Develop Reference

How to convert 16 digit epoch timestamp to datetime in c# without losing microseconds precision

public static DateTime ToDateTimeForEpochMSec(this double microseconds)
{
var epoch = new DateTime(1970, 1, 1, 0, 0, 0, DateTimeKind.Utc);
DateTime tempDate = epoch.AddMilliseconds(microseconds / 1000);
return tempDate;
}
tried using this code but losing microseconds precison in the datetime

You need to adjust your code to handle microseconds. We know that 1000 microseconds = 1 millisecond, therefore 1/1000th of a millisecond is a microsecond. Now, after AddMilliseconds, the next level of precision that DateTime supports is Ticks, so we'll have to use that.
We can find the number of ticks in a millisecond by using TimeSpan:
long ticksPerMillisecond = TimeSpan.TicksPerMillisecond;
If 1 microsecond is 1/1000th of a millisecond, then it stands to reason that we need 1/1000th of the ticks to represent a microsecond. The documentation defines a tick as:
one hundred nanoseconds or one ten-millionth of a second. There are 10,000 ticks in a millisecond (see TicksPerMillisecond) and 10 million ticks in a second.
We should therefore be safe to use integer division to divide by 1000:
long ticksPerMicrosecond = TimeSpan.TicksPerMillisecond / 1000;
Now we can convert the number of microseconds into ticks:
long ticks = (long)(microseconds * ticksPerMicrosecond);
And add it to the epoch:
DateTime tempDate = epoch.AddTicks(ticks);
Putting it all together we get:
public static DateTime ToDateTimeForEpochMSec(this double microseconds)
{
var epoch = new DateTime(1970, 1, 1, 0, 0, 0, DateTimeKind.Utc);
long ticksPerMicrosecond = TimeSpan.TicksPerMillisecond / 1000;
long ticks = (long)(microseconds * ticksPerMicrosecond);
DateTime tempDate = epoch.AddTicks(ticks);
return tempDate;
}
Try it online
By the way, I'm not sure why microseconds is a double here. It seems like it would be fine as a long.

How do i get the minutes part when i subtract two time values

I want minutes part when i subtract two time values.
I am subtracting current time with 11:30 PM and the result i need in minutes.
I am trying the following code in c#.
TimeSpan eTs = new TimeSpan(23, 30, 00);
int min = System.DateTime.Now.Minute - eTs.Minutes;
but its giving wrong values.
Any help?
Thanks in advance.

It gives wrong value because you are substracting ints. It could even give negative numbers. You should substract the TimeSpan from the DateTime, which gives you another DateTime and use it's Minute property.
var eTs = new TimeSpan(23, 30, 00);
var min = (System.DateTime.Now - eTs).Minute;
EDIT
I am subtracting current time with 11:30 PM and the result i need in
minutes.
No, you are substracting 23 hours and 30 minutes from the current date time.
If you want to know how much minutes have passed since 11:30 PM (what day/month/year), you should:
var min = (System.DateTime.Now - somePastDate).TotalMinutes; //somePastDate must be a DateTime

Do you wanna subtract 2 dateTime and Get the total in minutes try this:
DateTime data = DateTime.Now;
DateTime data2 = DateTime.Now.AddDays(-2);
TimeSpan sub = data - data2;
Console.WriteLine(sub.TotalMinutes);
Or If you wanna subtract minutes from a datetime try this
TimeSpan eTs = new TimeSpan(23, 30, 00);
DateTime data2 = System.DateTime.Now.AddMinutes(-eTs.TotalMinutes);
Console.WriteLine(data2);

Difference between two times C# [duplicate]

How do I get the time difference between two DateTime objects using C#?

The following example demonstrates how to do this:
DateTime a = new DateTime(2010, 05, 12, 13, 15, 00);
DateTime b = new DateTime(2010, 05, 12, 13, 45, 00);
Console.WriteLine(b.Subtract(a).TotalMinutes);
When executed this prints "30" since there is a 30 minute difference between the date/times.
The result of DateTime.Subtract(DateTime x) is a TimeSpan Object which gives other useful properties.

You want the TimeSpan struct:
TimeSpan diff = dateTime1 - dateTime2;
A TimeSpan object represents a time interval (duration of time or elapsed time) that is measured as a positive or negative number of days, hours, minutes, seconds, and fractions of a second. The TimeSpan structure can also be used to represent the time of day, but only if the time is unrelated to a particular date.
There are various methods for getting the days, hours, minutes, seconds and milliseconds back from this structure.
If you are just interested in the difference then:
TimeSpan diff = (dateTime1 - dateTime2)).Duration();
will give you the positive difference between the times regardless of the order.
If you have just got the time component but the times could be split by midnight then you need to add 24 hours to the span to get the actual difference:
TimeSpan diff = dateTime1 - dateTime2;
if (diff < 0)
{
diff = diff + TimeSpan.FromDays(1);
}

