Why below code doesn't change ScaleY to 1?
var transform = new ScaleTransform { ScaleY = 0 };
var story = new Storyboard();
var animation = new DoubleAnimation {
Duration = new Duration(new TimeSpan(0)), To = 1 };
Storyboard.SetTarget(animation, transform);
Storyboard.SetTargetProperty(animation, new PropertyPath("ScaleY"));
story.Children.Add(animation);
story.Begin();
I use transform indirectly: it use for render some UIElements and kept in their DependencyProperty.
Does it perhaps work if you drop the Storyboard and just call BeginAnimation directly?
var transform = new ScaleTransform { ScaleY = 0 };
var animation = new DoubleAnimation { Duration = TimeSpan.Zero, To = 1 };
transform.BeginAnimation(ScaleTransform.ScalyYProperty, animation);
Note that this will only have any effect if the animation's FillBehavior has a value of HoldEnd. Otherwise the animated property will immediately revert back to its local value (which is 0 here). Fortunately HoldEnd is the default value for FillBehavior.
And of course the transform should be used somewhere.
Related
This is my code to do animation (change opacity) for one ui element.
var animation = new DoubleAnimation
{
To = 0.0,
Duration = TimeSpan.FromSeconds(5),
FillBehavior = FillBehavior.HoldEnd
};
Storyboard story = new Storyboard();
Storyboard.SetTarget(animation, element1);
Storyboard.SetTargetProperty(animation, "Opacity");
story.Children.Add(animation);
story.Begin();
It works, for some reason I need to it only programmatically. The problem is I need to animate several controls at once. Is there any solution for several controls?
You would have to define several animations for this controls.
var animation1 = new DoubleAnimation
{
To = 0.0,
Duration = TimeSpan.FromSeconds(5),
FillBehavior = FillBehavior.HoldEnd
};
var animation2 = new DoubleAnimation
{
To = 0.0,
Duration = TimeSpan.FromSeconds(5),
FillBehavior = FillBehavior.HoldEnd
};
Storyboard.SetTarget(animation1, element1);
Storyboard.SetTargetProperty(animation1, "Opacity");
Storyboard.SetTarget(animation2, element2);
Storyboard.SetTargetProperty(animation2, "Opacity");
Storyboard story = new Storyboard();
story.Children.Add(animation1);
story.Children.Add(animation2);
story.Begin();
I want to make a turning animation to show the vehicle turning in Junction. Also, I want to do it with c#(code behind) because my vehicles are dynamically added.
Solution tried:
I tried to use TranslateTransform and RotateTransform but I could only create sharp turn animation. I want to create a smooth turn animation.
Current Output:
Sample Code
//Code to add car
private void Click1_Click(object sender, RoutedEventArgs e)
{
var myCar = new Image()
{
Source = new BitmapImage(new Uri("ms-appx:///Assets/RedCar.png")),
Width = 140,
Height = 65,
HorizontalAlignment = HorizontalAlignment.Left,
VerticalAlignment = VerticalAlignment.Top,
RenderTransform = new TranslateTransform()
{
X = 0,
Y = actualHeight / 2 - 145
}
};
VehicleGrid.Children.Add(myCar);
}
//Code to create forward animation
private void MoreForward(UIElement element)
{
Storyboard storyboard = new Storyboard();
DoubleAnimation doubleAnimation = new DoubleAnimation()
{
Duration = new Duration(new TimeSpan(0, 0, 3)),
To = LeftRoad.ActualWidth - 140
};
Storyboard.SetTarget(doubleAnimation, element.RenderTransform);
Storyboard.SetTargetProperty(doubleAnimation, "X");
storyboard.Children.Add(doubleAnimation);
storyboard.Begin();
}
Full Code
You can see my full code in Github: TrafficManagementSystem
There's an interesting post that details how to create a layout path where your object can move along with.
But in a simple scenario like yours, you basically just want a curved motion like what's described in this Android's Material Design Guideline. Yeah... Android's, as we don't have native curved motion API support just yet (the Windows UI team did mention that they are looking to support this in the future though).
However, it's not too difficult to create your own curved motion. In fact, many have used this trick on the web already - apply the opposite speed of an easing on each axis. Also in your case, you will want the curve of the easing to be sharp in order to produce a nice turning animation.
For example, for a car coming from left to right and then doing a left turn, you can apply a QuinticEase with EaseIn mode on x-axis and one with EaseOut on y-axis. To turn the vehicle, just apply another rotation animation to it but with a short delay and lesser duration to ensure the turning only happens at the crossroad.
