Using VS Community 2017. I have tried to create initial migration with error message saying:
Both Entity Framework Core and Entity Framework 6 are installed. The Entity Framework Core tools are running. Use 'EntityFramework\Add-Migration' for Entity Framework 6.
No DbContext was found in assembly 'Test_Project'. Ensure that you're using the correct assembly and that the type is neither abstract nor generic.
... code in my dbcontext:
protected override void OnModelCreating(DbModelBuilder mb)
{
base.OnModelCreating(mb);
mb.Entity<Stuff>().ToTable("Stuff");
}
public DbSet<Stuff> Stuff{ get; set; }
In the Package Manager Console select the project where the DbContext is defined and run the command add-migration initial.
For example:public class SomeContext : DbContext
You have to specify the project name where the DbContext is located. So just right on the Nugget PM Console, type: Add-Migration MigrationName -Project YourProjectName.
Using the nuget package manager, I had installed all the EntityFrameworkCore dependencies, along with the EntityFramework 6 dependency. Visual Studio was using EF Core, when I needed it to be using EF 6. Uninstalling all EF Core dependencies resolved this issue.
When I had this issue, I had just renamed an existing project to "EF", then renamed all namespaces to "EF". What worked for me was I changed the Assembly name to something other than "EF" (Project properties/Application/Assembly Name). I was using VS Community 2019.
Just close the visual studio and restart your project and then write command again. It worked for me twice
I solved the problem by renaming the project, before that it coincided with the name of the solution.
I have multiple DbContexts in a C# project and I'm trying to enable migrations. When I specify the full command, i.e.:
Enable-Migrations -ContextTypeName Models.Account.AccountDetailDbContext
A migrations folder is created, with the configuration class, but I then get a message:
Checking if the context targets an existing database...
And then
The migrations configuration type 'Portal.WebUI.Migrations.Configuration' was not be found in the assembly 'Portal.WebUI'.
Even though it has just created the file, it can't find it.
I have the correct project selected in the Package Manager Console
I have tried the command using -verbose, but it gives no additional information
If I copy the dbcontexts and classes into a new project then it all works, so it must be something in this existing project that is making the migration fail, but I can't tell what it is.
I solved this by adding EntityFrameworkCore\ before Add-Migration, i.e. the final statement was:
EntityFrameworkCore\Add-Migration
After give a name for your new migration.
I faced this problem. My solution:
Exit visual studio
Open your project again on visual studio
Rebuild solution
Then the error removed. And I can run the command.
After you run Enable-Migrations and the Configuration file is created, rebuild the project and run Enable-Migrations -Force again.
I had this problem and it was solved by changing the dropdown box at the top of the Package Manager Console to choose the correct project. You may need to maximise the width of the package manager console to see this box.
I managed to resolve this by uninstalling the EF nuget package and then reinstalling it.
I have stumbled upon this problem, and after endless hours of googling and trial and error, the solution to my specific problem was much easier.
Just make sure you have all your EF related nuget packages up to date.
I tried every answer I could find here, but what ended up working for me was: Select all EF related nuget packages
(In my case)
Microsoft.EntityFrameworkCore.SqlServer
Microsoft.EntityFrameworkCore.Tools
Microsoft.EntityFrameworkCore.Design
EntityFramework
And update them all, into their latest version (In my case)
The issue was that one of the defaults I downloaded of one of these NuGet packages, was outdated and invalid.
Another possible issue worth checking: is your project signed? As I just discovered, this problem can also eventuate if the assembly is signed with a strong name key file. Part of the EntityFramework tool kit is migrate.exe which is called during the migration process. It appears if the assembly is signed, this application can't find the configuration type.
Solution seems to be <Project> → Properties → Signing: untick "Sign the assembly", at least while performing migration tasks. Tick it back when you're done.
I also had this issue because of a spelling mistake in a namespace
I was facing the same issue. What I found was that in my project name, "-" was included as "abc-xyz". I deleted my project and recreated it as "abcxyz" and it worked. Don't rename the project—you have to rename it at every reference. In this case, first uninstall EF and rename it, then install EF again.
I have faced this problem due to version update of EF package. I have solved by reinstalling:
1.Microsoft.EntityFrameworkCore.SqlServer
2.Microsoft.EntityFrameworkCore.Tools
3.Microsoft.EntityFrameworkCore.Design
4.Microsoft.EntityFrameworkCore
The solution is to check the project reference. In my case, I have added Entity Framework and Entity Framework Core references to my project.
