I have many times successfully implemented reading data from web pages using technique like this:
WebRequest req = (WebRequest)WebRequest.Create(path);
WebResponse resp = (WebResponse)req.GetResponse(); etc.
.........
However, this time the WebResponse throws an internal error. Otherwise, I can browse the parameter path.
What could be the reason?
I think it could be any number of reasons.
You should try to catch the error and see if you can get any further details from the response. Perhaps try adding the code below and see if that provides any further details:
catch (WebException webex)
{
Console.WriteLine("Unable to perform command: " + req);
String data = String.Empty;
if (webex.Response != null)
{
StreamReader r = new StreamReader(webex.Response.GetResponseStream());
data = r.ReadToEnd();
r.Close();
}
Console.WriteLine(webex.Message);
Console.WriteLine(data);
Probably its not creating the request, WebRequest.Create,
there can be a proxy issue if you are behind any proxy, i got the same problem that my code was unable to connect to any path but it was browsing fine.
Related
When the wrong answer(500) comes from Soap Web Services, i want to see the error details. I can use soap tool, i can do this process using a soap tool and see the error details. But using the WebResponse class in c#, i cannot see the error details.
Do you have any information on this subject?
Soap UI Tool Response Header Raw
WebResponse Exception
Regards.
Finally I have reached the right conclusion. And, I wanted to share thinking that someone might need it.
catch (WebException ex)
{
string exMessage = ex.Message;
if (ex.Response != null)
{
using (var responseReader = new StreamReader(ex.Response.GetResponseStream()))
{
exMessage = responseReader.ReadToEnd();
}
}
}
Err Details:
I wish a healthy New Year for all of us!
I have 2 different ASP.NET Core websites: admin and public.
Both running on staging server and on local machine.
I send GET request to different pages to determine execution time of different pages and encountered problem with admin site: all urls on local instance and staging always returns 404 error:
An unhandled exception of type 'System.Net.WebException' occurred in
System.dll
Additional information: The remote server returned an error: (404) Not
Found.
Meanwhile, same requests in browser return html pages normally. Requests through HttpWebRequest to public site always also return 200 Status Code (OK).
Code for request I took here.
I tried to add all headers and cookies from browser request, but it didn't help. Also tried to debug local instance and found that no exceptions thrown while request executed.
Any ideas?
404 is way to generic. The code provided in answer in your link (https://stackoverflow.com/a/16642279/571203) does no error handling - this is brilliant example of how you can get to troubles when you blindly copy code from stackoverflow :)
Modified code with error handling should look like:
string urlAddress = "http://google.com/rrr";
var request = (HttpWebRequest)WebRequest.Create(urlAddress);
string data = null;
string errorData = null;
try
{
using (var response = (HttpWebResponse)request.GetResponse())
{
data = ReadResponse(response);
}
}
catch (WebException exception)
{
using (var response = (HttpWebResponse)exception.Response)
{
errorData = ReadResponse(response);
}
}
static string ReadResponse(HttpWebResponse response)
{
if (response.CharacterSet == null)
{
using (var reader = new StreamReader(response.GetResponseStream()))
{
return reader.ReadToEnd();
}
}
using (var reader = new StreamReader(response.GetResponseStream(), Encoding.GetEncoding(response.CharacterSet)))
{
return reader.ReadToEnd();
}
}
So when there is an exception, you'll get not just the status code, but entire response from server in the errorData variable.
One thing to check is proxy - browser can use http proxy while your server client uses none.
I am initiating an HttpWebRequest and then retrieving it's response. Occasionally, I get a 500 (or at least 5##) error, but no description. I have control over both endpoints and would like the receiving end to get a little bit more information. For example, I would like to pass the exception message from server to client. Is this possible using HttpWebRequest and HttpWebResponse?
Code:
try
{
HttpWebRequest webRequest = HttpWebRequest.Create(URL) as HttpWebRequest;
webRequest.Method = WebRequestMethods.Http.Get;
webRequest.Credentials = new NetworkCredential(Username, Password);
webRequest.ContentType = "application/x-www-form-urlencoded";
using(HttpWebResponse response = webRequest.GetResponse() as HttpWebResponse)
{
if(response.StatusCode == HttpStatusCode.OK)
{
// Do stuff with response.GetResponseStream();
}
}
}
catch(Exception ex)
{
ShowError(ex);
// if the server returns a 500 error than the webRequest.GetResponse() method
// throws an exception and all I get is "The remote server returned an error: (500)."
