Related
I need to send the value I receive from the model with this link, the proposalName field must be in quotes.How can I do it?
Here is my service url.
string path = string.Format("{ProposalId:{proposalId},ProposalName:{"proposalName"},VendorId:{vendorId}}",
Uri.EscapeDataString(proposalId.ToString()),
Uri.EscapeDataString(proposalName),
Uri.EscapeDataString(vendorId.ToString()));
You can simply put quotes around by escaping the quotes, like this -
string path = string.Format("{{0},ProposalName:\"{1}\",VendorId:{2}}",
Uri.EscapeDataString(proposalId.ToString()),
Uri.EscapeDataString(proposalName),
Uri.EscapeDataString(vendorId.ToString()));
As per your updated question, if you need to pass double quotes in URL, you need to encode it to %22
You can also use URI which allows a lot of flexibility with urls. For example -
Uri myUri = new Uri("http://google.com/search?hl=en&q=\"query with quotes\"");
Going with your example - Replace EscapeDataString with Uri.EscapeUriString. It will escape the chracter to form a valid URL. " will get replaced by %22
Some suggestions here and here-
Your problem exactlly in the {"1"} part. The double quotation mark " should be outside the {}, not inside them.
here is the fixed code.
string path = string.Format("{{0},ProposalName:\"{1}\",VendorId:{2}}",
Uri.EscapeDataString(proposalId.ToString()),
Uri.EscapeDataString(proposalName),
Uri.EscapeDataString(vendorId.ToString()));
or
string path = string.Format(#"{{0},ProposalName:""{1}"",VendorId:{2}}",
Uri.EscapeDataString(proposalId.ToString()),
Uri.EscapeDataString(proposalName),
Uri.EscapeDataString(vendorId.ToString()));
and if you are using C# 6 then you can write it as following
string path = $"{Uri.EscapeDataString(proposalId.ToString())},ProposalName:\"{Uri.EscapeDataString(proposalName)}\",VendorId:{Uri.EscapeDataString(vendorId.ToString())}";
This might do the trick for you
\"{1}\"
instead of
{"1"}
because you can put \ symbol to indicate escape sequence followed by a reserved characters
So
string.Format("{{{0},ProposalName:\"{1}\",VendorId:{2}}}",
I think escaping the quotes and placing them outside the brackets will work:
"{{0},ProposalName:\"{1}\",VendorId:{2}}"
Depending on the C# version, you can also do it like this, which I often think is an easier and cleaner way to do it:
string path = $"{proposalId},ProposalName:\"{proposalName}\",VendorId:{vendorId}";
You have two problems:
Wrong quotation (should be outside the braces {...} and escaped)
Incorrect { and } escape: {{ means just a single '{' in a formatting string
Should be
string path = string.Format("{{{0},ProposalName:\"{1}\",VendorId:{2}}}",
please, notice
escaped quotations \" which are outside {1}
tripled curly braces{{{ and }}}
Edit: in your edited question you have the same errors:
string format =
"http://mobile.teklifdosyam.com/VendorReport/GetListProposalService?&page=1&start=0&limit=10&filter=" +
"{{ProposalId:{0},ProposalName:\"{1}\",VendorId:{2}}}";
string path = string.Format(format,
Uri.EscapeDataString(proposalId.ToString()),
Uri.EscapeDataString(proposalName),
Uri.EscapeDataString(vendorId.ToString()));
please, notice escaped quotations \" which are outside the {1}, double '{{' and tripled '}}}'. When formatting you have to use numbers as place holders: so {"proposalName"} must be changed into {0}
Is there an easy way to create a multiline string literal in C#?
Here's what I have now:
string query = "SELECT foo, bar"
+ " FROM table"
+ " WHERE id = 42";
I know PHP has
<<<BLOCK
BLOCK;
Does C# have something similar?
You can use the # symbol in front of a string to form a verbatim string literal:
string query = #"SELECT foo, bar
FROM table
WHERE id = 42";
You also do not have to escape special characters when you use this method, except for double quotes as shown in Jon Skeet's answer.
It's called a verbatim string literal in C#, and it's just a matter of putting # before the literal. Not only does this allow multiple lines, but it also turns off escaping. So for example you can do:
string query = #"SELECT foo, bar
FROM table
WHERE name = 'a\b'";
This includes the line breaks (using whatever line break your source has them as) into the string, however. For SQL, that's not only harmless but probably improves the readability anywhere you see the string - but in other places it may not be required, in which case you'd either need to not use a multi-line verbatim string literal to start with, or remove them from the resulting string.
