Related
When I ran ReSharper on my code, for example:
if (some condition)
{
Some code...
}
ReSharper gave me the above warning (Invert "if" statement to reduce nesting), and suggested the following correction:
if (!some condition) return;
Some code...
I would like to understand why that's better. I always thought that using "return" in the middle of a method problematic, somewhat like "goto".
It is not only aesthetic, but it also reduces the maximum nesting level inside the method. This is generally regarded as a plus because it makes methods easier to understand (and indeed, many static analysis tools provide a measure of this as one of the indicators of code quality).
On the other hand, it also makes your method have multiple exit points, something that another group of people believes is a no-no.
Personally, I agree with ReSharper and the first group (in a language that has exceptions I find it silly to discuss "multiple exit points"; almost anything can throw, so there are numerous potential exit points in all methods).
Regarding performance: both versions should be equivalent (if not at the IL level, then certainly after the jitter is through with the code) in every language. Theoretically this depends on the compiler, but practically any widely used compiler of today is capable of handling much more advanced cases of code optimization than this.
A return in the middle of the method is not necessarily bad. It might be better to return immediately if it makes the intent of the code clearer. For example:
double getPayAmount() {
double result;
if (_isDead) result = deadAmount();
else {
if (_isSeparated) result = separatedAmount();
else {
if (_isRetired) result = retiredAmount();
else result = normalPayAmount();
};
}
return result;
};
In this case, if _isDead is true, we can immediately get out of the method. It might be better to structure it this way instead:
double getPayAmount() {
if (_isDead) return deadAmount();
if (_isSeparated) return separatedAmount();
if (_isRetired) return retiredAmount();
return normalPayAmount();
};
I've picked this code from the refactoring catalog. This specific refactoring is called: Replace Nested Conditional with Guard Clauses.
This is a bit of a religious argument, but I agree with ReSharper that you should prefer less nesting. I believe that this outweighs the negatives of having multiple return paths from a function.
The key reason for having less nesting is to improve code readability and maintainability. Remember that many other developers will need to read your code in the future, and code with less indentation is generally much easier to read.
Preconditions are a great example of where it is okay to return early at the start of the function. Why should the readability of the rest of the function be affected by the presence of a precondition check?
As for the negatives about returning multiple times from a method - debuggers are pretty powerful now, and it's very easy to find out exactly where and when a particular function is returning.
Having multiple returns in a function is not going to affect the maintainance programmer's job.
Poor code readability will.
As others have mentioned, there shouldn't be a performance hit, but there are other considerations. Aside from those valid concerns, this also can open you up to gotchas in some circumstances. Suppose you were dealing with a double instead:
public void myfunction(double exampleParam){
if(exampleParam > 0){
//Body will *not* be executed if Double.IsNan(exampleParam)
}
}
Contrast that with the seemingly equivalent inversion:
public void myfunction(double exampleParam){
if(exampleParam <= 0)
return;
//Body *will* be executed if Double.IsNan(exampleParam)
}
So in certain circumstances what appears to be a a correctly inverted if might not be.
The idea of only returning at the end of a function came back from the days before languages had support for exceptions. It enabled programs to rely on being able to put clean-up code at the end of a method, and then being sure it would be called and some other programmer wouldn't hide a return in the method that caused the cleanup code to be skipped. Skipped cleanup code could result in a memory or resource leak.
However, in a language that supports exceptions, it provides no such guarantees. In a language that supports exceptions, the execution of any statement or expression can cause a control flow that causes the method to end. This means clean-up must be done through using the finally or using keywords.
Anyway, I'm saying I think a lot of people quote the 'only return at the end of a method' guideline without understanding why it was ever a good thing to do, and that reducing nesting to improve readability is probably a better aim.
I'd like to add that there is name for those inverted if's - Guard Clause. I use it whenever I can.
I hate reading code where there is if at the beginning, two screens of code and no else. Just invert if and return. That way nobody will waste time scrolling.
http://c2.com/cgi/wiki?GuardClause
It doesn't only affect aesthetics, but it also prevents code nesting.
It can actually function as a precondition to ensure that your data is valid as well.
This is of course subjective, but I think it strongly improves on two points:
It is now immediately obvious that your function has nothing left to do if condition holds.
It keeps the nesting level down. Nesting hurts readability more than you'd think.
