How does one convert between System.Drawing.Icon type and byte[]? I'm looking for something simple that can (hopefully) work in .NET2.
You go via a MemoryStream, basically:
public static byte[] IconToBytes(Icon icon)
{
using (MemoryStream ms = new MemoryStream())
{
icon.Save(ms);
return ms.ToArray();
}
}
public static Icon BytesToIcon(byte[] bytes)
{
using (MemoryStream ms = new MemoryStream(bytes))
{
return new Icon(ms);
}
}
(Historical note: I wasn't sure whether or not it was safe to dispose of the stream passed to the constructor. It isn't safe to do so for Bitmap, for example... that holds on to the stream and may read from it later. Apparently it's okay for Icon though. I wish MSDN made this clearer...)
See:
http://social.msdn.microsoft.com/Forums/en-US/csharpgeneral/thread/1551fd3b-02b6-4479-852a-dfea4b610c35
Ex (there are multiple ways)
private byte[] GetBytes( Icon icon )
{
MemoryStream ms = new MemoryStream();
icon.Save( ms );
return ms.ToArray();
}
And:
Bitmap bmpIcon = icon.ToBitmap();
using (System.IO.MemoryStream ms = new System.IO.MemoryStream())
{
bmpIcon.Save(ms, System.Drawing.Imaging.ImageFormat.Bmp);
return ms.ToArray();
}
... And back again
public static Icon IconFromBytes(byte[] bytes) {
using(var ms = new MemoryStream(bytes)) {
return new Icon(ms);
}
}
The Icon class reads from the stream as soon as it's constructed. No harm in closing MS.
Related
ESRI Symbology library is slow and sometimes take longer time than expected.
I wish to serialize a selected range of ImageSource to a cache, string in the memory or file.
I have searched the web but not much on ImageSource.
An interesting thing I have found is "ImageSourceValueSerializer".
Being a 3 months old baby in WPF, I am not so sure how to go about this.
here's how I got the ImageSource:
MultilayerPointSymbol multiLayerSym = await result.GetSymbolAsync() as MultilayerPointSymbol;
RuntimeImage swatch = await multiLayerSym.CreateSwatchAsync();
ImageSource symbolImage = await swatch.ToImageSourceAsync();
Tested Clemen's, the routine:
MultilayerPointSymbol multiLayerSym = await result.GetSymbolAsync() as MultilayerPointSymbol;
RuntimeImage swatch = await multiLayerSym.CreateSwatchAsync();
ImageSource symbolImage = await swatch.ToImageSourceAsync();
byte[] b = ImageSourceBinary(symbolImage);
ImageSource test = BinaryImageSource(b);
In the class:
private byte[] ImageSourceBinary(ImageSource imageSrc)
{
if (imageSrc is BitmapSource bitmapSource)
{
PngBitmapEncoder encoder = new PngBitmapEncoder();
encoder.Frames.Add(BitmapFrame.Create(bitmapSource));
using (MemoryStream stream = new MemoryStream())
{
encoder.Save(stream);
return stream.ToArray();
}
}
return null;
}
private ImageSource BinaryImageSource(byte[] bytes)
{
using (MemoryStream stream = new MemoryStream(bytes))
{
PngBitmapDecoder decoder = new PngBitmapDecoder(stream, BitmapCreateOptions.IgnoreImageCache, BitmapCacheOption.Default);
BitmapFrame bf = decoder.Frames[0];
if (bf is ImageSource imagesource)
return imagesource;
return null;
}
}
The outcome, no image! :(
Check if the ImageSource is a BitmapSource and encode the BitmapSource by one of the BitmapEncoders. Encode into a MemoryStream or a FileStream.
