Im working on a little ATM program and I'm stuck on a StreamWritter problem.
On load, my program must use a StreamReader to read in 4 .txt files all located in my bin/debug. Then the user is asked to either Deposit or Withdraw money from the bank accounts located in the .txt files. Everything works fine for the StreamReader which loads all the bank accounts on program loading and for the StreamWriter to write the changes in the .txt files when I add/remove money.
My problem is when I close the program, the loading of the files works just fine but I can't write in the files anymore. My StreamWriter jumps straight to the Catch part and cannot be instantiated. How is that possible if it worked just fine on first use.
Heres the StreamReader Code :
public bool ReadSavingAccount()
{
string strLine;
string[] strArray;
char[] charArray = new char[] { ',' };
FileStream aFile;
StreamReader sr;
try
{
aFile = new FileStream("mySavingAccount.txt", FileMode.Open);
sr = new StreamReader(aFile);
strLine = sr.ReadLine();
while (strLine != null)
{
strArray = strLine.Split(charArray);
Savings monSave = new Savings(strArray[0], Convert.ToDouble(strArray[1]));
mySavingAccount.Add(monSave);
strLine = sr.ReadLine();
}
sr.Close();
aFile.Close();
}
catch
{
return false;
}
return true;
}
And the StreamWrite Code:
public bool WriteSavingAccount()
{
FileStream aFile;
StreamWriter sw;
string myString;
try
{
aFile = new FileStream("mySavingAccount.txt", FileMode.Create);
sw = new StreamWriter(aFile);
}
catch
{
return false;
}
foreach (Savings mySave in mySavingAccount)
{
myString = mySave.AccountNumber + "," + mySave.AccountBalance;
sw.WriteLine(myString);
}
sw.Close();
return true;
}
Any idea what the problem could be ?
Thanks in advance and let me know if you need any other parts of the code.
Try adding a second parameter of boolean to your StreamWriter call. This is the append parameter. True to append to the file, false to overwrite it.
sw = new StreamWriter(aFile, false);
Create your StreamWriter in a using statement to ensure it is closed properly.
Related
I am trying to write from a .csv file to a new file.
Every time StreamWriter writes, it writes to the first line of the new file. It then overwrites that line with the next string, and continues to do so until StreamReader reaches EndOfStream.
Has anybody ever experienced this? How did you overcome it?
This is my first solution outside of those required in by my school work. There is an unknown number of rows in the original file. Each row of the .csv file has only 17 columns. I need to write only three of them and in the order found in the code snippet below.
Before coding the StreamWriter I used Console.WriteLine() to make sure that each line was in the correct order.
Here is the code snippet:
{
string path = # "c:\directory\file.csv";
string newPath = # "c:\directory\newFile.csv"
using(FileStream fs = new FileStream(path, FileMode.Open))
{
using(StreamReader sr = new StreamReader(fs))
{
string line;
string[] columns;
while ((line = sr.ReadLine()) != null)
{
columns = line.Split(',');
using(FileStream aFStream = new FileStream(
newPath,
FileMode.OpenOrCreate,
FileAccess.ReadWrite))
using(StreamWriter sw = new StreamWriter(aFStream))
{
sw.WriteLine(columns[13] + ',' + columns[10] + ',' + columns[16]);
sw.Flush();
sw.WriteLine(sw.NewLine);
}
}
}
}
}
You should open the target in the same scope as you are opening the source instead of doing so in the loop which will cause you to overwrite the file every time with the FileMode option OpenOrCreate.
var path = #"c:\directory\file.csv";
var newPath = #"c:\directory\newFile.csv"
using(var sr = new StreamReader(new FileStream(path, FileMode.Open)))
using(var sw = new StreamWriter(new FileStream(newPath, FileMode.OpenOrCreate, FileAccess.ReadWrite)))
{
while(!sr.EndOfStream)
{
string line = sr.ReadLine();
var columns = line.Split(',');
sw.WriteLine(columns[13] + ',' + columns[10] + ',' + columns[16]);
sw.WriteLine(sw.NewLine);
}
sw.Flush();
}
I also hope you are sure about your CSV spacing as you are hard coding the positions in your code.
