I want run my program under a limited user account but with administrator privileges on windows XP.
I can't find an answer. I think I can use two ways:
Run my program by another way like a program or a service
Run my function with some method like PrincipalPermission space or something like this
But I can't solve this problem.
Have you looked at the "runas" command? For example:
C:\> runas /noprofile /netonly /user:MYCOMPUTER\testuser "C:\Program Files\My Special Program\Program.exe"
I want run my program under a
limited user account but with
administrator privileges.
This can't be done. A limited user doesn't have admin privileges. You need to run it as an admin user with, e.g. runas.
One way to solve this is to fragment your program into two parts. One part as a windows service and the one as a user app. You can set the service to run as a Network Service, Local Service or Local System depending the level of access you need. Anything that needs administrator privileges will be performed by the Windows service. The user app can be responsible for showing the user interface and other similar things. You need to have some kind of IPC (Inter process communication) between your applications to facilitate this as well.
Related
So I have made a program that requires administrator permissions every time you run it. Is there a way to give it permanent administrator permissions after you give the permissions once. So basically the first time you run the application, it asks for administrator permissions and if you run in a second time, it wouldn't ask for them again. Is this even possible at all and if so, can I do this programmatically?
Thanks
No, you cannot.
The only thing you could do is implement parts of your program in a NT service. Set the service configuration to "start manually" and change the ACL to allow any user to start the service.
Your program would then use the service to perform the tasks that require elevation.
If you choose this route, you have to be careful so that you don't introduce security holes in the system. Only allow predetermined actions, not arbitrary commands nor write operations...
I am trying to run my c# exe as an system account. How can I do that. I've tried <requestedExecutionlevel level="requireAdministrator"> and <requestedExecutionlevel level="requireSystem"> The administrator is working but the second one is not working.
Please help me how can I do this.
To the best of my knowledge you can not force your app to run as SYSTEM. Either your app must be a service and the service is setup to run as System or you must use a tool like PsExec to launch your executable as system.
psexec.exe -i -s YourProgram.exe
When using requestedExecutionlevel the only 3 valid options are
requireAdministrator - prompt for UAC always (even if the user is not an administrator).
asInvoker - never prompt for UAC.
highestAvailable - prompt for UAC if the user is a member of the Administrators group but do not prompt and run as a normal user if the user is not a member of the group.
It's not directly possible. There are hacky ways if you are an administrator (like getting the security token from an already running service or something), but I far from recommend using those.
The point of the SYSTEM account is precisely that: that it's only run directly by the system.
If you want an easy-hacky-way without third-party tools (like psexec), you could set up a ONEEVENT scheduled task (with schtasks, which is part of the OS), which can indeed run with the system account. This would still need two processes (although it could be the same exe with different command line parameters for the task and for setting it up), but it'd work.
I've been wrestling with this issue for a few days and can't find any posts that solve it for me. Maybe what I want isn't possible.
We have developed a WinForms application for internal use at our company.
Most employees do not have admin access in windows.
Our application requires admin access to the machine and needs to automatically start when the user logs on.
Here's what I've tried:
1) Putting a Shortcut in the Startup folder
I can get the app to automatically launch (using a relauncher), but it still requires an admin to be at the computer on every restart (to enter the password).
2) Registry Key
I created a Software\Microsoft\Windows\CurrentVersion\Run registry key to automatically start the application. Whether I run the relauncher or the app itself, UAC demands a password on every restart (or relogin).
3) Scheduled Task
I created a scheduled task to automatically start the app on logon using admin permissions on the machine (under use the following account). I also checked the 'Run with highest privileges' box. UAC still pops up on every restart.
4) Windows Service
I tried to run the app as a windows service, but it has a user interface (which is disabled by windows services).
5) Disable UAC for Specific Program
It looks like you can disable UAC for a specific program but that involves downloading the Application Compatibility Toolkit, creating some kind of database, etc. I'd very much prefer that our IT staff wouldn't have to do that at every machine. At this point, it's probably my only option.
It seems like an admin should be able to install an application so that it runs automatically without a prompt. Am I missing a way to do this?
You should make split your program into a non-admin UI, which runs on user startup, and an admin service, which performs the administrative tasks.
To run admin-requiring code from the UI, use WCF to ask the service to do it.
Beware that hostile parties may impersonate the UI and ask the service to do malicious things; you need to carefully figure out what the service should be able to do in response to IPC calls.
Your problem is not a UAC problem, it is a security problem.
And the answer depends on what your application that "requires admin rights" needs to do.
If your application needs to be able to start, and stop services, then the User needs the ability to start and stop services. In which case you need to give the users that privilege.
If the user's need the ability to alter or delete files, then they need that privilege too. In that case it is easier to grant Full Control permissions to Everyone.
If your application needs the ability to modify registry keys in the HKLM tree then you can, again, grant Full Control to Everyone in the registry.
If you need your users to have the ability to modify items, then they need permissions to modify those locations. Granting them those NTFS permissions is not a bad thing; it is exactly what those permissions exist for - to control access.
But why
But then we ask why? What is it you're doing that users need all the rights of an administrator, and all capabilities of an administrator, all the power of an administrator, but you don't want to make them a member of the Administrator's group?
