Is there a C# syntax with which I can express strings containing double quotes without having to escape them? I frequently copy and paste strings between C# source code to other apps, and it's frustrating to keep adding and removing backslashes.
Eg. presently for the following string (simple example)
"No," he said.
I write in C# "\"No,\" he said."
But I'd rather write something like Python '"No," he said.', or Ruby %q{"No," he said.}, so I can copy and paste the contents verbatim to other apps.
I frequently copy and paste strings between C# source code to other apps, and it's frustrating to keep adding and removing backslashes.
Then it sounds like you probably shouldn't have the strings within source code.
Instead, create text files which are embedded in your assembly, and load them dynamically... or create resource files so you can look up strings by key.
There's no form of string literal in C# which would allow you to express a double-quote as just a single double-quote character in source code.
You could try this but you're still effectively escaping:
string s = #"""No,"" he said.";
Update 2022: C# 11 in Visual Studio 2022 version 17.2 (or later) supports raw string literals between """ https://learn.microsoft.com/en-us/dotnet/csharp/whats-new/csharp-11#raw-string-literals
Raw string literals are a new format for string literals. Raw string literals can contain arbitrary text, including whitespace, new lines, embedded quotes, and other special characters without requiring escape sequences. A raw string literal starts with at least three double-quote (""") characters. It ends with the same number of double-quote characters. Typically, a raw string literal uses three double quotes on a single line to start the string, and three double quotes on a separate line to end the string. The newlines following the opening quote and preceding the closing quote aren't included in the final content:
Example (note that StackOverflow doesn't yet highlight correctly)
string longMessage = """
This is a long message.
It has several lines.
Some are indented
more than others.
Some should start at the first column.
Some have "quoted text" in them.
""";
Related
I'm writing a program in C# using Microsoft Visual Studio, i need the program to match the vertical bar, but when I try to escape it like this "\|" it gives me an unrecognized escape sequence error. What am I doing wrong?
In C#
string test = "\|";
Is going to fail because this is a C# string escape sequence, and no such escape exists. Because you are trying to include a backslash in the string, you need to escape the slash so the string actually contains a slash:
string test = "\\|";
What will actually be stored in this string is \|
The reason you get an unrecognized escape sequence is that backslash is used as an escape character in C# string literals as well as in regex.
You have several choices to fix this:
Use verbatim literals, i.e. #"\|", or
Use a second escape inside a regular literal, i.e. "\\|", or
Use a character class, i.e. [|]
The third one is my personal favorite, because it does not require counting backslashes.
The string is treating "\|" as an escaped pipe in C#. Try "\|" to escape the \ so that the regex actually sees the \| you want.
I've noticed that C# adds additional slashes (\) to paths. Consider the path C:\Test. When I inspect the string with this path in the text visualiser, the actual string is C:\\Test.
Why is this? It confuses me, as sometimes I may want to split the path up (using string.Split()), but have to wonder which string to use (one or two slashes).
The \\ is used because the \ is an escape character and is need to represent the a single \.
So it is saying treat the first \ as an escape character and then the second \ is taken as the actual value. If not the next character after the first \ would be parsed as an escaped character.
Here is a list of available escape characters:
\' - single quote, needed for character literals
\" - double quote, needed for string literals
\\ - backslash
\0 – Null
\a - Alert
\b - Backspace
\f - Form feed
\n - New line
\r - Carriage return
\t - Horizontal tab
\v - Vertical quote
\u - Unicode escape sequence for character
\U - Unicode escape sequence for surrogate pairs.
\x - Unicode escape sequence similar to "\u" except with variable length.
EDIT: To answer your question regarding Split, it should be no issue. Use Split as you would normally. The \\ will be treated as only the one character of \.
.Net is not adding anything to your string here. What your seeing is an effect of how the debugger chooses to display strings. C# strings can be represented in 2 forms
Verbatim Strings: Prefixed with an # sign and removes the need o escape \\ characters
Normal Strings: Standard C style strings where \\ characters need to escape themselves
The debugger will display a string literal as a normal string vs. a verbatim string. It's just an issue of display though, it doesn't affect it's underlying value.
