.Net 3.5
I've built into the service exe the ability for it to install itself using a -i feature. I have a custom installer class and am using a common technique on found online here. That installer class basically has it's own service and serviced process installer.
This code has worked well for a very long time. Finally ran into a Win 7 64 bit machine were it refuses to install.
Basically, the log shows it's installing the service and that succeeds. Then it tries to create an event log and that fails with
An exception occurred during the Install phase.
System.ComponentModel.Win32Exception: The specified service already
exists
I just got done having the OS completely reinstalled from scratch, first thing I did was try to install as a service, and it's the same error. Why is it thinking that event log is already there?
I've already read all the other posts and I've browsed my registry and there is nothing in there for my service or event log. I have full admin rights, when I try to open cmd as administrator, it doesn't even prompt me, so as far as I can tell, I am an admin (I can see that in my user profile).
I even added code to check to see if it found the EventLog using System.Diagnostics.EventLog.SourceExists which does report it found it, and so I added a call to System.Diagnostics.EventLog.DeleteEventSource but that doesn't help.
I even tried removing the EventLog installer from the ServiceInstaller, but then it starts failing for other reasons.
Any ideas?
Here is some sample code for an alternate installer I tried that I found here with the same results:
public partial class Service1Installer : Installer
{
public Service1Installer()
{
InitializeComponent();
ServiceProcessInstaller process = new ServiceProcessInstaller();
process.Account = ServiceAccount.LocalSystem;
ServiceInstaller serviceAdmin = new ServiceInstaller();
serviceAdmin.StartType = ServiceStartMode.Manual;
serviceAdmin.ServiceName = "Service1";
serviceAdmin.DisplayName = "Service1";
serviceAdmin.Description = "Service1";
Installers.Add(serviceAdmin);
Installers.Add(process );
}
}
uninstall your service
installutil /u yourproject.exe
restart your machine
http://msdn.microsoft.com/en-us/library/sd8zc8ha(v=vs.80).aspx
let me know if you still have a issue
Use installutil as #MicahArmantrout mentions, if the exe still resides on disk.
Otherwise, open a commandline as Administrator and execute: sc delete "my service name"
In the end, my problem was our internal installer. I commented it out and now just install the service from the command line and it now installs on 64 bit OS. Still don't know why it would work before on 32 bit.
Related
When I run this code under my account in Visual Studio debugger
_alprNet = new AlprNet("eu", "openalpr.conf", "runtime_data");
if (!_alprNet.IsLoaded())
{
Tools.LogError("!!! OpenALPR failed to load.");
It works OK and AlprNet loads.
But when I install the Windows service and start this service I get
"!!! OpenALPR failed to load."
with no additional information.
I have all the DLLs and the runtime_data in the folder where my windows service's exe file is installed, exactly the same way as it is in bin\Debug folder.
How to find the reason why AlprNet failed to load?
In case it is useful for anyone:
This line in OnStart method before creating new AlprNet fixed the problem:
System.IO.Directory.SetCurrentDirectory(System.AppDomain.CurrentDomain.BaseDirectory);
https://stackoverflow.com/a/10385563/2224701
Apparently the non .NET DLLs dependencies could not be solved without this.
So I am trying to create a service using C# in Visual Studio 2017 and I keep getting an error when I try to install it.
Right now, I don't even have anything in my service, I just want to be able to install the service. I created a new Project in Visual Studio 2017 using the Windows Service (.NET Framework) template under Visual C# > Windows Desktop. I then added the installer via Right Click > Add Installer. For serviceProcessInstaller1, I set the account to LocalSystem. And...that's it!
Now, I try to install it. I open up command prompt (run as administrator) and I do
InstallUtil ServiceTest.exe
Things start off smoothly, but then I get a message:
"An exception occured during the Install phase.
System.UnauthorizedAccessException: Attempted to perform an
unauthorized operation."
What could be generating this message?
I've googled and tried the following things:
Ensure I run command prompt as administrator.
Assign Full Control to
the project folder to my admin account.
Configure permissions to Full
Control for admin account in the security log of regedit.
Log into my
computer as an administrator (rather than regular user) and run it
that way.
Despite these things, I keep getting the same error. What else could I be doing wrong? Would really appreciate some advice!
Note: I am trying to install this service locally on my computer.
Edit: Per request, here are the logs. I named my project "FailedService", by the way, since I can't get it to work!
InstallUtil.InstallLog
Running a transacted installation.
Beginning the Install phase of the installation.
See the contents of the log file for the C:\Users\first.m.last\source\repos\FailedService\FailedService\bin\Debug\FailedService.exe assembly's progress.
The file is located at C:\Users\first.m.last\source\repos\FailedService\FailedService\bin\Debug\FailedService.InstallLog.
An exception occurred during the Install phase.
System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
The Rollback phase of the installation is beginning.
See the contents of the log file for the C:\Users\first.m.last\source\repos\FailedService\FailedService\bin\Debug\FailedService.exe assembly's progress.
The file is located at C:\Users\first.m.last\source\repos\FailedService\FailedService\bin\Debug\FailedService.InstallLog.
The Rollback phase completed successfully.
The transacted install has completed.
FailedService.InstallLog
Installing assembly 'C:\Users\first.m.last\source\repos\FailedService\FailedService\bin\Debug\FailedService.exe'.
Affected parameters are:
logtoconsole =
logfile = C:\Users\first.m.last\source\repos\FailedService\FailedService\bin\Debug\FailedService.InstallLog
assemblypath = C:\Users\first.m.last\source\repos\FailedService\FailedService\bin\Debug\FailedService.exe
Installing service Service1...
Creating EventLog source Service1 in log Application...
Rolling back assembly 'C:\Users\first.m.last\source\repos\FailedService\FailedService\bin\Debug\FailedService.exe'.
Affected parameters are:
logtoconsole =
logfile = C:\Users\first.m.last\source\repos\FailedService\FailedService\bin\Debug\FailedService.InstallLog
assemblypath = C:\Users\first.m.last\source\repos\FailedService\FailedService\bin\Debug\FailedService.exe
Restoring event log to previous state for source Service1.
I was FINALLY able to resolve this issue. I was able to get to the bottom of it by using SysInternal's Process Monitor. I opened up the program and had it take logs for InstallUtil.exe. From there, I began to search for any logs that said "Access Denied". As I sorted through them, I noticed something interesting: it was trying to create a registry key, but it kept failing!
So I went into the registry and created a key named "ServiceTest". After that, I ran the InstallUtil command again, and it worked!
If anyone else is having trouble, the solution is to create a key named after your process name in the following location:
HKLM\System\CurrentControlSet\Services\EventLog\Application\
Enter the full path to installUtil & your service binary in an elevated prompt, that could do.
I am trying to run EMC commands in C#. I am running this from my personal PC that has exchange management tools installed on it.
Our exchange servers have 2007 running on them.
The thing is, when I run Powershell or EMC, I need to run as a different user that has exchange server 2007 permissions since my individual profile doesn't have these permissions.
That being said, this is my code I have running on my personal PC:
RunspaceConfiguration config = RunspaceConfiguration.Create();
PSSnapInException snapEx = null;
PSSnapInInfo info = config.AddPSSnapIn("Microsoft.Exchange.Management.Powershell.Admin", out snapEx);
Runspace runspace = RunspaceFactory.CreateRunspace(config);
runspace.Open();
Command createCMD = new Command("Get-Mailbox ID");
Pipeline pipe = runspace.CreatePipeline();
pipe.Commands.Add(createCMD);
Collection<PSObject> results = pipe.Invoke();
The error I am getting is:
The Windows PowerShell snap-in Microsoft.Exchange.Management.Powershell.Admin is not installed on this computer.
I am getting it when I try and add the Microsoft.Exchange.Management.Powershell.Admin snapIn.