To Resolve this I have removed Entity Framework Reference from the project and now EF Core migration commands are working.
using Microsoft.EntityFrameworkCore.SqlServer;
using Microsoft.EntityFrameworkCore.Tools;
using Microsoft.EntityFrameworkCore.Design;
using Microsoft.EntityFrameworkCore;
Then:
Use EntityFramework6\ before Add-Migration for Entity Framework 6.
Like EntityFrameworkCore6\Add-Migration
In this case First, check NuGet packages
Microsoft.EntityFrameworkCore.SqlServer Microsoft.EntityFrameworkCore.Tools Microsoft.EntityFrameworkCore.Design
most probably missing one of the above packages you get an error.
if missing then install and
do migration using
Add-Migration InitialCreate
I have 4 projects :
Toombu.Entities : all models are there
Toombu.DataAccess: Mapping, Repository and ToombuContext
Toombu.Logique : Logic of my application
Toombu.Web : MVC 4 application. With all others DLL.
I tried to enable migration in Toombu.Web but i had this error :
No context type was found in the assembly
How can I enable migration ?
I am surprised that no one mentioned the obvious answer to this question: Entity Framework requires a context before enable-migrations will work. The error message the OP posted suggests that no context was found. Sure, it could be because the package manager console doesn't "see" the context--in which case the accepted answer is a possible solution (another solution is one I suggest, below). But a context must exist in the current project (assembly) before any other solutions will work.
What does it mean to have a context? It means that there must exist a class in your project that inherits from DbContext (in System.Data.Entity). Here is an example:
public class MyDbContext : DbContext
{
public MyDbContext()
{
}
}
Be sure you use
using System.Data.Entity;
before the code above has access to the DbContext class and that you have used NuGet to get Entity Framework 4.1 or later for the current project.
If all along you had a context but the Package Manager Console just doesn't "see" it: In Visual Studio 2013 you don't have to use the -ProjectName switch. Instead, go to the Package Manager Console (it's available in the View | Other Windows list), and look at the two dropdowns that appear at the top of the Package Manager Console dockable window. The first dropdown is for Package Source; the second is for Default Project. If you dropdown the Default Project and select a project in your solution then whatever commands you issue in the Package Manager console will be executed against the selected project.
use -ProjectName option in Package Manager Console:
Enable-Migrations -ProjectName Toombu.DataAccess -StartUpProjectName Toombu.Web -Verbose
Change the default project and choose the startup project from dropdown:
In my case, the NuGet package "Microsoft.EntityFrameworkCore.Tools" was missing
If anyone is still facing this problem. I solved it by using the following command:
Enable-Migrations -ProjectName <YOUR_PROJECT_NAME> -ContextTypeName <YOUR_CONTEXT_NAME>
Don't forget to use the full path to your context name.
You dbcontext is in Toombu.DataAccess So you should enable migrations in Toombu.DataAccess.
I created a Class in the Models directory called: myData with the following code:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Data.Entity;
namespace Vidly.Models
{
public class MyDbContext : DbContext
{
public MyDbContext()
{
}
}
}
rebuilt the app with: control-shift-b
then ran the following in the nuGet Console:
Enable-Migrations -StartUpProjectName Vidly -ContextTypeName Vidly.Models.MyDbContext -Verbose
the Console returned:
Using StartUp project 'Vidly'.
Using NuGet project 'Vidly'.
Checking if the context targets an existing database...
Code First Migrations enabled for project Vidly.
Enable-Migrations -StartUpProjectName Vidly -ContextTypeName Vidly.Models.myData -Verbose
And the FrameWork created a Migrations directory and wrote a Configuration.cs template in there with the following code:
namespace Vidly.Migrations
{
using System;
using System.Data.Entity;
using System.Data.Entity.Migrations;
using System.Linq;
internal sealed class Configuration : DbMigrationsConfiguration<Vidly.Models.MyDbContext>
{
public Configuration()
{
AutomaticMigrationsEnabled = false;
}
protected override void Seed(Vidly.Models.MyDbContext context)
{
// This method will be called after migrating to the latest version.
// You can use the DbSet<T>.AddOrUpdate() helper extension method
// to avoid creating duplicate seed data.
