I'm trying to implement a search as you type (like in iTunes). I am using an ObjectListView. Further, I have a textbox that is used to do the search as shown below:
private void textBoxSearch_TextChanged(object sender, EventArgs e)
{
string txt = textBoxSearch.Text;
TextMatchFilter filter = null;
if (!String.IsNullOrEmpty(txt))
{
filter = TextMatchFilter.Contains(myObjectListView, txt);
}
// Setup a default renderer to draw the filter matches
if (filter == null)
myObjectListView.DefaultRenderer = null;
else
{
myObjectListView.DefaultRenderer = new HighlightTextRenderer(filter);
// Uncomment this line to see how the GDI+ rendering looks
myObjectListView.DefaultRenderer = new HighlightTextRenderer { Filter = filter, UseGdiTextRendering = false };
}
// Some lists have renderers already installed
HighlightTextRenderer highlightingRenderer = myObjectListView.GetColumn(0).Renderer as HighlightTextRenderer;
if (highlightingRenderer != null)
highlightingRenderer.Filter = filter;
myObjectListView.ModelFilter = filter;
}
Can someone figure out why this doesn't work?
The above code is meant to filter search results as the user types in the textbox (Like iTunes does, if you have ever used itunes). Apparently, up to this point, nothing happens. It seems like this code does not even execute.
Per this, the ObjectListView has a property named UseFiltering that is false by default and must be set to true to enable filtering.
Related
I'm using ObjectListView.Official.2.9.1.nupkg
http://objectlistview.sourceforge.net/cs/index.htmlHere is my sample code: C# ObjectListView TreeListView add multi-level NodesCurrently I'm using ModelFilter and the problem was when i perform Collapse, the nodes went missing.Explanation: http://objectlistview.sourceforge.net/cs/filtering.html#filtering-and-treelistviews
private void txtSearchInTable_TextChanged(object sender, EventArgs e)
{
try
{
if (txtSearchInTable.Text == "")
{
this.treeListView1.ResetColumnFiltering();
treeListView1.ExpandAll();
}
else
{
this.treeListView1.ModelFilter = TextMatchFilter.Contains(this.treeListView1, txtSearchInTable.Text);
this.treeListView1.Refresh();
}
}
catch (Exception ex)
{
MessageBox.Show(ex + "", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
}
}
Is there any function for search and highlight text only while keeping everything visible?
Update:
TextMatchFilter filter1 = TextMatchFilter.Contains(treeListView1, txtSearchInTable.Text);
filter1.Columns = new[] { this.olvColumn1, this.olvColumn2, this.olvColumn3, this.olvColumn4 };
treeListView1.DefaultRenderer = new HighlightTextRenderer(filter1);
Using DefaultRenderer it's work, but why only first column "olvColumn1" cannot be highlighted? even I set olvColumn1.Searchable = true;
You can use HighlightTextRenderer to highlight and optionally filter items.
As pointed out by Dialecticus in one of the comments, the first column of a TreeListView (in contrast to ObjectListView) requires special handling.
Quote from here:
On a TreeListView, the DefaultRenderer is used for all columns except the first. The first column is drawn by the TreeColumnRenderer, which has to be an instance of TreeRenderer. TreeRenderer already supports text highlighting. You just need to change the Filter property.
So your code just needs to add a single line to update the Filter property:
TextMatchFilter filter = new TextMatchFilter(this.treeListView1, toolStripTextBox1.Text);
this.treeListView1.DefaultRenderer = new HighlightTextRenderer(filter);
this.treeListView1.TreeColumnRenderer.Filter = filter;
I am having trouble type casting and using the right interfaces. I have a function that loops through all text elements with a specific property set. Once a match is found, I want to be able to select this text element or make it active or highlighted or whatever on the map. Code below.