Multiple return points were a problem in C (and to a lesser extent C++) because they forced you to duplicate clean-up code before each of the return points. With garbage collection, the try | finally construct and using blocks, there's really no reason why you should be afraid of them.
Ultimately it comes down to what you and your colleagues find easier to read.
Guard clauses or pre-conditions (as you can probably see) check to see if a certain condition is met and then breaks the flow of the program. They're great for places where you're really only interested in one outcome of an if statement. So rather than say:
if (something) {
// a lot of indented code
}
You reverse the condition and break if that reversed condition is fulfilled
if (!something) return false; // or another value to show your other code the function did not execute
// all the code from before, save a lot of tabs
return is nowhere near as dirty as goto. It allows you to pass a value to show the rest of your code that the function couldn't run.
You'll see the best examples of where this can be applied in nested conditions:
if (something) {
do-something();
if (something-else) {
do-another-thing();
} else {
do-something-else();
}
}
vs:
if (!something) return;
do-something();
if (!something-else) return do-something-else();
do-another-thing();
You'll find few people arguing the first is cleaner but of course, it's completely subjective. Some programmers like to know what conditions something is operating under by indentation, while I'd much rather keep method flow linear.
I won't suggest for one moment that precons will change your life or get you laid but you might find your code just that little bit easier to read.
Performance-wise, there will be no noticeable difference between the two approaches.
But coding is about more than performance. Clarity and maintainability are also very important. And, in cases like this where it doesn't affect performance, it is the only thing that matters.
There are competing schools of thought as to which approach is preferable.
One view is the one others have mentioned: the second approach reduces the nesting level, which improves code clarity. This is natural in an imperative style: when you have nothing left to do, you might as well return early.
Another view, from the perspective of a more functional style, is that a method should have only one exit point. Everything in a functional language is an expression. So if statements must always have an else clauses. Otherwise the if expression wouldn't always have a value. So in the functional style, the first approach is more natural.
There are several good points made here, but multiple return points can be unreadable as well, if the method is very lengthy. That being said, if you're going to use multiple return points just make sure that your method is short, otherwise the readability bonus of multiple return points may be lost.
Performance is in two parts. You have performance when the software is in production, but you also want to have performance while developing and debugging. The last thing a developer wants is to "wait" for something trivial. In the end, compiling this with optimization enabled will result in similar code. So it's good to know these little tricks that pay off in both scenarios.
The case in the question is clear, ReSharper is correct. Rather than nesting if statements, and creating new scope in code, you're setting a clear rule at the start of your method. It increases readability, it will be easier to maintain, and it reduces the amount of rules one has to sift through to find where they want to go.
Personally I prefer only 1 exit point. It's easy to accomplish if you keep your methods short and to the point, and it provides a predictable pattern for the next person who works on your code.
eg.
bool PerformDefaultOperation()
{
bool succeeded = false;
DataStructure defaultParameters;
if ((defaultParameters = this.GetApplicationDefaults()) != null)
{
succeeded = this.DoSomething(defaultParameters);
}
return succeeded;
}
This is also very useful if you just want to check the values of certain local variables within a function before it exits. All you need to do is place a breakpoint on the final return and you are guaranteed to hit it (unless an exception is thrown).
Avoiding multiple exit points can lead to performance gains. I am not sure about C# but in C++ the Named Return Value Optimization (Copy Elision, ISO C++ '03 12.8/15) depends on having a single exit point. This optimization avoids copy constructing your return value (in your specific example it doesn't matter). This could lead to considerable gains in performance in tight loops, as you are saving a constructor and a destructor each time the function is invoked.
But for 99% of the cases saving the additional constructor and destructor calls is not worth the loss of readability nested if blocks introduce (as others have pointed out).
Many good reasons about how the code looks like. But what about results?
Let's take a look to some C# code and its IL compiled form:
using System;
public class Test {
public static void Main(string[] args) {
if (args.Length == 0) return;
if ((args.Length+2)/3 == 5) return;
Console.WriteLine("hey!!!");
}
}
This simple snippet can be compiled. You can open the generated .exe file with ildasm and check what is the result. I won't post all the assembler thing but I'll describe the results.
The generated IL code does the following:
If the first condition is false, jumps to the code where the second is.
