I've already added an background image to my pdf using :
<fo:simple-page-master master-name="LetterLandscapePortada" page-height="21.59cm" page-width="28.94cm" >
<fo:region-body margin="0cm" background-repeat="no-repeat" background-image="url(file://D:/XSL/fondoPortada.jpg)" />
</fo:simple-page-master>
But I'm having problems in order to "auto-fit" the image to the page because the image is larger than the page size.
Does is posible add a property in order to fit the background image to the page?
The spec for xslfo doesn't specify anything for this.
See: http://www.w3schools.com/xslfo/obj_region-body.asp
However, there are many ways around this. In xslfo you could add an image before any text is displayed and set its dimensions accordingly, it would then seem to be a 'background' image (with the lowest z-index). A non xsl solution would be to modify the image itself by adding the proper white space/resize in an editor like GIMP and then proceeding as you already do. You can also use the 'position' attributes though they will be of little help if you don't modify the image.
Related
Is there any way I can convert the contents of a rich text box to a bitmap in WPF?
I tried the solution mentioned in the following post: Saving RichTextBox FlowDocument to image
But my dilemma is I am unable to figure out how to calculate the required size of the bitmap before hand that would cover the entire flow document.
Please help. Thanks in advance.
FlowDocuments don't have a rigid size, that's the point:
Flow Document Overview:
Flow documents are designed to optimize viewing and readability. Rather than being set to one predefined layout, flow documents dynamically adjust and reflow their content based on run-time variables such as window size, device resolution, and optional user preferences.
You need to set either a height or a width restraint, or both. If you set only one, width for example, the FlowDocument will update to stretch vertically until all the content has been displayed. After you set the constraint(s), you can check the actual size of the document and that will give you the required size of your image.
My C# application generates a Crystal Report that contains many images with varying size, orientation, and aspect ratio. To make them appear correctly in the report, I use a white Square Canvas and center the image inside. This makes lot of wasted space:
Is it possible to resize each picture in the report to the appropriate size from C#? I have found a way to resize the images here, but I don't know if I can perform these steps from c#, especially when it comes to "Calculating and setting Width and Height to the proper number of twips."
I know the size of my image in C#, but can it be passed to and implemented in the report? Images are inside an xml file in base64 format.
Designer View:
Okay, i don't have a working solution but an idea that might help you ( and i hope it will )
I searched a programmatically way to do what you want, and i don't find anything. Unless the fact that you can manipulate your FieldObject with C#, it can't be used in your report.
So, i'll try to guide you with some screenshoots, but i am French and my screens will be in french, so sorry for the bad translations !
You can write a formula to change the display of your BinaryImage in your subreport. I just found a way to change the width of you data, not the height.
So, assuming my image is stored in "ARTICLE" table, and the name of the column is "ART_IMAGE". I put my data in the detail section and create a new formula, ignore the created formula, you need to access to the "formatting formulas" :
Here in my screen it is called "Formules de mise en forme". In the left you can see my simple report and on the right the formula panel, i clicked on my details section and i can see my only field.
Now right click on this field and create a new formatting formula :
A pop up is displayed, you'll need to choose something like that in english "
Adjusting the width" :
Now, you have to return the new width of your current image, a way to know what is the current width is to store it in a field in your database.
So if in your database you have a field for your image, and a field like image_width. In my example i have a field name ART_DIMENSION and i store the width of the image.
The tricky part is that this formula accept twips not inch or cm. For you information 1 inch = 1440 twips.
So in my example here is the formula :
So for each image to display, the width of my image will be the width stored in "ART_DIMENSIONS" ( with the good convert : inch to twips )
In your report design, with a formula like this which set the width dynamically for your image, you can set the section and your image object with a very small width. In this case your images will be displayed one by another because the section width will be edited for each image to display.
I tried to be very clear, hope it will help you, ask me any questions if you don't understand something.
Regards,
I'm using Ribbon from RibbonControlsLibrary.dll 4.0.0.11019, .NET 4.0, C#, WPF.
It can be downloaded with a free samples here: http://www.microsoft.com/en-us/download/details.aspx?id=11877
The problem comes when a RibbonToggleButton is displayed. Then it's image seems to be a little bit broken, like a part of image is shifted for a few pixels.
