When I build a Silverlight project, what happens to XAML files? - c#

Can you please explain the life-cycle of an XAML file in terms of compiling?
When I build a Silverlight project what happens to a XAML file in the build process?

The answer about the intermediate .g.cs file by Jon Skeet (now deleted, but that part quoted below for context) was partly correct but did not answer your actual question in full:
JS: An early part of the build process creates a Foo.i.g.cs file in the
obj directory containing a partial class, and that gets compiled in
the normal way along with your own .cs files.
The .g.cs files contain pieces missing from the code-behind required to connect named elements to class members during InitialiseComponent(). e.g. this is from a basic MainPage.g.cs:
public void InitializeComponent() {
...
System.Windows.Application.LoadComponent(this, new System.Uri("/SilverlightApp1;component/MainPage.xaml", System.UriKind.Relative));
this.LayoutRoot = ((System.Windows.Controls.Grid)(this.FindName("LayoutRoot")));
}
This is bit like the designer files generated for WinForms controls/dialogs, but happens at compile time instead of design time.
The compiler parses to validate the XAML and to determine what named elements need to be generated (into the partial class).
The XAML file itself gets stored as a resource in the DLL during the build (in the example above it is stored as "/SilverlightApp1;component/MainPage.xaml")
Note: For WPF only, the embedded XAML file is actually converted to a more memory-efficient binary version referred to as a BAML file.
Answering your comment to Jon Skeet (now deleted), you are partially correct in asking:
So parsing the whole XAML document -all the elements, attributes etc.-
is not part of the WPF or SL builds? Am I correct?
Aside from the parsing mentioned above, for validation and named elements, the rest of the parsing (of the element tree and templates etc) is actually done at runtime when LoadComponent() effectively deserializes the XAML and creates a visual tree of elements you authored.

When you build a Silverlight project a .xap file is created, this is basically just a .zip-file with another extension, containing an AppManifest.XAML and your project in a DLL-file (together with DLL:s for other dependencies).
If you run the DLL through dotPeek or Reflector you'll see that the XAML-files you created are found intact in the resources of the dll.

Related

Can you add a language without forcing a rebuild?

My app has been designed to be able to run on two different languages, english and czech. In order to accomplish this, I've created 2 resource files:
If an end-user would like to add another language, for example GlobalStrings.fr-FR.resx, is it possible to allow for this functionality without rebuilding the application?
If we look at the properties of these resource files:
I'm not understanding what embedded resource means. Does this mean that in order for the app to consume this file, the application must be rebuilt?
How do we create a resource file, that is open to be extended/changed by the end user, without having to rebuild the entire application
?
Regular .Net resources are compiled into assembly with particular name and loaded by matching that name. So if "end-user" is ok to translate strings in resx file and compile resources into assembly with particular name (like "MyResources.cs-cz.dll") you can do that with default .Net behavior without recompiling main code. See MSDN:Packing and Deploying resources and related links for more information.
Note that you don't need Visual Studio for it and can use csc command line compiler to embed resources on user's machine - so if your really want you can provide simple script that compiles corresponding resx locally. Note that editing XML (resx) as text is generally not possible by regular person due to required encoding of some characters - consider technical level of your "end-users" before going that route. Plain text version of source for resource may work in more cases.
Usually this is not the case - if end-user localization is requirement you would create some sort of custom resource string management by loading strings from plain text files or database that users can update locally.

Compare Xamarin.Android CPL localization techniques (.xml .po .mo .resx .xlf)