private byte[] ImageSourceToByteArray(ImageSource imageSrc)
{
if (symbolImage is BitmapSource bitmapSource)
{
var encoder = new PngBitmapEncoder();
encoder.Frames.Add(BitmapFrame.Create(bitmapSource));
using (var stream = new MemoryStream())
{
encoder.Save(stream);
return stream.ToArray();
}
}
return null;
}
In order to decode an image from a byte array, do not explictly use a specific BitmapDecoder. Better rely on automatic decoder selection, like shown below. It is also important to set BitmapCacheOption.OnLoad when the stream is closed right after decoding.
private ImageSource ByteArrayToImageSource(byte[] bytes)
{
using (var stream = new MemoryStream(bytes))
{
return BitmapFrame.Create(
stream, BitmapCreateOptions.None, BitmapCacheOption.OnLoad);
}
}
I need to convert a BitmapImage in a byte[] but I don't find how to do it in C# web.
I found examples but none of them work (JpegBitmapEncoder doesn't exist, BitmapImageObject.StreamSource doesn't exist, there isn't WriteableBitmap constructor with BitmapImage as parameter, Extensions.SaveJpeg(parameters) doesn't exist ...).
Examples I found:
Constructor new WriteableBitmap(bitmapImage) doesn't exist.
public static byte[] ConvertToBytes(this BitmapImage bitmapImage)
{
byte[] data;
// Get an Image Stream
using (MemoryStream ms = new MemoryStream())
{
WriteableBitmap btmMap = new WriteableBitmap(bitmapImage);
// write an image into the stream
Extensions.SaveJpeg(btmMap, ms,
bitmapImage.PixelWidth, bitmapImage.PixelHeight, 0, 100);
// reset the stream pointer to the beginning
ms.Seek(0, 0);
//read the stream into a byte array
data = new byte[ms.Length];
ms.Read(data, 0, data.Length);
}
//data now holds the bytes of the image
return data;
}
new WriteableBitmap(img), System.Windows.Media.Imaging.Extensions.SaveJpeg don't exist.
public static byte[] ImageToBytes(BitmapImage img)
{
using (MemoryStream ms = new MemoryStream())
{
WriteableBitmap btmMap = new WriteableBitmap(img);
System.Windows.Media.Imaging.Extensions.SaveJpeg(btmMap, ms, img.PixelWidth, img.PixelHeight, 0, 100);
img = null;
return ms.ToArray();
}
}
imageSource.StreamSource doesn't exist.
public static byte[] ImageToByte(BitmapImage imageSource)
{
Stream stream = imageSource.StreamSource;
Byte[] buffer = null;
if (stream != null && stream.Length > 0)
{
using (BinaryReader br = new BinaryReader(stream))
{
buffer = br.ReadBytes((Int32)stream.Length);
}
}
return buffer;
}
JpegBitmapEncoder doesn't exist.
byte[] data;
JpegBitmapEncoder encoder = new JpegBitmapEncoder();
encoder.Frames.Add(BitmapFrame.Create(bitmapImage));
using(MemoryStream ms = new MemoryStream())
{
encoder.Save(ms);
data = ms.ToArray();
}
Try with the using statement to a namespace in the beginning of your code.
Otherwise there should be some Nuget packages which you could install to achieve your goal.
using System.Drawing;
In Main method
Image img = Image.FromFile("path to the file");
var byteArray = ImageToByte(img);
public static byte[] ImageToByte(Image img)
{
ImageConverter converter = new ImageConverter();
return (byte[])converter.ConvertTo(img, typeof(byte[]));
}
Try this
I think this will help...
public byte[] ConvertBitMapToByteArray(Bitmap bitmap)
{
byte[] result = null;
if (bitmap != null)
{
MemoryStream stream = new MemoryStream();
bitmap.Save(stream, bitmap.RawFormat);
result = stream.ToArray();
}
return result;
}
byte[] foo = System.IO.File.ReadAllBytes("bitmap path");
Or
byte[] foo;
Object obj = YourBitmap;
BinaryFormatter bf = new BinaryFormatter();
using (var ms = new MemoryStream())
{
bf.Serialize(ms, obj);
foo = ms.ToArray();
}
Or
ImageConverter foocon = new ImageConverter();
byte[] foo = (byte[])foocon.ConvertTo(YourBitmap, typeof(byte[]));
Or
MemoryStream ms = new MemoryStream();
Bitmap.Save(ms, YourBitmap.RawFormat);
byte[] foo = ms.ToArray();
Finally, it seems that, obviously, it missed some libraries but we are limited with our application, so we decided to recover our pictures by another way. Anyway, thank you all.