EDIT: Thanks to kind people I can post and image now:
Here are some details:
Image is displayed in it's large variant
Image size is 32x32
I set image scaling to none for all the images of Ribbon
Image is broken only when the text in RibbonToggleButton has 1 line
Same image displays correctly in any other kind of button (RibbonButton, RibbonSplitButton etc.)
The image is displayed correctly when I set the font size in Windows to Medium (125%)
My OS is Windows 8
When I set the VerticalContentAlignment for the toggle button to "Bottom", the Image starts to display correctly, but the whole Ribbon starts to look ugly.
I experience this problem for all the toggle buttons, including those which are in a Microsoft's free samples.
I guess that probably the Image doesn't have enough space, so it's compressed from 32x32 to some smaller size.
I use the theme that is made of Microsoft's Generic theme, that is included in the RibbonControlsLibrary.dll. I guess I could fix the RibbonToggleButton template somehow, but I have no idea what to fix there.
Any ideas?
In the xaml declaration of your UserControl / Window put that line:
RenderOptions.BitmapScalingMode="HighQuality"
I would like to know how I can create one image from many. I would like to create a tile in my windows phone application like in this image (specifically, the People tile):
(source: addictivetips.com)
I have nine pictures, and I would create an image, that I will add like tile to background. Does anybody know how can I create an image that looks like the one in that picture?
I have very little experience in this space, but have you considered creating a control that simply displays up to 9 pictures side by side in a grid like that? You then can bind each image independently & change them out however you want. This article touches on how to bind phontos in WP7 nicely:
http://msdn.microsoft.com/en-us/library/hh286418(v=vs.92).aspx
If you're talking about assembling an actual graphic image like a jpeg or bitmap, you'll need to look at the Image Class, Bitmap Class, and Graphics Class. Essentially you'll need to implement the following steps:
Load the relevant images with From method in Image, typically Image.FromFile.
Determine how many rows and columns you'll be using.
Calculate the total width and height for your layout using the widths and heights of the loaded images with appropriate padding added.
Create a new Bitmap of the appropriate size with the correct background color and iamge format.
Have variables for the current drawing location (x & y).
Have variables for the current row and column in your layout.
In a loop, Create your Graphics object.
Use Graphics.DrawImage to add your loaded image to the layout bitmap.
Increment your drawing row and or column as appropriate.
Calculate your new drawing location.
Repeat until done.
One of the options is to use WriteableBitmapEx
Also you can probably find an answer to your question here: How can I merge two images into one?
I'm attempting to display a "LargeIcon" view in a listview control, however the images I specify are blurry. This is what I have so far:
alt text http://img220.imageshack.us/img220/1005/blurryiconsql3.jpg
The .png files are 48x48 and that's what I have it set to display at in the ImageList properties. There's one thing that I've noticed (which is probably the cause) but I don't know how to change it. Inside the "Images Collection Editor" where you choose what images you want for the ImageList control, it looks like it's setting the wrong size for each image.
alt text http://img83.imageshack.us/img83/5218/imagepropertiesmf9.jpg
As you can see the "PhysicalDimension" and the "Size" is set to 16x16 and not abled to be manipulated. Does anyone have any ideas? Many thanks!
Be sure to set ImageList.ImageSize to 48 x 48 too.
When adding a .PNG Icon format size the editor tends to pick the first entry size in that file, so it picks up the 16x16 entry and it's stretching that out. That's why you see the 16x16 in the properties there. As suggested, the support for PNG is poor, I'm often found myself rolling over to another format as well to avoid this.
You can open the file in Paint.Net if you need a free editor or something more fully featured like Photoshop or Fireworks and extract the exact size you want.
I'm not sure if its the problem in this specific case, but Microsoft support for the PNG format is generally poor. Try adding the images in .bmp format and they should display fine.
Check also the ColorDepth setting on your ImageList. I had a similar issue with a TreeView control, but after reading the previous posting regarding the size I found this setting, played around with it a bit and found that it greatly affects the way images from an ImageList are rendered. The higher the depth the better the quality.
Be sure to set the ImageList size to 48x48 px BEFORE you add the images.
If the ImageList is set to 32x32 and you add a 48x48 image, the icon is resized to 32x32. When you change the ImageList to 48x48 afterwards, the image is just resized again, thus losing quality and going blurry.
Also, Paint.NET (or Photoshop) can't open .ico files.
Visual Studio/.NET can handle 32-bit PNG images fine, the built-in image editor in VS is a bit lack-lustre though.