The only bit of escaping is that if you want a double quote, you have to add an extra double quote symbol:
string quote = #"Jon said, ""This will work,"" - and it did!";
As a side-note, with C# 6.0 you can now combine interpolated strings with the verbatim string literal:
string camlCondition = $#"
<Where>
<Contains>
<FieldRef Name='Resource'/>
<Value Type='Text'>{(string)parameter}</Value>
</Contains>
</Where>";
The problem with using string literal I find is that it can make your code look a bit "weird" because in order to not get spaces in the string itself, it has to be completely left aligned:
var someString = #"The
quick
brown
fox...";
Yuck.
So the solution I like to use, which keeps everything nicely aligned with the rest of your code is:
var someString = String.Join(
Environment.NewLine,
"The",
"quick",
"brown",
"fox...");
And of course, if you just want to logically split up lines of an SQL statement like you are and don't actually need a new line, you can always just substitute Environment.NewLine for " ".
One other gotcha to watch for is the use of string literals in string.Format. In that case you need to escape curly braces/brackets '{' and '}'.
// this would give a format exception
string.Format(#"<script> function test(x)
{ return x * {0} } </script>", aMagicValue)
// this contrived example would work
string.Format(#"<script> function test(x)
{{ return x * {0} }} </script>", aMagicValue)
Why do people keep confusing strings with string literals? The accepted answer is a great answer to a different question; not to this one.
I know this is an old topic, but I came here with possibly the same question as the OP, and it is frustrating to see how people keep misreading it. Or maybe I am misreading it, I don't know.
Roughly speaking, a string is a region of computer memory that, during the execution of a program, contains a sequence of bytes that can be mapped to text characters. A string literal, on the other hand, is a piece of source code, not yet compiled, that represents the value used to initialize a string later on, during the execution of the program in which it appears.
In C#, the statement...
string query = "SELECT foo, bar"
+ " FROM table"
+ " WHERE id = 42";
... does not produce a three-line string but a one liner; the concatenation of three strings (each initialized from a different literal) none of which contains a new-line modifier.
What the OP seems to be asking -at least what I would be asking with those words- is not how to introduce, in the compiled string, line breaks that mimick those found in the source code, but how to break up for clarity a long, single line of text in the source code without introducing breaks in the compiled string. And without requiring an extended execution time, spent joining the multiple substrings coming from the source code. Like the trailing backslashes within a multiline string literal in javascript or C++.
Suggesting the use of verbatim strings, nevermind StringBuilders, String.Joins or even nested functions with string reversals and what not, makes me think that people are not really understanding the question. Or maybe I do not understand it.
As far as I know, C# does not (at least in the paleolithic version I am still using, from the previous decade) have a feature to cleanly produce multiline string literals that can be resolved during compilation rather than execution.
Maybe current versions do support it, but I thought I'd share the difference I perceive between strings and string literals.
UPDATE:
(From MeowCat2012's comment) You can. The "+" approach by OP is the best. According to spec the optimization is guaranteed: http://stackoverflow.com/a/288802/9399618
Add multiple lines : use #
string query = #"SELECT foo, bar
FROM table
WHERE id = 42";
Add String Values to the middle : use $
string text ="beer";
string query = $"SELECT foo {text} bar ";
Multiple line string Add Values to the middle: use $#
string text ="Customer";
string query = $#"SELECT foo, bar
FROM {text}Table
WHERE id = 42";
You can use # and "".
string sourse = #"{
""items"":[
{
""itemId"":0,
""name"":""item0""
},
{
""itemId"":1,
""name"":""item1""
}
]
}";
In C# 11 [2022], you will be able to use Raw String literals.
The use of Raw String Literals makes it easier to use " characters without having to write escape sequences.
Solution for OP:
string query1 = """
SELECT foo, bar
FROM table
WHERE id = 42
""";
string query2 = """
SELECT foo, bar
FROM table
WHERE id = 42
and name = 'zoo'
and type = 'oversized "jumbo" grand'
""";
More details about Raw String Literals
See the Raw String Literals GitHub Issue for full details; and Blog article C# 11 Preview Updates – Raw string literals, UTF-8 and more!
I haven't seen this, so I will post it here (if you are interested in passing a string you can do this as well.) The idea is that you can break the string up on multiple lines and add your own content (also on multiple lines) in any way you wish. Here "tableName" can be passed into the string.
private string createTableQuery = "";
void createTable(string tableName)
{
createTableQuery = #"CREATE TABLE IF NOT EXISTS
["+ tableName + #"] (
[ID] INTEGER NOT NULL PRIMARY KEY AUTOINCREMENT,
[Key] NVARCHAR(2048) NULL,
[Value] VARCHAR(2048) NULL
)";
}
Yes, you can split a string out onto multiple lines without introducing newlines into the actual string, but it aint pretty:
string s = $#"This string{
string.Empty} contains no newlines{
string.Empty} even though it is spread onto{
string.Empty} multiple lines.";
The trick is to introduce code that evaluates to empty, and that code may contain newlines without affecting the output. I adapted this approach from this answer to a similar question.
