how do i ignore exceptions in c#?
i am reading a remote xml file, and sometimes the tag doesnt exist and it throws an exception. how do i ignore the exception and goto next?
how do i ignore exceptions in c#?
Don't.
Exceptions are trying to tell you that something is wrong with your code.
If you're getting an exception during XML parsing because a specific element doesn't exist, then rewrite the code to check whether or not that element exists before trying to read it.
If you are asking how to handle a specific exception, then you can wrap it in a try-catch block:
XmlDocument doc = new XmlDocument();
try
{
doc.Load(url);
}
catch (XmlException)
{
// Handle the error here
return (default value);
}
// Start going through the XmlDocument
The above code would handle the specific case where the XML is malformed. However, if the XML is well-formed but your code is throwing an exception because a particular element does not exist and you assumed that it would, then don't use exception-handling code at all; simply check that it exists before trying to read it.
try
{
yourXmlDocument.LoadXML("xml is here");
}catch{
//It has failed.
}
You could be even more specific and only catch errors from LoadXML
try
{
yourXmlDocument.LoadXML("xml is here");
}catch(System.Xml.XmlException e){
//It has failed.
}
Well, to answer you question, if you put your code in a Try Catch block and then for the exception in question, simply catch it and do nothing.
That being said, why not just check for a null tag while processing rather than rely on exception handling? Exception handling has more overhead generally than checking for a condition and if there is an expected case where something may not exist, you should handle that case in your code.
Never ever ignore exceptions. These "I am sure I can safely ignore this" sometimes cause the worst and hardest to find bugs.
Always at least log the exception. Optionally, also use Debug.Fail method, which will display a dialog with exception details in your debug build - this will help you to diagnose most problems much better.
In this particular case (XML parsing), there surely is a way how to handle cases when the data is not found gracefully, without catching and ignoring exceptions - feel free to edit the answer to show us what exact xml parsing method you are using and we can tell you how to avoid the exceptions in the first place.
Since you may be asking about a generic case, this is how you deal with exceptions if you want to "ignore" them (if you do not wish to display them to the user):
try
{
//do something that throws an exception
}
catch(Exception ex) //or even better: catch a specific exception type
{
//do not ignore the exception, at least log it
System.Diagnostics.Debug.Fail(ex.Message, ex.ToString());
log.Debug("Probably expected error happened: " + ex.ToString());
}
You can simply put a try/catch around the code and do nothing with the exception that is generated.
If the exception is remote, like you say, and you're only getting the string version of its message or result, then you won't be able to use exception handling mechanisms on it. However you might be able to cobble something together where you recognize the strings and do something.
If you get the Exception object then you can pull out the good old try/catch stuff on it.
Use a try-catch block. http://msdn.microsoft.com/en-us/library/0yd65esw%28VS.80%29.aspx
Related
Is a simple question that seeks a simple answer. No code is needed as a demonstration. When i call a function it returns an exception and the whole function stops. How can I ignore the exception and continue the function?
You cannot ignore the exception.
If you do not catch it then the exception will propogate up the call stack until somebody does catch it and handle it, or it reaches the top of the call stack and your program halts.
To avoid that, you simply catch the exception and decide how to handle it. If handling it means doing nothing it then simply ... do nothing when you catch the exception:
try
{
SomeFnWhichThrowsAnException();
}
catch
{
// NO-OP
}
The // NO-OP comment (short of "No-Operation") is an indicator I use to indicate that the "handling" of the exception is to deliberately do nothing, to avoid any potential misunderstanding on the part of anyone reading suh code in the future and interpreting an empty catch block as an error or an oversight.
It should be mentioned that even with a comment and a "good reason" to do nothing in response to an exception, this is highly suspect and is a very bad code smell.
It may be more common to specifically ignore very specific exceptions or to do so only in specific circumstances, but to ignore every possible exception is highly unadvisable (consider that this will include exceptions such as stack overflows or out of memory conditions etc).
try
{
MyFunctionThatErrors();
}
catch{}
A try...catch statement should do this job:
try {
// your code that might throw an exception here
} catch {
}
// code here will execute even if there is an exception
However, try...catch statements are not designed to act as a flow control statement. You shouldn't just ignore the exception without a good reason. You should avoid the exception being thrown in the first place.
For example, Convert.ToInt32 can throw an exception if the string parameter is in the wrong format. You shouldn't use try...catch here as a way to detect invalid user input. You should check whether the input is valid using some other method, like regex for example.
You can use a try {..} catch {..} statement.
Here's the reference docs.
https://learn.microsoft.com/en-us/dotnet/csharp/language-reference/keywords/try-catch
All the time, to avoid any run time error, I use the Exception handler:
as the following:
try
{
//My code which may raise an error.