What you need is to use the DateTime classs Subtract method, which returns a TimeSpan.
var dateOne = DateTime.Now;
var dateTwo = DateTime.Now.AddMinutes(-5);
var diff = dateTwo.Subtract(dateOne);
var res = String.Format("{0}:{1}:{2}", diff.Hours,diff.Minutes,diff.Seconds));

The way I usually do it is subtracting the two DateTime and this gets me a TimeSpan that will tell me the diff.
Here's an example:
DateTime start = DateTime.Now;
// Do some work
TimeSpan timeDiff = DateTime.Now - start;
timeDiff.TotalMilliseconds;

IF they are both UTC date-time values you can do TimeSpan diff = dateTime1 - dateTime2;
Otherwise your chance of getting the correct answer in every single possible case is zero.

var startDate = new DateTime(2007, 3, 24);
var endDate = new DateTime(2009, 6, 26);
var dateDiff = endDate.Subtract(startDate);
var date = string.Format("{0} years {1} months {2} days", (int)dateDiff.TotalDays / 365,
(int)(dateDiff.TotalDays % 365) / 30, (int)(dateDiff.TotalDays % 365) / 30);
Console.WriteLine(date);

private void button1_Click(object sender, EventArgs e)
{
TimeSpan timespan;
timespan = dateTimePicker2.Value - dateTimePicker1.Value;
int timeDifference = timespan.Days;
MessageBox.Show(timeDifference.ToString());
}

You can use in following manner to achieve difference between two Datetime Object. Suppose there are DateTime objects dt1 and dt2 then the code.
TimeSpan diff = dt2.Subtract(dt1);

You need to use a TimeSpan. Here is some sample code:
TimeSpan sincelast = TimeSpan.FromTicks(DateTime.Now.Ticks - LastUpdate.Ticks);

Change datetime to number like in jquery

In jquery I do this:
new Date(2009, 12, 1)).getTime()
and I got a huge number like this 1262304000000
How can I change the datetime variable in c# to get the same result that I would get in jquery?

The JavaScript getTime function returns the number of milliseconds since midnight on 1st January 1970.
So to get the same figure from a .NET System.DateTime object, you must subtract the epoch of 1st January 1970 and return the TotalMilliseconds property of the resulting TimeSpan:
var dateOfInterest = new DateTime(2009,12,1);
var epoch = new DateTime(1970,1,1);
var differenceInMilliseconds = (dateOfInterest - epoch).TotalMilliseconds;

C# has DateTime.Ticks Property but this doesn't exactly do with getTime(). Looks like there is no exactly equavalent in C#. You can divide result with 10.000 but still it calculates from 0001 year. Javascripts's getTime() method calculates from 1970.
Gets the number of ticks that represent the date and time of this
instance.
A single tick represents one hundred nanoseconds or one ten-millionth
of a second. There are 10,000 ticks in a millisecond.
The value of this property represents the number of 100-nanosecond
intervals that have elapsed since 12:00:00 midnight, January 1, 0001,
DateTime dt = new DateTime(2009, 12, 1);
dt.Ticks.Dump(); // 633952224000000000
From http://www.w3schools.com/jsref/jsref_gettime.asp
The getTime() method returns the number of milliseconds between
midnight of January 1, 1970 and the specified date.
As a better solution, you can use TimeSpan structure to subtract your dates and use TotalMilliseconds property like;
DateTime start = new DateTime(2009, 12, 1);
DateTime end = new DateTime(1970, 1, 1);
double miliseconds = (start - end).TotalMilliseconds;
miliseconds.Dump(); // 1259625600000

subtract 2 datetime fields to get the days left difference

Would appreciate it if anyone can help me figure out to substract 2 datetime fields to get the days left difference.

