Develop Reference

Error in deploying WCF service on WPF application

I am working on WCF application, starting simple HelloWorld service. I have develop simple WPF application to host services, i.e. start and stop service
when I try to test this service with url "http://localhost:8087/MyServices/HelloWorldService" on WCFTestClient, I am getting following error
Error: Cannot obtain Metadata from http://localhost:8087/MyServices/HelloWorldService If this is a Windows (R) Communication Foundation service to which you have access, please check that you have enabled metadata publishing at the specified address. For help enabling metadata publishing, please refer to the MSDN documentation at http://go.microsoft.com/fwlink/?LinkId=65455.WS-Metadata Exchange Error URI: http://localhost:8087/CreditUnionServices/HelloWorldService Metadata contains a reference that cannot be resolved: 'http://localhost:8087/CreditUnionServices/HelloWorldService'. <?xml version="1.0" encoding="utf-16"?><Fault xmlns="http://www.w3.org/2003/05/soap-envelope"><Code><Value>Sender</Value><Subcode><Value xmlns:a="http://schemas.xmlsoap.org/ws/2005/02/sc">a:BadContextToken</Value></Subcode></Code><Reason><Text xml:lang="en-GB">The message could not be processed. This is most likely because the action 'http://schemas.xmlsoap.org/ws/2004/09/transfer/Get' is incorrect or because the message contains an invalid or expired security context token or because there is a mismatch between bindings. The security context token would be invalid if the service aborted the channel due to inactivity. To prevent the service from aborting idle sessions prematurely increase the Receive timeout on the service endpoint's binding.</Text></Reason></Fault>HTTP GET Error URI: http://localhost:8087/CreditUnionServices/HelloWorldService There was an error downloading 'http://localhost:8087/CreditUnionServices/HelloWorldService'. The request failed with HTTP status 400: Bad Request.
app.config
<system.serviceModel>
<services>
<service name="App.Services.Managers.HelloWorldManager">
<endpoint address="HelloWorldService"
binding="wsHttpBinding"
contract="App.Services.Contracts.IHelloWorldService">
</endpoint>
<host>
<baseAddresses>
<add baseAddress="http://localhost:8087/MyService"/>
</baseAddresses>
</host>
</service>
</services>
C# class to open and close service
public class ServicesHostManager
{
ServiceHost _helloWorldServicesHost = new ServiceHost(typeof(HelloWorldManager));
public void ProcessHelloWorldService(string _process)
{
if(!string.IsNullOrEmpty(_process))
{
try
{
if (_process.Equals("open_service"))
{
_helloWorldServicesHost.Open();
}
else if (_process.Equals("close_service"))
{
_helloWorldServicesHost.Close();
}
}
catch (Exception e)
{
System.Windows.MessageBox.Show(e.ToString());
}
}
}

The previous commenter was on the right track, you need to declare a mex endpoint. mex is what provides the MetaData.
Try the following config:
<system.serviceModel>
<services>
<service name="App.Services.Managers.HelloWorldManager" behaviorConfiguration="SimpleWcfServiceBehavior">
<endpoint address="HelloWorldService"
binding="wsHttpBinding"
contract="App.Services.Contracts.IHelloWorldService">
</endpoint>
<endpoint address="mex" binding="mexTcpBinding" bindingConfiguration="" contract="IMetadataExchange"></endpoint>
<host>
<baseAddresses>
<add baseAddress="http://localhost:8087/MyService"/>
</baseAddresses>
</host>
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="SimpleWcfServiceBehavior">
<!-- To avoid disclosing metadata information, set the values below to false before deployment -->
<serviceMetadata httpGetEnabled="true" httpsGetEnabled="true" />
<!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information -->
<serviceDebug includeExceptionDetailInFaults="false"/>
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>

