i have a timer that changes a label's text each tick. For some reson, it stop and does not continue looping. Why?
private int count = 0;
private void timer1_Tick(object sender, EventArgs e)
{
string[] arr4 = new string[3]; // 4
arr4[0] = "one";
arr4[1] = "two";
arr4[2] = "three";
if (count == 4)
{
count = 0;
}
toolStripStatusLabel1.Text = arr4[count];
count++;
}
Also, when my form loads, the label's text is blank. Then it goes to arr4[0]. When it loops again, the text starts at arr[0]. Why is the text blank first, and how do i fix it?
Looks like your original question was answered in the comments. I'll answer your second question from the comments.
Your timer1_Tick event doesn't execute immediately when your program starts. The first time it executes is after 5000ms, in your case. So the label will show blank at first, then change to the value of arr4[0]. If you don't want that, you could:
set the value of the label in the designer at design time
set the value of the label in the constructor at run time
pull the creation of the array out of the timer tick event so you're not recreating it every 5 seconds, make it a class variable, and create it in the constructor and then set the label to arr4[0] immediately after creating it
Related
This really suprised me. One of the simplest things doesn't work, making a counter. I'm making a kinda game application in c# and there is also a timer who counts the time. Very simple right? I know how to code this and this is something I did before but I don't understand why it isn't working now.
int i = 0;
i++;
label1.Text = i.ToString();
label1.Text turns in to 1 and nothing else happens. Also tryied this with a timer but it freeezes in 1. I know this post isn't really going to help other people but it is very frustrating.
Why you are always getting 1 in your label1 text?
The reason is very simple, each time you are getting to the first line, i is 0:
// Line 1
int i = 0; // declaring and setting i to 0
// Line 2
i++; // incrementing i to 1
// Line 3
label1.Text = i.ToString(); // displaying i (which is equal to 1)
and then again you are getting to the Line 1 and setting i=0, etc...
I presume you have a UI application (win form, web form etc...)
You already mentioned you have a timer that works fine and a label where you output the incremented i variable.
As already commented in order to see a change in your label you can use a loop as following:
int length = 100; // for example
for (int i = 0; i < length; i++)
{
label1.Text = i.ToString();
}
The output in label1 text will be 0, then 1, then 2 .... and finally 99.
Obviously you won't be able to see all those values except the last one 99 at run-time but you can debug and see how it works.
I presume, what you needed is to have your label text changing each time the timer will tick.
Following a code example how you could implement it:
private int i = 0; // initialized once in this UI class
private void timer1_Tick(object sender, EventArgs e)
{
label1.Text = i.ToString();
i++; // will increment by one each time the timer is ticking
}
Set your timer interval to ~1000 so you could clearly see how your text label increments at run-time.
If you want to increment it you have to add the incrementing logic in a loop like for or while loop:
If you want to use timer to count something please refer to this question : here
When I clicked button starts for loop from i=0 and I want to see on the label value of i. However I only see last values of i.
public partial class Form1 : Form
{
int i;
public Form1()
{
InitializeComponent();
}
private void btnclick_Click(object sender, EventArgs e)
{
for ( i = 0; i < 3; i++)
{
lblForLoopExample.Text = i.ToString();
System.Threading.Thread.Sleep(1000);
}
}
}
when I run the my code I only see on the label ; 2 .
I want to see such a like below;
When the started For loop, i = 0, I must see the 0 on the Label.Text. An then when the i = 1, I must see 1 on the label.Text. And when i = 2, I must see 2 on the Label.Text.
I added Thread.Sleep(1000) however, result didn't change.
Where I am make mistake?
Please help me,
if you help me , I will appreciate you.
Thanks,
You need to append the lbl to get all the values. Right now, it finishes the loop and give you the last value in your label
public partial class Form1 : Form
{
int i;
public Form1()
{
InitializeComponent();
}
private void btnclick_Click(object sender, EventArgs e)
{
for ( i = 0; i < 3; i++)
{
lblForLoopExample.Text + = i.ToString();
}
}
}
Your problem is that you're doing work on the UI thread while expecting the UI thread to update your form.
While you process your loop, the UI thread is actually executing this code. The UI thread is therefore unable to update the form with the intermediate values you are setting within the loop. Once your code completes, the UI thread is then free to update the form. That's why you see the last value only.
You can see this better if you updated your code to loop ten million times instead of 3. Your form will become unresponsive and will appear locked up. That's because Windows knows your UI thread is locked in an intensive process and is unable to update the UI.
The solution is to use a background thread to run your process and synchronize updates with the UI thread. You'll also have to slow your loop down to see the changes, as others have suggested.
To learn more about how the UI thread works, and how to synchronize background threads with it, read this article (it's about WPF, but it covers the general case).
Each loop you re-write the string. Instead of saying
lblForLoopExample.Text = i.ToString();
You need to add to the string on each iteration. I'd create a variable to hold the value, and so something like this:
string myString = string.Empty;
for(i=0;i < 3; i++)
{
myString += i.ToString() + ", ";
}
lblForLoopExample.Text = myString.substring(0, (myString.length - 1));
substring is just so you don't have that trailing comma. It's kind of dirty code, but it will work.
First of all, your code won't compile as you are missing the exact format of the ToString() method in i.ToString along with the ;
lblForLoopExample.Text = i.ToString();
^^^
As per your code, you should try this:
for ( i = 0; i < 3; i++)
{
lblForLoopExample.Text += i.ToString() + ", ";
}
What I am doing:
I am receiving a string of data every second constantly from a serial port. I am processing it and also displaying this string on the rich text box.