}
}
}
Follow the below steps to resolve the issue
Install-Package EntityFramework-IncludePrerelease
or Install entity framework from Nuget Package Manager
Restart visual studio
After that I was getting "No context type was found in assembly"
To resolve it - This "No context" that mean you need to create class in "Model" folder in your app with suffix like DbContext ... like this AppDbContext. There you need to include some library using System.Data.Entity;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Data.Entity;
namespace Oceans.Models
{
public class MyDbContext:DbContext
{
public MyDbContext()
{
}
}
}
After that run the below command on Package Manager:
Enable-Migrations -ProjectName <YourProjectName> -ContextTypeName <YourContextName>
My Project Name is - MyFirstApp and AppDbContext is inside the Model Folder so path is like
Enable-Migrations -StartUpProjectName MyFirstApp -ContextTypeName MyFirstApp.Models.AppDbContext
In mosh tutorial, individual user account was selected which created a db context in the template.
Also, make sure EntityFramework is installed in the Nuget package manager.
If you use Both Entity Framework 6 and Entity Framework Core are installed. The Entity Framework 6 tools are running.
Use EntityFrameworkCore\Enable-Migrations for Entity Framework Core. same as for add migration and update database.
Thanks for the suggestions, I solved the problem by combining all the solutions here. At first I created the DbContext Model:
public class MyDbContext: DbContext
{
public MyDbContext()
{
}
}
After creating the dbcontext class, I ran the enable-migration command with the project Name: enable-migrations -ProjectName YourProjectName
I had to do a combination of two of the above comments.
Both Setting the Default Project within the Package Manager Console, and also Abhinandan comments of adding the -ContextTypeName variable to my full command. So my command was as follows..
Enable-Migrations -StartUpProjectName RapidDeploy -ContextTypeName RapidDeploy.Models.BloggingContext -Verbose
My Settings::
ProjectName - RapidDeploy
BloggingContext (Class Containing DbContext, file is within Models folder of Main Project)
My problem was link---->
problem1
I solved that problem with one simple command line
Install-Package EntityFramework-IncludePrerelease
After that, i needed to face with one more problem, something like:
"No context type was found in assembly"
I solve this really easy. This "No context" that mean you need to create class in "Model" folder in your app with suffix like DbContext ... like this MyDbContext.
There you need to include some library using System.Data.Entity;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Data.Entity;
namespace Oceans.Models
{
public class MyDbContext:DbContext
{
public MyDbContext()
{
}
}
}
After that,i just needed this command line:
Enable-Migrations -ProjectName <YourProjectName> -ContextTypeName <YourContextName>
I got this problem first:
PM> add-migration first
No migrations configuration type was found in the assembly 'MyProjectName'. (In Visual Studio you can use the Enable-Migrations command from Package Manager Console to add a migrations configuration).
then i tried this:
PM> Enable-Migrations
No context type was found in the assembly 'MyProjectName'.
Then the right command for me :
PM> Enable-Migrations -ProjectName MyProjectName -ContextTypeName MyProjectName.Data.Context
After that i got this error message even though Context inherits from DbContext
The type 'Context' does not inherit from DbContext. The DbMigrationsConfiguration.ContextType property must be set to a type that inherits from DbContext.
Then i Installed
Microsoft.EntityFrameworkCore.Tools
ITS OK NOW but the message is funny. i already tried add migrations at first :D
Both Entity Framework Core and Entity Framework 6 are installed. The Entity Framework Core tools are running. Use 'EntityFramework6\Enable-Migrations' for Entity Framework 6.
Enable-Migrations is obsolete. Use Add-Migration to start using Migrations.
Change the default project to data access
change the default project dropdown in the package manager console to data access and give enable migrations...
Thats all success
Using the Package Manager, you need to re-install Entity Framework:
Uninstall-Package EntityFramework -Force
Then install it for each project:
Install-Package EntityFramework
Then do not forget to restart the studio.
Ensure you are using the same version of Entity Framework across all projects using the NuGet Package Manager.
Recent windows updates may have installed a newer version of Entity Framework into your active project.
Background:
Around 16 Mar 2016, I started getting this error when trying to add migrations to a project where I had already enabled migrations and had successfully done migrations for.
I noticed that around March 10, a new stable version of Entity Framework 6 had been released.
If I specified the -ContextTypeName parameter in the enable-migrations command, I got an error indicating the migrations were already enabled.