By slightly modifying my answer in this question, you can achieve what I described above with the following code
The AnimateTransform helper method
public static void AnimateTransform(this UIElement target, string propertyToAnimate, Orientation? orientation, double? from, double to, int duration = 3000, int startTime = 0, EasingFunctionBase easing = null)
{
if (easing == null)
{
easing = new ExponentialEase();
}
var transform = target.RenderTransform as CompositeTransform;
if (transform == null)
{
transform = new CompositeTransform();
target.RenderTransform = transform;
}
target.RenderTransformOrigin = new Point(0.5, 0.5);
var db = new DoubleAnimation
{
To = to,
From = from,
EasingFunction = easing,
Duration = TimeSpan.FromMilliseconds(duration)
};
Storyboard.SetTarget(db, target);
var axis = string.Empty;
if (orientation.HasValue)
{
axis = orientation.Value == Orientation.Horizontal ? "X" : "Y";
}
Storyboard.SetTargetProperty(db, $"(UIElement.RenderTransform).(CompositeTransform.{propertyToAnimate}{axis})");
var sb = new Storyboard
{
BeginTime = TimeSpan.FromMilliseconds(startTime)
};
sb.Children.Add(db);
sb.Begin();
}
Create the turning animations
MyCar.AnimateTransform("Translate", Orientation.Horizontal, null, -600, duration: 3000, easing: new QuinticEase
{
EasingMode = EasingMode.EaseIn
});
MyCar.AnimateTransform("Translate", Orientation.Vertical, null, -600, duration: 3000, easing: new QuinticEase
{
EasingMode = EasingMode.EaseOut
});
MyCar.AnimateTransform("Rotation", null, null, -90, duration: 2000, startTime: 500);
Result in motion
Alternatively, you can replace the traditional Storyboard animation with the new Composition API, which provides fully customizable easing functions (see below), but the idea is the same.
public static CubicBezierEasingFunction EaseOutExpo(this Compositor compositor) =>
compositor.CreateCubicBezierEasingFunction(new Vector2(0.14f, 1f), new Vector2(0.34f, 1f));
Hope this helps!
I'd like to fade in a drop shadow effect on a DataGrid over 2 seconds, which fades out over 2 seconds again after the fade-in animation is completed.
My code so far:
DropShadowEffect dropShadowEffect = new DropShadowEffect();
dropShadowEffect.ShadowDepth = 0;
dropShadowEffect.Color = Colors.LightSeaGreen;
dropShadowEffect.Opacity = 0;
dropShadowEffect.BlurRadius = 20;
element.Effect = dropShadowEffect;
Storyboard storyboard1 = new Storyboard();
TimeSpan duration1 = TimeSpan.FromMilliseconds(2000);
DoubleAnimation animateOpacity1 = new DoubleAnimation() { From = 0, To = 1, Duration = new Duration(duration1) };
Storyboard.SetTargetName(animateOpacity1, element.Name);
Storyboard.SetTargetProperty(animateOpacity1, new PropertyPath(DropShadowEffect.OpacityProperty));
DoubleAnimation animateOpacity2 = new DoubleAnimation() { From = 1, To = 0, Duration = new Duration(duration1) };
Storyboard.SetTargetName(animateOpacity2, element.Name);
Storyboard.SetTargetProperty(animateOpacity2, new PropertyPath(DropShadowEffect.OpacityProperty));
storyboard1.Children.Add(animateOpacity1);
storyboard1.Children.Add(animateOpacity2);
storyboard1.Begin(element);
Upon executing the code, nothing happens.
If you simply want to do DoubleAnimation, no need to complex it using StoryBoard. Also, you can achieve this with only single double animation with property AutoReverse set to true.
Moreover, do animation on dropShadowEffect object instead of element object.
TimeSpan duration = TimeSpan.FromMilliseconds(2000);
DoubleAnimation animateOpacity = new DoubleAnimation() { From = 0, To = 1,
Duration = duration, AutoReverse = true };
dropShadowEffect.BeginAnimation(DropShadowEffect.OpacityProperty,
animateOpacity);
I have the following method which works. I'd like to put it in a utility method that returns a Storyboard. Every attempt I have made at converting this to a Storyboard has failed, and I've spent a lot of time researching. I'm ready to give up unless someone comes to my rescue.
