}
if (stringBuffer.EndsWith("\r\n"))
{
var bSlashes = getBackSlashes(stringBuffer.Substring(0, stringBuffer.Length - 4));
stringBuffer = stringBuffer.Substring(0, stringBuffer.Length - 4);
if ((int)bSlashes % 2 == 0)
{
break;
}
}
}
contents = contents.Substring(stringBuffer.Length+2);
records = records == null ? getIncrementedList(new List<object>(), getNextObject(getFields(stringBuffer))) : getIncrementedList((List<object>)records, getNextObject(getFields(stringBuffer)));
}
return records;
}
private Widget getNextRecord(object[] fields)
{
var personStudent = new Widget();
personStudent.ID = fields[0];
personStudent.PartNumber = fields[1];
personStudent.VendorID = fields[2];
personStudent.TypeID = fields[3];
personStudent.GridPath = fields[4];
return personStudent;
}
private object[] getFields(object buffer)
{
var fields = new object[5];
var intFieldCount = 0;
var fieldVal = "";
var blocks = buffer.ToString().Split(',');
foreach (var block in blocks)
{
var bSlashes = getBackSlashes(block);
var intRemoveCount = (int)bSlashes / 2;
if ((int)bSlashes % 2 == 0) // Delimiter
{
fieldVal += block.Substring(0, block.Length - intRemoveCount);
fields[intFieldCount] += fieldVal;
intFieldCount++;
fieldVal = "";
}
else // Part of Field
{
fieldVal += block.Substring(0, block.Length - intRemoveCount - 1) + ",";
}
}
return fields;
}
private object getBackSlashes(object block)
{
object bSlashes = block.ToString().Length == 0 ? new int?(0) : null;
for (object i = block.ToString().Length - 1; (int)i>-1; i=(int)i-1)
{
if (block.ToString()[(int)i] != '\\') return bSlashes = bSlashes == null ? 0 : bSlashes;
bSlashes = bSlashes == null ? 1 : (int)bSlashes + 1;
}
return bSlashes;
}
}
Here is the web service code.
[WebMethod]
public object GetFileContents(object source)
{
return File.ReadAllText(source.ToString());
}

Dim contents As Object = returnObjectICantDetermineAtComplieTime()
contents.MethodIKnowWillBeThereAtRunTime()
You can do this with the dynamic type.
See for more information: http://msdn.microsoft.com/en-us/library/dd264736.aspx