protected override void OnClick(Item item)
{
IMxDocument pDoc = ValidateInterface.GetMxDocument();
IActiveView pLayout = (IActiveView)pDoc.PageLayout;
IGraphicsContainer pGraphicsCont = (IGraphicsContainer)pDoc.PageLayout;
pGraphicsCont.Reset();
IElementProperties _ElemProps = null;
while ((_ElemProps = (IElementProperties)pGraphicsCont.Next()) != null)
{
if (_ElemProps.CustomProperty is IPropertySet2)
{
ITextElement _textElement = (ITextElement)_ElemProps;
IPropertySet2 _propertySet = (IPropertySet2)_ElemProps.CustomProperty;
MessageBox.Show("Before I compare item to string");
if (item.Caption == Convert.ToString(_propertySet.GetProperty(NAME_STRING)))
{
//Problems start here
MessageBox.Show("Inside the IF statement");
IGraphicsContainerSelect _SelectMyElement = null; // = (IGraphicsContainerSelect)pGraphicsCont;
ITextElement _newTextElement = (ITextElement)pGraphicsCont;
IElement TestElement = _newTextElement as IElement;
_SelectMyElement.SelectElement(TestElement);
}
}
}
}
Nothing is being selected though on my map. I'm looping through each graphic element (IGraphicContainer) on the map. Once I find a match, I want to select that Graphic Element. I am trying to utilize IGraphicContainerSelect to do this. It takes an IElement variable type as a parameter, thus why I'm trying to cast it. But again, noting is being selected. This all happens when I click a button.
Any help on this would be greatly appreciated. Thanks in advance.
Try to refresh your map.
I think the better way using pLayout.PartialRefresh or pScreenDisplay.Invalidate methods.
pLayout.PartialRefresh(esriViewDrawPhase.esriViewGraphicSelection,null,pLayout.Extent)
OR
IScreenDisplay pScreenDisplay = pLayout.ScreenDisplay;
pScreenDisplay.Invalidate(null,false,esriViewGraphicSelection);
pScreenDisplay.UpdateWindow();
See help :http://help.arcgis.com/en/sdk/10.0/arcobjects_net/conceptualhelp/index.html#//000100000242000000
When a user uses the "Insert Link" feature on the RTE to create stories, we get something like...<Item-Name-Of-Story
Instead of taking the Item name I would like to use another field called "Headline"
Does anyone know how to do this?...
Headline-Of-Story
Any help will be much appreciated. Thanks
First of all, you need need to look at this class with Reflector or DotPeek : Sitecore.Shell.Controls.RichTextEditor.InsertLink.InsertLinkForm and to modify it with your own class.
You need to modify just this method,I tested and works fine :
protected override void OnOK(object sender, EventArgs args)
{
Assert.ArgumentNotNull(sender, "sender");
Assert.ArgumentNotNull((object) args, "args");
string displayName;
string text;
if (this.Tabs.Active == 0 || this.Tabs.Active == 2)
{
Item selectionItem = this.InternalLinkTreeview.GetSelectionItem();
if (selectionItem == null)
{
SheerResponse.Alert("Select an item.", new string[0]);
return;
}
else
{
displayName = selectionItem["Headline"];
if (selectionItem.Paths.IsMediaItem)
text = CustomInsertLinkForm.GetMediaUrl(selectionItem);
else if (!selectionItem.Paths.IsContentItem)
{
SheerResponse.Alert("Select either a content item or a media item.", new string[0]);
return;
}
else
{
LinkUrlOptions options = new LinkUrlOptions();
text = LinkManager.GetDynamicUrl(selectionItem, options);
}
}
}
else
{
MediaItem mediaItem = (MediaItem) this.MediaTreeview.GetSelectionItem();
if (mediaItem == null)
{
SheerResponse.Alert("Select a media item.", new string[0]);
return;
}
else
{
displayName = mediaItem.DisplayName;
text = CustomInsertLinkForm.GetMediaUrl((Item) mediaItem);
}
}
if (this.Mode == "webedit")
{
SheerResponse.SetDialogValue(StringUtil.EscapeJavascriptString(text));
base.OnOK(sender, args);
}
else
SheerResponse.Eval("scClose(" + StringUtil.EscapeJavascriptString(text) + "," + StringUtil.EscapeJavascriptString(displayName) + ")");
}
After you modify this class you need to modify next file:
\sitecore\shell\Controls\Rich Text Editor\InsertLink\InsertLink.xml where you need to change codeBeside section
<CodeBeside Type="Sitecore.Shell.Controls.RichTextEditor.InsertLink.InsertLinkForm,Sitecore.Client"/>
with something like :
<CodeBeside Type="YourNameSpace.YourInsertLinkForm,YourAssembly"/>
The simplest way around this would be to type the desired link text, then select this before clicking 'insert link' - this way your hyperlink will have the text of whatever you entered, instead of defaulting to the item name.
