Am currently working on a Webforms Webapplication in C# and need to import the value of email address of the altRecipient attribute in Active Directory. I've been struggling with this for days now and can't seem to get it right.
The 'altRecipient' attribute returns a path//: that leads to the DistinguishedName. So i get something like this CN=edward-audi,OU=AUe,OU=daimler Mail,DC=diamler,DC=net.The returned value is the CN and the email address i need, is within the CN specifically where OU=daimler Mail. Am not sure if am doing the right thing. Maybe my approach is totally wrong.
SearchResultCollection result;
DirectorySearcher search = new DirectorySearcher("LDAP://DC=mycompany,DC=net")
{
SearchScope = SearchScope.Subtree,
Filter = "(&(objectCategory=user)(sAMAccountName=*" + UserName + "*))"
};
result = search.FindAll();
foreach (SearchResult sr in result)
{
dr = table.NewRow();
DirectoryEntry de = sr.GetDirectoryEntry();
if (de.Properties["altRecipient"].Value != null && de.Properties["altRecipient"].Value.ToString() != string.Empty)
{
string userID = de.Properties["sAMAccountName"].Value.ToString();
string Domain = "domain.net";
PrincipalContext pc = new PrincipalContext(ContextType.Domain, Domain);
UserPrincipal up = UserPrincipal.FindByIdentity(pc, userID);
if (up != null)
{
string userPrincipal = up.ToString();
de = up.GetUnderlyingObject() as DirectoryEntry;
string altRecepientCN = de.Properties["altRecipient"].Value.ToString();
UserPrincipal altRecepientValue = UserPrincipal.FindByIdentity(pc, altRecepientCN);
}
}
}
I want to find if the user belongs to an AD group. Can you advise how I can add that functionality using the following code?
I ask the user to enter their username and password (through a form), so not using the windows credentials. With the below code I am able to validate the user, by passing the username, and password. How can I build on the code to check if user exists in the AD Group. Is there another way to do this? Please advice
DirectoryEntry adsEntry = new DirectoryEntry("domain", userid, password);
DirectorySearcher adsSearcher = new DirectorySearcher(adsEntry);
try {
SearchResult adsSearchResult = adsSearcher.FindOne();
context.Session.Timeout = 2;
context.Session["ValidatedLoginID"] = userid;
user.Verified = true;
adsEntry.Close();
} catch ( Exception ex ) {
// Failed to authenticate. Most likely it is caused by unknown user
// id or bad strPassword.
user.error = ex.Message;
adsEntry.Close();
}
You can use the below code:
// set up domain context
PrincipalContext ctx = new PrincipalContext(ContextType.Domain, "DOMAINNAME");
// find a user
UserPrincipal user = UserPrincipal.FindByIdentity(ctx, "SomeUserName");
// find the group in question
GroupPrincipal group = GroupPrincipal.FindByIdentity(ctx, "YourGroupNameHere");
if(user != null)
{
// check if user is member of that group
if (user.IsMemberOf(group))
{
// do something.....
}
}
Also look at: How to check if a user belongs to an AD group?
Here is how I solved this :
DirectoryEntry adsEntry = new DirectoryEntry("domain", userid, password);
DirectorySearcher adsSearcher = new DirectorySearcher(adsEntry);
adsSearcher.Filter = "(&(objectClass=user)(objectCategory=person)(sAMAccountName=" + userid + "))";
try
{
SearchResult adsSearchResult = adsSearcher.FindOne();
string propertyName = "memberOf";
ResultPropertyValueCollection rpvcResult = adsSearchResult.Properties[propertyName];
foreach (Object PropertyValue in rpvcResult)
{
if (PropertyValue.ToString() == "Group Name")
{
user.Verified = true;
user.FullName = GetFullName(userid);
adsEntry.Close();
} else
{
user.Verified = false;
user.error = "You do not belong to the Group so you cannot do this function";
}
}
} catch (Exception ex)
{
user.error = "Please check your username and password credentials";
adsEntry.Close();
}
I checked this post already. But it doesn't answer my question. I want to get all the active directory groups in which a particular user is a member.