The answer is almost invariably that your internal use application doesn't need to run as an administrator.
What Would XP Do?
The question becomes:
What would you do on Windows XP?
A standard user on Windows XP didn't even have the UAC convenience feature. If a user wanted to run an application an administrator: they had to logout and login as an administrator. How did, or how would, the application work on a system with UAC disabled?
Presumably very little of your application needs to run as admin - the rest would be better running as the unprivileged user. This is very common (think self-updating browsers, for example).
The proper way to do this is to install a service to do the privileged bit, and have the UI communicate with the service.
Our application requires admin access to the machine ...
Why?
You cannot bypass the UAC prompt, and this is by design.
See FAQ: Why can’t I bypass the UAC prompt? for a good discussion of why. Excerpt:
If it were possible to mark an application to run with silently-elevated privileges, what would become of all those apps out there with LUA bugs? Answer: they'd all be marked to silently elevate. How would future software for Windows be written? Answer: To silently elevate. Nobody would actually fix their apps, and end-user applications will continue to require and run with full administrative permissions unnecessarily.
I didnt get correct answer and got lots of answers like "we can not do like this" for my previous questions.
Thats why I decided to explain in detail about my problem please help me if you can or please ask your friend who can answer this.
Now my problem:
Step 1:
I created a C# program which edits various windows registries.
For editing windows registries we must have an Admin privilege.
My program is running fine in Administrator mode without any problem.
Step 2:
I want my program to be run into limited user mode also. If few people didnt get what I am saying here is that I want to run my above C# code into Guest mode.
In guest mode there is a restriction that We can not change Windows Registries.
So as I am executing my Application, I am getting one notification which is asking for Admin Password.
After inserting Admin Password my application is working fine.
Step 3:
I want that my application must not ask Admin password every time in Guest/limited account.
I also want that in Guest mode my Application should work.
I also want that in Guest mode my Application should be able to access and change Windows Registries.
Step 4:
Lot of people replied me that we can not do this in Guest mode since Windows is restricting users to edit windows registries for security purpose. So please if you also feel like this then please do not reply to this question.
I am answering to those people that, all good antivirus which run into Guest mode has access to Windows Registries.
Step 5:
Since I know Admin Password so is there any way of saving Admin password in our C# code and bypass popup message of asking Admin password again and again.
Is there any way that we will instruct Windows that our application will be running in Admin mode and do not ask for Admin password again and again
How Antivirus application running in Guest mode do all the operation like deleting virus from system32 folder and resetting registries after Virus attack. These antivirus application never asks for "We found a virus in System32 folder, Since I am running in Guest mode and unable to delete virus, so please enter Admin password so that I can delete virus"
I hope you understood what i mean to ask?
I want to develop a C# application which should run in any mode (Admin/Guest/Limited) and should be able to Create, Edit and Delete Windows Registries.
Note: Please do not answer this with "right click and Run As Administrator".
To the best of my knowledge, antivirus software solves this problem by running two (or more) processes: a user interface program running as the guest user, and a privileged process (usually a Windows service). The user program is not able to actually manipulate privilege-restricted resources (like secure registry hives) -- instead, it communicates with the privileged process (hopefully in some secure way) and the privileged process performs the privileged action on behalf of the user.
This is the same kind of technique by which programs ever access privileged resources, such as hardware. Your user-level process doesn't (usually) have the right to perform various hardware actions, like remapping memory in the MMU, but the OS does, and you can get the OS to do what you want by asking it to. System calls thunk into kernel mode, which is fully privileged. However, the system call interface limits the kinds of privileged actions which you can take.
I cant help but saying, NO, you cant do admin things under a guest account. And no- you cant programmatically bypass UAC.
Maybe the following 2 workarounds are interresting for you?
I believe antivirus software runs under the System account (can only be installed by an administrator). For your application, you can create a server/client architecture (both running no the same machine) where the server is installed by the administrator (as part of the whole package) and runs by default under the System account. Then you can use the client on the quest account to send commands to the server.
One other solution might be not to use the registry directly but use another underlying datastore which is accessible by a guest account and synchronize that on demand with the registry (startup and shutdown?), so you only need the admin to login once or twice during the run of your app.
I need one of my .exe to always run as administrator without UAC prompt. My program will be installed with setup, which will have for one time admin rights, and I need to perform such step in this setup that my exe will be always executed as admin without UAC prompt.
I've found 2 solutions so far:
1.
Use custom service, which will elevate the program for me.
2.
Use Task Scheduler.
Is there any other solution? Some manifest probably?
Thanks.
If it were possible to do this, then UAC would be completely ineffective. The inability of applications to elevate themselves without user consent is the fundamental principle behind UAC.
Aside from already having an elevated process that launches it (i.e. service or task scheduler), the answer is no, it can't be done.
Of course what you are supposed to do if you want to just drive UI is to use the UI access flag in your manifest (see http://msdn.microsoft.com/en-us/library/ms742884.aspx). If you install your application in a trusted location (e.g. system32) and it is signed (bleh!) then when you run your application it will be elevated to high (for an admin account).
The signing requirement makes it slightly annoying but at least it reduces slightly the attack surface as your code gets run with high integrity but not with an administrator token.