To correctly fix your code, you'll want to structure more:
public void CopyFileContentToLog()
{
var document = ReadByLine();
WriteToFile(document);
}
public IEnumerable<string> ReadByLine()
{
string line;
using(StreamReader reader = File.OpenText(...))
while ((line = reader.ReadLine()) != null)
yield return line;
}
public void WriteToFile(IEnumerable<string> contents)
{
using(StreamWriter writer = new StreamWriter(...))
{
foreach(var line in contents)
writer.WriteLine(line);
writer.Flush();
}
}
You could obviously tailor and make it a bit more flexible. But this should demonstrate and resolve some of the issues you have with your loop and streams.
First off, you are creating and closing a write stream to the same file for every single line. This means the file gets overwritten every line. You want to take your using block outside of the while loop; however, if you insist on opening and closing the write stream for every single line, then you need to use FileMode.Append
{
string path=#"c:\directory\file.csv";
string newPath=#"c:\directory\newFile.csv"
using(StreamReader sr = new StreamReader(new FileStream(path, FileMode.Open))) // no need for 2 usings
using (FileStream aFStream = new FileStream (newPath, FileMode.OpenOrCreate, FileAccess.ReadWrite))
{
string line;
string[] columns;
{
while((line = sr.ReadLine()) != null)
{
columns = line.Split(',');
using (StreamWriter sw = new StreamWriter(aFStream))
{
sw.WriteLine(columns[13] + ',' + columns[10] + ',' + columns[16]);
sw.Flush();
sw.WriteLine(sw.NewLine);
}
}
}
}
}
I am doing a project Windows form for assignment in Uni, I want to search an already created text file to match a first name and last name then write some additional information if the name and last name exist. I have the code constructed and showing no errors, however when I run and attempt to add information I am being provided with an error which essentially says the next process (Streamreader writer can not access the file as it is already in use by another process) I assume this process is streamreader, I have tried to code it to stop reading to no avail. I am in my first 3 months learning coding and would appreciate some assistance if possible, I have put a snippet of my code below.
//check if there is a file with that name
if (File.Exists(sFile))
{
using (StreamReader sr = new StreamReader(sFile))
{
//while there is more data to read
while (sr.Peek() != -1)
{
//read first name and last name
sFirstName = sr.ReadLine();
sLastName = sr.ReadLine();
}
{
//does this name match?
if (sFirstName + sLastName == txtSearchName.Text)
sr.Close();
}
//Process write to file
using (StreamWriter sw = new StreamWriter(sFile, true))
{
sw.WriteLine("First Name:" + sFirstName);
sw.WriteLine("Last Name:" + sLastName);
sw.WriteLine("Gender:" + sGender);
}
You are using your writer inside the reader, using the same file.
A using disposes the object inside it, after the closing curly braces.
using(StreamReader reader = new StreamReader("foo")){
//... some stuff
using(Streamwriter writer = new StreamWriter("foo")){
}
}
Do it like so :
using(StreamReader reader = new StreamReader("foo")){
//... some stuff
}
using(Streamwriter writer = new StreamWriter("foo")){
}
As per my comment regarding the using statement.
Rearrange to the below. I've tested locally and it seems to work.
using (StreamReader sr = new StreamReader(sfile))
{
//while there is more data to read
while (sr.Peek() != -1)
{
//read first name and last name
sFirstName = sr.ReadLine();
sLastName = sr.ReadLine();
//does this name match?
if (sFirstName + sLastName == txtSearchName.Text)
break;
}
}
using (StreamWriter sw = new StreamWriter(sfile, true))
{
sw.WriteLine("First Name:" + sFirstName);
sw.WriteLine("Last Name:" + sLastName);
sw.WriteLine("Gender:" + sGender);
}
I've replaced the sr.Close with a break statement to exit out. Closing the reader causes the subsequent peek to error as it's closed.
Also, I've noticed that you are not setting gender? unless its set elsewhere.
hope that helps
You can use FileStream. It gives you many options to work with file:
var fileStream = new FileStream("FileName", FileMode.Open,
FileAccess.Write, FileShare.ReadWrite);
var fileStream = new FileStream("fileName", FileMode.Open,
FileAccess.ReadWrite, FileShare.ReadWrite);
I think this is what you want/need. You can't append to a file the way you are trying to do it. Instead you'll want to read your input file, and write a temp file as you are reading through. And, whenever your line matches your requirements, then you can write the line with your modifications.
string inputFile = "C:\\temp\\StreamWriterSample.txt";
string tempFile = "C:\\temp\\StreamWriterSampleTemp.txt";
using (StreamWriter sw = new StreamWriter(tempFile))//get a writer ready
{
using (StreamReader sr = new StreamReader(inputFile))//get a reader ready
{
string currentLine = string.Empty;
while ((currentLine = sr.ReadLine()) != null)
{
if (currentLine.Contains("Clients"))
{
sw.WriteLine(currentLine + " modified");
}
else
{
sw.WriteLine(currentLine);
}
}
}
}
//now lets crush the old file with the new file
File.Copy(tempFile, inputFile, true);
I have two blocks of code that I've tried using for reading data out of a file-stream in C#. My overall goal here is to try and read each line of text into a list of strings, but they are all being read into a single string (when opened with read+write access together)...
I am noticing that the first block of code correctly reads in all of my carriage returns and line-feeds, and the other ignores them. I am not sure what is really going on here. I open up the streams in two different ways, but that shouldn't really matter right? Well, in any case here is the first block of code (that correctly reads-in my white-space characters):
StreamReader sr = null;
StreamWriter sw = null;
FileStream fs = null;
List<string> content = new List<string>();
List<string> actual = new List<string>();
string line = string.Empty;
// first, open up the file for reading
fs = File.OpenRead(path);
sr = new StreamReader(fs);
// read-in the entire file line-by-line
while(!string.IsNullOrEmpty((line = sr.ReadLine())))
{
content.Add(line);
}
sr.Close();
Now, here is the block of code that ignores all of the white-space characters (i.e. line-feed, carriage-return) and reads my entire file in one line.
StreamReader sr = null;
StreamWriter sw = null;
FileStream fs = null;
List<string> content = new List<string>();
List<string> actual = new List<string>();
string line = string.Empty;
// first, open up the file for reading/writing
fs = File.Open(path, FileMode.Open);
sr = new StreamReader(fs);
// read-in the entire file line-by-line
while(!string.IsNullOrEmpty((line = sr.ReadLine())))
{
content.Add(line);
}
sr.Close();
Why does Open cause all data to be read as a single line, and OpenRead works correctly (reads data as multiple lines)?
UPDATE 1
I have been asked to provide the text of the file that reproduces the problem. So here it is below (make sure that CR+LF is at the end of each line!! I am not sure if that will get pasted here!)
;$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
;$$$$$$$$$ $$$$$$$
;$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
;
;
;
UPDATE 2
An exact block of code that reproduces the problem (using the text above for the file). In this case I am actually seeing the problem WITHOUT trying Open and only using OpenRead.