Problem:
I want the user to go through the old strings and copy any, but user can't do it because data is coming every second and auto-scrolling occurs.
My desired solution:
I am thinking to have a check-box 'pause'. when user checks it updating of rich text box stops. and user can go in history and copy a string. but in the mean while I don't want to stop the incoming strings from the serial port as I am doing other things as well with the incoming strings.
So when user uncheck 'pause' checkbox, all the strings which had arrived earlier while user had checked' pause' checkbox also appear on rich text box along with new ones.
is there a way to do it ?
Suppose that when you check the Pause button then every incoming text is appended to a StringBuilder instead of the RichTextBox. When the user uncheck the Pause button you copy everything from the StringBuilder to the RichTextBox
// Assume that these are somewhere globals of your forms
RichTextBox rtb = new RichTextBox();
CheckBox chkPause = new CheckBox();
StringBuilder sb = new StringBuilder();
protected void chkPause_CheckedChanged(object sender, EventArgs e)
{
if(!chkPause.Checked)
{
rtb.AppendText = sb.ToString();
// Do not forget to clear the buffer to avoid errors
// if the user repeats the stop/go cycle.
sb.Clear();
}
else
{
// Start a timer to resume normal flow after a timer elapses.
System.Windows.Forms.Timer t = new System.Windows.Forms.Timer();
t.Interval = GetSuspensionMilliseconds();
t.Tick += onTick;
t.Start();
}
}
protected void onTick(object sender, EventArgs e)
{
if (chkPause.Checked)
{
// Set to false when the timing elapses thus triggering the CheckedChanged event
chkPause.Checked = false;
System.Windows.Forms.Timer t = sender as System.Windows.Forms.Timer;
t.Stop();
}
}
now in the point where the incoming data is passed to the RichTextBox you could add
....
string incomingData = ReceiveDataFromSerialPort();
if(chkPause.Checked)
sb.AppendLine(incomingData);
else
rtb.AppendText = incomingData;
This is what I did in MainPage.xaml.cs to create the text animation effect:
private readonly double TEXT_TIMER = 30.0;
private int index;
private void updateText(String text)
{
_text = text;
index = 0;
MainTextBlock.Text = "";
_textTimer.Tick += _textTimer_Tick;
_textTimer.Interval = TimeSpan.FromMilliseconds(TEXT_TIMER);
_textTimer.Start();
}
private void _textTimer_Tick(object sender, EventArgs e)
{
if (index < _text.Length)
{
string s = _text[index].ToString();
MainTextBlock.Text += s;
index++;
}
else
{
_textTimer.Stop();
}
}
I have a list of texts/strings and also a button, say NextButton on the MainPage.xaml. The updateText method is in the click event of NextButton, and what it does is to fetch a text from the list of texts/strings and update the textblock using the animation effect.
But I realised that as I continued to click on the NextButton, it was as if the value of TEXT_TIMER was reducing and the animation effect happened more rapidly until there was no animation anymore (i.e. the text just appeared in the textblock without any effects).
Anybody got any idea why this is happening and how I can fix it?
EDIT:
I have included code to stop the timer after the textblock has been updated with the hopes that solves possible multiple Tick callbacks but nothing still.
It's not that TEXT_TIMER value is reducing, but _textTimer is not stopping, so you have multiple timer ticks.
Try adding _textTimer.Stop() at the start of updateText() method.
On Dan Bryant's advice:
My program flow was registering for the Tick event multiple times beacuse I put it into the updateText method which got called multiple times during program run. All I had to do was move that line of code where the Tick event is registered, _textTimer.Tick += _textTimer_Tick; into the constructor, i.e after InitializeComponent() and problem solved!
I have the following piece of code:
class NotepadCloneNoMenu : Form
{
protected TextBox txtbox;
public NotepadCloneNoMenu(string a)
{
Text = "Notepad Clone No Menu";
txtbox = new TextBox();
txtbox.Parent = this;
txtbox.Dock = DockStyle.Fill;
txtbox.BorderStyle = BorderStyle.None;
txtbox.Multiline = true;
txtbox.ScrollBars = ScrollBars.Both;
txtbox.AcceptsTab = true;
txtbox.AppendText(a);
txtbox.AppendText("\n");
}
}
class program1
{
public static void Main()
{
string result = "abc";
while(true)
{
Application.Run(new NotepadCloneNoMenu(result));
}
}
}
I want to continuously appending the string result to the textbox so it looks like this:
abc
abc
abc
so on and so forth. However, every time I called this:
Application.Run(new NotepadCloneNoMenu(result));
It will reset the textbox. Is there anyway I can update the textbox continuously? I am fairly new to C# so this is quite confusing to me.
thanks,
Phuc Pham
First of all, you're continuously closing and opening an application. That's why it resets. If you want to run an infinite loop, you probably want to run it inside your application proper.
In your application code, use some event (maybe a timer would suit you) to append text to the textBox. Like this:
public someEventOnTheForm (object sender, EventArgs e)
{
txtBox.Text += "Notepad Clone to Menu";
}
There's two more things to take into account: first, if you don't have a stoping condition, this will just keep filling memory until you run out of it.
Second, windows forms run on only one thread by default. You'll be using that thread to update the textbox, so while it's appending text, the form itself will be unusable. It'll probably blank out during the event if it starts taking long. You'll need a second thread to handle the event if you want your form to be usable.