If you want to modify how Sitecore renders links in RTE fields, you would need to modify the <renderField> pipeline - if you search for this in the web.config, you will see the different classes involved here. Using dotPeek you can decompile the Sitecore source to see how this works. Potentially you could then create your own renderField pipeline handler to change the link rendering behaviour and then reference this new class in your web.config.
I am having some trouble with getting the formatting to occur correctly. I believe it stems from what is probably incorrect understanding of the events that I am attempting to make the changes in.
any direction would be great
private void so_FetchData(object sender, FetchEventArgs eArgs)
{
if (m_so != null && m_so.Rows.Count > (m_soRowCount + 1))
{
DataRow soDr = m_so.Rows[m_soRowCount++];
if (soDr != null)
{
var compResID = (int) soDr["CompResID"];
var result = (ComplianceLevel) soDr["Result"];
var sectNum = (int) soDr["JobSectType"];
var sectName = soDr["S" + sectNum + "Name"] as string;
var sectTxt = soDr["S" + sectNum + "Text"] as string;
Fields["CompLev"].Value = (result == ComplianceLevel.OtherThanSerious) ? "Other Than Serious" : result.ToString();
m_sectInfo = new SectInfo(sectName, sectTxt);
m_causes = new Causes(compResID);
m_actions = new Actions(compResID);
subReport1.Report = m_sectInfo;
subReport2.Report = m_causes;
subReport3.Report = m_actions;
eArgs.EOF = false;
}
}
else
{
eArgs.EOF = true;
}
}
private void eh_BeforePrint(object sender, EventArgs e)
{
//decide where the bottom border should be draw to
if (m_actions != null && m_actions.ShouldShowBottBorder)
{
subReport3.Border.BottomStyle = BorderLineStyle.ThickSolid;
subReport2.Border.BottomStyle = BorderLineStyle.Solid;
}
else if (m_causes != null && m_causes.ShouldShowBottBorder)
{
subReport2.Border.BottomStyle = BorderLineStyle.ThickSolid;
}
else
{
subReport1.Border.BottomStyle = BorderLineStyle.ThickSolid;
}
}
the issue is that every time I step through the eh_BeforePrint method, the values always equate to false even though I step through the sub reports and the values are properly set. What is happening to cause the bool property to reset to false?
Just changing it if there are any records to print in the Fetch_Data method of each sub report.
private void Causes_FetchData(object sender, FetchEventArgs eArgs)
{
if (m_pos < m_corrs.Count)
{
if (!ShouldShowBottBorder)
ShouldShowBottBorder = true;
//...
}
}
You cannot be assured that the BeforePrint event raises exactly after the corresponding FetchData event. For example, FetchData may fire many times for several records, but due to some keep together logic in the layout engine, it may take several records before ActiveReports knows which page it will commit a section to. Therefore, it is pretty common for FetchData to be raised for several events before the corresponding BeforePrint events are raised.
If I understand your code properly there is a bigger problem though. It appears you are calculating values in your subreports (m_causes and m_actions appear to be actual subreports). If that is the case you cannot reliably calculate values in your subreports and pass them out to the parent report. Instead, you'll need to calculate those values in your parent report. However, usually you can add some shared function to calculate the value and call it from the parent report, and then pass that value into the subreports.
Comment here with some more information if you have specific questions about doing that.
On an unrelated note, you can get a pretty significant performance boost if you change the way you're initializing your subreports. Always initialize your subreports in the ReportStart event and then set their data in the format event of the section containing the Subreport control. This way you initialize each subreport once instead of initializing each subureport for every record. For example:
private void so_ReportStart()
{
subreport1.Report = new SectInfo();
subreport2.Report = new Causes();
subreport3.Report = new Actions();
}
private void Detail_Format()
{ // assuming Detail is the section containing your subreports:
((SectInfo)subreport1.Report).SetParameters(Fields["sectName"].Value, Fields["sectTxt"].Value);
((Causes)subreport2.Report).SetParameters(Fields["compResID"].Value);
((Actions)subreport3.Report).SetParameters(Fields["compResID"].Value);
}
You would setup those "Fields" values in FetchData similar to how your initializing the subreports now. Something like the following:
private void so_FetchData(object sender, FetchEventArgs eArgs)
{
if (m_so != null && m_so.Rows.Count > (m_soRowCount + 1))
{
DataRow soDr = m_so.Rows[m_soRowCount++];
if (soDr != null)
{
var compResID = (int) soDr["CompResID"];
var result = (ComplianceLevel) soDr["Result"];
var sectNum = (int) soDr["JobSectType"];
var sectName = soDr["S" + sectNum + "Name"] as string;
var sectTxt = soDr["S" + sectNum + "Text"] as string;
Fields["CompLev"].Value = (result == ComplianceLevel.OtherThanSerious) ? "Other Than Serious" : result.ToString();
/** BEGIN NEW CODE **/
Fields["sectName"].Value = sectName;
Fields["sectTxt"].Value = sectTxt;
Fields["compResID"].Value = compResId;
/** END NEW CODE **/
/** OLD CODE:
m_sectInfo = new SectInfo(sectName, sectTxt);
m_causes = new Causes(compResID);
m_actions = new Actions(compResID);
subReport1.Report = m_sectInfo;
subReport2.Report = m_causes;
subReport3.Report = m_actions;
**/
eArgs.EOF = false;
}
}
else
{
eArgs.EOF = true;
}
}
To learn more about the events in ActiveReports see the Report Events concepts topic in the ActiveReports Online Help.
To learn more about passing data into Subreports see Subreports with Run-Time Data Sources in the ActiveReports Online Help.
Scott Willeke
GrapeCity inc.
This is kind of a oddball problem so I will try to describe the best that I can.
I have a DataGridView that shows a list of contracts and various pieces of information about them. There are three view modes: Contract Approval, Pre-Production, and Production. Each mode has it's own set of columns that need to be displayed.
What I have been doing is I have three radio buttons one for each contract style. all of them fire their check changed on this function
private void rbContracts_CheckedChanged(object sender, EventArgs e)
{
dgvContracts.Columns.Clear();
if (((RadioButton)sender).Checked == true)
{
if (sender == rbPreProduction)
{
dgvContracts.Columns.AddRange(searchSettings.GetPreProductionColumns());
this.contractsBindingSource.DataMember = "Preproduction";
this.preproductionTableAdapter.Fill(this.searchDialogDataSet.Preproduction);
}
else if (sender == rbProduction)
{
dgvContracts.Columns.AddRange(searchSettings.GetProductionColumns());
this.contractsBindingSource.DataMember = "Production";
this.productionTableAdapter.Fill(this.searchDialogDataSet.Production);
}
else if (sender == rbContracts)
{
dgvContracts.Columns.AddRange(searchSettings.GetContractsColumns());
this.contractsBindingSource.DataMember = "Contracts";
this.contractsTableAdapter.Fill(this.searchDialogDataSet.Contracts);
}
}
}
Here is the GetxxxColumns function
public DataGridViewColumn[] GetPreProductionColumns()
{
this.dgvTxtPreAccount.Visible = DgvTxtPreAccountVisable;
this.dgvTxtPreImpromedAccNum.Visible = DgvTxtPreImpromedAccNumVisable;
