i have one string, and i assign the value like,
string str="admin" + #"\" + "user";
The output of the "str" value comes as
"admin\\user"
. But i need "str" value as
"admin\user"
.
That means i need single "\" symbol instead of "\\" within the string values. How can i get this?
The output of the "str" value comes as "admin\\user"
No, it really doesn't. The string itself will just have a single backslash.
If you look at it in the debugger you will see the escaping, but that doesn't mean it's part of the string. It's just the debugger representation. Print it to the console, or log etc to see the real value.
I'm sure your string is actually fine.
I am guessing you are looking at the value in the debugger and seeing \\. This is because the debugger is escaping a single \ to \\ to make it clear to you that this is a slash and not a control code.
For example, the debugger shows a tab as \t, so in order to show you a slash followed by the letter t it escapes it to \\t.
If you write this string out to console/log/file, you'll see it is as you expect.
Simply:
String str = #"admin\user"
I don't see where your problem lies... Looks fine to me. - View stuff as the end user, and not in the debugger as Rob suggests.
Related
I am using System.Configuration.ConfigurationManager.AppSettings["path"] to retreive the path where a file is, the value of "path" in App.config is C:\Temp\Config.ini but it returns the \ duplicateC:\\Temp\\Config.ini
I assume this is very easy to solve, but it's getting hard for me to find a solution.
In C#, the backslash character is the escape character. This character is used to include special characters in a string, e.g. newline (\n), tab (\t).
In order to include a backslash in your string, you need to also add the escape character in front of the backslash, so that you need to type \\. If you want to assign the value "C:\Temp\Config.ini" to a variable, you need to type it like this:
var path = "C:\\Temp\\Config.ini";
The value that is shown to you in the debugger also shows the double backslash, but C# will handle this correctly.
For details on escape characters in C#, see this link.
How can you tell that the value has double slash?
Probably what is happening is that the string does have double slash but your viewer is escaping it.
As #Jon Skeet suggested here: Replace "\\" with "\" in a string in C# maybe try to see path.length and count the chars.
Please forgive me a beginner's question :)
string S="abc";
S+="\";
won't complile.
string S="abc";
S+="\\";
will make S="abc\\"
How can I make S="abc\" ?
Your second piece of code is what you want (or a verbatim string literal #"\" as others have suggested), and it only adds a single backslash - print it to the console and you'll see that.
These two pieces of code:
S += "\\";
and
S += #"\";
are exactly equivalent. In both cases, a single backslash is appended1.
I suspect you're getting confused by the debugger view, which escapes backslashes (and some other characters). You can validate that even with the debugger by looking at S.Length, which you'll see is 4 rather than 5.
1 Note that it doesn't change the data in the existing string, but it sets the value of S to refer to a new string which consists of the original with a backslash on the end. String objects in .NET are immutable - but that's a whole other topic...
Try this:
String S = "abc";
S += #"\";
# = verbatim string literal
http://msdn.microsoft.com/en-us/library/aa691090%28v=vs.71%29.aspx
http://msdn.microsoft.com/en-us/library/vstudio/362314fe.aspx
string S = "abs" + "\\";
Should and does result in abc\.
What you are probably seeing is the way the debugger/intellisense visualizes the string for you.
Try printing your string to the console or display it in a textbox.
You already have the solution. The reason it appears as abc\\ whilst debugging is because VS will escape backslashes, print the value of S to a console window and you'll see abc\.
You could add an # to the start of the string literal, e.g.
string S="abc";
S+= #"\";
Which will achieve the same thing.
You can escape the backslash with the # character:
string S="abc";
S += #"\";
But this accomplishes exactly what you've written in your second example. The confusion on this is stemming from the fact that the Visual Studio debugger continues to escape these characters, even though your source string will contain only a single backslash.
Your second example is perfectly fine
string S="abc";
S+="\\";
Visual studio displays string escaped, that's why you see two slashes in result string. If you don't want to use escaping declare string like this
#"\"
This is not compiling because compiler is expecting a character after escape symbol
string S="abc";
S+="\";
string S="abc";
S+="\\";
Console.WriteLine(S); // This is what you're missing ;)
You'll see your string is not wrong at all.
The backslash (\) is an escape character, and allows you to get special characters that you wouldn't normally be able to insert in a string, such as "\r\n", which represents a NewLine character, or "\"" which basically gives you a " character.
In order to get the \ character, you need to input "\\" which is exactly what you're doing and also what you want.
Using the verbatim (#) replaces all occurrences of \ into \\, so #"\" == "\\". This is usually used for paths and regexes, where literal \ are needed in great numbers. Saying #"C:\MyDirectory\MyFile" is more comfortable than "C:\\MyDirectory\\MyFile" after all.
Try this
string s="abc";
s = s+"\\";
I have the following string:
"\\\\AAA.AA.A.AA\\d$\\ivr\\vm\\2012May\\29\\10231_1723221348.vox"
I would like it to look like:
"\\AAA.AA.A.AA\d$\ivr\vm\2012May\29\10231_1723221348.vox"
I have tried
fileToConvert.Replace(#"\\",#"\")
This produces:
"\\AAA.AA.A.AA\\d$\\ivr\\vm\\2012May\\29\\10231_1723221348.vox"
Why?!?
Thanks all!
I'm guessing you are inspecting the result string in the debugger. This string will be escaped, i.e. TAB is \t and return is \n. The "real" value can be inspected by clicking the magnifying glass icon next to the value.
Also, doing a print to terminal (e.g. System.Console.WriteLine()) will show the "correct" value.