I've written the following code. But I'm not able to proceed further as I don't know how to give the filter and how to access the properties.
class Program
{
static void Main(string[] args)
{
DirectoryEntry de = new DirectoryEntry("LDAP://mydomain.com");
DirectorySearcher searcher = new DirectorySearcher(de);
searcher.Filter = "(&(ObjectClass=group))";
searcher.PropertiesToLoad.Add("distinguishedName");
searcher.PropertiesToLoad.Add("sAMAccountName");
searcher.PropertiesToLoad.Add("name");
searcher.PropertiesToLoad.Add("objectSid");
SearchResultCollection results = searcher.FindAll();
int i = 1;
foreach (SearchResult res in results)
{
Console.WriteLine("Result" + Convert.ToString(i++));
DisplayProperties("distinguishedName", res);
DisplayProperties("sAMAccouontName", res);
DisplayProperties("name", res);
DisplayProperties("objectSid", res);
Console.WriteLine();
}
Console.ReadKey();
}
private static void DisplayProperties(string property, SearchResult res)
{
Console.WriteLine("\t" + property);
ResultPropertyValueCollection col = res.Properties[property];
foreach (object o in col)
{
Console.WriteLine("\t\t" + o.ToString());
}
}
}
Any ideas?
You should use System.DirectoryServices.AccountManagement. It's much easier. Here is a nice code project article giving you an overview on all the classes in this DLL.
As you pointed out, your current approach doesn't find out the primary group. Actually, it's much worse than you thought. There are some more cases that it doesn't work, like the domain local group from another domain. You can check here for details. Here is how the code looks like if you switch to use System.DirectoryServices.AccountManagement. The following code can find the immediate groups this user assigned to, which includes the primary group.
UserPrincipal user = UserPrincipal.FindByIdentity(new PrincipalContext (ContextType.Domain, "mydomain.com"), IdentityType.SamAccountName, "username");
foreach (GroupPrincipal group in user.GetGroups())
{
Console.Out.WriteLine(group);
}
Use tokenGroups:
DirectorySearcher ds = new DirectorySearcher();
ds.Filter = String.Format("(&(objectClass=user)(sAMAccountName={0}))", username);
SearchResult sr = ds.FindOne();
DirectoryEntry user = sr.GetDirectoryEntry();
user.RefreshCache(new string[] { "tokenGroups" });
for (int i = 0; i < user.Properties["tokenGroups"].Count; i++) {
SecurityIdentifier sid = new SecurityIdentifier((byte[]) user.Properties["tokenGroups"][i], 0);
NTAccount nt = (NTAccount)sid.Translate(typeof(NTAccount));
//do something with the SID or name (nt.Value)
}
Note: this only gets security groups
Just query the "memberOf" property and iterate though the return, example:
search.PropertiesToLoad.Add("memberOf");
StringBuilder groupNames = new StringBuilder(); //stuff them in | delimited
SearchResult result = search.FindOne();
int propertyCount = result.Properties["memberOf"].Count;
String dn;
int equalsIndex, commaIndex;
for (int propertyCounter = 0; propertyCounter < propertyCount;
propertyCounter++)
{