Here's the code I want to convert:
public override void Begin(FrameworkElement element, int duration)
{
var transform = new ScaleTransform();
element.LayoutTransform = transform;
var animation = new DoubleAnimation
{
From = 1,
To = 0,
Duration = TimeSpan.FromMilliseconds(duration),
FillBehavior = FillBehavior.Stop,
EasingFunction = new QuinticEase { EasingMode = EasingMode.EaseIn }
};
transform.BeginAnimation(ScaleTransform.ScaleXProperty, animation);
transform.BeginAnimation(ScaleTransform.ScaleYProperty, animation);
}
So, instead of the two BeginAnimation() calls, I want to return a Storyboard so all I have to do is call storyboard.Begin(). I know this shouldn't be that hard to do, but I'm just not getting it.
Thanks.
EDIT: In response to H.B's suggestions, I tried the following code, which still does not work:
private static Storyboard CreateAnimationStoryboard(FrameworkElement element, int duration)
{
var sb = new Storyboard();
var scale = new ScaleTransform(1, 1);
element.RenderTransform = scale;
element.RegisterName("scale", scale);
var animation = new DoubleAnimation
{
From = 1,
To = 0,
Duration = TimeSpan.FromMilliseconds(duration),
FillBehavior = FillBehavior.Stop,
EasingFunction = new QuinticEase { EasingMode = EasingMode.EaseIn }
};
sb.Children.Add(animation);
Storyboard.SetTarget(animation, scale);
Storyboard.SetTargetProperty(animation, new PropertyPath(ScaleTransform.ScaleXProperty));
return sb;
}
I know I only animated the X axis - just want to get something to work first.
You'll need two animations and then set the attached Storyboard properties to animated the right property on the right object using SetTargetProperty and SetTargetName.
Due to how storyboards work you also need to set a namescope (NameScope.SetNameScope), register the name of the transform, and call StoryBoard.Begin with the containing element overload.
e.g.
NameScope.SetNameScope(element, new NameScope());
var transform = new ScaleTransform();
var transformName = "transform";
element.RegisterName(transformName, transform);
element.RenderTransform = transform;
var xAnimation = new DoubleAnimation(2, TimeSpan.FromSeconds(1));
var yAnimation = xAnimation.Clone();
var storyboard = new Storyboard()
{
Children = { xAnimation, yAnimation }
};
Storyboard.SetTargetProperty(xAnimation, new PropertyPath("(ScaleTransform.ScaleX)"));
Storyboard.SetTargetProperty(yAnimation, new PropertyPath("(ScaleTransform.ScaleY)"));
Storyboard.SetTargetName(xAnimation, transformName);
Storyboard.SetTargetName(yAnimation, transformName);
storyboard.Begin(element);
I suggest using Expression Blend and start recording from there, it should create your storyboards in XAML. Rather than hard coding it with C# and trying to translate it 1 by 1 to storyboard thus it can be a prone error.
I would like to use it, but it doesnt't work, I wanna create a tile animation, in code behind, or if you know a project for this gol, pls write me
Deployment.Current.Dispatcher.BeginInvoke(() =>
{
while(true){
Duration duration = new Duration(TimeSpan.FromSeconds(0.15));
// Create two DoubleAnimations and set their properties.
DoubleAnimation myDoubleAnimation1 = new DoubleAnimation();
myDoubleAnimation1.Duration = duration;
myDoubleAnimation1.From = -173
myDoubleAnimation1.To = 173;
Storyboard sb = new Storyboard();
sb.Duration = duration;
sb.Children.Add(myDoubleAnimation1);
Storyboard.SetTarget(myDoubleAnimation1, image);
// Set the attached properties of Canvas.Left and Canvas.Top
// to be the target properties of the two respective DoubleAnimations.
Storyboard.SetTargetProperty(myDoubleAnimation1, new PropertyPath(StackPanel.MarginProperty));
// Begin the animation.
sb.Begin();}
});
Here is the working example, if anybody needs:
//Animate margin for Label, named "label" from right to left. from 300 to 0.
var sb = new Storyboard();
var ta = new ThicknessAnimation();
ta.BeginTime = new TimeSpan(0);
ta.SetValue(Storyboard.TargetNameProperty, "label");
Storyboard.SetTargetProperty(ta, new PropertyPath(MarginProperty));
ta.From = new Thickness(300, 30, 0, 0);
ta.To = new Thickness(0, 30, 0, 0);
ta.Duration = new Duration(TimeSpan.FromSeconds(3));
sb.Children.Add(ta);
sb.Begin(this);
Use a ThicknessAnimation instead of a DoubleAnimation. It's almost the same.
Edit:
If you want to make the Animation endless use Timeline.RepeatBehavior.
myThicknessAnimation1.RepeatBehavior = RepeatBehavior.Forever;