If it's true jumps to the last instruction. (Note: the last instruction is a return).
In the second condition the same happens after the result is calculated. Compare and: got to the Console.WriteLine if false or to the end if this is true.
Print the message and return.
So it seems that the code will jump to the end. What if we do a normal if with nested code?
using System;
public class Test {
public static void Main(string[] args) {
if (args.Length != 0 && (args.Length+2)/3 != 5)
{
Console.WriteLine("hey!!!");
}
}
}
The results are quite similar in IL instructions. The difference is that before there were two jumps per condition: if false go to next piece of code, if true go to the end. And now the IL code flows better and has 3 jumps (the compiler optimized this a bit):
First jump: when Length is 0 to a part where the code jumps again (Third jump) to the end.
Second: in the middle of the second condition to avoid one instruction.
Third: if the second condition is false, jump to the end.
Anyway, the program counter will always jump.
In theory, inverting if could lead to better performance if it increases branch prediction hit rate. In practice, I think it is very hard to know exactly how branch prediction will behave, especially after compiling, so I would not do it in my day-to-day development, except if I am writing assembly code.
More on branch prediction here.
That is simply controversial. There is no "agreement among programmers" on the question of early return. It's always subjective, as far as I know.
It's possible to make a performance argument, since it's better to have conditions that are written so they are most often true; it can also be argued that it is clearer. It does, on the other hand, create nested tests.
I don't think you will get a conclusive answer to this question.
There are a lot of insightful answers there already, but still, I would to direct to a slightly different situation: Instead of precondition, that should be put on top of a function indeed, think of a step-by-step initialization, where you have to check for each step to succeed and then continue with the next. In this case, you cannot check everything at the top.
I found my code really unreadable when writing an ASIO host application with Steinberg's ASIOSDK, as I followed the nesting paradigm. It went like eight levels deep, and I cannot see a design flaw there, as mentioned by Andrew Bullock above. Of course, I could have packed some inner code to another function, and then nested the remaining levels there to make it more readable, but this seems rather random to me.
By replacing nesting with guard clauses, I even discovered a misconception of mine regarding a portion of cleanup-code that should have occurred much earlier within the function instead of at the end. With nested branches, I would never have seen that, you could even say they led to my misconception.
So this might be another situation where inverted ifs can contribute to a clearer code.
It's a matter of opinion.
My normal approach would be to avoid single line ifs, and returns in the middle of a method.
You wouldn't want lines like it suggests everywhere in your method but there is something to be said for checking a bunch of assumptions at the top of your method, and only doing your actual work if they all pass.
In my opinion early return is fine if you are just returning void (or some useless return code you're never gonna check) and it might improve readability because you avoid nesting and at the same time you make explicit that your function is done.
If you are actually returning a returnValue - nesting is usually a better way to go cause you return your returnValue just in one place (at the end - duh), and it might make your code more maintainable in a whole lot of cases.
I'm not sure, but I think, that R# tries to avoid far jumps. When You have IF-ELSE, compiler does something like this:
Condition false -> far jump to false_condition_label
true_condition_label:
instruction1
...
instruction_n
false_condition_label:
instruction1
...
instruction_n
end block
If condition is true there is no jump and no rollout L1 cache, but jump to false_condition_label can be very far and processor must rollout his own cache. Synchronising cache is expensive. R# tries replace far jumps into short jumps and in this case there is bigger probability, that all instructions are already in cache.
I think it depends on what you prefer, as mentioned, theres no general agreement afaik.
To reduce annoyment, you may reduce this kind of warning to "Hint"
My idea is that the return "in the middle of a function" shouldn't be so "subjective".
The reason is quite simple, take this code:
function do_something( data ){
if (!is_valid_data( data ))
return false;
do_something_that_take_an_hour( data );
istance = new object_with_very_painful_constructor( data );
if ( istance is not valid ) {
error_message( );
return ;
}
connect_to_database ( );
get_some_other_data( );
return;
}
Maybe the first "return" it's not SO intuitive, but that's really saving.
There are too many "ideas" about clean codes, that simply need more practise to lose their "subjective" bad ideas.