I guess you look in the debugger and thats why you get this behaviour...
each \\ is actually one \. thats why you get the \\\\ replaced to \\ (two "\" replaced by one)
and because \\ is actually only one "\" you still gets "\" after the replacement (because it didn't find two "\" string
the reason is that the \ character marks a special character, for example if you want to have tab (\t) character you will have the string "\t" for new line "\r\n".
so when you actually want to have a '\' character in a string you mark it with one more '\' char before - like "\\"
that mean that when you see "\\AAA.AA.A.AA\d$\ivr\vm\2012May\29\10231_1723221348.vox" in the debugger, the actual string is "\AAA.AA.A.AA\d$\ivr\vm\2012May\29\10231_1723221348.vox"
so fileToConvert.Replace(#"\\",#"\") will make it look like this:
"\AAA.AA.A.AA\d$\ivr\vm\2012May\29\10231_1723221348.vox"
which you will see in the debugger as "\\AAA.AA.A.AA\\d$\\ivr\\vm\\2012May\\29\\10231_1723221348.vox"
For a conclusion:
You don't need to do anything - not even fileToConvert.Replace(#"\\",#"\") because your original string (what you see in debug as "\\\\AAA.AA.A.AA\\d$\\ivr\\vm\\2012May\\29\\10231_1723221348.vox") is actually "\\AAA.AA.A.AA\d$\ivr\vm\2012May\29\10231_1723221348.vox"
string s = #"\\\\AAA.AA.A.AA\\d$\\ivr\\vm\\2012May\\29\\10231_1723221348.vox";
var output = s.Replace(#"\\",#"\");
I tried above code code and it works fine.
We have the following code:
string str="\\u5b89\u5fbd\\";
We need output in the format:
"\u5b89\u5fbd\"
We have tried this code:
str.Replace("\\",#"\")
Its not working.
Try this
string str = "\\u5b89\u5fbd\\";
str = str.Replace(#"\\", #"\");
\ is a reserved sign. \\ escapes it and results in \
Adding # at the start of a string tell the compiler to use the string as is and not to escape characters.
So use either "\\\\" or #"\\"
EDIT
\\u5b89\u5fbd\\ actually does not have two \ together. \ is just escaped.
The string results in \u5b89徽\. And in that string you can't replace \\ because there is only one \ together.
Have you tried this?
str.Replace("\\\\","\\");
Your example accomplish nothing. "\\" is an escaped version of \, and #"\" is another version of writing \. So your example replaces \ with \
EDIT
Now I understand your problem. What you want can't actually be done, since that would cause the string to end with a single \, and that will not be allowed. \ denotes a start of a escape sequence, and needs something after it.
I think there are no good option here, since in your case \u5b89 is not a string, but an escape sequence for one specific character.
str.Replace("\\u5b89","\u5b89");
This works for your current example, but will only work with this one specific character, so I guess it wont help you much. The \ at the end you cannot replace with \, but I can't see why you need the string to end with this char either.
Your best bet is to make sure that the \ does not occur at the start of the string in the first place, instead of trying to get rid of it afterwards.
Okay so the first string is actually saved as:
"\u5b89[someChineseCharacter]\"
because you are already using escape sequences. If you would like the original string to be what you typed, you have to do it like so:
string str = #"\\u5b89\u5fbd\\";
Then, str = str.Replace(#"\\",#"\") would work.
Some clarification:
When you type string str="\\u5b89\u5fbd\\"; in visual studio, it saves the string \u5b89徽\ in memory, because you are using several escape sequences in the original statement:
\\ actually means \
\u5fbd actually means unicode character 5fbd, which is 徽.
For that reason, these get replaced, and in memory your string looks as mentioned.
So if you try to replace occurrences of two backslashes #"\\", it will appear to do nothing, because there were no such occurrences in the original string to begin with.
Hope this makes it clear.
Try this it will solve your problem.
str.Replace("\\\\","\\");
Or maybe Something like this?
foreach (char c in str)
{
if ((int)c < 256)
Console.Write(c);
else
Console.Write(String.Format("\\u{0:x4}", (int)c));
}
;)
Maybe it is just me but I think the input string should have a "\" in the middle, or the second u5fbd will be interpreted as a unicode char (so you won't get it outputted as you wish). With a starting string like this:
string str="\\u5b89\\u5fbd\\";
You don't need any replace to output what you want, if for "output" you mean something like Console or an HTML page...
"C://test/test/test.png" -> blub
blub = blub.Replace(#"/", #"\");
result = "C:\\\\test\\test\\test.png"
how does that make sense? It replaces a single / with two \
?
It's actually working:
string blub = "C://test/test/test.png";
string blub2 = blub.Replace(#"/", #"\");
Console.WriteLine(blub);
Console.WriteLine(blub2);
Output:
C://test/test/test.png
C:\\test\test\test.png
BUT viewing the string in the debugger does show the effect you describe (and is how you would write the string literal in code without the #).
I've noticed this before but never found out why the debugger chooses this formatting.
No, it doesn't.
What you're seeing is the properly formatted string according to C# rules, and since the output you're seeing is shown as though you haven't prefixed it with the # character, every backslash is doubled up, because that's what you would have to write if you wanted that string in the first place.
Create a new console app and write the result to the console, and you'll see that the string looks like you wanted it to.
So this is just an artifact of how you look at the string (I assume the debugger).
The \ character in C# is the escape character, so if you are going to use it as a \ character you need two - otherwise the next character gets treated specially (new line etc).
See What character escape sequences are available? (C#)
The character \ is a special character, which changes the meaning of the character after it in string literals. So when you refer to \ itself, it needs to be escaped: \\.
Look up "escape characters".
Its done what it should.
"\\" is the same as #"\"
"\" is an escape character. Without the verbatim indicator "#" before a string a single \ is shown as "\\"
You should think twice before saying something like that....
The string.Replace function is basic functionality that has been around for a long time.... Whenever you find you have a problem with something like that, it's probably not the function that is broken, but your understanding or use of it.