this.dgvTxtPreCreateDate.Visible = DgvTxtPreCreateDateVisable;
this.dgvTxtPreCurrentSoftware.Visible = DgvTxtPreCurrentSoftwareVisable;
this.dgvTxtPreConversionRequired.Visible = DgvTxtPreConversionRequiredVisable;
this.dgvTxtPreConversionLevel.Visible = DgvTxtPreConversionLevelVisable;
this.dgvTxtPreProgrammer.Visible = DgvTxtPreProgrammerVisable;
this.dgvCbxPreEdge.Visible = DgvCbxPreEdgeVisable;
this.dgvCbxPreEducationRequired.Visible = DgvCbxPreEducationRequiredVisable;
this.dgvTxtPreTargetMonth.Visible = DgvTxtPreTargetMonthVisable;
this.dgvCbxPreEdgeDatesDate.Visible = DgvCbxPreEdgeDatesDateVisable;
this.dgvTxtPreStartDate.Visible = DgvTxtPreStartDateVisable;
this.dgvTxtPreUserName.Visible = DgvTxtPreUserNameVisable;
this.dgvCbxPreProductionId.Visible = DgvCbxPreProductionIdVisable;
return new System.Windows.Forms.DataGridViewColumn[] {
this.dgvTxtPreAccount,
this.dgvTxtPreImpromedAccNum,
this.dgvTxtPreCreateDate,
this.dgvTxtPreCurrentSoftware,
this.dgvTxtPreConversionRequired,
this.dgvTxtPreConversionLevel,
this.dgvTxtPreProgrammer,
this.dgvCbxPreEdge,
this.dgvCbxPreEducationRequired,
this.dgvTxtPreTargetMonth,
this.dgvCbxPreEdgeDatesDate,
this.dgvTxtPreStartDate,
this.dgvTxtPreUserName,
this.dgvCbxPreProductionId,
this.dgvTxtCmnHold,
this.dgvTxtCmnConcern,
this.dgvTxtCmnAccuracyStatus,
this.dgvTxtCmnEconomicStatus,
this.dgvTxtCmnSoftwareStatus,
this.dgvTxtCmnServiceStatus,
this.dgvTxtCmnHardwareStatus,
this.dgvTxtCmnAncillaryStatus,
this.dgvTxtCmnFlowStatus,
this.dgvTxtCmnImpromedAccountNum,
this.dgvTxtCmnOpportunityId};
}
public DataGridViewColumn[] GetProductionColumns()
{
this.dgvcTxtProAccount.Visible = DgvTxtProAccountVisable;
this.dgvTxtProImpromedAccNum.Visible = DgvTxtProImpromedAccNumVisable;
this.dgvTxtProCreateDate.Visible = DgvTxtProCreateDateVisable;
this.dgvTxtProConvRequired.Visible = DgvTxtProConvRequiredVisable;
this.dgvTxtProEdgeRequired.Visible = DgvTxtProEdgeRequiredVisable;
this.dgvTxtProStartDate.Visible = DgvTxtProStartDateVisable;
this.dgvTxtProHardwareRequired.Visible = DgvTxtProHardwareReqiredVisable;
this.dgvTxtProStandardDate.Visible = DgvTxtProStandardDateVisable;
this.dgvTxtProSystemScheduleDate.Visible = DgvTxtProSystemScheduleDateVisable;
this.dgvTxtProHwSystemCompleteDate.Visible = DgvTxtProHwSystemCompleteDateVisable;
this.dgvTxtProHardwareTechnician.Visible = DgvTxtProHardwareTechnicianVisable;
return new System.Windows.Forms.DataGridViewColumn[] {
this.dgvcTxtProAccount,
this.dgvTxtProImpromedAccNum,
this.dgvTxtProCreateDate,
this.dgvTxtProConvRequired,
this.dgvTxtProEdgeRequired,
this.dgvTxtProStartDate,
this.dgvTxtProHardwareRequired,
this.dgvTxtProStandardDate,
this.dgvTxtProSystemScheduleDate,
this.dgvTxtProHwSystemCompleteDate,
this.dgvTxtProHardwareTechnician,
this.dgvTxtCmnHold,
this.dgvTxtCmnConcern,
this.dgvTxtCmnAccuracyStatus,
this.dgvTxtCmnEconomicStatus,
this.dgvTxtCmnSoftwareStatus,
this.dgvTxtCmnServiceStatus,
this.dgvTxtCmnHardwareStatus,
this.dgvTxtCmnAncillaryStatus,
this.dgvTxtCmnFlowStatus,
this.dgvTxtCmnImpromedAccountNum,
this.dgvTxtCmnOpportunityId};
}
public DataGridViewColumn[] GetContractsColumns()
{
this.dgvTxtConAccount.Visible = this.DgvTxtConAccountVisable;
this.dgvTxtConAccuracyStatus.Visible = this.DgvTxtConAccuracyStatusVisable;
this.dgvTxtConCreateDate.Visible = this.DgvTxtConCreateDateVisable;
this.dgvTxtConEconomicStatus.Visible = this.DgvTxtConEconomicStatusVisable;
this.dgvTxtConHardwareStatus.Visible = this.DgvTxtConHardwareStatusVisable;
this.dgvTxtConImpromedAccNum.Visible = this.DgvTxtConImpromedAccNumVisable;
this.dgvTxtConServiceStatus.Visible = this.DgvTxtConServiceStatusVisable;
this.dgvTxtConSoftwareStatus.Visible = this.DgvTxtConSoftwareStatusVisable;
this.dgvCbxConPreProductionId.Visible = this.DgvCbxConPreProductionIdVisable;
this.dgvCbxConProductionId.Visible = this.DgvCbxConProductionVisable;
return new System.Windows.Forms.DataGridViewColumn[] {
this.dgvTxtConAccount,
this.dgvTxtConImpromedAccNum,
this.dgvTxtConCreateDate,
this.dgvTxtConAccuracyStatus,
this.dgvTxtConEconomicStatus,
this.dgvTxtConSoftwareStatus,
this.dgvTxtConServiceStatus,
this.dgvTxtConHardwareStatus,
this.dgvCbxConPreProductionId,
this.dgvCbxConProductionId,
this.dgvTxtCmnHold,
this.dgvTxtCmnConcern,
this.dgvTxtCmnAccuracyStatus,
this.dgvTxtCmnEconomicStatus,
this.dgvTxtCmnSoftwareStatus,
this.dgvTxtCmnServiceStatus,
this.dgvTxtCmnHardwareStatus,
this.dgvTxtCmnAncillaryStatus,
this.dgvTxtCmnFlowStatus,
this.dgvTxtCmnImpromedAccountNum,
this.dgvTxtCmnOpportunityId};
}
The issue is when I check a button the first time, everything shows up ok. I choose another view, everything is ok. But when I click on the first view the columns are out of order (it is like they are in reverse order but it is not exactly the same). this happens only to the first page you click on, the other two are fine. You can click off and click back on as many times as you want after those initial steps, The first list you selected at the start will be out of order the other two will be correct.
Any ideas on what could be causing this?
EDIT--
Things I have found so far:
ColumnDisplayIndexChanged fires many many times (over 200 times) when I view the first selection a second time. if the function does nothing it still loads the page, if i put a dialog box to show it fired (it was a lot of clicks) eventually i either get a big red X in the data grid view area or it loads fine (depending on the page, I get a X for pre-production but the other two loads fine (the message box still shows up hundreds of times) when you select them first)
My best guess is that this.XXX.Fill is changing the DisplayIndex value if the change is occuring after the column range creation function has returned. There are a few things you could consider however.
Create the range of columns once rather than each time a different view is selected.
Is memory an issue? If the datasets are not large and should not be large in the future you could fill 3 seperate containers and change the binding to a different container rather than refilling a single container everytime.
I think I would at the very least create the column ranges only once rather than each time.
Edit
private DataGridViewColumns[] PreProducitonColumns {get;set;}
private DataGridViewColumns[] ProductionColumns {get;set;}
private DataGridViewColumns[] ContractsColumns {get;set;}
private void Form_Load()
{
this.PreProducitonColumns = searchSettings.GetPreProductionColumns();
this.ProductionColumns = searchSettings.GetProductionColumns();
this.ContractsColumns = searchSettings.GetContractsColumns();
}
private void rbContracts_CheckedChanged(object sender, EventArgs e)
{
dgvContracts.Columns.Clear();
if (((RadioButton)sender).Checked == true)
{
if (sender == rbPreProduction)
{
dgvContracts.Columns.AddRange(PreProducitonColumns);
this.contractsBindingSource.DataMember = "Preproduction";
this.preproductionTableAdapter.Fill(this.searchDialogDataSet.Preproduction);
}
else if (sender == rbProduction)
{
dgvContracts.Columns.AddRange(ProductionColumns);
this.contractsBindingSource.DataMember = "Production";
this.productionTableAdapter.Fill(this.searchDialogDataSet.Production);
}
else if (sender == rbContracts)
{
dgvContracts.Columns.AddRange(ContractsColumns);
this.contractsBindingSource.DataMember = "Contracts";
this.contractsTableAdapter.Fill(this.searchDialogDataSet.Contracts);
}
}
}
I took the easy way out. I just created 3 DataGridView and set them visible based off of the radio button.