Develop Reference

ListView with rounded corners in windows form

I want to round the corners of the ListView. I can do it on the button so i used the same solution in listview. It seems listview paint event overridden by different methods.
public class RoundListView : ListView
{
private int borderSize = 10;
private int borderRadius = 20;
private Color borderColor = Color.Gray;
private GraphicsPath GetFigurePath(Rectangle rect, float radius)
{
GraphicsPath path = new GraphicsPath();
float curveSize = radius * 2F;
path.StartFigure();
path.AddArc(rect.X, rect.Y, curveSize, curveSize, 180, 90);
path.AddArc(rect.Right - curveSize, rect.Y, curveSize, curveSize, 270, 90);
path.AddArc(rect.Right - curveSize, rect.Bottom - curveSize, curveSize, curveSize, 0, 90);
path.AddArc(rect.X, rect.Bottom - curveSize, curveSize, curveSize, 90, 90);
path.CloseFigure();
return path;
}
protected override void OnPaint(PaintEventArgs pevent)
{
base.OnPaint(pevent);
Rectangle rectSurface = this.ClientRectangle;
Rectangle rectBorder = Rectangle.Inflate(rectSurface, -borderSize, -borderSize);
int smoothSize = 2;
using (GraphicsPath pathSurface = GetFigurePath(rectSurface, borderRadius))
using (GraphicsPath pathBorder = GetFigurePath(rectBorder, borderRadius - borderSize))
using (Pen penSurface = new Pen(this.Parent.BackColor, smoothSize))
using (Pen penBorder = new Pen(borderColor, borderSize))
{
pevent.Graphics.SmoothingMode = SmoothingMode.AntiAlias;
this.Region = new Region(pathSurface);
pevent.Graphics.DrawPath(penSurface, pathSurface);
if (borderSize >= 1)
//Draw control border
pevent.Graphics.DrawPath(penBorder, pathBorder);
}
}
}

How to avoid visual artifacts of colored border of zoomable UserControl with rounded corners?

I have a Form which contains:
a TrackBar (minimum = 1, maximum = 200, represents zoom percent);
a UserControl with BorderStyle = BorderStyle.None.
Relevant code
Form1
From designer code
trackBar1.Value = 100;
BackColor = Color.Gray;
From code-behind
private void trackBar1_Scroll(object sender, EventArgs e)
{
userControl11.SetZoomFactor(trackBar1.Value / 100F);
}
UserControl1
internal float MyBaseWidth;
public UserControl1()
{
InitializeComponent();
MyBaseWidth = Width;
SetZoomFactor(1);
}
protected override void OnPaint(PaintEventArgs e)
{
base.OnPaint(e);
e.Graphics.SmoothingMode = SmoothingMode.HighQuality;
e.Graphics.CompositingQuality = CompositingQuality.HighQuality;
e.Graphics.InterpolationMode = InterpolationMode.HighQualityBicubic;
Pen p = new Pen(Color.Yellow);
e.Graphics.DrawPath(p, GraphicsPathWithBorder);
}
internal GraphicsPath GraphicsPathWithBorder;
internal void SetZoomFactor(float z)
{
Width = (int)(MyBaseWidth * z);
GraphicsPathWithBorder = RoundedCornerRectangle(ClientRectangle);
Region = new Region(GraphicsPathWithBorder);
}
internal static GraphicsPath RoundedCornerRectangle(Rectangle r)
{
GraphicsPath path = new GraphicsPath();
float size = 10 * 2F;
path.StartFigure();
path.AddArc(r.X, r.Y,
size, size, 180, 90);
path.AddArc((r.X + (r.Width - size)), r.Y,
size, size, 270, 90);
path.AddArc((r.X + (r.Width - size)), (r.Y + (r.Height - size)),
size, size, 0, 90);
path.AddArc(r.X, (r.Y + (r.Height - size)),
size, size, 90, 90);
path.CloseFigure();
return path;
}
Initial screenshot
Screenshot after using the trackbar
The right side of the yellow border becomes invisible after zooming out, and when zooming in there are multiple yellow borders on the right side.
Update:
The answer Works, but there is a part of the control that goes beyond the border. Screenshot for top-right corner, for curveSize = 20:
and for curveSize = 24:

I suggest a slightly different method to draw the Border and the content of the User Control that should also cure the artifacts generated when the control is redrawn.
When you create a Region for a Control and then you paint the Region as it is, the outer borders of the painting are not anti-aliased: the aliased pixels fall outside the Region. The same effect of course is applied when a border is painted around the bounds of the Region.
Here, I apply a Scale Matrix and a Translate Matrix that scale and move the bounds of the Region on the inside of the outer Region that defines the control's bounds.
The size of the scale and the translate transformations are determined by the Pen size.
More information on the Matrix usage here: Flip the GraphicsPath
In this case, when the borders are painted, the outer, anti-aliased, section of the border is inside the Region bounds and the anti-aliasing is preserved.
The background color of the Control is set to Color.Transparent (a User Control supports color transparency on its own).
I've also added a couple of (non decorated) properties that allow to define the inner Color (the Control's BackColor) and Size and Color of the Border. The rest is more or less what it was before.
Sample results:
using System.Drawing;
using System.Drawing.Drawing2D;
public partial class RoundControl : UserControl
{
private GraphicsPath GraphicsPathWithBorder;
private float MyBaseWidth;
private float m_PenSize = 2f;
private Color m_BorderColor = Color.Yellow;
private Color m_FillColor = Color.Green;
public RoundControl()
{
ResizeRedraw = true;
InitializeComponent();
MyBaseWidth = Width;
}
public float BorderSize
{
get => m_PenSize;
set {
m_PenSize = value;
Invalidate();
}
}
public Color BorderColor
{
get => m_BorderColor;
set {
m_BorderColor = value;
Invalidate();
}
}
public Color FillColor
{
get => m_FillColor;
set {
m_FillColor = value;
Invalidate();
}
}
protected override void OnLayout(LayoutEventArgs e) {
UpdateRegion();
base.OnLayout(e);
}
protected override void OnPaint(PaintEventArgs e)
{
e.Graphics.SmoothingMode = SmoothingMode.AntiAlias;
RectangleF rect = GraphicsPathWithBorder.GetBounds();
float scaleX = 1 - ((m_PenSize + 1) / rect.Width);
float scaleY = 1 - ((m_PenSize + 1) / rect.Height);
using (Pen pen = new Pen(m_BorderColor, m_PenSize))
using (Brush brush = new SolidBrush(m_FillColor))
using (Matrix mx = new Matrix(scaleX, 0, 0, scaleY, pen.Width / 2, pen.Width / 2))
{
e.Graphics.Transform = mx;
e.Graphics.FillPath(brush, GraphicsPathWithBorder);
e.Graphics.DrawPath(pen, GraphicsPathWithBorder);
}
base.OnPaint(e);
}
internal void SetZoomFactor(float z) {
int newWidth = (int)(MyBaseWidth * z);
if (newWidth <= (30 + m_PenSize * 2)) return;
Width = newWidth;
UpdateRegion();
}
private void UpdateRegion() {
GraphicsPathWithBorder = RoundedCornerRectangle(ClientRectangle);
Region = new Region(GraphicsPathWithBorder);
Invalidate();
}
private GraphicsPath RoundedCornerRectangle(Rectangle r)
{
GraphicsPath path = new GraphicsPath();
// Fixed curve size since we only scale on X-dimension
// Otherwise, adjust also considering the height
float curveSize = 10 * 2.4F;
path.StartFigure();
path.AddArc(r.X, r.Y, curveSize, curveSize, 180, 90);
path.AddArc(r.Right - curveSize, r.Y, curveSize, curveSize, 270, 90);
path.AddArc(r.Right - curveSize, r.Bottom - curveSize, curveSize, curveSize, 0, 90);
path.AddArc(r.X, r.Bottom - curveSize, curveSize, curveSize, 90, 90);
path.CloseFigure();
return path;
}
}

Can I do a circle Picture Box in C#? [duplicate]

How to round edges in picturebox control. I Want to get angles like ellipse have but i dont know how to do it. I Use C#. Thanks!

putting 1 Picture box on the form and write this code
also you can change the the minus number beside of Width and Height to get best result
System.Drawing.Drawing2D.GraphicsPath gp = new System.Drawing.Drawing2D.GraphicsPath();
gp.AddEllipse(0, 0, pictureBox1.Width - 3, pictureBox1.Height - 3);
Region rg = new Region(gp);
pictureBox1.Region = rg;

Yes, no problem, you can give a control an arbitrary shape with its Region property. Add a new class to your project and paste the code shown below. Compile. Drop the new control from the top of the toolbox onto your form.
using System;
using System.Drawing;
using System.Drawing.Drawing2D;
using System.Windows.Forms;
class OvalPictureBox : PictureBox {
public OvalPictureBox() {
this.BackColor = Color.DarkGray;
}
protected override void OnResize(EventArgs e) {
base.OnResize(e);
using (var gp = new GraphicsPath()) {
gp.AddEllipse(new Rectangle(0, 0, this.Width-1, this.Height-1));
this.Region = new Region(gp);
}
}
}

Round edges as in round corners?
If so check out http://social.msdn.microsoft.com/forums/en-US/winforms/thread/603084bb-1aae-45d1-84ae-8544386d58fd
Rectangle r = new Rectangle(0, 0, pictureBox1.Width, pictureBox1.Height);
System.Drawing.Drawing2D.GraphicsPath gp = new System.Drawing.Drawing2D.GraphicsPath();
int d = 50;
gp.AddArc(r.X, r.Y, d, d, 180, 90);
gp.AddArc(r.X + r.Width - d, r.Y, d, d, 270, 90);
gp.AddArc(r.X + r.Width - d, r.Y + r.Height - d, d, d, 0, 90);
gp.AddArc(r.X, r.Y + r.Height - d, d, d, 90, 90);
pictureBox1.Region = new Region(gp);

Thank you, Hans. But I also need a smooth look. I did some research on this subject, but I could not find a solution. Then I tried to do it myself and found the solution below. Maybe someone else needs it.
protected override void OnPaint(PaintEventArgs e)
{
base.OnPaint(e);
using (GraphicsPath gp = new GraphicsPath())
{
gp.AddEllipse(0, 0, this.Width - 1, this.Height - 1);
Region = new Region(gp);
e.Graphics.SmoothingMode = SmoothingMode.AntiAlias;
e.Graphics.DrawEllipse(new Pen(new SolidBrush(this.BackColor), 1), 0, 0, this.Width - 1, this.Height - 1);
}
}

How to create a form in shape of rhomb?