There are several advantages to this sort of coding but for me the big win is, if you can return quick you can improve the speed of your application. IE I know that because of Precondition X that I can return quickly with an error. This gets rid of the error cases first and reduces the complexity of your code. In a lot of cases because the cpu pipeline can be now be cleaner it can stop pipeline crashes or switches. Secondly if you are in a loop, breaking or returning out quickly can save you a lots of cpu. Some programmers use loop invariants to do this sort of quick exit but in this you can broke your cpu pipeline and even create memory seek problem and mean the the cpu needs to load from outside cache. But basically I think you should do what you intended, that is end the loop or function not create a complex code path just to implement some abstract notion of correct code. If the only tool you have is a hammer then everything looks like a nail.
I'm thinking of replacing a lot of inline foreaches with Linq and in so doing will make new methods, e.g.
Current:
foreach(Item in List)
{
Statement1
Statement2
Statement3
}
Idea:
List.Foreach(Item => Method(Item))
Obviously Method() contains Statement1..3
Is this good practise or is calling a method thousands of times going to degrade performance? My Lists have 10,000-100,000 elements.
Well, for one thing you can probably make the ForEach statement more efficient using a method group conversion
List.ForEach(Method);
That's removed one level of indirection.
Personally though, I don't think it's a good idea. The first approach is more readable, and likely to perform about as well. What's the advantage of using List<T>.ForEach here?
Eric Lippert talks about this more in an excellent blog post. I would use List<T>.ForEach if you already had a delegate you wanted to execute against each element, but I wouldn't introduce a delegate and an extra method just for the sake of it.
In terms of efficiency, I wouldn't expect to see much difference. The first form may perform a little better as it doesn't have the indirection of the delegate call - but the second form may be more efficient if the iteration loop within ForEach makes use of the fact that it has access to the internal data structures of the List<T>. I very much doubt you'll notice it either way. You could try to measure it if you're really bothered, of course.
If your motivation for considering the change is that the three statements in the body are too complicated, then I'd probably use ordinary foreach, but refactor the body to a method:
foreach(var item in List)
Method(item);
If the code in the body isn't complicated, then I'd agree with Jon that there is no good reason for using ForEach (it doesn't make the code more readable/declarative in any way).
I generally don't like using "LINQ-like" constructs to do imperative processing at the end of a LINQ query. I think that using foreach more clearly states that you're finished with querying data and you're doing some processing now.
I'm totally agree with Jon Skeet's answer. But since we are talking about ForEach performance, I have something addtional to your question. Be aware of that if your Statement 1~3 is not relative with each other, that is:
foreach(Item in List)
{
DoSomething();
DoAnotherThing();
DoTheLastThing();
}
The code above probably has a worse performance than the following:
foreach(Item in List)
{
DoSomething();
}
foreach(Item in List)
{
DoAnotherThing();
}
foreach(Item in List)
{
DoTheLastThing();
}
The reason that the latter code which needs 2 more go-over-loops has a better performance, is because when it keeps calling DoSomething() thousands of times, some necessary variables are always warm in CPU registers. Very low costs are used to access those variables. On the other hand, if it calls DoAnotherThing() immediately after calling DoSomthing(), those variables of DoSomething() which already in CPU registers will cool down. Much more costs are needed to access these variables in the next loop.
I've always thought that you should write your code for readability first because the compiler and CLR do an exceptional job at optimisation. If you find that through benchmarking, that this code could be executed more quickly, then have a look at other options by all means.
E.g. for loops are quicker than foreach(), as they use array offsets which are internally optimised in the CLR.
But doesn't a List.ForEach () surely does a foreach ( ) anyway, so you are just giving the work to another method, rather than doing it yourself.
Strictly speaking, introducing more method calls will actually slow your code down on the first pass, because the CLR will JIT-compile methods as they are called, although subsequent calls to the method will not.
So my advice would be stick to writing readable code, then go from there if you can prove that this is a bottleneck of the system.
So I've been using LINQ for a while, and I have a question.
I have a collection of objects. They fall into two categories based on their property values. I need to set a different property one way for one group, and one way for the other:
foreach(MyItem currentItem in myItemCollection)
{
if (currentItem.myProp == "CATEGORY_ONE")
{
currentItem.value = 1;
}
else if (currentItem.myProp == "CATEGORY_TWO")
{
currentItem.value = 2;
}
}
Alternately, I could do something like:
myItemCollection.Where(currentItem=>currentItem.myProp == "CATEGORY_ONE").ForEach(item=>item.value = 1);
myItemCollection.Where(currentItem=>currentItem.myProp == "CATEGORY_TWO").ForEach(item=>item.value = 2);
I would think the first one is faster, but figured it couldn't hurt to check.
Iterating through the collection only once (and not calling any delegates, and not using as many iterators) is likely to be slightly faster, but I very much doubt that it'll be significant.
Write the most readable code which does the job, and only worry about performance at the micro level (i.e. where it's easy to change) when it's a problem.
I think the first piece of code is more readable in this case. Less LINQy, but more readable.
How about doing it like that?
myItemCollection.ForEach(item => item.value = item.myProp == "CATEGORY_ONE" ? 1 : 2);
Real Answer
Only a profiler will really tell you which one is faster.
Fuzzy Answer
The first one is most likely faster in terms of raw speed. There are two reasons why
The list is only iterated a single time
The second one erquires 2 delegate invocations for every element in the list.
The real question though is "does the speed difference between the two solutions matter?" That is the only question that is relevant to your application. And only profiling can really give you much data on this.
I'm working with a code base where lists need to be frequently searched for a single element.
Is it faster to use a Predicate and Find() than to manually do an enumeration on the List?
for example:
string needle = "example";
FooObj result = _list.Find(delegate(FooObj foo) {
return foo.Name == needle;
});
vs.
string needle = "example";
foreach (FooObj foo in _list)
{
if (foo.Name == needle)
return foo;
}
While they are equivalent in functionality, are they equivalent in performance as well?
They are not equivalent in performance. The Find() method requires a method (in this case delegate) invocation for every item in the list. Method invocation is not free and is relatively expensive as compared to an inline comparison. The foreach version requires no extra method invocation per object.
That being said, I wouldn't pick one or the other based on performance until I actually profiled my code and found this to be a problem. I haven't yet found the overhead of this scenario to every be a "hot path" problem for code I've written and I use this pattern a lot with Find and other similar methods.
If searching your list is too slow as-is, you can probably do better than a linear search. If you can keep the list sorted, you can use a binary search to find the element in O(lg n) time.
If you're searching a whole lot, consider replacing that list with a Dictionary to index your objects by name.
Technically, the runtime performance of the delegate version will be slightly worse than the other version - but in most cases you'd be hard pressed to perceive any difference.
Of more importance (IHMO) is the code time performance of being able to write what you want, rather than how you want it. This makes a big difference in maintainability.
This original code:
string needle = "example";
foreach (FooObj foo in _list)
{
if (foo.Name == needle)
return foo;
}
requires any maintainer to read the code and understand that you're looking for a particular item.
This code
string needle = "example";
return _list.Find(
delegate(FooObj foo)
{
return foo.Name == needle;
});
makes it clear that you're looking for a particular item - quicker to understand.
Finally, this code, using features from C# 3.0:
string needle = "example";
return _list.Find( foo => foo.Name == needle);
does exactly the same thing, but in one line that's even faster to read and understand (well, once you understand lambda expressions, anyway).
In summary, given that the performance of the alternatives is nearly equal, choose the one that makes the code easier to read and maintain.
"I'm working with a code base where lists need to be frequently searched for a single element"
It is better to change your data structure to be Dictionary instead of List to get better performance
Similar question was asked for List.ForEach vs. foreach-iteration (foreach vs someList.Foreach(){}).
In that case List.ForEach was a bit faster.
As Jared pointed out, there are differences.
But, as always, don't worry unless you know it's a bottleneck. And if it is a bottleneck, that's probably because the lists are big, in which case you should consider using a faster find - a hash table or binary tree, or even just sorting the list and doing binary search will give you log(n) performance which will have far more impact than tweaking your linear case.
When I ran ReSharper on my code, for example:
if (some condition)
{
Some code...
}
ReSharper gave me the above warning (Invert "if" statement to reduce nesting), and suggested the following correction:
if (!some condition) return;
Some code...
I would like to understand why that's better. I always thought that using "return" in the middle of a method problematic, somewhat like "goto".
It is not only aesthetic, but it also reduces the maximum nesting level inside the method. This is generally regarded as a plus because it makes methods easier to understand (and indeed, many static analysis tools provide a measure of this as one of the indicators of code quality).
On the other hand, it also makes your method have multiple exit points, something that another group of people believes is a no-no.
Personally, I agree with ReSharper and the first group (in a language that has exceptions I find it silly to discuss "multiple exit points"; almost anything can throw, so there are numerous potential exit points in all methods).
Regarding performance: both versions should be equivalent (if not at the IL level, then certainly after the jitter is through with the code) in every language. Theoretically this depends on the compiler, but practically any widely used compiler of today is capable of handling much more advanced cases of code optimization than this.
A return in the middle of the method is not necessarily bad. It might be better to return immediately if it makes the intent of the code clearer. For example:
double getPayAmount() {
double result;
if (_isDead) result = deadAmount();
else {
if (_isSeparated) result = separatedAmount();
else {
if (_isRetired) result = retiredAmount();
else result = normalPayAmount();
};
}
return result;
};
In this case, if _isDead is true, we can immediately get out of the method. It might be better to structure it this way instead:
double getPayAmount() {
if (_isDead) return deadAmount();
if (_isSeparated) return separatedAmount();
if (_isRetired) return retiredAmount();
return normalPayAmount();
};
I've picked this code from the refactoring catalog. This specific refactoring is called: Replace Nested Conditional with Guard Clauses.
This is a bit of a religious argument, but I agree with ReSharper that you should prefer less nesting. I believe that this outweighs the negatives of having multiple return paths from a function.
The key reason for having less nesting is to improve code readability and maintainability. Remember that many other developers will need to read your code in the future, and code with less indentation is generally much easier to read.
Preconditions are a great example of where it is okay to return early at the start of the function. Why should the readability of the rest of the function be affected by the presence of a precondition check?
As for the negatives about returning multiple times from a method - debuggers are pretty powerful now, and it's very easy to find out exactly where and when a particular function is returning.
Having multiple returns in a function is not going to affect the maintainance programmer's job.
Poor code readability will.
As others have mentioned, there shouldn't be a performance hit, but there are other considerations. Aside from those valid concerns, this also can open you up to gotchas in some circumstances. Suppose you were dealing with a double instead:
public void myfunction(double exampleParam){
if(exampleParam > 0){
//Body will *not* be executed if Double.IsNan(exampleParam)
}
}
Contrast that with the seemingly equivalent inversion:
public void myfunction(double exampleParam){
if(exampleParam <= 0)
return;
//Body *will* be executed if Double.IsNan(exampleParam)
}
So in certain circumstances what appears to be a a correctly inverted if might not be.
The idea of only returning at the end of a function came back from the days before languages had support for exceptions. It enabled programs to rely on being able to put clean-up code at the end of a method, and then being sure it would be called and some other programmer wouldn't hide a return in the method that caused the cleanup code to be skipped. Skipped cleanup code could result in a memory or resource leak.
However, in a language that supports exceptions, it provides no such guarantees. In a language that supports exceptions, the execution of any statement or expression can cause a control flow that causes the method to end. This means clean-up must be done through using the finally or using keywords.
Anyway, I'm saying I think a lot of people quote the 'only return at the end of a method' guideline without understanding why it was ever a good thing to do, and that reducing nesting to improve readability is probably a better aim.
I'd like to add that there is name for those inverted if's - Guard Clause. I use it whenever I can.
I hate reading code where there is if at the beginning, two screens of code and no else. Just invert if and return. That way nobody will waste time scrolling.
http://c2.com/cgi/wiki?GuardClause
It doesn't only affect aesthetics, but it also prevents code nesting.
It can actually function as a precondition to ensure that your data is valid as well.
This is of course subjective, but I think it strongly improves on two points:
It is now immediately obvious that your function has nothing left to do if condition holds.
It keeps the nesting level down. Nesting hurts readability more than you'd think.
Multiple return points were a problem in C (and to a lesser extent C++) because they forced you to duplicate clean-up code before each of the return points. With garbage collection, the try | finally construct and using blocks, there's really no reason why you should be afraid of them.
Ultimately it comes down to what you and your colleagues find easier to read.