I have inherited an Xamarin Crossplatform project, (Android only,) that had a 'strings.xml' file with some button-names in it.
Need to find a way to add more languages easily and convert code-strings to translatable too (>300+), not just component-Texts.
I've tried many things so far, but nothing worked as expected: [*]
( Most of the examples and help are for Xamarin.Forms only. )
1.) installed ResX manager
it did not recognized my XML files
created .resx files manually, but those have nothing to do with existing xml-translations
could not get back those texts from C# code I've inserted at the manager window
2.) created a second strings.xml >> placed into values-hu folder >> copied XML content >> translated inside the XML.
It works only for buttons in the IDE placed into the activity
can NOT get text with GetText(...,...) from my C# code because it needs an (int)...I don't know how to generate and pair with my own constants
Resources.Strings... does not pop up any of my own string either
whenever I try to add a new element at the IDE,
I have to search and copy manually the new lines to each XML one by one
there is no "translator window" for them like ResX
can not group strings inside the XML file
3.) installed Multilingual App Toolkit 4.0
seems to be just a different file format than .resx, but same problems
complained about not connected to Azure
offered me a "new english" translation from my original english XML
could not add NEW lines, etc.
4.) installed POEdit + Nuget>GetText
at first sight this seemed to be the perfect solution, but
PoEdit has found only 4 strings in my .cs files
( preferences' I/O strings with GetText() method to read from my config.xml )
could not import string.xml files to translate for 3. lang.
do not understand the .po > .mo conversion concept
installed the nuGet GetText > but no new sub-menu appeared anywhere inside VS.
5.) upgraded to VS2017
6.) asked on a local forum, but nobody answered.
7.) Searched through ca 100 topics here >> ... most of them are about Xamarin Forms ... but those seems to be invalid for droid.
[*] by expected I've imagined having a simple wizard where I can:
go through each string in my *.cs files, where I can give a constant name and it's converting "Really Exit" > to: _tr(Res.Main.really_exit)
or mark to skip
should have a manager to easy translate (like ResX), or ADD new lines!
having both component-texts and code-string inside ONE(/ language?) file
possibly group strings by activity / logic. (So translators can see where is what)
... but nothing seems to be able to handle strings.xml files and .cs file-string all in one easily.
So... Now I am totally confused. I've spent a whole week to see some kind of "order" in this chaos, but could not find a proper writing that explains, WHAT METHOD should someone use to do things easily for droid translation and why? Thank you!
I would go with your second approach because it uses the Android build-in localization system. A benefit of using it is that it already has a fallback-solution included, if a language or a key for one language could not be found.
You can use it in your layout files:
<Button
android:text="#string/LogOn_Login"
or inside code:
var progressDialog = new ProgressDialog(this);
progressDialog.Indeterminate = true;
progressDialog.SetCancelable(false);
progressDialog.SetMessage(GetString(Resource.String.LogOn_ProgressMessage));
But you need to know the difference between an Activity and a Fragment.
In an Activity you just need to call GetString(). Which requires an int, that you get from Resource.String.YOUR_KEY. But in a Fragment you have to give the context. The call changes to Activity.GetString().
New languages or strings can easily added. I usually add new string to the strings.xml inside values-folder first. That way I make sure I have the fallback ready. A new string has the following semantics:
<string name="KEY">VALUE</string>
Filled with real data:
<string name="LogOn_ProgressMessage">Authenticating...</string>
After saving the strings.xml file, it turns out to be good to rebuild the project to make sure the Resource.designer.cs is updated. I sometimes saw the behavior that otherwise my newly added keys where not accessible with Resource.Strings.
When it comes to editing the strings.xml, I am with you that there is no "translator window" and that you have to copy each new key to all supported languages. To overcome this issue we build us a tool that creates all those files for use on every build. This way we support a quite large app with more than 21 languages.
With Xamarin I would go down the .Resx files route. string.xml files are an Android solution and don't fit very well into the .NET world.
How to localize your code is nicely explained here:
https://developer.xamarin.com/guides/xamarin-forms/advanced/localization/
And with Reshaper you can extract all the strings from your code:
https://www.jetbrains.com/resharper/features/internationalization.html
Yes, you will have to convert your XML files. In what format are they? You might be able to use this tool:
http://converter.webtranslateit.com/
To use .NET Resource files inside your Library, you have to add the resources to your project first and configure them like below:
Now you can use them for example like this:
BillManagement.ResourceManager.GetString("TaxSetupWrong")
Or
LibraryName.Resources.BillManagement.TaxSetupWrong

In VS2015 and C# how do you browse source code from Object Browser?

So far the only way to browse base source code in .NET is for me to use Go To Definition from my own source code in my own project. I have to type in the name of a base class/interface/etc and use Go To Definition. But is there any way to do it directly from something like Object Browser that lists them all as included across different assemblies and namespaces. The problem is that Object Browser shows only high level descriptions and it will not get you to the actual source code.
Another question is about the individual source files. Even when VS2015 takes me to the source code, it does not call it a file, just a name of class and [from metadata]. I would like to know how the concept of individual file fits into the groups of assemblies and namespaces. What kind of a database is it built into?

How can I programmatically add content to new/existing executable using c# and possibly make the solution work on a mac?