StreamReader sr = null;
StreamWriter sw = null;
FileStream fs = null;
List<string> content = new List<string>();
List<string> actual = new List<string>();
string line = string.Empty;
try
{
// first, open up the file for reading/writing
fs = File.OpenRead(path);
sr = new StreamReader(fs);
// read-in the entire file line-by-line
while(!string.IsNullOrEmpty((line = sr.ReadLine())))
{
content.Add(line);
}
sr.Close();
// now, erase the contents of the file
File.WriteAllText(path, string.Empty);
// make sure that the contents of the file have been erased
fs = File.OpenRead(path);
sr = new StreamReader(fs);
if (!string.IsNullOrEmpty(line = sr.ReadLine()))
{
Trace.WriteLine("Failed: Could not erase the contents of the file.");
Assert.Fail();
}
else
{
Trace.WriteLine("Passed: Successfully erased the contents of the file.");
}
// now, attempt to over-write the contents of the file
fs.Close();
fs = File.OpenWrite(path);
sw = new StreamWriter(fs);
foreach(var l in content)
{
sw.Write(l);
}
// read back the over-written contents of the file
fs.Close();
fs = File.OpenRead(path);
sr = new StreamReader(fs);
while (!string.IsNullOrEmpty((line = sr.ReadLine())))
{
actual.Add(line);
}
// make sure the contents of the file are correct
if(content.SequenceEqual(actual))
{
Trace.WriteLine("Passed: The contents that were over-written are correct!");
}
else
{
Trace.WriteLine("Failed: The contents that were over-written are not correct!");
}
}
finally
{
// close out all the streams
fs.Close();
// finish-up with a message
Trace.WriteLine("Finished running the overwrite-file test.");
}
Your new file generated by
foreach(var l in content)
{
sw.Write(l);
}
does not contain end-of-line characters because end-of-line characters are not included in content.
As #DaveKidder points out in this thread over here, the spec for StreamReader.ReadLine specifically says that the resulting line does not include end of line.
When you do
while(!string.IsNullOrEmpty((line = sr.ReadLine())))
{
content.Add(line);
}
sr.Close();
You are losing end of line characters.
What I have:
A large XML file # nearly 1 million lines worth of content. Example of content:
<etc35yh3 etc="numbers" etc234="a" etc345="date"><something><some more something></some more something></something></etc123>
<etc123 etc="numbers" etc234="a" etc345="date"><something><some more something></some more something></something></etc123>
<etc15y etc="numbers" etc234="a" etc345="date"><something><some more something></some more something></something></etc123>
^ repeat that by 900k or so lines (content changing of course)
What I need:
Search the XML file for "<etc123". Once found move (write) that line along with all lines below it to a separate XML file.
Would it be advisable to use a method such as File.ReadAllLines for the search portion? What would you all recommend for the writing portion. Line by line is not an option as far as I can tell as it would take much too long.
To quite literaly discard the content above your search string, I would not use File.ReadAllLines, as it would load the entire file into memory. Try File.Open and wrap it in a StreamReader. Loop on StreamReader.ReadLine, then start writing to a new StreamWriter, or do a byte copy on the underlying filestream.
An example of how to do so with StreamWriter/StreamReader alone is listed below.
//load the input file
//open with read and sharing
using (FileStream fsInput = new FileStream("input.txt",
FileMode.Open, FileAccess.Read, FileShare.Read))
{
//use streamreader to search for start
var srInput = new StreamReader(fsInput);
string searchString = "two";
string cSearch = null;
bool found = false;
while ((cSearch = srInput.ReadLine()) != null)
{
if (cSearch.StartsWith(searchString, StringComparison.CurrentCultureIgnoreCase)
{
found = true;
break;
}
}
if (!found)
throw new Exception("Searched string not found.");
//we have the data, write to a new file
using (StreamWriter sw = new StreamWriter(
new FileStream("out.txt", FileMode.OpenOrCreate, //create or overwrite
FileAccess.Write, FileShare.None))) // write only, no sharing
{
//write the line that we found in the search
sw.WriteLine(cSearch);
string cline = null;
while ((cline = srInput.ReadLine()) != null)
sw.WriteLine(cline);
}
}
//both files are closed and complete
You can copy with LINQ2XML
XElement doc=XElement.Load("yourXML.xml");
XDocument newDoc=new XDocument();
foreach(XElement elm in doc.DescendantsAndSelf("etc123"))
{
newDoc.Add(elm);
}
newDoc.Save("yourOutputXML.xml");
You could do one line at a time... Would not use read to end if checking contents of each line.