There is apparently some confusion as to what the question is, but there are two hints that what we want here is a string literal not containing any newline characters, whose definition spans multiple lines. (in the comments he says so, and "here's what I have" shows code that does not create a string with newlines in it)
This unit test shows the intent:
[TestMethod]
public void StringLiteralDoesNotContainSpaces()
{
string query = "hi"
+ "there";
Assert.AreEqual("hithere", query);
}
Change the above definition of query so that it is one string literal, instead of the concatenation of two string literals which may or may not be optimized into one by the compiler.
The C++ approach would be to end each line with a backslash, causing the newline character to be escaped and not appear in the output. Unfortunately, there is still then the issue that each line after the first must be left aligned in order to not add additional whitespace to the result.
There is only one option that does not rely on compiler optimizations that might not happen, which is to put your definition on one line. If you want to rely on compiler optimizations, the + you already have is great; you don't have to left-align the string, you don't get newlines in the result, and it's just one operation, no function calls, to expect optimization on.
If you don't want spaces/newlines, string addition seems to work:
var myString = String.Format(
"hello " +
"world" +
" i am {0}" +
" and I like {1}.",
animalType,
animalPreferenceType
);
// hello world i am a pony and I like other ponies.
You can run the above here if you like.
using System;
namespace Demo {
class Program {
static void Main(string[] args) {
string str = #"Welcome User,
Kindly wait for the image to
load";
Console.WriteLine(str);
}
}
}
Output
Welcome User,
Kindly wait for the image to
load
I have a string property that returns a directory, it has "program file//" in it, so to use it in a command prompt, I have to use quotation mark around the string. But if I do the following
string myDic = someDic;
string myCmdPrptDic = '\u0022' + someDic + "\u0022'
myCmdPrptDic ends up like \"C://Program Files//myApp\" and will not work under cmd prompt. Is there a way to just create "C://Program Files//myApp" only? Or maybe I should just use a stringBuilder....
I just need to generate a string like:
copy //data/file// "C://program files//myapp"
but I could not do it as
string = "copy //data//file" +" "+ '\u0022' + someDic + "\u0022';
Are you sure that is actually what your string is and not just the way you are viewing it? In the watch window of VS debugger it puts strings in double quotes already which means it needs to escape any quotes inside it. As it stands the above code will not put the \ into your string. If it really is in there (and not just a misreading of the debug information) then there is some other code somewhere adding it in.
Your quotes " and ' are mis-matched.
I have written code in C# which is exceeding page width, so I want it to be broken into next line according to my formatting. I tried to search a lot to get that character for line break but was not able to find out.
In VB.NET I use '_' for line break, same way what is used in C#?
I am trying to break a string.
In C# there's no 'new line' character like there is in VB.NET. The end of a logical 'line' of code is denoted by a ';'. If you wish to break the line of code over multiple lines, just hit the carriage return (or if you want to programmatically add it (for programmatically generated code) insert 'Environment.NewLine' or '\r\n'.
Edit: In response to your comment: If you wish to break a string over multiple lines (i.e. programmatically), you should insert the Environment.NewLine character. This will take the environment into account in order to create the line ending. For instance, many environments, including Unix/Linux only use a NewLine character (\n), but Windows uses both carriage return and line feed (\r\n). So to break a string you would use:
string output = "Hello this is my string\r\nthat I want broken over multiple lines."
Of course, this would only be good for Windows, so before I get flamed for incorrect practice you should actually do this:
string output = string.Format("Hello this is my string{0}that I want broken over multiple lines.", Environment.NewLine);
Or if you want to break over multiple lines in your IDE, you would do:
string output = "My string"
+ "is split over"
+ "multiple lines";
Option A: concatenate several string literal into one:
string myText = "Looking up into the night sky is looking into infinity" +
" - distance is incomprehensible and therefore meaningless.";
Option B: use a single multiline string literal:
string myText = #"Looking up into the night sky is looking into infinity
- distance is incomprehensible and therefore meaningless.";
With option B, the newline character(s) will be part of the string saved into variable myText. This might, or might not, be what you want.
result = "Minimum MarketData"+ Environment.NewLine
+ "Refresh interval is 1";
Use # symbol before starting the string.
like
string s = #"this is a really
long string
and this is
the rest of it";
If I am understanding this correctly, you should be able to break the string into substrings to accomplish this.
i.e.:
string s = "this is a really long string" +
"and this is the rest of it";
C# doesn't have an explicit line break character. You statements end with a semicolon so you can span your statements over many lines. These are both the same:
public string GenerateString()
{
return "abc" + "def";
}
public string GenerateString()
{
return
"abc" +
"def";
}
All you need to do is add \n or to write on files go \r\n.
Examples:
say you wanted to write duck(line break) cow this is how you would do it
Console.WriteLine("duck\n cow");
Edit: I think I didn't understand the question. You can use
#"duck
cow".Replace("\r\n", "")
as a linebreak in code, that produces \r\n which is used Windows.
C# code can be split between lines on pretty much any syntatic construct without a need for a '_' style construct.
For example
foo.
Bar(
42
, "again");
dt = abj.getDataTable(
"select bookrecord.userid,usermaster.userName, "
+" book.bookname,bookrecord.fromdate, "
+" bookrecord.todate,bookrecord.bookstatus "
+" from book,bookrecord,usermaster "
+" where bookrecord.bookid='"+ bookId +"' "
+" and usermaster.userId=bookrecord.userid "
+" and book.bookid='"+ bookId +"'");
guys.. use resources for long strings in code behind!!
also.. you don't need an _ for codeline breaks in C#. In VB the codelines end with a newline character (or a ':'), using the the _ would tell the parser it has not reached the end of the line yet. The codeline in C# ends with a ';' so you can use newlines to styleformat your code.
Strings are immutable, so using
public string GenerateString()
{
return
"abc" +
"def";
}
will slow you performance - each of those values is a string literal which must be concatenated at runtime - bad news if you reuse the method/property/whatever alot...
Store your string literals in resources is a good idea...
public string GenerateString()
{
return Resources.MyString;
}
That way it is localisable and the code is tidy (although performance is pretty terrible).
A string variable str contains the following somewhere inside it: se\">
I'm trying to find the beginning of it using:
str.IndexOf("se\\\">")
which returns -1
Why isn't it finding the substring?
Note: due to editing the snippet showed 5x \ for a while, the original had 3 in a row.
Your code is in fact searching for 'se\\">'. When searching for strings including backslashes I usually find it easier to use verbatim strings:
str.IndexOf(#"se\"">")
In this case you also have a quote in the search string, so there is still some escaping, but I personally find it easier to read.
Update: my answer was based on the edit that introduced extra slashes in the parameter to the IndexOf call. Based on current version, I would place my bet on str simply not containing the expected character sequence.
Update 2:
Based on the comments on this answer, it seems to be some confusion regarding the role of the '\' character in the strings. When you inspect a string in the Visual Studio debugger, it will be displayed with escaping characters.
So, if you have a text box and type 'c:\' in it, inspecting the Text property in the debugger will show 'c:\\'. An extra backslash is added for escaping purposes. The actual string content is still 'c:\' (which can be verified by checking the Length property of the string; it will be 3, not 4).
If we take the following string (taken from the comment below)
" '<em
class=\"correct_response\">a
night light</em><br
/><br /><table
width=\"100%\"><tr><td
class=\"right\">Ingrid</td></tr></table>')"
...the \" sequences are simply escaped quotation marks; the backslashes are not part of the string content. So, you are in fact looking for 'se">', not 'se\">'. Either of these will work:
str.IndexOf(#"se"">"); // verbatim string; escape quotation mark by doubling it
str.IndexOf("se\">"); // regular string; escape quotation mark using backslash
This works:
string str = "<case\\\">";
int i = str.IndexOf("se\\\">"); // i = 3
Maybe you're not correctly escaping one of the two strings?
EDIT there's an extra couple of \ in the string you are searching for.
Maybe the str variable does not actually contain the backslash.
It may be just that when you mouse over the variable while debugging, the debugger tooltip will show the escape character.
e.g. If you put a breakpoint after this assignment
string str = "123\"456";
the tooltip will show 123\"456 and not 123"456.
However if you click on the visualize icon, you will get the correct string 123"456
Following code:
public static void RunSnippet()
{
string s = File.ReadAllText (#"D:\txt.txt");
Console.WriteLine (s);
int i = s.IndexOf("se\\\">");
Console.WriteLine (i);
}
Gives following output:
some text before se\"> some text after
17
Seems like working to me...
TextBox2.Text = TextBox1.Text.IndexOf("se\"">")
seems to work in VB.
DoubleQuotes within a string need to be specified like "" Also consider using verbatim strings - So an example would be
var source = #"abdefghise\"">jklmon";
Console.WriteLine(source.IndexOf(#"se\"">")); // returns 8
If you are looking for se\">
then
str.IndexOf(#"se\"">")
is less error-prone. Note the double "" and single \
Edit, after the comment: it seems like the string may contain ecaping itself, in which case in se\"> the \" was an escaped quote, so the literal text is simply se"> and the string to use is Indexof("se\">")