I have update code and is working now,
<system.serviceModel>
<services>
<service name="App.Services.Managers.HelloWorldManager" behaviorConfiguration="DefaultServiceBehavior">
<host>
<baseAddresses>
<add baseAddress="http://localhost:8087/MyService"/>
</baseAddresses>
</host>
<endpoint address="HelloWorldService" binding="wsHttpBinding" contract="App.Services.Contracts.IHelloWorldService"></endpoint>
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="DefaultServiceBehavior">
<serviceMetadata httpGetEnabled="True" httpsGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="False" />
</behavior>
</serviceBehaviors>
</behaviors>

Hitting function but not getting the return value

I've created a simple WCF service for an application that I'm currently working on using DevExtreme.
To test my service, I use Postman, provided from the google play store thing.
The server starts up fine. If I debug my function GetLogins()I can see that Postman invokes this function, but I'm not receiving the return value.
IService.cs:
[ServiceContract]
public interface IService
{
[OperationContract]
[WebInvoke(Method = "GET", ResponseFormat = WebMessageFormat.Json, UriTemplate = "/logins")]
List<Login> GetLogins();
}
Service.cs:
[AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)]
public class Service : IService
{
//Returns all Logins
public List<Login> GetLogins()
{
var list = DAO.Instance.Login.ToList();
return list;
}
}
App.config:
<system.serviceModel>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" />
<services>
<service name="HourRegistrationWCF.Service">
<host>
<baseAddresses>
<add baseAddress="http://localhost:8733/Design_Time_Addresses/HourRegistrationWCF/Service/" />
</baseAddresses>
</host>
<!-- Service Endpoints -->
<!-- Unless fully qualified, address is relative to base address supplied above -->
<endpoint address=""
binding="webHttpBinding"
contract="HourRegistrationWCF.IService"
behaviorConfiguration="REST">
<!--
Upon deployment, the following identity element should be removed or replaced to reflect the
identity under which the deployed service runs. If removed, WCF will infer an appropriate identity
automatically.
-->
<identity>
<dns value="localhost" />
</identity>
</endpoint>
<!-- Metadata Endpoints -->
<!-- The Metadata Exchange endpoint is used by the service to describe itself to clients. -->
<!-- This endpoint does not use a secure binding and should be secured or removed before deployment -->
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" />
</service>
</services>
<behaviors>
<endpointBehaviors>
<behavior name="REST">
<webHttp/>
</behavior>
</endpointBehaviors>
<serviceBehaviors>
<behavior>
<!-- To avoid disclosing metadata information,
set the values below to false before deployment -->
<serviceMetadata httpGetEnabled="True" httpsGetEnabled="True" />
<!-- To receive exception details in faults for debugging purposes,
set the value below to true. Set to false before deployment
to avoid disclosing exception information -->
<serviceDebug includeExceptionDetailInFaults="False" />
</behavior>
</serviceBehaviors>
</behaviors>
<bindings>
<webHttpBinding>
<binding name="webHttpBindingWithJsonP" crossDomainScriptAccessEnabled="true"/>
</webHttpBinding>
</bindings>
I can't seem to find the problem.
Postman response