dn = (String)result.Properties["memberOf"][propertyCounter];
equalsIndex = dn.IndexOf("=", 1);
commaIndex = dn.IndexOf(",", 1);
if (-1 == equalsIndex)
{
return null;
}
groupNames.Append(dn.Substring((equalsIndex + 1),
(commaIndex - equalsIndex) - 1));
groupNames.Append("|");
}
return groupNames.ToString();
This just stuffs the group names into the groupNames string, pipe delimited, but when you spin through you can do whatever you want with them
This code works even faster (two 1.5 faster than my previous version):
public List<String> GetUserGroups(WindowsIdentity identity)
{
List<String> groups = new List<String>();
String userName = identity.Name;
int pos = userName.IndexOf(#"\");
if (pos > 0) userName = userName.Substring(pos + 1);
PrincipalContext domain = new PrincipalContext(ContextType.Domain, "riomc.com");
UserPrincipal user = UserPrincipal.FindByIdentity(domain, IdentityType.SamAccountName, userName); // NGeodakov
DirectoryEntry de = new DirectoryEntry("LDAP://RIOMC.com");
DirectorySearcher search = new DirectorySearcher(de);
search.Filter = "(&(objectClass=group)(member=" + user.DistinguishedName + "))";
search.PropertiesToLoad.Add("cn");
search.PropertiesToLoad.Add("samaccountname");
search.PropertiesToLoad.Add("memberOf");
SearchResultCollection results = search.FindAll();
foreach (SearchResult sr in results)
{
GetUserGroupsRecursive(groups, sr, de);
}
return groups;
}
public void GetUserGroupsRecursive(List<String> groups, SearchResult sr, DirectoryEntry de)
{
if (sr == null) return;
String group = (String)sr.Properties["cn"][0];
if (String.IsNullOrEmpty(group))
{
group = (String)sr.Properties["samaccountname"][0];
}
if (!groups.Contains(group))
{
groups.Add(group);
}
DirectorySearcher search;
SearchResult sr1;
String name;
int equalsIndex, commaIndex;
foreach (String dn in sr.Properties["memberof"])
{
equalsIndex = dn.IndexOf("=", 1);
if (equalsIndex > 0)
{
commaIndex = dn.IndexOf(",", equalsIndex + 1);
name = dn.Substring(equalsIndex + 1, commaIndex - equalsIndex - 1);
search = new DirectorySearcher(de);
search.Filter = "(&(objectClass=group)(|(cn=" + name + ")(samaccountname=" + name + ")))";
search.PropertiesToLoad.Add("cn");
search.PropertiesToLoad.Add("samaccountname");
search.PropertiesToLoad.Add("memberOf");
sr1 = search.FindOne();
GetUserGroupsRecursive(groups, sr1, de);
}
}
}
This is how I list all the groups (direct and indirect) for a specific Distinguished Name:
The string 1.2.840.113556.1.4.1941 specifies LDAP_MATCHING_RULE_IN_CHAIN.
This rule is limited to filters that apply to the DN. This is a special "extended" match operator that walks the chain of ancestry in objects all the way to the root until it finds a match.
This method is 25 times faster than the UserPrincipal.GetGroups() method in my testing.
Note: The primary group (typically Domain Users) is not returned by this or GetGroups() method. To get the primary group name too, I've confirmed this method works.
Additionally, I found this list of LDAP filters extremely useful.