Resolution:
1) Tools -> Nuget Package Manager -> Manage Nuget Packages for Solution
2) (Not sure if this step is necessary, but..) I updated my version of the Nuget Package Manager to the latest version. Also, after updating my version of Nuget Package Manager, I had to restart Visual Studio twice before the NuGet Command line would work properly.
3) Tools -> Nuget package Manager -> Manage Nuget Packages for Solution -> Search Installed packages -> Type Entity Framework
a. You may see more than one version of Entity Framework there.
b. Click Manage on each version of Entity Framework and ensure that your projects are using the SAME version of Entity Framework.
Uncheck the version of Entity Framework that you are not using and for the version of Entity Framework you ARE using make sure it is checked across your projects that need it.
Again, as noted in step 2, I had to restart visual studio twice to get the NuGet Package Manager Console to work properly after updating my version of the NuGet Package Manager. I got an error starting the console the first time, and
"exception calling createinstancefrom with 8 arguments could not load file or assembly EntityFramework" when running the enable-migrations command the second time.
Restarting visual studio seemed to resolve those issues, however.
This error getting because of the compiler not getting 'Context' class in your application. So, you can add it manually by Add --> Class and inherit it with 'DbContext' Class
For Example :
public class MyDbContext : DbContext
{
public DbSet<Customer> Customer { get; set; }
public MyDbContext()
{
}
}
I have been getting this same problem. I have even tried above enable migrations even though I have already done. But it keeps giving same error. Then I had to use the force switch to get overcome this problem. I am sure this will help in someone else's case as well as its a possible work around.
After enabling migration with force, you should update your database (Make sure default project is set correctly). Otherwise you will get another problem like explicit migrations are pending.
Then just execute your add-migrations or any other commands, it should work.
Enable-Migrations -ProjectName <PROJECT_NAME> -ContextTypeName <FULL_CONTEXT_NAMESPACE.YOUR_CONTEXT_NAME> -force
Adding a class which inherits DbContext resolved my problem:
public class MyDbContext : DbContext { public MyDbContext() { } }
How to Update table and column in mvc using entity framework code first approach
1: tool > package manager console
2: select current project where context class exist
3: Enable migration using following command
PM > enable-migrations
4: Add migration folder name using following command
PM > add-migration MyMigrationName
4: Now update database following command
PM > update-database
enable-migrations -EnableAutomaticMigration:$false with this command you can enable migration at Ef 6.3 version because C# enable as default migrations at Ef 6.3 version.
I have encountered this problem a few times and in my case I uninstalled EntityFramework nuget package and installed EntityFrameworkCore nuget package, entityFramework.design and entityframework.tools
I got the same error when I had Authentication disabled/chose "No Authentication'. I re-made my project and chose "Individual User Accounts" and I didn't get the error anymore.
When I faced the same problem, I found that I had renamed my project in the solution explorer.
I needed to open the project in notepad and change the old name to new name.
OPs question was for EF5; I had the same problem with EF6, and my experience was quite similar. Multiple answers here reference EntityFrameworkCore, but using that was a huge misdirect for me.
It seems many things can cause the OPs error; I think both jazimov and Sadjad Khazaie presented good solutions that are useful for both EF and EFCore. However, when I had EFCore installed alongside EF6, that actually CAUSED this problem. It seems that my existing EF6 codebase was using EF6 migrations, and with EntityFrameworkCore packages installed, I got the No context type was found in the assembly error because the EFCore add-migration command was running.
When I removed the EntityFrameworkCore packages, the problem went away.
Note: sometimes I got a warning that both EntityFrameworkCore and EntityFramework were installed when I ran add-migration, but not always. One way to be sure: try enable-migrations, which is available with EntityFramework but is not available (or necessary) with EntityFrameworkCore.
Create a File called MyDBContext inside Models Folder
using System.Data.Entity;
namespace VSR.Models
{
public class MyDbContext: DbContext
{
public MyDbContext()
{
}
}
}
Now Try to execute Enable-migrations. It will work.
namespace EntityFrameworkCodeFirst.Module
{
public class MyDbContext: DbContext
{
public MyDbContext()
{
}
}
}
And if you have Multiple project in one solution than you have to use below commands:-
Enable-Migrations -ProjectName EntityFrameworkCodeFirst
Worked for me:
UnInstall-Package EntityFramework
Restart Visual Studio
Install-Package EntityFramework
Build project
I just got on board with EF 5 and am using their code-first migrations tool but I seem to get an error when I try to enable migrations.