Net TCP binding: The URI prefix is not recognized

This really is bugging me for a couple of hours. I created the simplest WCF service using a TCP binding.
namespace WcfTcpService
{
public class TestTcpService : ITestTcpService
{
public string Hello(string name)
{
return "Hello, " + name + "!";
}
}
}
namespace WcfTcpService
{
[ServiceContract]
public interface ITestTcpService
{
[OperationContract]
string Hello(string name);
}
}
Web.config file has the following section:
<system.serviceModel>
<services>
<service name="WcfTcpService.TestTcpService" behaviorConfiguration="TestServiceBehavior">
<host>
<baseAddresses>
<add baseAddress="net.tcp://localhost:808/WcfTcpService.TestTcpService" />
</baseAddresses>
</host>
<endpoint address="" binding="netTcpBinding" bindingConfiguration="tcpBinding" contract="WcfTcpService.ITestTcpService"></endpoint>
<endpoint address="mex" binding="mexTcpBinding" bindingConfiguration="" contract="IMetadataExchange"></endpoint>
</service>
</services>
<bindings>
<netTcpBinding>
<binding name="tcpBinding" portSharingEnabled="true">
<security mode="None"></security>
</binding>
</netTcpBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior name="TestServiceBehavior">
<!-- To avoid disclosing metadata information, set the values below to false before deployment -->
<serviceMetadata httpGetEnabled="true" httpsGetEnabled="true"/>
<!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information -->
<serviceDebug includeExceptionDetailInFaults="false"/>
</behavior>
</serviceBehaviors>
</behaviors>
<!--<protocolMapping>
<add binding="basicHttpsBinding" scheme="https" />
<add binding="netTcpBinding" scheme="net.tcp" />
</protocolMapping>-->
<!--<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />-->
</system.serviceModel>
This service is hosted in IIS:
Now, when trying to add a reference to net.tcp://localhost:808/WcfTcpService.TestTcpService from a client application, I keep receiving the error:
The URI prefix is not recognized.
Metadata contains a reference that cannot be resolved: 'net.tcp://localhost/WcfTcpService.TestTcpService'.
The message could not be dispatched because the service at the endpoint address 'net.tcp://localhost/WcfTcpService.TestTcpService' is unavailable for the protocol of the address.
If the service is defined in the current solution, try building the solution and adding the service reference again.
The net.tcp service is running, I receive the same error with WcfTestClient.exe. and I can succesfully run http://localhost/WcfTcpService/TestTcpService.svc.
I've searched google but nothing came up.
Thanks!
EDIT:
The bindings screen of the 'Default Web site' looks like this btw:

When you create service that uses netTcpBinding and you want to Add service reference in Visual Studio you should use http address (httpGetEnabled) not actual tcp address the service listens on. So the solution was to set localhost/WcfTcpService/TestTcpService.svc as an url in Add service reference dialog.

I had same problem and I changed web.config as below:
<serviceHostingEnvironment multipleSiteBindingsEnabled="true">
<baseAddressPrefixFilters>
<add prefix="net.tcp://YourBaseUrl"/>
</baseAddressPrefixFilters>
</serviceHostingEnvironment>