I'm trying to compress some text in my UWP application. I created this method to make it easier later on:
public static byte[] Compress(this string s)
{
var b = Encoding.UTF8.GetBytes(s);
using (MemoryStream ms = new MemoryStream())
using (GZipStream zipStream = new GZipStream(ms, CompressionMode.Compress))
{
zipStream.Write(b, 0, b.Length);
zipStream.Flush(); //Doesn't seem like Close() is available in UWP, so I changed it to Flush(). Is this the problem?
return ms.ToArray();
}
}
But unfortunately this always returns 10 bytes, no matter what the input text is. Is it because I don't use .Close() on the GZipStream?
You are returning the byte data too early.
The Close() method is replaced by the Dispose() method. So the GZIP stream will be written only when disposed so after you leave the using(GZipStream) {} block.
public static byte[] Compress(string s)
{
var b = Encoding.UTF8.GetBytes(s);
var ms = new MemoryStream();
using (GZipStream zipStream = new GZipStream(ms, CompressionMode.Compress))
{
zipStream.Write(b, 0, b.Length);
zipStream.Flush(); //Doesn't seem like Close() is available in UWP, so I changed it to Flush(). Is this the problem?
}
// we create the data array here once the GZIP stream has been disposed
var data = ms.ToArray();
ms.Dispose();
return data;
}
I have the following code to convert image to base64:
private void btnSave_Click(object sender, RoutedEventArgs e)
{
StreamResourceInfo sri = null;
Uri uri = new Uri("Checked.png", UriKind.Relative);
sri = Application.GetResourceStream(uri);
BitmapImage bitmap = new BitmapImage();
bitmap.SetSource(sri.Stream);
WriteableBitmap wb = new WriteableBitmap(bitmap);
MemoryStream ms = new MemoryStream();
wb.SaveJpeg(ms, bitmap.PixelWidth, bitmap.PixelHeight, 0, 100);
byte[] imageBytes = ms.ToArray();
base64 = System.Convert.ToBase64String(imageBytes);
}
And the following code to get Bitmap image form base 64:
public static BitmapImage base64image(string base64string)
{
byte[] fileBytes = Convert.FromBase64String(base64string);
using (MemoryStream ms = new MemoryStream(fileBytes, 0, fileBytes.Length))
{
ms.Write(fileBytes, 0, fileBytes.Length);
BitmapImage bitmapImage = new BitmapImage();
bitmapImage.SetSource(ms);
return bitmapImage;
}
}
So when i convert and deconvert it is blank.
I know that deconverter works, because, when i give him exact string:
string base64="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";
Which is my Checked.png converted in online converter. It decompreses perfectly.