Guard clauses or pre-conditions (as you can probably see) check to see if a certain condition is met and then breaks the flow of the program. They're great for places where you're really only interested in one outcome of an if statement. So rather than say:
if (something) {
// a lot of indented code
}
You reverse the condition and break if that reversed condition is fulfilled
if (!something) return false; // or another value to show your other code the function did not execute
// all the code from before, save a lot of tabs
return is nowhere near as dirty as goto. It allows you to pass a value to show the rest of your code that the function couldn't run.
You'll see the best examples of where this can be applied in nested conditions:
if (something) {
do-something();
if (something-else) {
do-another-thing();
} else {
do-something-else();
}
}
vs:
if (!something) return;
do-something();
if (!something-else) return do-something-else();
do-another-thing();
You'll find few people arguing the first is cleaner but of course, it's completely subjective. Some programmers like to know what conditions something is operating under by indentation, while I'd much rather keep method flow linear.
I won't suggest for one moment that precons will change your life or get you laid but you might find your code just that little bit easier to read.
Performance-wise, there will be no noticeable difference between the two approaches.
But coding is about more than performance. Clarity and maintainability are also very important. And, in cases like this where it doesn't affect performance, it is the only thing that matters.
There are competing schools of thought as to which approach is preferable.
One view is the one others have mentioned: the second approach reduces the nesting level, which improves code clarity. This is natural in an imperative style: when you have nothing left to do, you might as well return early.
Another view, from the perspective of a more functional style, is that a method should have only one exit point. Everything in a functional language is an expression. So if statements must always have an else clauses. Otherwise the if expression wouldn't always have a value. So in the functional style, the first approach is more natural.
There are several good points made here, but multiple return points can be unreadable as well, if the method is very lengthy. That being said, if you're going to use multiple return points just make sure that your method is short, otherwise the readability bonus of multiple return points may be lost.
Performance is in two parts. You have performance when the software is in production, but you also want to have performance while developing and debugging. The last thing a developer wants is to "wait" for something trivial. In the end, compiling this with optimization enabled will result in similar code. So it's good to know these little tricks that pay off in both scenarios.
The case in the question is clear, ReSharper is correct. Rather than nesting if statements, and creating new scope in code, you're setting a clear rule at the start of your method. It increases readability, it will be easier to maintain, and it reduces the amount of rules one has to sift through to find where they want to go.
Personally I prefer only 1 exit point. It's easy to accomplish if you keep your methods short and to the point, and it provides a predictable pattern for the next person who works on your code.
eg.
bool PerformDefaultOperation()
{
bool succeeded = false;
DataStructure defaultParameters;
if ((defaultParameters = this.GetApplicationDefaults()) != null)
{
succeeded = this.DoSomething(defaultParameters);
}
return succeeded;
}
This is also very useful if you just want to check the values of certain local variables within a function before it exits. All you need to do is place a breakpoint on the final return and you are guaranteed to hit it (unless an exception is thrown).
Avoiding multiple exit points can lead to performance gains. I am not sure about C# but in C++ the Named Return Value Optimization (Copy Elision, ISO C++ '03 12.8/15) depends on having a single exit point. This optimization avoids copy constructing your return value (in your specific example it doesn't matter). This could lead to considerable gains in performance in tight loops, as you are saving a constructor and a destructor each time the function is invoked.
But for 99% of the cases saving the additional constructor and destructor calls is not worth the loss of readability nested if blocks introduce (as others have pointed out).
Many good reasons about how the code looks like. But what about results?
Let's take a look to some C# code and its IL compiled form:
using System;
public class Test {
public static void Main(string[] args) {
if (args.Length == 0) return;
if ((args.Length+2)/3 == 5) return;
Console.WriteLine("hey!!!");
}
}
This simple snippet can be compiled. You can open the generated .exe file with ildasm and check what is the result. I won't post all the assembler thing but I'll describe the results.
The generated IL code does the following:
If the first condition is false, jumps to the code where the second is.
If it's true jumps to the last instruction. (Note: the last instruction is a return).
In the second condition the same happens after the result is calculated. Compare and: got to the Console.WriteLine if false or to the end if this is true.
Print the message and return.
So it seems that the code will jump to the end. What if we do a normal if with nested code?
using System;
public class Test {
public static void Main(string[] args) {
if (args.Length != 0 && (args.Length+2)/3 != 5)
{
Console.WriteLine("hey!!!");
}
}
}
The results are quite similar in IL instructions. The difference is that before there were two jumps per condition: if false go to next piece of code, if true go to the end. And now the IL code flows better and has 3 jumps (the compiler optimized this a bit):
First jump: when Length is 0 to a part where the code jumps again (Third jump) to the end.