I feel this has something to do with my permissions on my individual profile, but I am not entirely sure. If it is true, how do I fix this.
EDIT
The reason I say it sounds like permissions is because I am able to open powershell and add the snapin. However when I run a command such as get-mailboxstatistics myUserId it throws an error saying MyServer\MyStorageGroup does not exist. However, when I shift-rightCLick and run as different user and use the credentials of my exchange admin account, I am able to run these commands.
If an error says it is not installed on your computer, why do you suspect it has something to do with permissions?
As this post suggests, please check if you have installed the 2007 version of the tools, as the Snapin in question is not available on the 2010 version.
Try the following steps:
Open up a powershell editor of your choice and add the PSSnapin there. If it works, the Snapin is available, if not, it is really not installed on your machine.
If it is available try to set your build configuration from x86 to 64bit or vice versa.
Eventually you can install the .dll in question by hand. Referring to this answer from Keith hill you have to issue the following Powershell commands
$snapinPath = 'Microsoft.Exchange.Management.PowerShell.Admin.dll'
C:\Windows\Microsoft.NET\Framework\v2.0.50727\InstallUtil.exe /i $snapinPath
Errors like this are often a 32 bit/64 bit problem. For example, the snapin might be registered as a 32 bit and your C# program is 64 bit or vice versa.
Sometimes you can fix this by running the other version of InstallUtil, e.g.
$snapinPath = 'Microsoft.Exchange.Management.PowerShell.Admin.dll'
C:\Windows\Microsoft.NET\Framework64\v2.0.50727\InstallUtil.exe /i $snapinPath
After fixing that, I think you'll hit another problem with how you're creating the command. You don't specify arguments when creating a command. Instead, you write something like:
Command createCMD = new Command("Get-Mailbox");
createCMD.Parameters.Add(null, "ID");
I need to uninstall a Windows Service I have created, but I get this error using the "Uninstall or change program" program in windows:
Error. An exception occurred while
uninstalling. This exception will be
ignored and the uninstall will
continue. However, the application
might not be fully uninstalled after
the uninstall is complete. -> The
event log source '111 My Service'
cannot be deleted, because it's equal
to the log name.
Then I click "OK" and the program remains listed in the list of installed programs. What is worse, I cannot install a new version of it. The windows installer says that another version of this product is already installed and I should uninstall it first. How do I get rid of this program?
Update Here is what is happening when I run InstallUtil.exe /u command on it.
The uninstall is beginning. See the
contents of the log file for the
C:\MyService.MyService. assembly's progress. The file
is located at
C:\MyService.MyService.InstallLog.
Uninstalling assembly
'C:\MyService.MyService.exe'. Affected
parameters are: logtoconsole =
assemblypath = C:\MyService.exe
logfile =
C:\MyService.MyService.InstallLog
Removing EventLog source 111 My
Service. An exception occurred during
the uninstallation of the
System.Diagnostics.EventLogInstaller
installer.
System.InvalidOperationException: The
event log source '111 My Service'
cannot be deleted, because it's equal
to the log name. An exception occurred
while uninstalling. This exception
will be ignored and the uninstall will
continue. However, the application
might not be fully uninstalle l is
complete.
The uninstall has completed. An
exception occurred while uninstalling.
This exception will be ignored and the
uninstall will continue. However, the
application might not be fully
uninstalle l is complete.
Try to execute next command in cmd:
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\InstallUtil.exe /u "c:\myservice.exe"
The second option is:
sc delete <service name>
After running the line above you can try to remove the service branch as well in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
The accepted answer didn't work for me.
What worked is open regedit in administrator mode and find the service and delete it.
I had the exact same problem (and nothing in the selected answer worked).
Surprisingly, what fixed the problem was (using the standard "Uninstall or change program" or "Programs and Features" windows dialog) right-clicking on the program and choosing repair (this was apparently successful), and then uninstalling.