And this is my base64, which i get by converting:
"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"
My problem is that string which i get as base64 from my code - is incorrect *What i did wrong?*
What about trying:
public static BitmapImage base64image(string base64string)
{
byte[] fileBytes = Convert.FromBase64String(base64string);
using (MemoryStream ms = new MemoryStream(fileBytes))
{
Image streamImage = Image.FromStream(ms);
context.Response.ContentType = "image/jpeg";
streamImage.Save(context.Response.OutputStream, ImageFormat.Jpeg);
return streamImage;
}
}
I agree with Alexei that your code for reading the image in does look a little strange. I've recently written some code for a similar task that I was doing which might point you in the right direction:
string fileContent = null;
/* Check the file actually has some content to display to the user */
if (uploadFile != null && uploadFile.ContentLength > 0)
{
byte[] fileBytes = new byte[uploadFile.ContentLength];
int byteCount = uploadFile.InputStream.Read(fileBytes, 0, (int)uploadFile.ContentLength);
if (byteCount > 0)
{
fileContent = CreateBase64Image(fileBytes);
}
}
private string CreateBase64Image(byte[] fileBytes)
{
Image streamImage;
/* Ensure we've streamed the document out correctly before we commit to the conversion */
using (MemoryStream ms = new MemoryStream(fileBytes))
{
/* Create a new image, saved as a scaled version of the original */
streamImage = ScaleImage(Image.FromStream(ms));
}
using (MemoryStream ms = new MemoryStream())
{
/* Convert this image back to a base64 string */
streamImage.Save(ms, System.Drawing.Imaging.ImageFormat.Png);
return Convert.ToBase64String(ms.ToArray());
}
}
not an answer: more of a long comment ... OP states that decoding code works perfectly fine, also it looks suspicios. Also code assumed to be verified to work on PNG images, but saving code explicitly produces valid JPG with SaveJpeg call...
Your code that creates stream for reading looks strange - you create stream over existing byte array, than write the same bytes into that stream, and that pass that stream without seeking back to 0 to some method.
Potential fix (assuming BitampImage can accept JPG stream):
don't call Write at all as stream already have the bytes you want
set ms.Position = 0 after writing to the stream.
Note: I'm not sure if it is OK to dispose stream that is a source for BitmapImage, you may need to remove using too.
Using C#, I'm trying to load a JPEG file from disk and convert it to a byte array. So far, I have this code:
static void Main(string[] args)
{
System.Windows.Media.Imaging.BitmapFrame bitmapFrame;
using (var fs = new System.IO.FileStream(#"C:\Lenna.jpg", FileMode.Open))
{
bitmapFrame = BitmapFrame.Create(fs);
}
System.Windows.Media.Imaging.BitmapEncoder encoder =
new System.Windows.Media.Imaging.JpegBitmapEncoder();
encoder.Frames.Add(bitmapFrame);
byte[] myBytes;
using (var memoryStream = new System.IO.MemoryStream())
{
encoder.Save(memoryStream); // Line ARGH
// mission accomplished if myBytes is populated
myBytes = memoryStream.ToArray();
}
}
However, executing line ARGH gives me the message:
COMException was unhandled. The handle is invalid. (Exception from
HRESULT: 0x80070006 (E_HANDLE))
I don't think there is anything special about the file Lenna.jpg - I downloaded it from http://computervision.wikia.com/wiki/File:Lenna.jpg. Can you tell what is wrong with the above code?
Check the examples from this article: http://www.codeproject.com/KB/recipes/ImageConverter.aspx
Also it's better to use classes from System.Drawing
Image img = Image.FromFile(#"C:\Lenna.jpg");
byte[] arr;
using (MemoryStream ms = new MemoryStream())
{
img.Save(ms, System.Drawing.Imaging.ImageFormat.Jpeg);
arr = ms.ToArray();
}
Other suggestion:
byte[] image = System.IO.File.ReadAllBytes ( Server.MapPath ( "noimage.png" ) );
Should be working not only with images.
public byte[] imageToByteArray(System.Drawing.Image imageIn)
{
MemoryStream ms = new MemoryStream();
imageIn.Save(ms,System.Drawing.Imaging.ImageFormat.Gif);
return ms.ToArray();
}
The reason this error happens is because the BitmapFrame.Create() method you are using defaults to an OnDemand load. The BitmapFrame doesn't try to read the stream it's associated with until the call to encoder.Save, by which point the stream is already disposed.
You could either wrap the entire function in the using {} block, or use an alternative BitmapFrame.Create(), such as:
BitmapFrame.Create(fs, BitmapCreateOptions.None, BitmapCacheOption.OnLoad);