I type Enable-Migrations into the package manager console and then it says
No classes deriving from DbContext found in the current project.
Edit the generated Configuration class to specify the context to enable migrations for.
Code First Migrations enabled for project MyApp.MvcUI.
It then creates a Migrations folder and a Configuration class in my MvcUI project. Thing is, my DbContext lives in a class library project called MyApp.Domain. It should be doing all that in that project and should have no problem finding my DbContext.
Oh wow, nevermind. I'm dumb.
In the Nuget package manager console there is a dropdown menu at the top labeled "Default Project:". Make sure you set that to the project you want to run the command against.
Hopefully this helps someone else avoid my embarrassing mistake.
There are actually 3 ways to make Nuget commands run in a specific project:
[Package Manager Console] Set the active project in the dropdown at the top of the console toolwindow
[Package Manager Console] Look for a parameter to specify the project. For some cmdlets I've seen -ProjectName and some use -Project
[Solution Explorer] Right-click the project you want, and use the graphical package manager window (Manage NuGet Packages...).
I created new project and added the newest entity framework to it (version 4.3). I created classes and the context as in previous EF versions. However, during the very first run when the database should be created (in my case it is SQL Server 2005), I'm receiving the following error:
An error occurred while executing the command definition. See the inner exception for details.
With the following inner exception:
Invalid object name 'dbo.__MigrationHistory'.
As I understand, this table is for migrations, but this table does not exist if there is no database. Am I doing something wrong?
More info:
For testing purposes I created only one class:
public class Test
{
[Key]
public int TestId { get; set;}
public string Name {get; set;}
}
public class Context : DbContext
{
public Context() : base("MyConnection")
{
}
public DbSet<Test> Tests { get; set;}
}
UPDATE 1
After some tests I realized that application is throwing unhandled exception from visual studio and break in visual studio. The exception was System.Data.EntityCommandExecutionException. Once I ignored that expection and didn't stop code execution, database was created.
UPDATE 2
After another few hours working with database I found out that playing with Enable-Migrations option and Update-Database from console also is solving that issue. It is creating database before application start and don't break in Visual Studio.
Could you try removing your constructor to make EF use it's default connection string.
public Context() : base("MyConnection")
{
}
Failing that, could you try updating your database from the Package Manager Console to see if you get any further information.
Update-Database -Verbose
Possibly unrelated in your case, but I get the same error when using MvcMiniProfiler 1.9. If you are using it too, make sure EF profiling is turned off by commenting out the line:
//MiniProfilerEF.Initialize();
Within the MiniProfiler App_Start.
For others experiencing a similar issue, I have found that reenabling migrations from the Package Manager Console can help in certain cases. Make sure you have a copy of your Migration configuration before doing this.
Enable-Migrations -Force
...and just to add one more possible answer for all those facing similar problem
(note: this is an open-ended story seems, as there're obviously some bugs still with the migration part)...
This link came closest to what I needed
Error when running Update-Database with EF 4.3
so, you need to do 3 things (in that order - and I'm referring to an existing project):
(all is in PM console)
Make sure that 'default project' in PM Console is set to your desired project (i.e. for larger solutions) - that doesn't necessarily match your startup project! (and closely watch the comments/response in PM as to whether the actions were made on the project you want)
(1) Enable-Migrations -force
(2) Add-Migration Initial
(3) Update-Database -Verbose
...if you still get an exception in PM console
(4) then you might need to 'move' your project into the root
it sounds silly I know, but that was the main problem on my side - I had a bunch of solution folders and any of the above would fail on projects within solution folders. However, once I moved the project to the root, everything worked fine (no more exceptions, with or w/o first-chance exceptions for CLR turned on or off)...
hope this helps somebody
EDIT: if your data model project (EF CF) is a library - then set that project as a 'default project' in PM console - and run all those things above on that project directly (and have migration configuration etc. created in the lib itself). Otherwise it'd fail (and the same no MigrationHistory exception also appears when your model is a lib - and no migration defined for it, within it - and you have migration defined on the 'main project').
EDIT: you'd need to move both the lib (EF model) and the 'startup' project (calling it) into the root.