How to create a form in shape of rhomb?
I managed to create a shape in form of ellipse with the help of this:
private void Form1_Load(object sender, EventArgs e)
{
System.Drawing.Drawing2D.GraphicsPath myPath = new System.Drawing.Drawing2D.GraphicsPath();
myPath.AddEllipse(45, 60, 200, 200);
Region myRegion = new Region(myPath);
this.Region = myRegion;
}
How can I do it but making rhomb?

Use myPath.AddLines instead of the myPath.AddEllipse:
private void Form1_Load(object sender, EventArgs e)
{
using (GraphicsPath myPath = new GraphicsPath())
{
myPath.AddLines(new[]
{
new Point(0, Height / 2),
new Point(Width / 2, 0),
new Point(Width, Height / 2),
new Point(Width / 2, Height)
});
Region = new Region(myPath);
}
}

Above answer by #Dmitry helped me a lot. However, it does not draw a complete rhombus, as claimed. The last segment is not drawn due to absent final point, which must coincide with the starting point. Line array should contain five points, not four.
I have made some corrections and come up with this function, which draws a rhombus withing a given rectangle:
private void DrawRhombus(Graphics graphics, Rectangle rectangle)
{
using (GraphicsPath myPath = new GraphicsPath())
{
myPath.AddLines(new[]
{
new Point(rectangle.X, rectangle.Y + (rectangle.Height / 2)),
new Point(rectangle.X + (rectangle.Width / 2), rectangle.Y),
new Point(rectangle.X + rectangle.Width, rectangle.Y + (rectangle.Height / 2)),
new Point(rectangle.X + (rectangle.Width / 2), rectangle.Y + rectangle.Height),
new Point(rectangle.X, rectangle.Y + (rectangle.Height / 2))
});
using (Pen pen = new Pen(Color.Black, 1))
graphics.DrawPath(pen, myPath);
}
}

Using a matrix to rotate rectangles individually

Having a bit of a drawing complication you would call it. My math is a bit rusty when it comes to Matrices and drawing rotations on shapes. Here is a bit of code:
private void Form1_Paint(object sender, PaintEventArgs e)
{
g = e.Graphics;
g.SmoothingMode = SmoothingMode.HighQuality;
DoRotation(e);
g.DrawRectangle(new Pen(Color.Black), r1);
g.DrawRectangle(new Pen(Color.Black), r2);
// draw a line (PEN, CenterOfObject(X, Y), endpoint(X,Y) )
g.DrawLine(new Pen(Color.Black), new Point((r1.X + 50), (r1.Y + 75)), new Point((/*r1.X + */50), (/*r1.Y - */25)));
this.lblPoint.Text = "X-pos: " + r1.X + " Y-pos: " + r1.Y;
//this.Invalidate();
}
public void DoRotation(PaintEventArgs e)
{
// move the rotation point to the center of object
e.Graphics.TranslateTransform((r1.X + 50), (r1.Y + 75));
//rotate
e.Graphics.RotateTransform((float)rotAngle);
//move back to the top left corner of the object
e.Graphics.TranslateTransform(-(r1.X + 50), -(r1.Y + 75));
}
public void Form1_KeyDown(object sender, KeyEventArgs e)
{
case Keys.T:
rotAngle += 1.0f;
}
when I rotate (what I think should be r1) both r1 and r2 rotate. I need to be able to rotate each shape individually as I add more shapes.

I would use a function similar to this:
public void RotateRectangle(Graphics g, Rectangle r, float angle) {
using (Matrix m = new Matrix()) {
m.RotateAt(angle, new PointF(r.Left + (r.Width / 2),
r.Top + (r.Height / 2)));
g.Transform = m;
g.DrawRectangle(Pens.Black, r);
g.ResetTransform();
}
}
It uses a matrix to perform the rotation at a certain point, which should be the middle of each rectangle.
Then in your paint method, use it to draw your rectangles:
g.SmoothingMode = SmoothingMode.HighQuality;
//g.DrawRectangle(new Pen(Color.Black), r1);
//DoRotation(e);
//g.DrawRectangle(new Pen(Color.Black), r2);
RotateRectangle(g, r1, 45);
RotateRectangle(g, r2, 65);
Also, here is the line to connect the two rectangles:
g.DrawLine(Pens.Black, new Point(r1.Left + r1.Width / 2, r1.Top + r1.Height / 2),
new Point(r2.Left + r2.Width / 2, r2.Top + r2.Height / 2));
Using these settings:
private Rectangle r1 = new Rectangle(100, 60, 32, 32);
private Rectangle r2 = new Rectangle(160, 100, 32, 32);
resulted in: