I am unable to understand the execution of the code given below. When we call the function DisplayRev() it is going to check the length of argument, then it is going to separate the first index, and then function is executed again with remaining string. The last statements are not going to execute till string length is greater than zero.
What is the functionality of Console.Write(str[0]); and when it is going to execute?
class RevStr {
// Display a string backward.
public void DisplayRev(string str) {
if (str.Length > 0)
DisplayRev(str.Substring(1, str.Length - 1));
else
return;
Console.Write(str[0]);
}
}
class RevStrDemo {
static void Main() {
string s = "this is a test";
RevStr rsOb = new RevStr();
Console.WriteLine("Original string:"+s);
Console.Write("Reversed string: ");
rsOb.DisplayRev(s);
Console.WriteLine();
}
}
It's easy to follow really. Suppose you call the function like this:
DisplayRev("Hello");
The length of the string is 5 (which is greater than 0), so it calls itself, passing in a new string. This new string is the original string minus the first letter, so the call becomes:
DisplayRev("ello");
Then it does it again, following the same process:
DisplayRev("llo");
Then:
DisplayRev("lo");
Then:
DisplayRev("o");
Now comes the magic part. It starts to write the first letter in the string:
So DisplayRev("o"); writes o. Then the function returns and the DisplayRev("lo"); writes the first letter l. So no your screen shows ol. Then the function returns and the DisplayRev("llo"); writes the first letter l and the screen shows oll, then the function returns and the DisplayRev("ello"); prints the first letter, e. Now the screen shows olle. Finally, the original call prints the first letter, 'H' and the screen shows olleH.
By the way, this is good for learning how recursion works, but there are easier ways to reverse a string, such as:
string reverseValue = new string(original.Select((c, index) => new { c, index })
.OrderByDescending(x => x.index)
.Select(x => x.c)
.ToArray());
As the function calls itself recursively, each letter will wait for the rest of the string to be processed before it writes out, which leads to the string being written in reverse.
The length of 0 is the termination condition which causes all of the previous values to be able to complete their execution in reverse order.
Think of it like the the stack, or if you're new to programming in general, like a stack of plates in a rack. You bring them out of the kitchen in a stack (the original order of the letters) and then one at a time you place them onto the rack. When it comes time to use the plates, the bottom one, despite originally being first, has to wait for everything on top of it to be used first, so the order is reversed.
The best thing to do is to step through in a trace and you should be able to understand the problem.
I think it's a good idea to look at a simple example: DisplayRev("CAT").
This first does DisplayRev("AT") and then it prints C. So printing C will be the last thing the method does.
In the same way, DisplayRev("AT") first does DisplayRev("T") and then it prints A (but this happens before C is printed).
DisplayRev("T") first does DisplayRev("") and then it prints T (but this happens before A or C are printed).
DisplayRev("") doesn't print anything because the length if the string is zero.
Therefore we see that the method will print the letters in reverse order.
If you pass it a string like "ABCDEF" it will write "FEDCBA" on the console.
Yesterday at work I set out to figure out how to sort numbers without using the library method Array.Sort. I worked on and off when time permitted and finally was able to come up with a basic working algorithm at the end of today. It might be rather stupid and the slowest way, but I am content that I have a working code.
But there is something wrong or missing in the logic, that is causing the output to hang before printing the line: Numbers Sorted. (12/17/2011 2:11:42 AM)
This delay is directly proportionate to the number of elements in the array. To be specific, the output just hangs at the position where I put the tilde in the results section below. The content after tilde is getting printed after that noticeable delay.
Here is the code that does the sort:
while(pass != unsortedNumLen)
{
for(int i=0,j=1; i < unsortedNumLen-1 && j < unsortedNumLen; i++,j++)
{
if (unsorted[i] > unsorted[j])
{
pass = 0;
swaps++;
Console.Write("Swapping {0} and {1}:\t", unsorted[i], unsorted[j]);
tmp = unsorted[i];
unsorted[i] = unsorted[j];
unsorted[j] = tmp;
printArray(unsorted);
}
else pass++;
}
}
The results:
Numbers unsorted. (12/17/2011 2:11:19 AM)
4 3 2 1
Swapping 4 and 3: 3 4 2 1
Swapping 4 and 2: 3 2 4 1
Swapping 4 and 1: 3 2 1 4
Swapping 3 and 2: 2 3 1 4
Swapping 3 and 1: 2 1 3 4
Swapping 2 and 1: 1 2 3 4
~
Numbers sorted. (12/17/2011 2:11:42 AM)
1 2 3 4
Number of swaps: 6
Can you help identify the issue with my attempt?
Link to full code
This is not homework, just me working out.
Change the condition in your while to this:
while (pass < unsortedNumLen)
Logically pass never equals unsortedNumLen so your while won't terminate.
pass does eventually equal unsortedNumLen when it goes over the max value of an int and loops around to it.
In order to see what's happening yourself while it's in the hung state, just hit the pause button in Visual Studio and hover your mouse over pass to see that it contains a huge value.
You could also set a breakpoint on the while line and add a watch for pass. That would show you that the first time the list is sorted, pass equals 5.
It sounds like you want a hint to help you work through it and learn, so I am not posting a complete solution.
Change your else block to the below and see if it puts you on the right track.
else {
Console.WriteLine("Nothing to do for {0} and {1}", unsorted[i], unsorted[j]);
pass++;
}
Here is the fix:
while(pass < unsortedNumLen)
And here is why the delay occurred.
After the end of the for loop in which the array was eventually sorted, pass contains at most unsortedNumLen - 2 (if the last change was between first and second members). But it does not equal the unsorted array length, so another iteration of while and inner for starts. Since the array is sorted unsorted[i] > unsorted[j] is always false, so pass always gets incremented - exactly the number of times j got incremented, and that is the unsortedNumLen - 1. Which is not equal to unsortedNumLen, and so another iteration of while begins. Nothing essentially changed, and after this iteration pass contains 2 * (unsortedNumLen - 1), which is still not equal to unsortedNumLen. And so on.
When pass reaches value int.MaxValue, it the overflow happens, and next value the variable pass will get is int.MinValue. And the process goes on, until pass finally gets the value unsortedNumLen at the moment the while condition is checked. If you are particularly unlucky, this might never happen at all.
P.S. You might want to check out this link.
This is just a characteristic of the algorithm you're using to sort. Once it's completed sorting the elements it has no way of knowing the sort is complete, so it does one final pass checking every element again. You can fix this by adding --unsortedNumLen; at the end of your for loop as follows:
for(int i=0,j=1; i < unsortedNumLen-1 && j < unsortedNumLen; i++,j++)
{
/// existing sorting code
}
--unsortedNumLen;
Reason? Because you algorithm is bubbling the biggest value to the end of the array, there is no need to check this element again since it's already been determined to be larger the all other elements.
Possible Duplicates:
While vs. Do While
When should I use do-while instead of while loops?
I've been programming for a while now (2 years work + 4.5 years degree + 1 year pre-college), and I've never used a do-while loop short of being forced to in the Introduction to Programming course. I have a growing feeling that I'm doing programming wrong if I never run into something so fundamental.
Could it be that I just haven't run into the correct circumstances?
What are some examples where it would be necessary to use a do-while instead of a while?
(My schooling was almost all in C/C++ and my work is in C#, so if there is another language where it absolutely makes sense because do-whiles work differently, then these questions don't really apply.)
To clarify...I know the difference between a while and a do-while. While checks the exit condition and then performs tasks. do-while performs tasks and then checks exit condition.
If you always want the loop to execute at least once. It's not common, but I do use it from time to time. One case where you might want to use it is trying to access a resource that could require a retry, e.g.
do
{
try to access resource...
put up message box with retry option
} while (user says retry);
do-while is better if the compiler isn't competent at optimization. do-while has only a single conditional jump, as opposed to for and while which have a conditional jump and an unconditional jump. For CPUs which are pipelined and don't do branch prediction, this can make a big difference in the performance of a tight loop.
Also, since most compilers are smart enough to perform this optimization, all loops found in decompiled code will usually be do-while (if the decompiler even bothers to reconstruct loops from backward local gotos at all).
I have used this in a TryDeleteDirectory function. It was something like this
do
{
try
{
DisableReadOnly(directory);
directory.Delete(true);
}
catch (Exception)
{
retryDeleteDirectoryCount++;
}
} while (Directory.Exists(fullPath) && retryDeleteDirectoryCount < 4);
Do while is useful for when you want to execute something at least once. As for a good example for using do while vs. while, lets say you want to make the following: A calculator.
You could approach this by using a loop and checking after each calculation if the person wants to exit the program. Now you can probably assume that once the program is opened the person wants to do this at least once so you could do the following:
do
{
//do calculator logic here
//prompt user for continue here
} while(cont==true);//cont is short for continue
This is sort of an indirect answer, but this question got me thinking about the logic behind it, and I thought this might be worth sharing.
As everyone else has said, you use a do ... while loop when you want to execute the body at least once. But under what circumstances would you want to do that?
Well, the most obvious class of situations I can think of would be when the initial ("unprimed") value of the check condition is the same as when you want to exit. This means that you need to execute the loop body once to prime the condition to a non-exiting value, and then perform the actual repetition based on that condition. What with programmers being so lazy, someone decided to wrap this up in a control structure.
So for example, reading characters from a serial port with a timeout might take the form (in Python):
response_buffer = []
char_read = port.read(1)
while char_read:
response_buffer.append(char_read)
char_read = port.read(1)
# When there's nothing to read after 1s, there is no more data
response = ''.join(response_buffer)
Note the duplication of code: char_read = port.read(1). If Python had a do ... while loop, I might have used:
do:
char_read = port.read(1)
response_buffer.append(char_read)
while char_read
The added benefit for languages that create a new scope for loops: char_read does not pollute the function namespace. But note also that there is a better way to do this, and that is by using Python's None value:
response_buffer = []
char_read = None
while char_read != '':
char_read = port.read(1)
response_buffer.append(char_read)
response = ''.join(response_buffer)
So here's the crux of my point: in languages with nullable types, the situation initial_value == exit_value arises far less frequently, and that may be why you do not encounter it. I'm not saying it never happens, because there are still times when a function will return None to signify a valid condition. But in my hurried and briefly-considered opinion, this would happen a lot more if the languages you used did not allow for a value that signifies: this variable has not been initialised yet.
This is not perfect reasoning: in reality, now that null-values are common, they simply form one more element of the set of valid values a variable can take. But practically, programmers have a way to distinguish between a variable being in sensible state, which may include the loop exit state, and it being in an uninitialised state.
I used them a fair bit when I was in school, but not so much since.
In theory they are useful when you want the loop body to execute once before the exit condition check. The problem is that for the few instances where I don't want the check first, typically I want the exit check in the middle of the loop body rather than at the very end. In that case, I prefer to use the well-known for (;;) with an if (condition) exit; somewhere in the body.
In fact, if I'm a bit shaky on the loop exit condition, sometimes I find it useful to start writing the loop as a for (;;) {} with an exit statement where needed, and then when I'm done I can see if it can be "cleaned up" by moving initilizations, exit conditions, and/or increment code inside the for's parentheses.
A situation where you always need to run a piece of code once, and depending on its result, possibly more times. The same can be produced with a regular while loop as well.
rc = get_something();
while (rc == wrong_stuff)
{
rc = get_something();
}
do
{
rc = get_something();
}
while (rc == wrong_stuff);
It's as simple as that:
precondition vs postcondition
while (cond) {...} - precondition, it executes the code only after checking.
do {...} while (cond) - postcondition, code is executed at least once.
Now that you know the secret .. use them wisely :)
do while is if you want to run the code block at least once. while on the other hand won't always run depending on the criteria specified.
I see that this question has been adequately answered, but would like to add this very specific use case scenario. You might start using do...while more frequently.
do
{
...
} while (0)
is often used for multi-line #defines. For example:
#define compute_values \
area = pi * r * r; \
volume = area * h
This works alright for:
r = 4;
h = 3;
compute_values;
-but- there is a gotcha for:
if (shape == circle) compute_values;
as this expands to:
if (shape == circle) area = pi *r * r;
volume = area * h;
If you wrap it in a do ... while(0) loop it properly expands to a single block:
if (shape == circle)
do
{
area = pi * r * r;
volume = area * h;
} while (0);
The answers so far summarize the general use for do-while. But the OP asked for an example, so here is one: Get user input. But the user's input may be invalid - so you ask for input, validate it, proceed if it's valid, otherwise repeat.
With do-while, you get the input while the input is not valid. With a regular while-loop, you get the input once, but if it's invalid, you get it again and again until it is valid. It's not hard to see that the former is shorter, more elegant, and simpler to maintain if the body of the loop grows more complex.
I've used it for a reader that reads the same structure multiple times.
using(IDataReader reader = connection.ExecuteReader())
{
do
{
while(reader.Read())
{
//Read record
}
} while(reader.NextResult());
}
I can't imagine how you've gone this long without using a do...while loop.
There's one on another monitor right now and there are multiple such loops in that program. They're all of the form:
do
{
GetProspectiveResult();
}
while (!ProspectIsGood());
I like to understand these two as:
while -> 'repeat until',
do ... while -> 'repeat if'.
I've used a do while when I'm reading a sentinel value at the beginning of a file, but other than that, I don't think it's abnormal that this structure isn't too commonly used--do-whiles are really situational.
-- file --
5
Joe
Bob
Jake
Sarah
Sue
-- code --
int MAX;
int count = 0;
do {
MAX = a.readLine();
k[count] = a.readLine();
count++;
} while(count <= MAX)
Here's my theory why most people (including me) prefer while(){} loops to do{}while(): A while(){} loop can easily be adapted to perform like a do..while() loop while the opposite is not true. A while loop is in a certain way "more general". Also programmers like easy to grasp patterns. A while loop says right at start what its invariant is and this is a nice thing.
Here's what I mean about the "more general" thing. Take this do..while loop:
do {
A;
if (condition) INV=false;
B;
} while(INV);
Transforming this in to a while loop is straightforward:
INV=true;
while(INV) {
A;
if (condition) INV=false;
B;
}
Now, we take a model while loop:
while(INV) {
A;
if (condition) INV=false;
B;
}
And transform this into a do..while loop, yields this monstrosity:
if (INV) {
do
{
A;
if (condition) INV=false;
B;
} while(INV)
}
Now we have two checks on opposite ends and if the invariant changes you have to update it on two places. In a certain way do..while is like the specialized screwdrivers in the tool box which you never use, because the standard screwdriver does everything you need.
I am programming about 12 years and only 3 months ago I have met a situation where it was really convenient to use do-while as one iteration was always necessary before checking a condition. So guess your big-time is ahead :).
It is a quite common structure in a server/consumer:
DOWHILE (no shutdown requested)
determine timeout
wait for work(timeout)
IF (there is work)
REPEAT
process
UNTIL(wait for work(0 timeout) indicates no work)
do what is supposed to be done at end of busy period.
ENDIF
ENDDO
the REPEAT UNTIL(cond) being a do {...} while(!cond)
Sometimes the wait for work(0) can be cheaper CPU wise (even eliminating the timeout calculation might be an improvement with very high arrival rates). Moreover, there are many queuing theory results that make the number served in a busy period an important statistic. (See for example Kleinrock - Vol 1.)
Similarly:
DOWHILE (no shutdown requested)
determine timeout
wait for work(timeout)
IF (there is work)
set throttle
REPEAT
process
UNTIL(--throttle<0 **OR** wait for work(0 timeout) indicates no work)
ENDIF
check for and do other (perhaps polled) work.
ENDDO
where check for and do other work may be exorbitantly expensive to put in the main loop or perhaps a kernel that does not support an efficient waitany(waitcontrol*,n) type operation or perhaps a situation where a prioritized queue might starve the other work and throttle is used as starvation control.
This type of balancing can seem like a hack, but it can be necessary. Blind use of thread pools would entirely defeat the performance benefits of the use of a caretaker thread with a private queue for a high updating rate complicated data structure as the use of a thread pool rather than a caretaker thread would require thread-safe implementation.
I really don't want to get into a debate about the pseudo code (for example, whether shutdown requested should be tested in the UNTIL) or caretaker threads versus thread pools - this is just meant to give a flavor of a particular use case of the control flow structure.
This is my personal opinion, but this question begs for an answer rooted in experience:
I have been programming in C for 38 years, and I never use do / while loops in regular code.
The only compelling use for this construct is in macros where it can wrap multiple statements into a single statement via a do { multiple statements } while (0)
I have seen countless examples of do / while loops with bogus error detection or redundant function calls.
My explanation for this observation is programmers tend to model problems incorrectly when they think in terms of do / while loops. They either miss an important ending condition or they miss the possible failure of the initial condition which they move to the end.
For these reasons, I have come to believe that where there is a do / while loop, there is a bug, and I regularly challenge newbie programmers to show me a do / while loop where I cannot spot a bug nearby.
This type of loop can be easily avoided: use a for (;;) { ... } and add the necessary termination tests where they are appropriate. It is quite common that there need be more than one such test.
Here is a classic example:
/* skip the line */
do {
c = getc(fp);
} while (c != '\n');
This will fail if the file does not end with a newline. A trivial example of such a file is the empty file.
A better version is this:
int c; // another classic bug is to define c as char.
while ((c = getc(fp)) != EOF && c != '\n')
continue;
Alternately, this version also hides the c variable:
for (;;) {
int c = getc(fp);
if (c == EOF || c == '\n')
break;
}
Try searching for while (c != '\n'); in any search engine, and you will find bugs such as this one (retrieved June 24, 2017):
In ftp://ftp.dante.de/tex-archive/biblio/tib/src/streams.c , function getword(stream,p,ignore), has a do / while and sure enough at least 2 bugs:
c is defined as a char and
there is a potential infinite loop while (c!='\n') c=getc(stream);
Conclusion: avoid do / while loops and look for bugs when you see one.
while loops check the condition before the loop, do...while loops check the condition after the loop. This is useful is you want to base the condition on side effects from the loop running or, like other posters said, if you want the loop to run at least once.
I understand where you're coming from, but the do-while is something that most use rarely, and I've never used myself. You're not doing it wrong.
You're not doing it wrong. That's like saying someone is doing it wrong because they've never used the byte primitive. It's just not that commonly used.
The most common scenario I run into where I use a do/while loop is in a little console program that runs based on some input and will repeat as many times as the user likes. Obviously it makes no sense for a console program to run no times; but beyond the first time it's up to the user -- hence do/while instead of just while.
This allows the user to try out a bunch of different inputs if desired.
do
{
int input = GetInt("Enter any integer");
// Do something with input.
}
while (GetBool("Go again?"));
I suspect that software developers use do/while less and less these days, now that practically every program under the sun has a GUI of some sort. It makes more sense with console apps, as there is a need to continually refresh the output to provide instructions or prompt the user with new information. With a GUI, in contrast, the text providing that information to the user can just sit on a form and never need to be repeated programmatically.
I use do-while loops all the time when reading in files. I work with a lot of text files that include comments in the header:
# some comments
# some more comments
column1 column2
1.234 5.678
9.012 3.456
... ...
i'll use a do-while loop to read up to the "column1 column2" line so that I can look for the column of interest. Here's the pseudocode:
do {
line = read_line();
} while ( line[0] == '#');
/* parse line */
Then I'll do a while loop to read through the rest of the file.
Being a geezer programmer, many of my school programming projects used text menu driven interactions. Virtually all used something like the following logic for the main procedure:
do
display options
get choice
perform action appropriate to choice
while choice is something other than exit
Since school days, I have found that I use the while loop more frequently.
One of the applications I have seen it is in Oracle when we look at result sets.
Once you a have a result set, you first fetch from it (do) and from that point on.. check if the fetch returns an element or not (while element found..) .. The same might be applicable for any other "fetch-like" implementations.
I 've used it in a function that returned the next character position in an utf-8 string:
char *next_utf8_character(const char *txt)
{
if (!txt || *txt == '\0')
return txt;
do {
txt++;
} while (((signed char) *txt) < 0 && (((unsigned char) *txt) & 0xc0) == 0xc0)
return (char *)txt;
}
Note that, this function is written from mind and not tested. The point is that you have to do the first step anyway and you have to do it before you can evaluate the condition.
Any sort of console input works well with do-while because you prompt the first time, and re-prompt whenever the input validation fails.
Even though there are plenty of answers here is my take. It all comes down to optimalization. I'll show two examples where one is faster then the other.
Case 1: while
string fileName = string.Empty, fullPath = string.Empty;
while (string.IsNullOrEmpty(fileName) || File.Exists(fullPath))
{
fileName = Guid.NewGuid().ToString() + fileExtension;
fullPath = Path.Combine(uploadDirectory, fileName);
}
Case 2: do while
string fileName = string.Empty, fullPath = string.Empty;
do
{
fileName = Guid.NewGuid().ToString() + fileExtension;
fullPath = Path.Combine(uploadDirectory, fileName);
}
while (File.Exists(fullPath));
So there two will do the exact same things. But there is one fundamental difference and that is that the while requires an extra statement to enter the while. Which is ugly because let's say every possible scenario of the Guid class has already been taken except for one variant. This means I'll have to loop around 5,316,911,983,139,663,491,615,228,241,121,400,000 times.
Every time I get to the end of my while statement I will need to do the string.IsNullOrEmpty(fileName) check. So this would take up a little bit, a tiny fraction of CPU work. But do this very small task times the possible combinations the Guid class has and we are talking about hours, days, months or extra time?
Of course this is an extreme example because you probably wouldn't see this in production. But if we would think about the YouTube algorithm, it is very well possible that they would encounter the generation of an ID where some ID's have already been taken. So it comes down to big projects and optimalization.
Even in educational references you barely would find a do...while example. Only recently, after reading Ethan Brown beautiful book, Learning JavaScript I encountered one do...while well defined example. That's been said, I believe it is OK if you don't find application for this structure in you routine job.
It's true that do/while loops are pretty rare. I think this is because a great many loops are of the form
while(something needs doing)
do it;
In general, this is an excellent pattern, and it has the usually-desirable property that if nothing needs doing, the loop runs zero times.
But once in a while, there's some fine reason why you definitely want to make at least one trip through the loop, no matter what. My favorite example is: converting an integer to its decimal representation as a string, that is, implementing printf("%d"), or the semistandard itoa() function.
To illustrate, here is a reasonably straightforward implementation of itoa(). It's not quite the "traditional" formulation; I'll explain it in more detail below if anyone's curious. But the key point is that it embodies the canonical algorithm, repeatedly dividing by 10 to pick off digits from the right, and it's written using an ordinary while loop... and this means it has a bug.
#include <stddef.h>
char *itoa(unsigned int n, char buf[], int bufsize)
{
if(bufsize < 2) return NULL;
char *p = &buf[bufsize];
*--p = '\0';
while(n > 0) {
if(p == buf) return NULL;
*--p = n % 10 + '0';
n /= 10;
}
return p;
}
If you didn't spot it, the bug is that this code returns nothing — an empty string — if you ask it to convert the integer 0. So this is an example of a case where, when there's "nothing" to do, we don't want the code to do nothing — we always want it to produce at least one digit. So we always want it to make at least one trip through the loop. So a do/while loop is just the ticket:
do {
if(p == buf) return NULL;
*--p = n % 10 + '0';
n /= 10;
} while(n > 0);
So now we have a loop that usually stops when n reaches 0, but if n is initially 0 — if you pass in a 0 — it returns the string "0", as desired.
As promised, here's a bit more information about the itoa function in this example. You pass it arguments which are: an int to convert (actually, an unsigned int, so that we don't have to worry about negative numbers); a buffer to render into; and the size of that buffer. It returns a char * pointing into your buffer, pointing at the beginning of the rendered string. (Or it returns NULL if it discovers that the buffer you gave it wasn't big enough.) The "nontraditional" aspect of this implementation is that it fills in the array from right to left, meaning that it doesn't have to reverse the string at the end — and also meaning that the pointer it returns to you is usually not to the beginning of the buffer. So you have to use the pointer it returns to you as the string to use; you can't call it and then assume that the buffer you handed it is the string you can use.
Finally, for completeness, here is a little test program to test this version of itoa with.
#include <stdio.h>
#include <stdlib.h>
int main(int argc, char *argv[])
{
int n;
if(argc > 1)
n = atoi(argv[1]);
else {
printf("enter a number: "); fflush(stdout);
if(scanf("%d", &n) != 1) return EXIT_FAILURE;
}
if(n < 0) {
fprintf(stderr, "sorry, can't do negative numbers yet\n");
return EXIT_FAILURE;
}
char buf[20];
printf("converted: %s\n", itoa(n, buf, sizeof(buf)));
return EXIT_SUCCESS;
}
I ran across this while researching the proper loop to use for a situation I have. I believe this will fully satisfy a common situation where a do.. while loop is a better implementation than a while loop (C# language, since you stated that is your primary for work).
I am generating a list of strings based on the results of an SQL query. The returned object by my query is an SQLDataReader. This object has a function called Read() which advances the object to the next row of data, and returns true if there was another row. It will return false if there is not another row.
Using this information, I want to return each row to a list, then stop when there is no more data to return. A Do... While loop works best in this situation as it ensures that adding an item to the list will happen BEFORE checking if there is another row. The reason this must be done BEFORE checking the while(condition) is that when it checks, it also advances. Using a while loop in this situation would cause it to bypass the first row due to the nature of that particular function.
In short:
This won't work in my situation.
//This will skip the first row because Read() returns true after advancing.
while (_read.NextResult())
{
list.Add(_read.GetValue(0).ToString());
}
return list;
This will.
//This will make sure the currently read row is added before advancing.
do
{
list.Add(_read.GetValue(0).ToString());
}
while (_read.NextResult());
return list;