FileInfo file = new FileInfo("MyHugeXML.xml");
FileInfo outFile = new FileInfo("ResultFile.xml");
using(FileStream write = outFile.Create())
using(StreamReader sr = file.OpenRead())
{
bool foundit = false;
string line;
while((line = sr.ReadLine()) != null)
{
if(foundit)
{
write.WriteLine(line);
}
else if (line.Contains("<etc123"))
{
foundit = true;
}
}
}
Please note, this method may not produce valid XML, given your requirements.
I have this code:
string s = "آ";
StreamWriter writer = new StreamWriter("a.txt", false, Encoding.UTF8);
writer.WriteLine(s);
but when I run it I can't see any "آ" in a.txt!! There isn't any string in a.txt! It is Empty! What is problem!?! Can anyone help me???
You never Close() the StreamWriter.
If you call writer.Close() when you finish writing, you will see the character.
But, since it implements IDisposable you should wrap the creation of the StreamWriter in a using statement:
using(StreamWriter writer = new StreamWriter("a.txt", false, Encoding.UTF8))
{
writer.WriteLine(s);
}
This will close the stream for you.
By the looks of it you're not Flush()ing or Close()ing the StreamWriter before you end your application. StreamWriter uses a buffer internally which needs to be flushed before you close your application or the StreamWriter goes out of scope otherwise the data you wrote to it will not be written to disc.
You can call Close() once you're done - although instead I would suggest using a using statement instead to also assure that your StreamWriter gets properly disposed.
string s = "آ";
using (StreamWriter writer = new StreamWriter("a.txt", false, Encoding.UTF8))
{
writer.WriteLine(s);
}
Try using File.WriteAllText("a.txt", s, Encoding.UTF8);.
Few tips:
do you see any character in the file written in place of one you expect? If not you're not flushing and closing the stream
StreamWriter should be able to write unicode without you having to choose encoding, but you could try to use UTF32 encoding.
Check How to: Write Text to a File
Follow, complete function for export a listview to excel with correct special characteres:
private void Exportar()
{
Encoding encoding = Encoding.UTF8;
saveFileDialog1.Filter = "Arquivo Excel (*.xls)|*.xls";
saveFileDialog1.FileName = "logs";
saveFileDialog1.Title = "Exportar para Excel";
StringBuilder sb = new StringBuilder();
foreach (ColumnHeader ch in lstPesquisa.Columns)
{
sb.Append(ch.Text + "\t");
}
sb.AppendLine();
foreach (ListViewItem lvi in lstPesquisa.Items)
{
foreach (ListViewItem.ListViewSubItem lvs in lvi.SubItems)
{
if (lvs.Text.Trim() == string.Empty)
{
sb.Append(" ");
}
else
{
string ITEM = Regex.Replace(lvs.Text, #"\t|\n|\r", "");//remover novas linhas
sb.Append(ITEM + "\t");
}
}
sb.AppendLine();
}
DialogResult dr = saveFileDialog1.ShowDialog();
if (dr == DialogResult.OK)
{
StreamWriter sw = new StreamWriter(saveFileDialog1.FileName, false, Encoding.UTF32);
sw.Write(sb.ToString());
sw.Close();
}
}
If you want to read a file from somewhere that contains these Unicode characters then you do some modifications and write back to the file, the problem arises. I was stuck with the same problem. Here is the solution that worked for me
Reading data from a file that contains Unicode characters
List<string>fileData= File.ReadAllLines("URPath",Encoding.Default).ToList());
//Any modifications
File.WriteAllLines("URPath", hstFileData,Encoding.Default);
I know this is not pretty but it worked.
hope this helps!