}
Any help with this would be much appreciated.
Is this possible using HttpWebRequest and HttpWebResponse?
You could have your web server simply catch and write the exception text into the body of the response, then set status code to 500. Now the client would throw an exception when it encounters a 500 error but you could read the response stream and fetch the message of the exception.
So you could catch a WebException which is what will be thrown if a non 200 status code is returned from the server and read its body:
catch (WebException ex)
{
using (var stream = ex.Response.GetResponseStream())
using (var reader = new StreamReader(stream))
{
Console.WriteLine(reader.ReadToEnd());
}
}
catch (Exception ex)
{
// Something more serious happened
// like for example you don't have network access
// we cannot talk about a server exception here as
// the server probably was never reached
}
I came across this question when trying to check if a file existed on an FTP site or not. If the file doesn't exist there will be an error when trying to check its timestamp. But I want to make sure the error is not something else, by checking its type.
The Response property on WebException will be of type FtpWebResponse on which you can check its StatusCode property to see which FTP error you have.
Here's the code I ended up with:
public static bool FileExists(string host, string username, string password, string filename)
{
// create FTP request
FtpWebRequest request = (FtpWebRequest)WebRequest.Create("ftp://" + host + "/" + filename);
request.Credentials = new NetworkCredential(username, password);
// we want to get date stamp - to see if the file exists
request.Method = WebRequestMethods.Ftp.GetDateTimestamp;
try
{
FtpWebResponse response = (FtpWebResponse)request.GetResponse();
var lastModified = response.LastModified;
// if we get the last modified date then the file exists
return true;
}
catch (WebException ex)
{
var ftpResponse = (FtpWebResponse)ex.Response;
// if the status code is 'file unavailable' then the file doesn't exist
// may be different depending upon FTP server software
if (ftpResponse.StatusCode == FtpStatusCode.ActionNotTakenFileUnavailable)
{
return false;
}
// some other error - like maybe internet is down
throw;
}
}
I faced a similar situation:
I was trying to read raw response in case of an HTTP error consuming a SOAP service, using BasicHTTPBinding.
However, when reading the response using GetResponseStream(), got the error:
Stream not readable
So, this code worked for me:
try
{
response = basicHTTPBindingClient.CallOperation(request);
}
catch (ProtocolException exception)
{
var webException = exception.InnerException as WebException;
var rawResponse = string.Empty;
var alreadyClosedStream = webException.Response.GetResponseStream() as MemoryStream;
using (var brandNewStream = new MemoryStream(alreadyClosedStream.ToArray()))
using (var reader = new StreamReader(brandNewStream))
rawResponse = reader.ReadToEnd();
}
You can also use this library which wraps HttpWebRequest and Response into simple methods that return objects based on the results. It uses some of the techniques described in these answers and has plenty of code inspired by answers from this and similar threads. It automatically catches any exceptions, seeks to abstract as much boiler plate code needed to make these web requests as possible, and automatically deserializes the response object.
An example of what your code would look like using this wrapper is as simple as
var response = httpClient.Get<SomeResponseObject>(request);
if(response.StatusCode == HttpStatusCode.OK)
{
//do something with the response
console.Writeline(response.Body.Id); //where the body param matches the object you pass in as an anonymous type.
}else {
//do something with the error
console.Writelint(string.Format("{0}: {1}", response.StatusCode.ToString(), response.ErrorMessage);
}
Full disclosure
This library is a free open source wrapper library, and I am the author of said library. I make no money off of this but have found it immensely useful over the years and am sure anyone who is still using the HttpWebRequest / HttpWebResponse classes will too.
It is not a silver bullet but supports get, post, delete with both async and non-async for get and post as well as JSON or XML requests and responses. It is being actively maintained as of 6/21/2020
Sometimes ex.Response also throws NullReferenceException so below is the best way to handle
catch (WebException ex)
{
using (var stream = ex?.Response?.GetResponseStream())
if(stream != null)
using (var reader = new StreamReader(stream))
{
Console.WriteLine(reader.ReadToEnd());
}
// todo...
}
catch (Exception ex)
{
// todo...
}
**Answer Updated on 14-03-2022**
HttpWebRequest myHttprequest = null;
HttpWebResponse myHttpresponse = null;
try
{
myHttpRequest = (HttpWebRequest)WebRequest.Create(URL);
myHttpRequest.Method = "POST";
myHttpRequest.ContentType = "application/x-www-form-urlencoded";
myHttpRequest.ContentLength = urinfo.Length;
StreamWriter writer = new StreamWriter(myHttprequest.GetRequestStream());
writer.Write(urinfo);
writer.Close();
myHttpresponse = (HttpWebResponse)myHttpRequest.GetResponse();
if (myHttpresponse.StatusCode == HttpStatusCode.OK)
{
//Success code flow
}
myHttpresponse.Close();
}
catch(WebException e) {
Console.WriteLine("This program is expected to throw WebException on successful run."+
"\n\nException Message :" + e.Message);
if(e.Status == WebExceptionStatus.ProtocolError) {
Console.WriteLine("Status Code : {0}",
((HttpWebResponse)e.Response).StatusCode);
Console.WriteLine("Status Description : {0}",
((HttpWebResponse)e.Response).StatusDescription);
}
**Updated Answer with try catch block**
[docs.microsoft][1]
I am initiating an HttpWebRequest and then retrieving it's response. Occasionally, I get a 500 (or at least 5##) error, but no description. I have control over both endpoints and would like the receiving end to get a little bit more information. For example, I would like to pass the exception message from server to client. Is this possible using HttpWebRequest and HttpWebResponse?
Code:
try
{
HttpWebRequest webRequest = HttpWebRequest.Create(URL) as HttpWebRequest;
webRequest.Method = WebRequestMethods.Http.Get;
webRequest.Credentials = new NetworkCredential(Username, Password);
webRequest.ContentType = "application/x-www-form-urlencoded";
using(HttpWebResponse response = webRequest.GetResponse() as HttpWebResponse)
{
if(response.StatusCode == HttpStatusCode.OK)
{
// Do stuff with response.GetResponseStream();
}
}
}
catch(Exception ex)
{
ShowError(ex);
// if the server returns a 500 error than the webRequest.GetResponse() method
// throws an exception and all I get is "The remote server returned an error: (500)."
}
Any help with this would be much appreciated.
Is this possible using HttpWebRequest and HttpWebResponse?
You could have your web server simply catch and write the exception text into the body of the response, then set status code to 500. Now the client would throw an exception when it encounters a 500 error but you could read the response stream and fetch the message of the exception.
So you could catch a WebException which is what will be thrown if a non 200 status code is returned from the server and read its body:
catch (WebException ex)
{
using (var stream = ex.Response.GetResponseStream())
using (var reader = new StreamReader(stream))
{
Console.WriteLine(reader.ReadToEnd());
}
}
catch (Exception ex)
{
// Something more serious happened
// like for example you don't have network access
// we cannot talk about a server exception here as
// the server probably was never reached
}
I came across this question when trying to check if a file existed on an FTP site or not. If the file doesn't exist there will be an error when trying to check its timestamp. But I want to make sure the error is not something else, by checking its type.
The Response property on WebException will be of type FtpWebResponse on which you can check its StatusCode property to see which FTP error you have.
Here's the code I ended up with:
public static bool FileExists(string host, string username, string password, string filename)
{
// create FTP request
FtpWebRequest request = (FtpWebRequest)WebRequest.Create("ftp://" + host + "/" + filename);
request.Credentials = new NetworkCredential(username, password);
// we want to get date stamp - to see if the file exists
request.Method = WebRequestMethods.Ftp.GetDateTimestamp;
try
{
FtpWebResponse response = (FtpWebResponse)request.GetResponse();
var lastModified = response.LastModified;
// if we get the last modified date then the file exists
return true;
}
catch (WebException ex)
{
var ftpResponse = (FtpWebResponse)ex.Response;
// if the status code is 'file unavailable' then the file doesn't exist
// may be different depending upon FTP server software
if (ftpResponse.StatusCode == FtpStatusCode.ActionNotTakenFileUnavailable)
{
return false;
}
// some other error - like maybe internet is down
throw;
}
}
I faced a similar situation:
I was trying to read raw response in case of an HTTP error consuming a SOAP service, using BasicHTTPBinding.
However, when reading the response using GetResponseStream(), got the error:
Stream not readable
So, this code worked for me:
try
{
response = basicHTTPBindingClient.CallOperation(request);
}
catch (ProtocolException exception)
{
var webException = exception.InnerException as WebException;
var rawResponse = string.Empty;
var alreadyClosedStream = webException.Response.GetResponseStream() as MemoryStream;
using (var brandNewStream = new MemoryStream(alreadyClosedStream.ToArray()))
using (var reader = new StreamReader(brandNewStream))
rawResponse = reader.ReadToEnd();
}
You can also use this library which wraps HttpWebRequest and Response into simple methods that return objects based on the results. It uses some of the techniques described in these answers and has plenty of code inspired by answers from this and similar threads. It automatically catches any exceptions, seeks to abstract as much boiler plate code needed to make these web requests as possible, and automatically deserializes the response object.
An example of what your code would look like using this wrapper is as simple as
var response = httpClient.Get<SomeResponseObject>(request);
if(response.StatusCode == HttpStatusCode.OK)
{
//do something with the response
console.Writeline(response.Body.Id); //where the body param matches the object you pass in as an anonymous type.
}else {
//do something with the error
console.Writelint(string.Format("{0}: {1}", response.StatusCode.ToString(), response.ErrorMessage);
}
Full disclosure
This library is a free open source wrapper library, and I am the author of said library. I make no money off of this but have found it immensely useful over the years and am sure anyone who is still using the HttpWebRequest / HttpWebResponse classes will too.
It is not a silver bullet but supports get, post, delete with both async and non-async for get and post as well as JSON or XML requests and responses. It is being actively maintained as of 6/21/2020
Sometimes ex.Response also throws NullReferenceException so below is the best way to handle
catch (WebException ex)
{
using (var stream = ex?.Response?.GetResponseStream())
if(stream != null)
using (var reader = new StreamReader(stream))
{
Console.WriteLine(reader.ReadToEnd());
}
// todo...
}
catch (Exception ex)
{
// todo...
}
**Answer Updated on 14-03-2022**
HttpWebRequest myHttprequest = null;
HttpWebResponse myHttpresponse = null;
try
{
myHttpRequest = (HttpWebRequest)WebRequest.Create(URL);
myHttpRequest.Method = "POST";
myHttpRequest.ContentType = "application/x-www-form-urlencoded";
myHttpRequest.ContentLength = urinfo.Length;
StreamWriter writer = new StreamWriter(myHttprequest.GetRequestStream());
writer.Write(urinfo);
writer.Close();
myHttpresponse = (HttpWebResponse)myHttpRequest.GetResponse();
if (myHttpresponse.StatusCode == HttpStatusCode.OK)
{
//Success code flow
}
myHttpresponse.Close();
}
catch(WebException e) {
Console.WriteLine("This program is expected to throw WebException on successful run."+
"\n\nException Message :" + e.Message);
if(e.Status == WebExceptionStatus.ProtocolError) {
Console.WriteLine("Status Code : {0}",
((HttpWebResponse)e.Response).StatusCode);
Console.WriteLine("Status Description : {0}",
((HttpWebResponse)e.Response).StatusDescription);
}
**Updated Answer with try catch block**
[docs.microsoft][1]
Behold the code:
using (var client = new WebClient())
{
try
{
var bytesReceived = client.UploadData("http://localhost", bytesToPost);
var response = client.Encoding.GetString(bytesReceived);
}
catch (Exception ex)
{
}
}
I am getting this HTTP 500 internal server error when the UploadData method is called. But I can't see the error description anywhere in the "ex" object while debugging. How do I rewrite this code so I can read the error description?
Web servers often return an error page with more details (either HTML or plain text depending on the server). You can grab this by catching WebException and reading the response stream from its Response property.
I found useful information for debugging this way:
catch (WebException ex)
{
HttpWebResponse httpWebResponse = (HttpWebResponse)ex.Response;
String details = "NONE";
String statusCode = "NONE";
if (httpWebResponse != null)
{
details = httpWebResponse.StatusDescription;
statusCode = httpWebResponse.StatusCode.ToString();
}
Response.Clear();
Response.Write(ex.Message);
Response.Write("<BR />");
Response.Write(ex.Status);
Response.Write("<BR />");
Response.Write(statusCode);
Response.Write("<BR />");
Response.Write(details);
Response.Write("<BR />");
Response.Write(ex);
Response.Write("<BR />");
}
Try catching a HttpException and call GetHtmlErrorMessage() on it
I've always liked
Debug.WriteLine( ex.ToString() );
You should use HttpWebRequest and HttpWebResponse. WebClient is the simplest thing to use to do basic web communication, but it does not provide the functionality you need. I think it's better to do this because it will not throw an exception.