Second: in the middle of the second condition to avoid one instruction.
Third: if the second condition is false, jump to the end.
Anyway, the program counter will always jump.
In theory, inverting if could lead to better performance if it increases branch prediction hit rate. In practice, I think it is very hard to know exactly how branch prediction will behave, especially after compiling, so I would not do it in my day-to-day development, except if I am writing assembly code.
More on branch prediction here.
That is simply controversial. There is no "agreement among programmers" on the question of early return. It's always subjective, as far as I know.
It's possible to make a performance argument, since it's better to have conditions that are written so they are most often true; it can also be argued that it is clearer. It does, on the other hand, create nested tests.
I don't think you will get a conclusive answer to this question.
There are a lot of insightful answers there already, but still, I would to direct to a slightly different situation: Instead of precondition, that should be put on top of a function indeed, think of a step-by-step initialization, where you have to check for each step to succeed and then continue with the next. In this case, you cannot check everything at the top.
I found my code really unreadable when writing an ASIO host application with Steinberg's ASIOSDK, as I followed the nesting paradigm. It went like eight levels deep, and I cannot see a design flaw there, as mentioned by Andrew Bullock above. Of course, I could have packed some inner code to another function, and then nested the remaining levels there to make it more readable, but this seems rather random to me.
By replacing nesting with guard clauses, I even discovered a misconception of mine regarding a portion of cleanup-code that should have occurred much earlier within the function instead of at the end. With nested branches, I would never have seen that, you could even say they led to my misconception.
So this might be another situation where inverted ifs can contribute to a clearer code.
It's a matter of opinion.
My normal approach would be to avoid single line ifs, and returns in the middle of a method.
You wouldn't want lines like it suggests everywhere in your method but there is something to be said for checking a bunch of assumptions at the top of your method, and only doing your actual work if they all pass.
In my opinion early return is fine if you are just returning void (or some useless return code you're never gonna check) and it might improve readability because you avoid nesting and at the same time you make explicit that your function is done.
If you are actually returning a returnValue - nesting is usually a better way to go cause you return your returnValue just in one place (at the end - duh), and it might make your code more maintainable in a whole lot of cases.
I'm not sure, but I think, that R# tries to avoid far jumps. When You have IF-ELSE, compiler does something like this:
Condition false -> far jump to false_condition_label
true_condition_label:
instruction1
...
instruction_n
false_condition_label:
instruction1
...
instruction_n
end block
If condition is true there is no jump and no rollout L1 cache, but jump to false_condition_label can be very far and processor must rollout his own cache. Synchronising cache is expensive. R# tries replace far jumps into short jumps and in this case there is bigger probability, that all instructions are already in cache.
I think it depends on what you prefer, as mentioned, theres no general agreement afaik.
To reduce annoyment, you may reduce this kind of warning to "Hint"
My idea is that the return "in the middle of a function" shouldn't be so "subjective".
The reason is quite simple, take this code:
function do_something( data ){
if (!is_valid_data( data ))
return false;
do_something_that_take_an_hour( data );
istance = new object_with_very_painful_constructor( data );
if ( istance is not valid ) {
error_message( );
return ;
}
connect_to_database ( );
get_some_other_data( );
return;
}
Maybe the first "return" it's not SO intuitive, but that's really saving.
There are too many "ideas" about clean codes, that simply need more practise to lose their "subjective" bad ideas.
There are several advantages to this sort of coding but for me the big win is, if you can return quick you can improve the speed of your application. IE I know that because of Precondition X that I can return quickly with an error. This gets rid of the error cases first and reduces the complexity of your code. In a lot of cases because the cpu pipeline can be now be cleaner it can stop pipeline crashes or switches. Secondly if you are in a loop, breaking or returning out quickly can save you a lots of cpu. Some programmers use loop invariants to do this sort of quick exit but in this you can broke your cpu pipeline and even create memory seek problem and mean the the cpu needs to load from outside cache. But basically I think you should do what you intended, that is end the loop or function not create a complex code path just to implement some abstract notion of correct code. If the only tool you have is a hammer then everything looks like a nail.