private IEnumerable<string> GetGroupsForDistinguishedName(DirectoryEntry domainDirectoryEntry, string distinguishedName)
{
var groups = new List<string>();
if (!string.IsNullOrEmpty(distinguishedName))
{
var getGroupsFilterForDn = $"(&(objectCategory=group)(member:1.2.840.113556.1.4.1941:={distinguishedName}))";
using (DirectorySearcher dirSearch = new DirectorySearcher(domainDirectoryEntry))
{
dirSearch.Filter = getGroupsFilterForDn;
dirSearch.PropertiesToLoad.Add("name");
using (var results = dirSearch.FindAll())
{
foreach (SearchResult result in results)
{
if (result.Properties.Contains("name"))
groups.Add((string)result.Properties["name"][0]);
}
}
}
}
return groups;
}
The following example is from the Code Project article, (Almost) Everything In Active Directory via C#:
// userDn is a Distinguished Name such as:
// "LDAP://CN=Joe Smith,OU=Sales,OU=domain,OU=com"
public ArrayList Groups(string userDn, bool recursive)
{
ArrayList groupMemberships = new ArrayList();
return AttributeValuesMultiString("memberOf", userDn,
groupMemberships, recursive);
}
public ArrayList AttributeValuesMultiString(string attributeName,
string objectDn, ArrayList valuesCollection, bool recursive)
{
DirectoryEntry ent = new DirectoryEntry(objectDn);
PropertyValueCollection ValueCollection = ent.Properties[attributeName];
IEnumerator en = ValueCollection.GetEnumerator();
while (en.MoveNext())
{
if (en.Current != null)
{
if (!valuesCollection.Contains(en.Current.ToString()))
{
valuesCollection.Add(en.Current.ToString());
if (recursive)
{
AttributeValuesMultiString(attributeName, "LDAP://" +
en.Current.ToString(), valuesCollection, true);
}
}
}
}
ent.Close();
ent.Dispose();
return valuesCollection;
}
Just call the Groups method with the Distinguished Name for the user, and pass in the bool flag to indicate if you want to include nested / child groups memberships in your resulting ArrayList:
ArrayList groups = Groups("LDAP://CN=Joe Smith,OU=Sales,OU=domain,OU=com", true);
foreach (string groupName in groups)
{
Console.WriteLine(groupName);
}
If you need to do any serious level of Active Directory programming in .NET I highly recommend bookmarking & reviewing the Code Project article I mentioned above.
Here is the code that worked for me:
public ArrayList GetBBGroups(WindowsIdentity identity)
{
ArrayList groups = new ArrayList();
try
{
String userName = identity.Name;
int pos = userName.IndexOf(#"\");
if (pos > 0) userName = userName.Substring(pos + 1);
PrincipalContext domain = new PrincipalContext(ContextType.Domain, "riomc.com");
UserPrincipal user = UserPrincipal.FindByIdentity(domain, IdentityType.SamAccountName, userName);
DirectoryEntry de = new DirectoryEntry("LDAP://RIOMC.com");
DirectorySearcher search = new DirectorySearcher(de);
search.Filter = "(&(objectClass=group)(member=" + user.DistinguishedName + "))";
search.PropertiesToLoad.Add("samaccountname");
search.PropertiesToLoad.Add("cn");
String name;
SearchResultCollection results = search.FindAll();
foreach (SearchResult result in results)
{
name = (String)result.Properties["samaccountname"][0];
if (String.IsNullOrEmpty(name))
{
name = (String)result.Properties["cn"][0];
}
GetGroupsRecursive(groups, de, name);
}
}
catch
{
// return an empty list...
}
return groups;
}
public void GetGroupsRecursive(ArrayList groups, DirectoryEntry de, String dn)
{
DirectorySearcher search = new DirectorySearcher(de);
search.Filter = "(&(objectClass=group)(|(samaccountname=" + dn + ")(cn=" + dn + ")))";
search.PropertiesToLoad.Add("memberof");
String group, name;
SearchResult result = search.FindOne();
if (result == null) return;
group = #"RIOMC\" + dn;
if (!groups.Contains(group))
{
groups.Add(group);
}
if (result.Properties["memberof"].Count == 0) return;
int equalsIndex, commaIndex;
foreach (String dn1 in result.Properties["memberof"])
{
equalsIndex = dn1.IndexOf("=", 1);
if (equalsIndex > 0)
{
commaIndex = dn1.IndexOf(",", equalsIndex + 1);
name = dn1.Substring(equalsIndex + 1, commaIndex - equalsIndex - 1);
GetGroupsRecursive(groups, de, name);
}
}
}
I measured it's performance in a loop of 200 runs against the code that uses the AttributeValuesMultiString recursive method; and it worked 1.3 times faster.
It might be so because of our AD settings. Both snippets gave the same result though.
I would like to say that Microsoft LDAP has some special ways to search recursively for all of memberships of a user.
The Matching Rule you can specify for the "member" attribute. In particular, using the Microsoft Exclusive LDAP_MATCHING_RULE_IN_CHAIN rule for "member" attribute allows recursive/nested membership searching. The rule is used when you add it after the member attribute. Ex. (member:1.2.840.113556.1.4.1941:= XXXXX )
For the same Domain as the Account, The filter can use <SID=S-1-5-21-XXXXXXXXXXXXXXXXXXXXXXX> instead of an Accounts DistinguishedName attribute which is very handy to use cross domain if needed. HOWEVER it appears you need to use the ForeignSecurityPrincipal <GUID=YYYY> as it will not resolve your SID as it appears the <SID=> tag does not consider ForeignSecurityPrincipal object type. You can use the ForeignSecurityPrincipal DistinguishedName as well.
Using this knowledge, you can LDAP query those hard to get memberships, such as the "Domain Local" groups an Account is a member of but unless you looked at the members of the group, you wouldn't know if user was a member.
//Get Direct+Indirect Memberships of User (where SID is XXXXXX)
string str = "(& (objectCategory=group)(member:1.2.840.113556.1.4.1941:=<SID=XXXXXX>) )";
//Get Direct+Indirect **Domain Local** Memberships of User (where SID is XXXXXX)
string str2 = "(& (objectCategory=group)(|(groupType=-2147483644)(groupType=4))(member:1.2.840.113556.1.4.1941:=<SID=XXXXXX>) )";
//TAA DAA
Feel free to try these LDAP queries after substituting the SID of a user you want to retrieve all group memberships of. I figure this is similiar if not the same query as what the PowerShell Command Get-ADPrincipalGroupMembership uses behind the scenes. The command states "If you want to search for local groups in another domain, use the ResourceContextServer parameter to specify the alternate server in the other domain."
If you are familiar enough with C# and Active Directory, you should know how to perform an LDAP search using the LDAP queries provided.
Additional Documentation:
<SID> Binding String
<GUID> Binding String
If you have a LDAP connection with a username and password to connect to Active Directory, here is the code I used to connect properly:
using System.DirectoryServices.AccountManagement;
// ...
// Connection information
var connectionString = "LDAP://domain.com/DC=domain,DC=com";
var connectionUsername = "your_ad_username";
var connectionPassword = "your_ad_password";
// Get groups for this user
var username = "myusername";
// Split the LDAP Uri
var uri = new Uri(connectionString);
var host = uri.Host;
var container = uri.Segments.Count() >=1 ? uri.Segments[1] : "";
// Create context to connect to AD
var princContext = new PrincipalContext(ContextType.Domain, host, container, connectionUsername, connectionPassword);
// Get User
UserPrincipal user = UserPrincipal.FindByIdentity(princContext, IdentityType.SamAccountName, username);
// Browse user's groups
foreach (GroupPrincipal group in user.GetGroups())
{
Console.Out.WriteLine(group.Name);
}
there is a helpers class based in curtisk response:
public static class ActiveDirectoryHelpers
{
private static readonly Regex keyValuePair = new Regex($"(?<key>[^=]+)=(?<value>[^,]+),?");
public enum X500DirectorySpecification
{
/// <summary>Common Name</summary>
CN,
/// <summary>Organizational Unit</summary>
OU,
/// <summary>Domain Component</summary>
DC
}
public static IEnumerable<string> GetUserMemberOfNodeValue(this PrincipalContext principalContext, string userName, X500DirectorySpecification node)
{
return principalContext.GetUserMemberOf(userName)
.SelectMany(memberOf =>
GetUserMemberOfKeyValues(memberOf).Where(item => item.Key == node.ToString()).Select(item => item.Value));
}
private static IEnumerable<string> GetUserMemberOf(this PrincipalContext principalContext, string userName)
{
using var user = UserPrincipal.FindByIdentity(principalContext, userName);
IEnumerable<string> result = null;
if (user != null)
{
var directoryEntry = (DirectoryEntry)user.GetUnderlyingObject();
var directorySearcher = new DirectorySearcher(directoryEntry);
directorySearcher.PropertiesToLoad.Add("memberOf");
result = directorySearcher.FindOne().Properties["memberOf"].Cast<string>();
}
return result ?? Enumerable.Empty<string>();
}
private static IEnumerable<KeyValuePair<string, string>> GetUserMemberOfKeyValues(string memberOfValue)
{
return keyValuePair.Matches(memberOfValue).OfType<Match>()
.Select(item => new KeyValuePair<string, string>(item.Groups["key"].Value.Trim(), item.Groups["value"].Value));
}
}
PrincipalContext pc1 = new PrincipalContext(ContextType.Domain, "DomainName", UserAccountOU, UserName, Password);
UserPrincipal UserPrincipalID = UserPrincipal.FindByIdentity(pc1, IdentityType.SamAccountName, UserID);
searcher.Filter = "(&(ObjectClass=group)(member = " + UserPrincipalID.DistinguishedName + "));
I just want to Add a new method on an existing code below.
Method is a simply check a given User_ID if it is exists on the AD.
It's my 1st time dealing with AD.
public class AD
{
// Fields
private static string ADPassword = ConfigurationManager.AppSettings["ADPassword"].ToString();
private static string ADPath = ConfigurationManager.AppSettings["ADConnection"].ToString();
private static string ADServerName = ConfigurationManager.AppSettings["ADServerName"].ToString();
private static string ADUserName = ConfigurationManager.AppSettings["ADUserName"].ToString();
// Methods
public static string GetLogin(string sUserName, string sPassword)
{
try
{
DirectoryEntry entry = new DirectoryEntry(ADPath, ADServerName + sUserName, sPassword);
object nativeObject = entry.NativeObject;
return string.Empty;
}
catch
{
return "Invalid Username or Password";
}
}
public static string Update(string sUserName, string sOldPassword, string sNewPassword)
{
string message;
try
{
DirectoryEntry searchRoot = new DirectoryEntry();
searchRoot.Path = ADPath;
searchRoot.Username = ADServerName + ADUserName;
searchRoot.Password = ADPassword;
DirectorySearcher searcher = new DirectorySearcher(searchRoot);
searcher.Filter = "(SAMAccountName=" + sUserName + ")";
DirectoryEntry directoryEntry = searcher.FindOne().GetDirectoryEntry();
directoryEntry.Invoke("ChangePassword", new object[] { sOldPassword, sNewPassword });
directoryEntry.CommitChanges();
directoryEntry.Close();
message = string.Empty;
}
catch (Exception exception)
{
try
{
message = exception.InnerException.Message;
}
catch
{
message = exception.Message;
}
}
return message;
}
}
Which version of the .NET Framework are you on??
In .NET before 3.5, you could probably do a DirectorySearch on the whole server (or alternatively a more constrained subtree):
public bool UserExists(string userName)
{
DirectoryEntry searchRoot = new DirectoryEntry("LDAP://dc=yourcompany,dc=com", userName, password);
DirectorySearcher searchForUser = new DirectorySearcher(searchRoot);
searchForUser.SearchScope = SearchScope.SubTree;
searchForUser.Filter = string.Format("(&(objectCategory=Person)(anr={0}))", userName);
if(searchForUser.FindOne() != null)
{
return true;
}
else
{
return false;
}
}
This is just off the top of my head, can't test it right now. This will search in your entire domain - check the LDAP path for the searchRoot - it would have to be something like
LDAP://dc=yourcompany,dc=com
or if you want to search just inside the "Users" container:
LDAP://cn=Users,dc=yourcompany,dc=com
With .NET 3.5 things got a lot easier - see this MSDN Article for a lot of useful info on how to search and find users and groups in .NET 3.5 using the new System.DirectoryServices.AccountManagement namespace. You can basically now do a FindByIdentity call:
PrincipalContext ctx = new PrincipalContext(ContextType.Domain, "YOURDOMAIN");
UserPrincipal foundUser = UserPrincipal.FindByIdentity(ctx, "your user name");
and that's all there is.
Marc
If it's your first AD experience, it might be worth taking a look at this codeproject article: Howto: (Almost) Everything In Active Directory via C#. It contains lots of examples that might help you.
What do you mean exactly by User_ID? Account name? LDAP distinguished name?
I'm writing a web application which uses windows authentication and I can happily get the user's login name using something like:
string login = User.Identity.Name.ToString();
But I don't need their login name I want their DisplayName. I've been banging my head for a couple hours now...
Can I access my organisation's AD via a web application?
How about this:
private static string GetFullName()
{
try
{
DirectoryEntry de = new DirectoryEntry("WinNT://" + Environment.UserDomainName + "/" + Environment.UserName);
return de.Properties["displayName"].Value.ToString();
}
catch { return null; }
}
See related question: Active Directory: Retrieve User information
See also: Howto: (Almost) Everything In Active Directory via C# and more specifically section "Enumerate an object's properties".
If you have a path to connect to a group in a domain, the following snippet may be helpful:
GetUserProperty("<myaccount>", "DisplayName");
public static string GetUserProperty(string accountName, string propertyName)
{
DirectoryEntry entry = new DirectoryEntry();
// "LDAP://CN=<group name>, CN =<Users>, DC=<domain component>, DC=<domain component>,..."
entry.Path = "LDAP://...";
entry.AuthenticationType = AuthenticationTypes.Secure;
DirectorySearcher search = new DirectorySearcher(entry);
search.Filter = "(SAMAccountName=" + accountName + ")";
search.PropertiesToLoad.Add(propertyName);
SearchResultCollection results = search.FindAll();
if (results != null && results.Count > 0)
{
return results[0].Properties[propertyName][0].ToString();
}
else
{
return "Unknown User";
}
}
Use this:
string displayName = UserPrincipal.Current.DisplayName;
In case anyone cares I managed to crack this one:
/// This is some imaginary code to show you how to use it
Session["USER"] = User.Identity.Name.ToString();
Session["LOGIN"] = RemoveDomainPrefix(User.Identity.Name.ToString()); // not a real function :D
string ldappath = "LDAP://your_ldap_path";
// "LDAP://CN=<group name>, CN =<Users>, DC=<domain component>, DC=<domain component>,..."
Session["cn"] = GetAttribute(ldappath, (string)Session["LOGIN"], "cn");
Session["displayName"] = GetAttribute(ldappath, (string)Session["LOGIN"], "displayName");
Session["mail"] = GetAttribute(ldappath, (string)Session["LOGIN"], "mail");
Session["givenName"] = GetAttribute(ldappath, (string)Session["LOGIN"], "givenName");
Session["sn"] = GetAttribute(ldappath, (string)Session["LOGIN"], "sn");
/// working code
public static string GetAttribute(string ldappath, string sAMAccountName, string attribute)
{
string OUT = string.Empty;
try
{
DirectoryEntry de = new DirectoryEntry(ldappath);
DirectorySearcher ds = new DirectorySearcher(de);
ds.Filter = "(&(objectClass=user)(objectCategory=person)(sAMAccountName=" + sAMAccountName + "))";
SearchResultCollection results = ds.FindAll();
foreach (SearchResult result in results)
{
OUT = GetProperty(result, attribute);
}
}
catch (Exception t)
{
// System.Diagnostics.Debug.WriteLine(t.Message);
}
return (OUT != null) ? OUT : string.Empty;
}
public static string GetProperty(SearchResult searchResult, string PropertyName)
{
if (searchResult.Properties.Contains(PropertyName))
{
return searchResult.Properties[PropertyName][0].ToString();
}
else
{
return string.Empty;
}
}
There is a CodePlex project for Linq to AD, if you're interested.
It's also covered in the book LINQ Unleashed for C# by Paul Kimmel - he uses the above project as his starting point.
not affiliated with either source - I just read the book recently