This is very easy to do with C#. For comparing DateTimes, we have a class called TimeSpan. The TimeSpan structure, in this case, would be defined as the difference between your two datetimes.
Let's say that your DateTimes are called start and end.
DateTime start = new DateTime(2009, 6, 14);
DateTime end = new DateTime(2009, 12, 14);
We have established our DateTimes to June 14, 2009 and December 14, 2009.
Now, let's find the difference between the two. To do this, we create a TimeSpan:
TimeSpan difference = end - start;
With this TimeSpan object, you can express the difference in times in many different ways. However, you specifically asked for the difference in days, so here's how you can get that:
Console.WriteLine("Difference in days: " + difference.Days);
Thus, the property is called TimeSpan.Days.
Final Code
//establish DateTimes
DateTime start = new DateTime(2009, 6, 14);
DateTime end = new DateTime(2009, 12, 14);
TimeSpan difference = end - start; //create TimeSpan object
Console.WriteLine("Difference in days: " + difference.Days); //Extract days, write to Console.
For more information on using the TimeSpan structure, see this MSDN documentation (especially the C# examples).
Hope I helped!
UPDATE: Some answers have suggested taking doing subtraction in one step, such as with:
int days = (dt2 - dt1).Days;
or
int numDaysDiff = Math.Abs(date2.Subtract(date1).Days);
However, they are the same thing as in my answer, only shortened. This is because the DateTime.Subtract() method and the subtraction operator of DateTimes returns a TimeSpan, from which you can then access the amount of days. I have specifically used the longer approach in my code sample so that you clearly understand what is going on between your DateTime and TimeSpan objects and how it all works. Of course, the other approaches I just mentioned are fine, too.
UPDATE #2:
A very similar question was asked before, and it can be found here. However, the main point of that question was why the code sample (which is essentially equivalent to that of all the answers) sometimes provides an answer which is a day off. I think this is also important to this question.
As the main answer to the other question suggests, you can use this code:
int days = (int)Math.Ceiling(difference.TotalDays);
This code uses Math.Ceiling, which, according to MSDN, is:
Returns the smallest integral value
that is greater than or equal to the
specified double-precision
floating-point number.
How Do You Want to Count the Days?
Thus, we now have an issue with how you want to count the days. Do you want to count part of a day (such as .5 of a day) as:
A full day - this would use Math.Ceiling to round up TimeSpan.TotalDays, so that you're counting started days.
Part of a day - you can just return the TimeSpan.TotalDays (not rounded) as a decimal (in the double datatype)
Nothing - you can ignore that part of a day and just return the TimeSpan.Days.
Here are code samples for the above:
Counting as a full day (using Math.Ceiling() to round up):
//establish DateTimes
DateTime start = new DateTime(2009, 6, 14);
DateTime end = new DateTime(2009, 12, 14);
TimeSpan difference = end - start; //create TimeSpan object
int days = (int)Math.Ceiling(difference.TotalDays); //Extract days, counting parts of a day as a full day (rounding up).
Console.WriteLine("Difference in days: " + days); //Write to Console.
Counting as part of a day (NOT using Math.Ceiling(), instead leaving in decimal form as a part of a day):
//establish DateTimes
DateTime start = new DateTime(2009, 6, 14);
DateTime end = new DateTime(2009, 12, 14);
TimeSpan difference = end - start; //create TimeSpan object
double days = difference.TotalDays; //Extract days, counting parts of a day as a part of a day (leaving in decimal form).
Console.WriteLine("Difference in days: " + days); //Write to Console.
Counting as nothing of a day (rounding down to the number of full days):
//establish DateTimes
DateTime start = new DateTime(2009, 6, 14);
DateTime end = new DateTime(2009, 12, 14);
TimeSpan difference = end - start; //create TimeSpan object
int days = difference.TotalDays; //Extract days, counting parts of a day as nothing (rounding down).
Console.WriteLine("Difference in days: " + days); //Write to Console.

Use
TimeSpan
DateTime departure = new DateTime(2010, 6, 12, 18, 32, 0);
DateTime arrival = new DateTime(2010, 6, 13, 22, 47, 0);
TimeSpan travelTime = arrival - departure;

The easiest way out is, making use of TimeSpan().
This Subtract function will return you the difference between two dates in terms of time span. Now you can fetch fields like days, months etc. To access days you can make use of
Here is the sample code;
VB.Net code;
Dim tsTimeSpan As TimeSpan
Dim ldDate1 as Date
Dim ldDate2 as Date
'Initialize date variables here
tsTimeSpan = ldDate1 .Subtract(ldDate2)
Dim NumberOfDays as integer = tsTimeSpan.days
C#.Net code;
DateTime lDate1;
DateTime lDate2;
TimeSpan tsTimeSpan ;
int NumberOfDays;
//Initialize date variables here
tsTimeSpan = ldDate1 .Subtract(ldDate2);
NumberOfDays = tsTimeSpan.days;

DateTime dt1 = new DateTime(2009,01,01,00,00,00);
DateTime dt2 = new DateTime(2009,12,31,23,59,59);
int days = (dt2 - dt1).Days;

Number of Days Difference
These answers take the number of days as an int from the System.TimeSpan structure that is the result of subtracting two System.DateTime fields...
Quick answer - gets the number of days difference.
int numDaysDiff = date2.Subtract(date1).Days;
Alternate answer - uses Math.Abs to ensure it's not a negative number, just in case the dates might be supplied in either order.
int numDaysDiff = Math.Abs( date2.Subtract(date1).Days );
Some sample data to finish it off using System namespace:
// sample data
DateTime date1 = DateTime.Now;
DateTime date2 = DateTime.Now.AddDays(10);
MSDN References (and more sample code ):
System.TimeSpan structure
System.DateTime structure
System.Math.Abs(..) method

DateTime theDate = DateTime.Today;
int datediff = theDate.Subtract(expiryDate).Negate().Days;
if expiryDate > theDate then you get Negative value: -14
expiryDate is less than theDate then you get positive value: 14
You May obviously want this in a scenario such as
Send a Notification Email 14days before expiry
Send another notification Email 14 days after expiry
You need a difference that could be negative value

You should look at TimeSpan.

To get the exact days ignoring the time section
DateTime d1 = Convert.ToDateTime(DateTime.Now.ToShortDateString());
DateTime d2 = Convert.ToDateTime(DateTime.Now.AddDays(46).ToShortDateString());
var days = Convert.ToInt32(d2.Subtract(d1).TotalDays)