I have a asp.net web application that I am trying to deploy to IIS on Windows Server 2016. I first ran the application on Visual Studio 2017 and it loads and runs perfectly fine but on IIS when I run it on localhost it loads up but with the code headers on it and no functionality.
There are no errors thrown from the browser perspective or event logs so I don't know how to troubleshoot specifically. Most of the research I have done on this issue points to not having HTTP activation feature enabled but I have installed everything and still this issue has not been resolved. Most of the suggestions and answers I have tried were for the old IIS 7.5 or 8 not IIS 10.0 which I am using. The application runs fine on visual studio so I'm guessing that it is not a problem with the code but with my IIS configuration. I'm hoping someone can help me or at least point me in the right direction. This is my first question ever so I'm not sure what else is needed (i.e code, specifics) for me to get a proper answer. I will provide what is needed. Thank you
Thanks for your comments guys. After searching for solutions using the framing of the question as "IIS not serving ASPX files" I found a solution which worked which was to go IIS -> select your website -> go to handler mapping and then press revert to parent option. Apparently my handler mapping for the website were incorrect or not configured properly but everything works now. Thanks for your help.
I have a project that for some reason isn't loading the project, but just is showing me the directory listings. I have even tried running it in local IIS to see if it makes a difference and it doesn't
Things I have tried
modules runAllManagedModulesForAllRequests="true"
remove and reinstall IIS from manage windows applications in control panel
If I create a template MVC project in visual studio and run it , it runs fine so that makes me think its not my configruation. Other uses with the same project and web config are having no problem getting the site to load.
Also if I try and goto /Home/Index I get a 404 error. Not sure if that helps in any way
Any other ideas I may be missing here
IIS 10 on Windows 10
Check that IIS is installed and features you require are enabled
Register Asp.Net in Windows 10 for the Framework version you use.
dism /online /enable-feature /all /featurename:IIS-ASPNET45
Remove read-only tick and grant IIS with permissions on the folder your application is deployed.
You need to go over your IIS configurations again, do re-check whether you have the “Default Document” set for your website in IIS Manager.
Also, if you’re running directly via Visual Studio, check whether you have selected the relevant “Project” as the “Startup Project” for the Solution (visit https://msdn.microsoft.com/en-us/library/a1awth7y.aspx).
If the above fail, do recheck the IIS Permission for the particular project (visit https://support.microsoft.com/en-us/help/313075/how-to-configure-web-server-permissions-for-web-content-in-iis)
Lastly as mentioned above, do un-check the "Read Only" Flag if its there.
Do share your feedback and let me know if your problem still persists.
So I am very new to web hosting. I am simply trying to host my asp website locally, but when I try browsing through IIS it just loads and never shows anything.
Here it is in the directory:
And here it is in IIS:
Then I just started the application pool and then clicked browse. Am I not doing something right?
You need to use a browser to view your website locally. Not the file explorer.
You can try localhost as url first, if that does not show your site follow the steps below.
Open the hosts file, located in C:\Windows\System32\drivers\etc
(it could be read only so you may need to change that attribute)
Add a line to this file, eg 127.0.0.1 www.medwebtest.com and save
Right click medwebtest your website in IIS left pane and select
edit bindings
Add the url www.medwebtest.com to the site as a new binding.
Reopen the browser and navigate to your new url.
So the solution I ended up going with was installing UltiDev and running my webpage from that. Honestly it felt far easier to use. I just installed it and selected my files and it worked. I was hoping that's how IIS would work but it still kept throwing errors for me.
I had a similar issue, on my new installation of windows.
turns out that I have not installed features for IIS using the following screen
Once the features have been installed, the website started working again.
To be honest, I've tried to turn a dirty trick on IIS and just when I thought that I was going to get away with it, I realized my workaround doesn't work. Here's what I've tried to do:
1) I have ASP.NET application which has Preloader class that inherits IProcessHostPreloadClient and does all the heavy initialization in Preload method implementation (application is complex and it's a part of an enormous system, so it requires approximately 2 minutes to establish connections to all necessary services and pre-instantiate some Unity registrations).
2) I have a lot of work that needs to be done on application shutdown (unsubscribing, disconnecting, disposing,...), and I guess the best place to do it is in *Application_End* method located in Global.asax.
3) Everything works just fine when I have user activity (first request after the Application Pool that contains aforementioned web application is started will cause *Application_Start* to be called and afterwards *Application_End* is called on Application Pool stop or recycle), but problems occur when there is no user activity and application tries to restart itself after being active for 48 hours (configured requirement). Since there was no requests, application officially didn't get started. Ergo, it can't be gracefully stopped since *Application_End* won't be called.
4) Now comes the messy part... I've tried to make a GET request from code at the end of the Preload method, and it worked. But this solution seemed bad to me, even though it worked. So, I've tried a lot of things, and the last thing I tried was this:
SimpleWorkerRequest swr = new SimpleWorkerRequest(string.Empty, string.Empty, tw);
HttpRuntime.ProcessRequest(swr);
... and that has done it's purpose. *Application_Start* was called, (I've checked response, it was containing login page that was supposed to be displayed in initial request) and on Application Pool shutdown application ended gracefully by doing necessary work in *Application_End*.
BUT
After the application was started (preloaded and initiated) in this manner, this is what happened when I wanted to reach application via Web browser:
HTTP Error 500.21 - Internal Server Error
Handler "ExtensionlessUrlHandler-Integrated-4.0" has a bad module "ManagedPipelineHandler" in its module list
I am unable to figure this out. Can anybody tell me why this happens and how to fix it?
If I don't figure this out, I will go back to first solution (sending GET request from code) but this problem will bug me since I don't even have an idea what's wrong.
Try to re-register ASP.NET with aspnet_regiis -i. It worked for me.
A likely path for .NET 4 (from elevated command prompt):
c:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -i
http://forums.iis.net/p/1190643/2026401.aspx
If you're running into this error with Windows 8/Windows Server 2012 and .Net 4.5 follow these instructions here:
http://www.britishdeveloper.co.uk/2013/01/handler-extensionlessurlhandler.html
Go to "turn Windows features on or off"
Then Internet Information Services
Then World Wide Web Services
Then Application Development Features
And then enable ASP.NET 4.5
This worked for me (although the wizard and wording is a little different in Windows Server 2012, but you'll figure it out). With this being said, why this is necessary after installing everything through the Web Platform Installer including all of the dependencies is completely beyond me...
Despite following most of the advice on this page, I was still getting problems on Windows Server 2012. Installing .NET Extensibility 4.5 solved it for me:
Add Roles and Features > Server Roles > Web Server (IIS) > Web Server > Application Development > .NET Extensibility 4.5
For Windows 10 / Windows Server 2016 use the following command:
dism /online /enable-feature /featurename:IIS-ASPNET45 /all
The suggested answers with aspnet_regiis doesn't work on Windows 10 (Creators Update and later) or Windows Server 2016:
C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -i
Microsoft (R) ASP.NET RegIIS version 4.0.30319.0
Administration utility to install and uninstall ASP.NET on the local machine.
Copyright (C) Microsoft Corporation. All rights reserved.
Start installing ASP.NET (4.0.30319.0).
This option is not supported on this version of the operating system. Administrators should instead install/uninstall ASP.NET 4.5 with IIS8 using the "Turn Windows Features On/Off" dialog, the Server Manager management tool, or the dism.exe command line tool. For more details please see http://go.microsoft.com/fwlink/?LinkID=216771.
Finished installing ASP.NET (4.0.30319.0).
Interestingly, the "Turn Windows Features On/Off" dialog didn't allow me to untick .NET nor ASP.NET 4.6, and only the above DISM command worked. Not sure whether the featurename is correct, but it worked for me.
Run one of these commands :
For 32 Bit Windows OS:
c:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -i
For 64 Bit Windows OS:
c:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe -I
This https://stackoverflow.com/a/13266763/1277458 works perfectly. But if you have 64-bit operation system use Framework64 instead of Framework in path:
c:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe -i
The problem
You are using SimpleWorkerRequest in a scenario that it wasn't designed for. You are using it inside of IIS. If you look at the prior MSDN link (emphasis is mine):
Provides a simple implementation of the HttpWorkerRequest abstract class that can be used to host ASP.NET applications outside an Internet Information Services (IIS) application. You can employ SimpleWorkerRequest directly or extend it.
Also, if you look at the MSDN documentation for the System.Web.Hosting namespace (SimpleWorkerRequest is in this namespace), you will also see something similar to the above (again, emphasis is mine):
The System.Web.Hosting namespace provides the functionality for hosting ASP.NET applications from managed applications outside Microsoft Internet Information Services (IIS).
The solution
I would recommend removing the call to SimpleWorkerRequest. Instead, you can use a Microsoft solution to make sure your web site automatically starts up after it recycles. What you need is the Microsoft Application Initialization Module for IIS 7.5. It is not complicated to configure, but you need to understand the exact options. This is why I would also recommend the Application Initialization UI for IIS 7.5. The UI is written by an MSDN blogger.
So what exactly does the Microsoft solution do? It does what you are trying to do - IIS sends a "get" request to your website after the application pool is started.
In my case (Windows 10 + IIS 10) i had to open "Turn Windows Features On or Off" and then go to Internet Information Services > World Wide Web Services > Application Development Features > and check ASP.NET 4.6
I solved this problem, adding in "Turn Windows features on or off"
The option ASP.NET 4.7
Making this its own post because this had me going for hours.
I saw maybe a dozen of similar posts here and elsewhere about this problema and the aspnet_regiis fix. They weren't working for me, and aspnet_regiis was acting odd, just listing options etc.
As user ryan-anderson above indicated, you cannot enter .exe
For those less comfy with things outside IIS on the server, here's what you do in simple steps.
Find aspnet_regiis in a folder similar to this path. c:\Windows\Microsoft.NET\Framework\v4.0.30319\
Right-click command prompt in the start menu or wherever and tell it to run as administrator. Using the windows "Run" feature just won't work, or didn't for me.
Go back to the aspnet_regiis executable. Click-drag it right into the command prompt or copy-paste the address into the command prompt.
Remove, if it's there, the .exe at the end. This is key. Add the -i (space minus eye) at the end. Enter.
If you did this correctly, you will see that it starts to install asp.net, and then tells you it succeeded.
Make sure that you have set your application-site version from v2.0 to v4.0 in IIS Manager:
Application Pools > Your Application > Advanced Settings > .NET Framework Version
After that, install your ASP.NET.
For 32-Bit OS (Windows):
C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -i
For 64-Bit OS (Windows):
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe -i
Restart your application-site in IIS Manager and enjoy.
I know this is an oldie, but thought I might add some value. For those of us running Server Core outside of a domain (domain members can just run Server Manager remotely to add/remove features/roles), you have to resort to command lines.
Powershell users can type "Install-WindowsFeature Web-Asp-Net45"
That should be equivalent to using server manager.
I was challenged by the same error message, with .net 4.7 installed.
The solution was to follow one earlier mentioned post to go with the "Turn Windows feature on or off", where the ".NET Framework 4.7 Advanced Services" --> "ASP.NET 4.7" already was checked.
Further down the list, there is the "Internet Information Services" and subnote "Application Development Features" --> "ASP.NET 4.7", that also needs to be checked.
When enabling this, allot of other features are enabled... I simply pressed the Ok button, and the issue was resolved.
Screendump of the windows features dialog
Installing .NET 4.7 worked for me. I only had 3.5 installed prior.
I'm working on Windows Server 2012. .NET Extensibility 4.5 feature is on. WebDAVModule removed.
I was still getting 500.21 error on ASP.NET route '/docs'.
Changing 'skipManagedModules' to false fixed the problem.
<applicationInitialization doAppInitAfterRestart="true" skipManagedModules="false">
<add initializationPage="/docs" />
</applicationInitialization>
Thanks to https://groups.google.com/forum/#!topic/bonobo-git-server/GbdMXdDO4tI
I had this problem and found that removing the following folder helped, even with the non-Express edition.Express:
C:\Users\<user>\Documents\IISExpress
This error started happening to me out of nowhere last week, affecting the existing web sites on my machine. I had no luck with it trying any of the suggestions here. Eventually I removed WebDAV from IIS completely (Windows Features -> Internet Information Services -> World Wide Web Services -> Common HTTP Features -> WebDAV Publishing). I did an IIS reset after this for good measure, and my error was finally resolved.
I can only guess that a Windows update started the issue, but I can't be sure.
You could fix it by change the "ExtensionlessUrlHandler-Integrated-4.0" type in iis to System.Web.DefaultHttpHandler
For me, removing WebDAV from my server caused the application to return a 503 Service Unavailable Error message when using PUT or DELETE, so I re-installed it back again. I also tried completely removing .NET Framework 4.5 and reinstalling it and also tried re-registering as suggested but to no avail.
I was able to fix this by disabling WebDAV for the individual application pool, this stopped the 'bad module' error when using PUT or DELETE.
Disable WebDAV for Individual App Pool:
Click the affected application pool
Find WebDAV Authoring Tools in the list
Click to open it
Click Disable WebDAV in the top right.
Ta daaaa!
I still left the remove items in my web.config file.
<system.webServer>
<modules>
<remove name="WebDAVModule"/>
</modules>
<handlers>
<remove name="WebDAV" />
</handlers>
<system.webServer>
This link is where I found the instructions but it's not very clear.
This maybe not a usefull solution for OP but it concerns the same "error" message.
We are hosting PHP pages on IIS8.5 with .NET 4.5 installed correctly.
We make use of the preload functionality to make sure our application is always responsive across the board.
After a while we started getting this error at random.
In the web.config : I put skipManagedModules to true, -> don't do this!
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<system.webServer>
<applicationInitialization skipManagedModules="false" doAppInitAfterRestart="true">
<add initializationPage="/" />
</applicationInitialization>
...
Although website is php, the routing to the paging is managed by the modules!!!
I also ran into that problem. My MVC4 App is running on a Windows Server 2012 R2 with IIS 8.5. None of these posted solutions worked for me...installing the missing frameworks through IIS Features could have solved it but the installation always failed.
I had to use the Web Platform Installer and installed the following packages:
I was facing this issue in a web application hosted on a shared hosting server. So obviously did not have direct access to IIS, so could not apply many solution proposed here.
On the hosting provider's control panel I enabled error logging for IIS and ASP.Net. And then got to know that error actually lied in a missing cshtml.