}
catch (Exception ee)
{
string message = ee.Message;
ShowMessage();
}
My question is:
Is this considered as a good practice or bad practice? (I use the same
lines all the time)
What about the performance issue every time declaring a string?
When using those lines with a method which return a value, the
returning must be after the catch?
That's bad code. Actually very bad.
As all you do with the error message is to assign it to a string that you never use, you are effectively just catching the exception and ignoring it. This is pretty much the worst thing that you can do with an exception, as the program will continue on as if nothing happened, likely with unusable or corrupted data.
When catching exceptions:
Use a more specific Exception type, for example SqlException or IOException, so that you only capture the exceptions that you intend to catch, and that you know how to handle.
When catching an exception, either really handle it, or rethrow it so that it can be handled at a different level.
You should handle known issues first to improve performance, such as null references, empty strings, etc.
Use exceptions for exceptional cases.
Declaring the string isn't a bad thing in there, but its not doing anything other than holding another reference.
You can safely return from a try block. But as Damokles states, you should also have another return else where.
The general structure of exception handling is the following:
try
{
//do struff here
}
catch (...)
{
//handle exception here
}
finally
{
//clean up here
}
There are a couple of things to note in your code that are not entirely right (they are terrible in fact :p):
Only catch exceptions you are ready to handle and do not handle those you are not. This means that you should only catch particular exceptions (FileNotFoundException, ArgumentOutOfRangeException, whatever) that you know can happen in exceptional cases (never use exception handling as a normal execution flow tool). Catching System.Exception is considered bad practice (unless it is for logging purposes and you throw; immeadiately afterwards) because this exception can be thrown by any darn thing, which with all probability you have not foreseen when writing your code and therefore have no clue on how to handle it correctly.
Depending on your situation you should consider using finally blocks in order to clean up whatever you can before exiting the method (be it because of normal execution flow, or an unhandled exception). Note that finally blocks will be (normally) always executed before exiting the method scope.
Do not swallow exceptions and the information they contain. You should consider logging it somewhere (myApplication.log file) and show the user a more friendly "we have aproblem" message. Otherwise the only information you will have when bugs crop up in production will be whatever you show the user. All the valuable information stored in the caught exception will be lost.
There is no need to add exception handler in all the functions. Add the exception handling at the main() which wraps all the functions. Only add exceptions handlers at place where you intend to do some specific exception handling operation to prevent the application from crash.
Return value can be added in the try block.
I assume you are doing this to IGNORE exceptions? In that case you can do it like this:
try
{
// code
}
catch {}
This will catch all exceptions and do nothing with them(ignore).
I would however not recommend doing that, because you will now never know why some functionality in your system is not working as expected because no errors are thrown. I would then recommend at the minimum at least LOG the exception so that you can troubleshoot problems later. A better approach would be to log the exception and re-throw it and then have friendly exception handling at the UI layer.
This is considered a bad practice as you basically ignore the exception. You don't even show it to the user!
It's even double bad, because it is also a bad practice to copy-paste the same lines all over your code.
Recommended usage is to either handle the exception, or do not touch it at all. As it's rather uncommon that the code knows how to handle an exception, the common case is to not catch it at all!
Of course, way up in your main loop, you'll have a try-catch, which will log the exception and/or report the exception to the user.
With respect to your second question: Yes, a return statement can be part of the catch block. But if you don't know what to return, you should not catch the exception!
You should only catch exceptions that you are expecting and know how to handle them. by catch (Exception) you are catching all kind of exceptions in a method is not a good practice.
You can catch all exceptions to just log them or restart you application on fail..
For example
try
{
//My code which may raise an error.
}
catch (FileNotFoundException)//you are expecting this exception
{
//handle file not found here.
}
catch (Exception ee)
{
string message = ee.Message;
Log(message);
throw;//rethrow the exception
}
What is the difference (if any) in writing:
if (File.Exists(filePath))
//Something
else
throw new FileNotFoundException();
And surrounding the if/else block, above, in a try brace with a catch.
In fact, is the catch needed? If so, what would it catch? Or perhaps a better comparison is to put the if part of the above block in a try brace (without the if statement) and catch a FileNotFoundException, throwing up the call stack (throw).
Thanks
I don't see any reason to throw an exception that would be thrown anyways. It might be more useful to throw an exception with a higher level of abstraction though.
