I have a console app that checks for changes occurring on the file system. I'm trying to find out if it's possible to get the username of the individual who is doing the changes?
You'd be better off enabling auditing on the folder.
Right-click the folder, go to Properties > Security tab > Advanced > Auditing tab. There are options for recording an audit log of events that happen in that folder.
No, it's not possible, the NTFS or FAT file system which is what Windows uses doesn't record this information. The best you could get about a file is last time it was changed.
You can't do this asynchronously with FileSystemWatcher, however you can do this synchronously using file system filter driver. The driver lets you get the user name of the account performing the operation.
Related
I've been trying to learn how to handle saving normal .txt files in UWP, and have realized that it's quite locked down compared to WPF, especially in the sense of what folders you can access without requesting the user to select a location. I have searched for various ways this might be possible but found no working answer.
Question Description:
I basically would love to know if this is possible, and preferably a point in the direction where I can learn how exactly to do this.
Application settings page requires user to select folder where files are saved.
Application remembers this between launches (unsure if this is possible, but I can't require the user to select the folder on every launch)
Application saves files to the specified folder.
In my understanding, this should be possible, as the user is the one specifying the location via filepicker, but is it possible to have this work between launches so that the user wont be required to re-select the save folder?
I need to figure this out, as I would like my application to support selecting attached network drives, cloud storage folders, etc.
Any help is very much appreciated, and if there are any questions I will answer them to the best of my ability.
Fow this purpose there are two access lists designed: FutureAccessList and MostRecentlyUsedList. Once the user has picked up the folder with the picker, you add it to such list and receive a token, which you save for future purpose in LocalSettings:
ApplicationData.Current.LocalSettings.Values["MyFolder"] = StorageApplicationPermissions.FutureAccessList.Add(pickedFolder);
Then later, once you want to access that folder, you can do it like this:
StorageFolder folder = await StorageApplicationPermissions.FutureAccessList.GetFolderAsync(ApplicationData.Current.LocalSettings.Values["MyFolder"].ToString());
You can't save a StorageFolder or a path to it in settings, hence the UWP app needs permissions to access the folder. Using above access lists solves this problem.
I believe you want to save user settings and keep it somewhere so that next time when they launch the application, they can use the same settings.
Please check out this tutorial from Microsoft, which describes how to do exactly that.
https://msdn.microsoft.com/en-us/library/bb397750(v=vs.110).aspx
I Hope that this is the Correct way of asking this question. first my problem is that i want to know that how many times a specific folder was opened from the time my windows service start's. I don't want to write a desktop application for this purpose because i want it to happen in the background and also later i may want to add some more functionality. So that is why i need to be it a windows service.
is there some kind of OS Event that i can handle during my code, i.e the event is fired when a user open's folder.
If this is not the correct method then please let me know some other method that can help.
That's not possible in C#. You can be notified of changes within a directory and infer from that that the directory was opened--but there are many times when a directory is opened and nothing will be changed. What you're describing is most like a File System Filter Driver.
From What is a File System Filter Driver:
A file system filter driver can filter I/O operations for one or more file systems or file system volumes. Depending on the nature of the driver, filter can mean log, observe, modify, or even prevent.
Writing a filter is relatively easy, considering there are templates that you can use to base your work from. But, they do consist of kernel-mode code meaning they're not written with C# (they are typically written with C) and they are drivers.
for more details: http://msdn.microsoft.com/en-us/library/windows/hardware/ff540382(v=vs.85).aspx
i know we can monitor a particular folder with FileSystemWatcher. with the help of FileSystemWatcher we can save the log which file was deleted. suppose i have windows service which will run all the time and if any user try to delete any file from my OS with specific extension then control then my windows service will show a messge box to user and prevent the user to delete that file. i just want to know can i do this with FileSystemWatcher class. if it is possible with FileSystemWatcher then please discuss here how or if not possible with FileSystemWatcher then how could i make it possible with my win service or normal win apps. would it be possible by win32 api?? . thanks
Use proper Windows security measures - File permissions together with access groups.
The only way is to have a filesystem filter driver which will track deletion and movement request (movement to recycle bin here) and will cancel such requests. You can write your own filter driver or use our CallbackFilter product. With CallbackFilter the task is trivial - less than a dozen of lines of code in user-mode (possibly in C#).
I would like to create a c# application which will open when i open a folder automatically.
My c# application is intended to be like a password system, so that the contents in the folder can only viewed after logging in to my application. Everything is ready..........
but i am confused how to open my application directly while opening the folder with a c# script?
I have now created a application which will ask the user for name and password while opening the application and now i want to make it open through the folder to be locked , how to do it?
Ok, first of all if you want the folder to be secure you should encrypt it otherwise all the user has to do to gain access is kill the process.
What i would recommend you do instead is create a encrypted file. For example a zip file. Then all you have to do associate the file with the program and to unpack it with the password. Then when the user is done delete it and overwrite the temporary folder. It's really important that you overwrite it otherwise the encryption is useless.
If you want to avoid conflict with other programs that work with zip files you can make your own file type it does not affect the content of the file in any way.
I hope this helps.
To make sure I understand... you want to build an application that will, when someone tries to open it, will only open after they supply a password. Hmmm... okay. A specific folder, or any folder? Local folders or folders on network shares? I initially was thinking a file system watcher approach, but that will only work on change events, like copying, renaming, deleting, etc. So that won't work. The closest would be to check last accessed time, but that is an alert ex post facto, so this must be rejected. I'm not sure how you could do this in C#. What is wrong with the robust security options MS has already established, like global groups. That provides flexible restrictions on access. Especially over large amounts of folders. Are users going to have one password per folder? Too cumbersome. One password per user? Use Windows authentication to lock it down. How is this app storing the passwords?
I recommend trying to leverage existing technology to solve problems before trying to re-invent the wheel. You have omitted the scope of this, and what you have already attempted, so we may not understand completely.
I need to store log files and configuration files for my application. Where is the best place to store them?
Right now, I'm just using the current directory, which ends up putting them in the Program Files directory where my program lives.
The log files will probably be accessed by the user somewhat regularly, so %APPDATA% seems a little hard to get to.
Is a directory under %USERPROFILE%\My Documents the best? It needs to work for all versions of Windows, from 2000 forward.
If you're not using ConfigurationManager to manage your application and user settings, you should be. The configuration toolkit in the .NET Framework is remarkably well thought out, and the Visual Studio tools that interoperate with it are too.
The default behavior of ConfigurationManager puts both invariant (application) and modifiable (user) settings in the right places: the application settings go in the application folder, and the user settings go in System.Environment.SpecialFolder.LocalApplicationData. It works properly under all versions of Windows that support .NET.
As for log files, System.Environment.SpecialFolder.LocalApplicationData is generally the place that you want to put them, because it's guaranteed to be user-writeable.
There are certainly cases where you wouldn't - for instance, if you want to write files to a network share so that you easily can access them remotely. There's a pretty wide range of ways to implement that, but most of them start with creating an application setting that contains the path to the shared folder. All of them involve administration.
I have a couple of complaints about ConfigurationManager and the VS tools: there needs to be better high-level documentation than there is, and better documentation of the VS-generated Settings class. The mechanism by which the app.config file turns into the application configuration file in the target build directory is opaque (and the source of one of the most frequently asked questions of all: "what happened to my connection string?"). And if there's a way of creating settings that don't have default values, I haven't found it.
Note: You can get the path to the LocalApplicationData folder in .NET by using the following function:
string strPath=System.Environment.GetFolderPath(System.Environment.SpecialFolder.LocalApplicationData);
For application settings - use System.Environment.SpecialFolder.ApplicationData - this is where a roaming profile data is stored, so it allows your user to log and work from different machines in the domain.
For log files - System.Environment.SpecialFolder.LocalApplicationData
The accepted answer notes that for log files the following is a good spot.
System.Environment.SpecialFolder.LocalApplicationData This equates to a path of C:\Users\[User]\AppData\Roaming which you can see is user specific. Like the accepted answer mentions this is a guaranteed user-writeable location and can be useful for certain situations
However in a web application environment you may be running your application under a network account and you or a coworker may need to try and track down where exactly those logs are going per application. I personally like to use the non user specific location enumeration of
System.Environment.SpecialFolder.CommonApplicationData which equates to C:\ProgramData. Yes, you will need to specify access rights for any folders you create, but it's usually a one time deal and then all of your application logs can live in one happy location.
Additionally, while looking around the Internet, there is a project out there to programatically set write access to folders you create within CommonApplicationData, Allow write/modify access to CommonApplicationData.
To be honest %appdata% is still the best place to place your config files and log files, as it serves the purpose of a placeholder to store your application data. It should not be that hard to access, just write %appdata% in explorer and you will be directed straight to your %appdata% directory.
Do not store config files in the application folder, Microsoft has stated this is NOT the ideal location. Windows has been moving towards blocking writing to C:\Program Files\ and you'll find in Vista any application that tries to write here, will fire up a UAC warning.
Windows 7 will allow users to customize what UAC popups they use (expect some power users to block most of them) and your app will fail/freeze if the user never approves this write attempt.
If you use the proper userprofile and appdata variables, then Win 2000, XP, Vista, and Win7 will map the data to the proper write friendly folder, with no UAC popups.
You can use SHGetSpecialFolderPath:
int MAX_PATH = 255;
CString m_strMyPath;
SHGetSpecialFolderPath(NULL, m_strMyPath.GetBuffer(MAX_PATH), CSIDL_COMMON_APPDATA, TRUE);
This will specify the 'special folder path' which you can safely write logs to for windows:
For XP: C:\Documents and Settings\All Users\Application Data
For Vista: C:\ProgramData
Check the MSDN page here: http://msdn.microsoft.com/en-us/library/bb762204(VS.85).aspx
The best answer depends on the nature of the logs and configurations. If they are program-wide, and don't need to survive uninstallation of the application, then I think they're fine where they are. If the logs and configurations are user specific, or need to survive uninstallation, then they belong somewhere under %USERPROFILE% - %APPDATA% being the 'proper' base directory for this type of thing.
I use the Isolation Storage for configuration. You can also use the Temp folder to store temporary information like log.