I am really struggling with Regular Expressions and can't seem to extract the number from this string
"id":143331539043251,
I've tried with this ... but I'm getting compilation errors
var regex = new Regex(#""id:"\d+,");
Note that the full string contains other numbers I don't want. I want numbers between id: and the ending ,
Try this code:
var match = Regex.Match(input, #"\""id\"":(?<num>\d+)");
var yourNumber = match.Groups["num"].Value;
Then use extracted number yourNumber as a string or parse it to number type.
If all you need is the digits, just match on that:
[0-9]+
Note that I am not using \d as that would match on any digit (such as Arabic numerals) in the .NET regex engine.
Update, following comments on the question and on this answer - the following regex will match the pattern and place the matched numbers in a capturing group:
#"""id"":([0-9]+),"
Used as:
Regex.Match(#"""id"":143331539043251,", #"""id"":([0-9]+),").Groups[1].Value
Which returns 143331539043251.
If you are open to using LINQ try the following (c#):
string stringVariable = "123cccccbb---556876---==";
var f = (from a in stringVariable.ToCharArray() where Char.IsDigit(a) == true select a);
var number = String.Join("", f);
Related
Using C#, i am stuck while trying to extract a specific string while limiting the string to be matched. Here is my input string:
NPS_CNTY01_10112018_Adult_Submittal.txt
I would like to extract 01 after CNTY and ingnore anything after 01.
So far i have the regex to be:
(?!NPS_CNTY)\d{2}
But the above regex gets many other digit matches from the input string. One approach i was thinking was to limit the input to 9 characters to eventually get 01. But somehow not able to achieve that. Any help is appreciated.
I would like to add that the only variable data in this input string is:
NPS_CNTY[two digit county code excluding this bracket]_[date in MMDDYYYY format excluding the brackets]_Adult_Submittal.txt.
Also please limit solutions to regex's.
The (?!NPS_CNTY)\d{2} pattern matches a location that is not immediately followed with NPS_CNTY and then matches 2 digits. The lookahead always returns true since two digits cannot start a NPS_CNTY char sequence, it is redundant.
You may use a positive lookbehind like this to get 01:
var m = Regex.Match(s, #"(?<=NPS_CNTY)\d+");
var result = "";
if (m.Success)
{
result = m.Value;
}
See the .NET regex demo
Here, (?<=NPS_CNTY), a positive lookbehind, matches a location that is immediately preceded with NPS_CNTY and then \d+ matches 1 or more digits.
An equivalent solution using capturing mechanism is
var m = Regex.Match(s, #"NPS_CNTY(\d+)");
var result = "";
if (m.Success)
{
result = m.Groups[1].Value;
}
If the string always start with NPS_CNTY and you have to extract 2 digits then you don't need a regular expression. Just use Substring() method:
string text = #"NPS_CNTY01_01141980_Adult_Submittal.txt";
string digits = text.Substring(8, 2);
EDIT:
In case you need to match N digits after NPS_CNTY you can use the following code:
string text = #"NPS_CNTY012_01141980_Adult_Submittal.txt";
string digits = text.Replace("NPS_CNTY", string.Empty)
.Split("_", StringSplitOptions.RemoveEmptyEntries)
.FirstOrDefault();
My task is extract the first digits in the following string:
GLB=VSCA|34|speed|1|
My pattern is the following:
(?x:VSCA(\|){1}(\d.))
Basically I need to extract "34", the first digits occurrence after the "VSCA". With my pattern I obtain a group but would be possibile to get only the number? this is my c# snippet:
string regex = #"(?x:VSCA(\|){1}(\d.))";
Regex rx = new Regex(regex);
string s = "GLB=VSCA|34|speed|1|";
if (rx.Match(s).Success)
{
var test = rx.Match(s).Groups[1].ToString();
}
You could match 34 (the first digits after VSCA) using a positive lookbehind (?<=VSCA\D*) to assert that what is on the left side is VSCA followed by zero or times not a digit \D* and then match one or more digits \d+:
(?<=VSCA\D*)\d+
If you need the pipe to be after VSCA the you could include that in the lookbehind:
(?<=VSCA\|)\d+
Demo
This regex pattern: (?<=VSCA\|)\d+?(?=\|) will match only the number. (If your number can be negative / have decimal places you may want to use (?<=VSCA\|).+?(?=\|) instead)
You don't need Regex for this, you can simply split on the '|' character:
string s = "GLB=VSCA|34|speed|1|";
string[] parts = s.Split('|');
if(parts.Length >= 2)
{
Console.WriteLine(parts[1]); //prints 34
}
The benefit here is that you can access all parts of the original string based on the index:
[0] - "GLB=VSCA"
[1] - "34"
[2] - "speed"
[3] - "1"
Fiddle here
While the other answers work really well, if you really must use a regular expression, or are interested in knowing how to get to that straight away you can use a named group for the number. Consider the following code:
string regex = #"(?x:VSCA(\|){1}(?<number>\d.?))";
Regex rx = new Regex(regex);
string s = "GLB:VSCA|34|speed|1|";
var match = rx.Match(s);
if(match.Success) Console.WriteLine(match.Groups["number"]);
How about (?<=VSCA\|)[0-9]+?