I've seen a number of variations on this question and im not sure if this question has been completely duplicated.
I would like to be able to at run-time run an existing executable (SOURCE exe) and have it:
1) take an existing TARGET exe at run time and add content of any size and type to the TARGET exe (pdf, image, word, excel file type, etc)
2) be able to run the modified TARGET exe so that when the TARGET exe is run, it will find the embedded content inside of itself and copy the content to the hard drive and then run the program associated with the content (foe example, run excel on a copied xls file)
I've seen examples where you embed resources at compile time in visual studio but I want to do this at run-time in code (c#, java, whatever works). Either the host TARGET exe needs to already exist and content should be added to it OR the exe will need to be generated from scratch at run-time and content again added to it.
I also would prefer not to use any of the cmd-line tools that visual studio or any other tool would run behind the scenes (if possible) to create an exe to minimize the enduser needing to download any more libraries/sdks than necessary.
This product is in line with what i want to do
http://www.boomeranglistbuilder.com/instructions/usingsoftware.php
(I want to improve upon it) :)
Lastly it'd be great if the solution could be cross platform compatible (doubt it though)
Could this be done in java?
I've seen the window library resource method updateresource method mentioned in my searches but I'm not sure if that would completely fit my situation. can anyone comment?
I hope my question is clear. Please let me know.
Any help would be graciously appreciated.
Thank you,
Carlos
I think that it's true for most binary file formats (including the executables), appending data to a well-formed file will not affect the usage of the file, the way it is typically interpreted by most programs. You could, maybe, take advantage of this.
To embed, you'll need to take your (existing) target executable and simply append some binary data to it. That data will have two parts:
A magic word (to denote the presence of an appended resource)
The resource itself.
So, this:
[target executable data]
Becomes this:
[target executable data]
[magic word]
[resource]
To read the resource from the target executable, simply have that executable open itself, search for the magic word and, if it's present, start reading the resource appended after it.
This is what WinRAR does (or at least did four years ago, when I last checked) to recognize the archives inside of its self-extracting files.

c# help needed for application update

Hello guys I think the question i asked in the previous post is unclear OK fine. i am explaining in brief.
for example.
I have a form where i have placed one textbox and command button.
I have fired a event when i click the button the text under the textbox change to "hello" ok fine.
what is my problem is..
the application is created and I published ok.
After some week I thought I want to update my application. where in the place of "hello" I want "hi". I know that we can compile the whole project and publish it.
but I don't want my whole application to be updated.
for example.
What antivirus company do they have a definition file where they only update the definition file not the whole application. after the update it applies to whole application.
I want my application also to do same process like antivirus company do.
You should read that "Hello" from a content file (XML). Then you can just push out the new file.
Use a configuration file. You can add an application.config (or if you're developing a web app, web.config) file to your primary project. Within this configuration file, you can define AppSettings (which are built-in, usually simple and atomic string or number fields that the application will need), ConnectionStrings (which specifically provide information applications will need to connect to a database), or custom configuration sections (used for more complex, related sets of data that are loaded into custom classes you define, such as a basic company profile). Within your code, you access AppSettings by using the static ConfigurationManager.Appsettings[] collection; you tell it the name of the setting you defined in the file, and it returns the value (or null, if it can't find the setting you defined).
Related, but different, is the use of Resource files. Resource files usually contain a dictionary of location-specific data used by the UI, such as text strings, icons and images. Actual resources can be compiled into one big file, or resource files can be a list of paths and filenames to the actual resources. You can use resource files to create different "skins" for your application to be used by different companies by referencing images to use for UI elements, or to translate labels and other text on your application's UI. Resource files are accessed through a ResourceManager; you tell it where the resource file is, and it will load the information into a similar "dictionary"; you then tell it the name of the resource and you get the resource back.
For your specific question, I'll answer the same thing as Henk. But, I think that your real question is "How I do create patch in .NET".
You can check this link:
How can I patch .NET assemblies?
You could design your application to use plugins. This way you only have to update a plugin and not the whole application.
if you want to create a patch for asp.net application , first of all , you have to deploy your project with Web Deployment Project.
then choose Create a separate assembly for each page and control output in output assemblies tab and re-build your solution .
the result of deployment is bunch of DLL which mapped to each page or control.
Now if you changed one page's data (in code behind) , you need to deploy your project again but in this case you can just upload the changed dll file.

Categories

Resources