On the Windows Form application I have a Lamp image (a black and white one, and a bright one. For OFF and ON respectively).
Using the Button how can I achieve the scenario such that same button will turn the property of the image (pictureBox in my case) to show the Lamp as ON and pressing the same button again will turn the Lamp off.
I am accessing the 'Visible' property of picture box.
Put two images on top of each other and get the button to switch which one of them is enabled.
In the form designer you make one of them visible and the other non-visible. The code in the button handler can then be something like:
lightImage.Visible = !lightImage.Visible;
darkImage.Visible = != lightImage.Visible;
That will swap which one is visible and eliminate the need to keep state elsewhere.
A bit late to the party, but you can use a checkbox and set the appearance to button.
I think that would do what is expected by the original post.
I'm not sure about the way to put 2 images over each other, but if you want to reach the same effect:
place the 2 image files in your project resources
in the click event of the button, toggle the button image depending on a setting:
this would be in the click event:
Properties.Settings.Default.IsOptimizedForTracer !=Properties.Settings.Default.IsOptimizedForTracer;
if (!Properties.Settings.Default.IsOptimizedForTracer)
{
btnOptimizeForTracer.Image = Properties.Resources.TracerOFF;
return;
}
btnOptimizeForTracer.Image = Properties.Resources.TracerON;
Related
Currently I used this snip code as a result from googling.
var eventArgs = new TextCompositionEventArgs(Keyboard.PrimaryDevice,
new TextComposition(InputManager.Current, Keyboard.FocusedElement, "A"));
eventArgs.RoutedEvent = TextInputEvent;
var flag = InputManager.Current.ProcessInput(eventArgs);
It was working if I used Keyboard.Focus(TxtBox); and the TxtBox will be filled with the Keystroke.
But what I want really achieved is:
1.Drawing a box (for example, I draw box on one of the excel cell)
2.Click on the box coordinate (to change Keyboard Focus)
3.Send Keystroke to clicked excel cell
I have done step 1 and 2.
But I can't find a way to do the third step.
Somehow, the click event (using mouse event) maybe not changing Keyboard Focus automatically.
So, how do I change Keyboard focus, if possible using coordinate ?
Or maybe can I get IInputElement from a coordinate ? and then set keyboard focus to it.
Of course, all of it outside from the main application window of the WPF.
Found it !
At:
Installed InputSimulator via NuGet, no members accessible
It is working in most cases.
I said in most cases, because it is able to type in other window like excel application, but on other custom app window. There might be a case it won't work.
Hope it help for other people, looking for the same thing.
Is there any method to hide a button text behind button image like bring to front or send to back option?
I only need to hide or show button image only as I have a code that coverts the original text CloseButton.text = "&Close"; to CloseButton.Text = "&Cancel";
to perform another command so I can't use CloseButton.Text = "";.
Tried this link - WinForms button with image and text but my button size is too small that it would only show the text and not the image no matter how I mix and match TextAlign and ImageAlign.
Any help is much appreciated. Thanks in advance.
Sample Button Size below:
Check this
Place Textbox in Button and set textbox.visible=false method
Is there any method to hide a button text behind button image like
bring to front or send to back option?
There is no such built in but you can simply clear out the text on click event of the controls. Example: if you have radio buttons for send to back then on click of that clear out the control text saying controlId.Text = string.Empty
As #Rotem posted in the comments.
Have your code behind use the Tag property rather than Text. Easiest way out is using properties for what they were made for.
Instead of using CloseButton.text = "&Close"; I changed it to CloseButton.Tag = "&Close"; and made my code worked around it to have the same function without placing an actual Text in my Buttons. Credit this asnwer to #Rotem. Thanks.
I want to create simple wizard with 3 pages
Page 1 have just next button
Page 2 have next and previous
Page 3 have previous and finish
I have created the pages and add to them needed buttons and in the events I have call to the next pages, for instance in page one in the button click I added the following code
private void Button_Click(object sender, RoutedEventArgs e)
{
p2 = new Page2();
NavigationService.Navigate(p2);
}
In the main window cs I have changed the inheritance to NavigationWindow instead of Window and in the xaml also. Currently its working but I have 3 questions.
The pages which displayed is part of the main window, how can i avoid it, since when I run it the buttons place is not like I put in the designer? It was changed.
The button currently in the Grid, should I put them in different control (the button place should be like any wizard in the left buttom of the page) ?
How can I avoid the navigation arrows in the page right upper screen?
Thanks!
To answer your questsions in reverse,
3. How can I avoid the navigation arrows in the page upper right screen?
I have an opensource library http://winchrome.codeplex.com/ that re-styles navigation windows in several ways. For example these are all NavigationWindow s
In short you just style the NavigationWindow to only show the parts you want.
2.The button currently in the Grid, should I put them in different control (the button place should be like any wizard in the left buttom of the page) ?
If you look at the styles from WinChrome then you will see that it is just a case of rebuiliding the UI as you want and providing a ContentPresenter to hold your pages. e.g. the VS2012 style applies lots of styles on the window but avoids adding back and forward buttons., whereas the Win7 style rebuilds the back and forwards in a Win7 Style.
If you do this however you will need a means of passing your enabled or visible states to the buttons outside the pages. Take a look at http://www.codeproject.com/Articles/8197/Designer-centric-Wizard-control for how to do this in Winforms. In WPF you could either derive from your Pages to create WizardPage classes with CanBack, CanNext or IsFinish properties, or alteratively define attached properties to do the same (There are examples of how to do this in VS2012.cs where we define the glow color)
And finally
1. The pages which displayed is part of the main window, how can i avoid it, since when I run it the buttons place is not like I put in the designer? It was changed.
I'd need to see some code to comment on how you've done it, but if you look at any of the demo programs in WinChrome then you can see how I've done it without problems.
Good luck!
There is a similar question like mine here in Stackoverflow but it only explains how to change it in XAML. I want to know how can I change it in code.
Here is a image that shows how I do it in XAML using Blend:
Link for full size: https://snag.gy/4Skk4.jpg
Basically I want to change the background of a button's pressed state in C# but I can't seem to find any examples on the Internet. It must be in code because sometimes the image of the button will change therefore the button's pressed image must change as well.
The following code is just to change the image of the button and it's just the start.
image.ImageSource = new System.Windows.Media.Imaging.BitmapImage(new Uri(#"images/Button-warning-icon.png", UriKind.Relative));
image.Stretch = Stretch.Uniform;
buttonWarnings.Background = image;
If I understand you correctly, you are trying to change the appearance of the Button control in a "pressed" visual state.
I'm not near my dev computer to try it out, but to "unblock you" I'll give a direction.
First, as you noticed in your Blend screenshot, each visual state is represented with a Storyboard, which defines how various properties change. In your case, you're looking to change Background property.
The VisualStateGroups and their states are defined by the control. You can override them when you re-template the control. So, retemplate the button control using Blend with "Edit Template"->"Edit Copy".
Then, in code, you should be able to do the following:
1) Get visual states (this would not work unless you re-template the control, AFAIK)
var visualStateGroups = VisualStateManager.GetVisualStateGroups(buttonWarnings);
2) Get the VisualStateGroup of "CommonStates" from the visualStateGroups
collection
var commonStatesGroup = visualStateGroups.Find((g) => ((VisualStateGroup)g).Name == "CommonStates") as VisualStateGroup;
3) Get the "Pressed" VisualState:
var pressedVisualState = commonStatesGroup.Find((vs) => ((VisualState)vs).Name == "Pressed") as VisualState;
4) Change the storyboard of that state
pressedVisualState.Storyboard = newStoryboardWithCustomImageBackgroundProperty;
(Disclaimer: I'm not near in a computer to try it now - it's all in theory)
There are many examples to be found on the internet!
Take a look at some:
http://mobile.dzone.com/articles/windows-phone-buttonimage
http://loekvandenouweland.com/index.php/2011/01/windows-phone-image-button/
Actually its quite simple,
While in button pressed state....see part 3 in the image you uploaded above.
Above all the colors there is a row containing 5 icons.
Click on 4th icon.
it will show you option to choose image as background.
I am developing window phone 7 application in C# & silverlight 4. I am new to the silverlight.I have two buttons in my application for different purposes. I want to change the color of the button dynamically when the button gets clicked. So I am using the following code
IncomeButton.Background = new SolidColorBrush(Colors.Red);
But it is not working. Can you please provide me any code or link through which I can resolve the above issue ? If I am doing anything wrong then please guide me.
Changing the styling of a button from it's own click event comes with a catch. Peter elaborates here.
Why can't I change the Background of my Button on a Click event? - Peter Torr's Blog
You can simply execute IncomeButton.UpdateLayout() after changing button's color.
I also ran into that "simple" problem. Instead of using Peter's "button styling change" thing, I simply placed a rectangle below the button and changed it's color with the Rectangle.Fill property in the Click event of the button. Works fine for me.