Debugger visualizers display strings in the form in which they would appear in C# code. Since \ is used to escape characters in non-verbatum C# strings, \\ is the correct escaped form.
Okay, so the answers above are not wholly correct. As such I am adding my findings for the next person who reads this post.
You cannot split a string using any of the chars in the table above if you are reading said string(s) from an external source.
i.e,
string[] splitStrings = File.ReadAllText([path]).Split((char)7);
will not split by those chars. However internally created strings work fine.
i.e.,
string[] splitStrings = "hello\agoodbye".Split((char)7);
This may not hold true for other methods of reading text from a file. I am unsure as I have not tested with other methods. With that in mind, it is probably best not to use those chars for delimiting strings!
I've noticed that C# adds additional slashes (\) to paths. Consider the path C:\Test. When I inspect the string with this path in the text visualiser, the actual string is C:\\Test.
Why is this? It confuses me, as sometimes I may want to split the path up (using string.Split()), but have to wonder which string to use (one or two slashes).
The \\ is used because the \ is an escape character and is need to represent the a single \.
So it is saying treat the first \ as an escape character and then the second \ is taken as the actual value. If not the next character after the first \ would be parsed as an escaped character.
Here is a list of available escape characters:
\' - single quote, needed for character literals
\" - double quote, needed for string literals
\\ - backslash
\0 – Null
\a - Alert
\b - Backspace
\f - Form feed
\n - New line
\r - Carriage return
\t - Horizontal tab
\v - Vertical quote
\u - Unicode escape sequence for character
\U - Unicode escape sequence for surrogate pairs.
\x - Unicode escape sequence similar to "\u" except with variable length.
EDIT: To answer your question regarding Split, it should be no issue. Use Split as you would normally. The \\ will be treated as only the one character of \.
.Net is not adding anything to your string here. What your seeing is an effect of how the debugger chooses to display strings. C# strings can be represented in 2 forms
Verbatim Strings: Prefixed with an # sign and removes the need o escape \\ characters
Normal Strings: Standard C style strings where \\ characters need to escape themselves
The debugger will display a string literal as a normal string vs. a verbatim string. It's just an issue of display though, it doesn't affect it's underlying value.
Debugger visualizers display strings in the form in which they would appear in C# code. Since \ is used to escape characters in non-verbatum C# strings, \\ is the correct escaped form.
Okay, so the answers above are not wholly correct. As such I am adding my findings for the next person who reads this post.
You cannot split a string using any of the chars in the table above if you are reading said string(s) from an external source.
i.e,
string[] splitStrings = File.ReadAllText([path]).Split((char)7);
will not split by those chars. However internally created strings work fine.
i.e.,
string[] splitStrings = "hello\agoodbye".Split((char)7);
This may not hold true for other methods of reading text from a file. I am unsure as I have not tested with other methods. With that in mind, it is probably best not to use those chars for delimiting strings!
I am reading a text file with this structure:
20150218;"C7";"B895";00101;"FTBCCAL16"
I read the line and split like this:
System.IO.StreamReader fichero = new System.IO.StreamReader(ruta, Encoding.Default);
while ((linea = fichero.ReadLine()) != null)
{
// Split by ";"
String[] separador = linea.Split(';');
}
But when I see the content of "linea", I have this:
"20150218";\"C7\";\"B895\";"00101";\"FTBCCAL16\"
As you see, the streamreader add some special character to the output like "" and \. I want to obtain this.
20150218;"C7";"B895";00101;"FTBCCAL16"
Is there a way to obtain this?
Thanks in advance! Regards!
You are watching it in Visual Studio debugger, which just shows you your lines this way. You can write your result into a console or into the file. And you will see normal text without special characters.
StreamReader is not adding or modifying the strings read from the file at all.
If you are viewing the contents of separador in the Visual Studio debugger, it will add an escape sequence to any special characters (for display purposes).
The displayed format matches how you would have to enter them in the code editor if you were creating a string constant.