By surrounding the if block with a try catch means you are going to have to handle the missing file there and then in the catch (see #lukas's answer). If you are going to handle the missing file in this code, then you don't need the else-throw, because you already know the file is missing from the first if. On the other hand, if you want the calling code (somewhere higher up the call stack) to handle the missing file, then passing that information on in an exception is ok, but you don't want to then go an wrap the throw in a try-catch because it won't get thrown out of this block of code.
One is safer than the other.
When you check if a file exists, nothing guarantees that file is there further down the execution of the method.
If you surround it with a Try / Catch block, you can elegantly catch the glitch, act accordingly and wrap up any thing you want to in the Finally block. For example, closing the stream to the file.
Yes, catch is needed, because of race condition. Other process/thread can delete/change/move/etc. the file. And you cannot prevent it.
try
{
using (//your file opens here)
{
}
}
catch (FileNotFoundException)
{
// handle FileNotFoundException
}
Exception handling is an application concern. If you are interesting in either (a) an exception or (b) a specific exception then you use try/catches.
Since exception handling is many orders of magnitude slower than an if check, and you know the file may not be present, then you can either take the performance hit, or write your code as you have. It's simply your choice in taking the performance hit on the occasions the file isn't present.
There are people who say you should only catch an exception if you can do something about it, and in the main they are correct however there is a certain place I always use exception handling.
When returning from across a service
boundary. Sometimes this is security
related (hiding implementation
details) though mostly to improve
runtime diagnostics
When issuing a call across a service
boundary. This is usually reliability
related, though again most to aid
trouble shooting.
When using exception handling for diagnostics I essentially just log the exception and raise back up.
I have the following code that throws
try
{
fileInfo.CopyTo(destination, true);
}
catch (IOException ioex)
{
}
Log4net log :
35552|384|1|ERROR| at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
I need to eat this exception and not log it. I need to supress this error message.
How to do that?
I suspect you'll need to look at Log4net to see if there's a way to either only log unhandled exceptions (if that's what's desired) or a way to tell it to ignore an exception in a specific place.
Why specifically do you want to hide this though? If it's because this happens a lot and fills up the log with useless info then you may want to do some validation before calling CopyTo to make sure there's a reasonable chance it'll succeed (i.e. path is valid, file exists, etc). This will also cut down on the number of exceptions throw in the first place. Exceptions are somewhat expensive performance-wise so you'll want to prevent them from occuring if you can.
As I mentioned in a comment on the question, you can't remove the exception handling entirely because there's always a chance another program deleted the file in between checking it's existing and actually calling CopyTo, but it should be an extremely rare occurrence.
If this isn't happening frequently and/or you're already doing checks, what harm is there in having this occasionally logged?
Put the function call in a try/catch, catch the exception in question, and supply an empty block:
try
{
fileInfo.CopyTo(destination, true);
}
catch (Exception)
{
// do nothing
}
Note that catching Exception (rather than the proper subclass) is TERRIBLE practice.
Okay, the question was edited stealthily as I wrote this. I have no clue about log4net logging all exceptions that pass through the CLR at all. I'll be deleting this shortly, but for now I'm leaving it up in case of further comment.
Closed. This question is opinion-based. It is not currently accepting answers.
Want to improve this question? Update the question so it can be answered with facts and citations by editing this post.
Closed 5 years ago.
Improve this question
Sometimes I do this and I've seen others doing it too:
VB:
Try
DontWannaCatchIt()
Catch
End Try
C#:
try
{
DontWannaCatchIt();
}
catch {}
I know I should catch every important exception that I'm expecting and do something about it, but sometimes it's not important to - or am I doing something wrong?
Is this usage of the try block incorrect, and the requirement of at least one catch or finally block an indication of it?
Update:
Now I understand the reason for this, and it's that I should at least comment on the empty catch block so others understand why it's empty. I should also catch only the exceptions I'm expecting.
Luckily for me I'm coding in VB so I can write it in just one catch:
Catch ex As Exception When TypeOf ex Is IOException _
OrElse TypeOf ex Is ArgumentException _
OrElse TypeOf ex Is NotSupportedException _
OrElse TypeOf ex Is SecurityException _
OrElse TypeOf ex Is UnauthorizedAccessException
'I don't actually care.
End Try
If you don't want to catch it, why are you using try in the first place?
A try statement means that you believe something can go wrong, and the catch says that you can adequately handle that which goes wrong.
So in your estimation:
try
{
//Something that can go wrong
}
catch
{
//An empty catch means I can handle whatever goes wrong. If a meteorite hits the
//datacenter, I can handle it.
}
That catch swallows any exceptions that happen. Are you that confident in your code that you can handle anything that goes wrong gracefully?
The best thing to do (for both yours and your maintenance programmer's sanity) is to explicitly state that which you can handle gracefully:
try
{
//Something that could throw MeteoriteHitDatacenterException
}
catch (MeteoriteHitDatacenterException ex)
{
//Please log when you're just catching something. Especially if the catch statement has side effects. Trust me.
ErrorLog.Log(ex, "Just logging so that I have something to check later on if this happens.")
}
No, you should not catch every important exception. It is okay to catch and ignore exceptions you don't care about, like an I/O error if there's nothing you can do to correct it and you don't want to bother reporting it to the user.
But you need to let exceptions like StackOverflowException and OutOfMemoryException propagate. Or, more commonly, NullReferenceException. These exceptions are typically errors that you did not anticipate, cannot recover from, should not recover from, and should not be suppressed.
If you want to ignore an exception then it is good to explicitly write an empty catch block in the code for that particular exception. This makes it clear exactly what exceptions you're ignoring. Ignoring exceptions very correctly is an opt-in procedure, not an opt-out one. Having an "ignore all exceptions" feature which can then be overridden to not ignore specific types would be a very bad language feature.
How do you know what types of exceptions are important and should not be caught? What if there are exceptions you don't know about? How do you know you won't end up suppressing important errors you're not familiar with?
try
{
}
// I don't care about exceptions.
catch
{
}
// Okay, well, except for system errors like out of memory or stack overflow.
// I need to let those propagate.
catch (SystemException exception)
{
// Unless this is an I/O exception, which I don't care about.
if (exception is IOException)
{
// Ignore.
}
else
{
throw;
}
}
// Or lock recursion exceptions, whatever those are... Probably shouldn't hide those.
catch (LockRecursionException exception)
{
throw;
}
// Or, uh, what else? What am I missing?
catch (???)
{
}
No catch or finally is invalid. Empty catch or finally is valid. Empty catch means you don't care about exceptions, you just try to do something and it doesn't matter if it doesn't work, you just want to go on. Useful in cleanup functions for example.
Also if you haven't to do something about an error maybe you should specify what kind of exception the program has to ignore.
If you have to ignore every exception, I can't see why you can't use try/catch in this way.
It's usually a mistake. Exceptions signal, well, exceptional behavior; when an exception is thrown it should mean that something went wrong. So to continue normal program flow as if nothing went wrong is a way of hiding an error, a form of denial. Instead, think about how your code should handle the exceptional case, and write code to make that happen. An error that propagates because you've covered it up is much harder to debug than one that surfaces immediately.
It's not made easy for you to do because it's considered bad practice by the majority of developers.
What if someone later adds a method call to the body of DontWannaCatchIt() that does throw an exception worth catching, but it gets swallowed by your empty catch block? What if there are some exceptions that you actually would want to catch, but didn't realize it at the time?
If you absolutely must do this, try to be as specific as possible with the type of exception you're going to catch. If not, perhaps logging the exception is an option.
An error exists, has been thrown, and needs to go somewhere. Normal code flow has been aborted and the fan needs cleaned.
No catch block = indeterminate state. Where should the code go? What should it do?
An empty catch block = error handled by ignoring it.
Note: VBA has a vile "On Error Continue"...
The reason I've heard is that if your try fails for ANY reason, giving you control of the error response is highly preferable to giving the Framework control of it, i.e., yellow screen or error 500.
what if you write only code with try
try
{
int j =0;
5/j;
}
this would equivalent to write
int j =0;
5/j;
so writing try does not make any sense , it only increse your count of lines.
now if you write try with empty catch or finally , you are explicitley instructing runtime to behave differently.
so that' why i think empty try block is not possible.
Yes, it is incorrect. It's like goto: one per 100 KLoc is fine, but if you need many of these, you are doing it wrong.
Swallowing exceptions without any reactions is one of the worse things in error handling, and it should at least be explicit:
try
{
DontWannaCatchIt();
}
catch
{
// This exception is ignored based on Spec Ref. 7.2.a,
// the user gets a failure report from the actual results,
// and diagnostic details are available in the event log (as for every exception)
}
The further-away-look:
Error handling is an aspect: in some contexts, an error needs to be thrown and propagate up the call stack (e.g. you copy a file, copy fails).
Calling the same code in a different context might require the error to be tracked, but the operation to continue (e.g. Copying 100 files, with a log indicating which files failed).
Even in this case, an empty catch handler is wrong.
With most languages, there is no other direct implementation than to try+catch within the loop, and build the log in the catch handler. (You could build a mroe flexible mechanism, though: Have a per-call-thread handler that can either throw, or stow away the message. However, interaction with debugging tools suffers without direct language support.)
A sensible use case would be implementing a TryX() from a X(), but that would have to return the exception in question.