Try it out here
I have a long string with random letters, numbers, and spaces.
I need a regex expression to pull out the part of the string after the sequence of characters and numbers --> AQ102.
For example :
string t = "kjdsjsk158dfdd 125.196.168.210helloAQ102Lab101 section2";
desired output:
Lab101 section2
Why not use
string s = t.Split("AQ102").Last();
Or, a regular expression as originally asked for:
Regex regEx = new Regex(#".*(AQ102.*)");
OR
Regex regEx = new Regex(#".*(AQ102)(.*)");
And you can get the matches doing the following:
Matches matches = regEx.Matches(t);
And you can get the match by referencing the first index:
matches[1]
OR, if you're really confident:
string val = regEx.Matches(t)[1].Value;
Don't need Regex for this. A simple split should suffice:
string output = input.Split(new string[] { "AQ102" }, StringSplitOptions.None)[1];
Depend on how sure you are of your input, you may want to check that AQ102 exist first, or even to count how many times... but as I said, depends on your scenario.
I need for text like "joe ($3,004.50)" to be filtered down to 3004.50 but am terrible at regex and can't find a suitable solution. So only numbers and periods should stay - everything else filtered. I use C# and VS.net 2008 framework 3.5
This should do it:
string s = "joe ($3,004.50)";
s = Regex.Replace(s, "[^0-9.]", "");
The regex is:
[^0-9.]
You can cache the regex:
Regex not_num_period = new Regex("[^0-9.]")
then use:
string result = not_num_period.Replace("joe ($3,004.50)", "");
However, you should keep in mind that some cultures have different conventions for writing monetary amounts, such as: 3.004,50.
You are dealing with a string - string is an IEumerable<char>, so you can use LINQ:
var input = "joe ($3,004.50)";
var result = String.Join("", input.Where(c => Char.IsDigit(c) || c == '.'));
Console.WriteLine(result); // 3004.50
For the accepted answer, MatthewGunn raises a valid point in that all digits, commas, and periods in the entire string will be condensed together. This will avoid that:
string s = "joe.smith ($3,004.50)";
Regex r = new Regex(#"(?:^|[^w.,])(\d[\d,.]+)(?=\W|$)/)");
Match m = r.match(s);
string v = null;
if (m.Success) {
v = m.Groups[1].Value;
v = Regex.Replace(v, ",", "");
}
The approach of removing offending characters is potentially problematic. What if there's another . in the string somewhere? It won't be removed, though it should!
Removing non-digits or periods, the string joe.smith ($3,004.50) would transform into the unparseable .3004.50.
Imho, it is better to match a specific pattern, and extract it using a group. Something simple would be to find all contiguous commas, digits, and periods with regexp:
[\d,\.]+
Sample test run:
Pattern understood as:
[\d,\.]+
Enter string to check if matches pattern
> a2.3 fjdfadfj34 34j3424 2,300 adsfa
Group 0 match: "2.3"
Group 0 match: "34"
Group 0 match: "34"
Group 0 match: "3424"
Group 0 match: "2,300"
Then for each match, remove all commas and send that to the parser. To handle case of something like 12.323.344, you could do another check to see that a matching substring has at most one ..
I have a little problem on RegEx pattern in c#. Here's the rule below:
input: 1234567
expected output: 123/1234567
Rules:
Get the first three digit in the input. //123
Add /
Append the the original input. //123/1234567
The expected output should looks like this: 123/1234567
here's my regex pattern:
regex rx = new regex(#"((\w{1,3})(\w{1,7}))");
but the output is incorrect. 123/4567
I think this is what you're looking for:
string s = #"1234567";
s = Regex.Replace(s, #"(\w{3})(\w+)", #"$1/$1$2");
Instead of trying to match part of the string, then match the whole string, just match the whole thing in two capture groups and reuse the first one.
It's not clear why you need a RegEx for this. Why not just do:
string x = "1234567";
string result = x.Substring(0, 3) + "/" + x;
Another option is:
string s = Regex.Replace("1234567", #"^\w{3}", "$&/$&"););
That would capture 123 and replace it to 123/123, leaving the tail of 4567.
^\w{3} - Matches the first 3 characters.
$& - replace with the whole match.
You could also do #"^(\w{3})", "$1/$1" if you are more comfortable with it; it is better known.
Use positive look-ahead assertions, as they don't 'consume' characters in the current input stream, while still capturing input into groups:
Regex rx = new Regex(#"(?'group1'?=\w{1,3})(?'group2'?=\w{1,7})");
group1 should be 123, group2 should be 1234567.