This just happened to me and the solution above didn't work where you run the InstallUtil.exe or delete the service. I had initially set up my service with the "LocalSystem" security context, and it was installed with that. I later changed the security context to "User" and recompiled the service executable and tried to uninstall the old service. The error messages were coming up that are described here, and once I went and changed the security context back to "LocalSystem" I could fully uninstall.
In other words, you might want to uninstall your old service with the executable it was created with rather than a newer one with possible modifications.
I'm able to successfully uninstall a third-party application via the command line and via a custom Inno Setup installer.
Command line Execution:
MSIEXEC.exe /x {14D74337-01C2-4F8F-B44B-67FC613E5B1F} /qn
Inno Setup Command:
[Run]
Filename: msiexec.exe; Flags: runhidden waituntilterminated;
Parameters: "/x {{14D74337-01C2-4F8F-B44B-67FC613E5B1F} /qn";
StatusMsg: "Uninstalling Service...";
I am also able to uninstall the application programmatically when executing the following C# code in debug mode.
C# Code:
string fileName = "MSIEXEC.exe";
string arguments = "/x {14D74337-01C2-4F8F-B44B-67FC613E5B1F} /qn";
ProcessStartInfo psi = new ProcessStartInfo(fileName, arguments)
{
CreateNoWindow = true,
UseShellExecute = false,
RedirectStandardOutput = true
};
Process process = Process.Start(psi);
string errorMsg = process.StandardOutput.ReadToEnd();
process.WaitForExit();
The same C# code, however, produces the following failure output when run as a compiled, deployed Windows Service:
"This action is only valid for products that are currently installed."
Additional Comments:
The Windows Service which is issuing
the uninstall command is running on
the same machine as the code being
tested in Debug Mode. The Windows
Service is running/logged on as the
Local system account.
I have consulted my application logs
and I have validated that the
executed command arguments are thhe
same in both debug and release mode.
I have consulted the Event Viewer
but it doesn't offer any clues.
Thoughts? Any help would be greatly appreciated. Thanks.
Step 1: Check the MSI error log files
I'm suspicious that your problem is due to running as LocalSystem.
The Local System account is not the same as a normal user account which happens to have admin rights. It has no access to the network, and its interaction with the registry and file system is quite different.
From memory any requests to read/write to your 'home directory' or HKCU under the registry actually go into either the default user profile, or in the case of temp dirs, c:\windows\temp
I've come across similar problems in the past with installation, a customer was using the SYSTEM account to install and this was causing all sorts of permission problems for non-administrative users.
MSI log files aren't really going to help if the application doesn't appear "installed", I'd suggest starting with capturing the output of MSIINV.EXE under the system account, that will get you an "Inventory" of the currently installed programs (or what that user sees installed) http://blogs.msdn.com/brada/archive/2005/06/24/432209.aspx
I think you probably need to go back to the drawing board and see if you really need the windows service to do the uninstall. You'll probably come across all sorts of Vista UAC issues if you haven't already...
Thanks to those offering help. This appears to be a permissions issue. I have updated my service to run under an Administrator account and it was able to successfully uninstall the third-party application. To Orion's point, though the Local System account is a powerful account that has full access to the system -- http://technet.microsoft.com/en-us/library/cc782435.aspx -- it doesn't seem to have the necessary rights to perform the uninstall.
[See additional comments for full story regarding the LocalSystem being able to uninstall application for which it installed.]
This is bizarre. LocalSystem definitely has the privileges to install applications (that's how Windows Update and software deployment in Active Directory work), so it should be able to uninstall as well.
Perhaps the application is initially installed per-user instead of per-machine?
#Paul Lalonde
The app's installer is wrapped within a custom InnoSetup Installer. The InnoSetup installer, in turn, is manually executed by the logged in user. That said, the uninstall is trigged by a service running under the Local System account.
Apparently, you were on to something. I put together a quick test which had the service running under the LocalSystem account install as well as uninstall the application and everything worked flawlessly. You were correct. The LocalSystem account has required uninstall permissions for applications in which it installs. You saved the day. Thanks for the feedback!