For example,
However, the real contents of these strings (in memory) are not escaped. They are exactly as you expect them to be in your question.
If you output them or try to manipulate them in code they will have the correct contents.
So, your code is correct. You just have to understand escape sequences and how strings appear in the Visual Studio debugger.
Update:
See this question for an explanation of how to display unquoted strings in the debugger.
Okay here is the quotation from MSDN
At compile time, verbatim strings are converted to ordinary strings with all the same escape sequences. Therefore, if you view a verbatim string in the debugger watch window, you will see the escape characters that were added by the compiler, not the verbatim version from your source code. For example, the verbatim string #"C:\files.txt" will appear in the watch window as "C:\files.txt".
In your case for " it uses \" (Verbatim string)and this can be visible at debugging time.
Why this happens ?
Double quotation mark " is an escape sequence
Escape sequences are typically used to specify actions such as carriage returns and tab movements on terminals and printers. They are also used to provide literal representations of nonprinting characters and characters that usually have special meanings, such as the double quotation mark (")
So when a string purposefully contains an escape sequence, you need to represent it as a verbatim string. That's what compiler do and that's what you see in debugger
I want to assign a xml code into a string variable.
I can do this without escaping single or double-quotes by using triple-quote in python.
Is there a similar way to do this in F# or C#?
F# 3.0 supports triple quoted strings. See Visual Studio F# Team Blog Post on 3.0 features.
The F# 3.0 Spec Strings and Characters section specifically mentions the XML scenario:
A triple-quoted string is specified by using three quotation marks
(""") to ensure that a string that includes one or more escaped
strings is interpreted verbatim. For example, a triple-quoted string
can be used to embed XML blobs:
As far as I know, there is no syntax corresponding to this in C# / F#. If you use #"str" then you have to replace quote with two quotes and if you just use "str" then you need to add backslash.
In any case, there is some encoding of ":
var str = #"allows
multiline, but still need to encode "" as two chars";
var str = "need to use backslahs \" here";
However, the best thing to do when you need to embed large strings (such as XML data) into your application is probably to use .NET resources (or store the data somewhere else, depending on your application). Embedding large string literals in program is generally not very recommended. Also, there used to be a plugin for pasting XML as a tree that constructs XElement objects for C#, but I'm not sure whether it still exists.
Although, I would personally vote to add """ as known from Python to F# - it is very useful, especially for interactive scripting.
In case someone ran into this question when looking for triple quote strings in C# (rather than F#), C#11 now has raw string literals and they're (IMO) better than Python's (due to how indentation is handled)!
Raw string literals are a new format for string literals. Raw string literals can contain arbitrary text, including whitespace, new lines, embedded quotes, and other special characters without requiring escape sequences. A raw string literal starts with at least three double-quote (""") characters. It ends with the same number of double-quote characters. Typically, a raw string literal uses three double quotes on a single line to start the string, and three double quotes on a separate line to end the string. The newlines following the opening quote and preceding the closing quote are not included in the final content:
string longMessage = """
This is a long message.
It has several lines.
Some are indented
more than others.
Some should start at the first column.
Some have "quoted text" in them.
""";
Any whitespace to the left of the closing double quotes will be removed from the string literal. Raw string literals can be combined with string interpolation to include braces in the output text. Multiple $ characters denote how many consecutive braces start and end the interpolation:
var location = $$"""
You are at {{{Longitude}}, {{Latitude}}}
""";
The preceding example specifies that two braces starts and end an interpolation. The third repeated opening and closing brace are included in the output string.
https://devblogs.microsoft.com/dotnet/csharp-11-preview-updates/#raw-string-literals
https://learn.microsoft.com/en-us/dotnet/csharp/whats-new/csharp-11
As shoosh said, you want to use the verbatim string literals in C#, where the string starts with # and is enclosed in double quotation marks. The only exception is if you need to put a double quotation mark in the string, in which case you need to double it
System.Console.WriteLine(#"Hello ""big"" world");
would output
Hello "big" world
http://msdn.microsoft.com/en-us/library/362314fe.aspx
In C# the syntax is #"some string"
see here