Service can't find endpoint of other service in WCF

I am trying to create two WCF services which should be able to access each other. However I am getting this error message:
The server encountered an error processing the request. The exception message is 'Could not find default endpoint element that references contract 'AddonWCFService.IService1' in the ServiceModel client configuration section. This might be because no configuration file was found for your application, or because no endpoint element matching this contract could be found in the client element.'.
I call the Test() Method from this service
namespace CustomersService
{
[ServiceContract]
public interface ICustomers
{
[OperationContract]
[WebGet]
string Test();
}
public class Customers : ICustomers
{
private int m_i = 0;
public int GetCounter()
{
return m_i;
}
public void Test()
{
AddonWCFService.Service1Client foo = new AddonWCFService.Service1Client();
}
}
}
The other service
namespace AddonWCFWebservice
{
[ServiceContract]
public interface IService1
{
[OperationContract]
void Init();
}
public class Service1 : IService1
{
public void Init()
{
}
}
}
My webconfig:
<?xml version="1.0"?>
<configuration>
<system.serviceModel>
<services>
<service behaviorConfiguration="MyserviceBehavior" name="CustomersService.Customers">
<endpoint name="ws" address="ws" binding="wsHttpBinding" contract="CustomersService.ICustomers"/>
<endpoint name=""
address=""
binding="webHttpBinding"
contract="CustomersService.ICustomers"
behaviorConfiguration="WebBehavior"/>
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
</service>
<service name="AddonWCFWebservice.Service1" behaviorConfiguration="MyserviceBehavior">
<endpoint address="" binding="wsHttpBinding" contract="AddonWCFWebservice.IService1"/>
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="MyserviceBehavior">
<serviceMetadata httpGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="true"/>
</behavior>
</serviceBehaviors>
<endpointBehaviors>
<behavior name="WebBehavior">
<webHttp />
</behavior>
</endpointBehaviors>
</behaviors>
</system.serviceModel>
<system.web>
<compilation debug="true"/>
<customErrors mode="Off"/>
</system.web>
</configuration>
Both services reside in the same active directory of IIS . I added the service reference to the VS C# projects using the web URL i.e. http://www.foobar.baz/Test/Service1.svc and http://www.foobar.baz/Test/Customers.svc
It's probably something obvious but I'm fairly new to the whole WCF business. Thanks!
Update: The solution was to add a client section to my webconfig. Also I used basicHttpBinding over wsHttpBinding because my security will be incorparated elsewhere because it is a public service. I had to match the binding of the client to the binding of the service section: both basicHttpBinding
<?xml version="1.0"?>
<configuration>
<system.serviceModel>
<client>
<endpoint
name=""
address="http://demo.mydomain.baz/TestService/Service1.svc"
binding="basicHttpBinding"
contract="AddonWCFService.IService1" />
</client>
<services>
<service behaviorConfiguration="MyserviceBehavior" name="CustomersService.Customers">
<endpoint name="ws" address="ws" binding="wsHttpBinding" contract="CustomersService.ICustomers"/>
<endpoint name=""
address=""
binding="webHttpBinding"
contract="CustomersService.ICustomers"
behaviorConfiguration="WebBehavior"/>
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
</service>
<service name="AddonWCFWebservice.Service1" behaviorConfiguration="MyserviceBehavior">
<endpoint address="" binding="basicHttpBinding" contract="AddonWCFWebservice.IService1"/>
<!--
<endpoint address=""
binding="webHttpBinding"
contract="AddonWCFWebservice.IService1"
behaviorConfiguration="WebBehavior"/>
-->
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="MyserviceBehavior">
<!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment -->
<serviceMetadata httpGetEnabled="true"/>
<!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information -->
<serviceDebug includeExceptionDetailInFaults="true"/>
</behavior>
</serviceBehaviors>
<endpointBehaviors>
<behavior name="WebBehavior">
<webHttp />
</behavior>
</endpointBehaviors>
</behaviors>
</system.serviceModel>
<system.web>
<compilation debug="true"/>
<customErrors mode="Off"/>
</system.web>
</configuration>

The problem with your config is that you have no client configurations. You have only server parts. You need to have client element with endpoints. Take a look here: http://msdn.microsoft.com/en-us/library/ms731745.aspx
If you are not so sure about you config skills I would advise you to open your config with SvcConfigEditor.exe. You will immediately see what's configured.
You can find it here: C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bin\SvcConfigEditor.exe.
If you will do it - you will see that there are no clients configured

I think you specified the wrong service contract in your config file.
This line here:
<endpoint address="" binding="wsHttpBinding" contract="AddonWCFWebservice.IService1"/>
specifies the contract as "AddonWCFWebservice.IService1" when it should be something like "AddonService.IService1" (without the "WCF").

WCF 4 Service with REST/SOAP endpoints in IIS 7.5

Hello and thank you for reading.
I'm trying to get a service hosted in IIS 7.5, that has multiple endpoints exposed.
I have a feeling the problem lies within my web.config, but I'll post my service code in here. There's no interface file, as I'm using the newer features of WCF 4, there's also no .svc file.
All the routing, from my understanding is handled in Global.asax.cs using the RouteTable feature.
Regardless, onto the code / config -
[ServiceContract]
[AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)]
[ServiceBehavior(InstanceContextMode = InstanceContextMode.PerCall)]
// NOTE: If the service is renamed, remember to update the global.asax.cs file
public class Service1
{
// TODO: Implement the collection resource that will contain the SampleItem instances
[WebGet(UriTemplate = "HelloWorld")]
public string HelloWorld()
{
// TODO: Replace the current implementation to return a collection of SampleItem instances
return "Hello World!";
}
}
And now, the config with the changes I thought would need to be made (I'm not sure if I needed to keep the standardEndpoints block, but with or without it I'm still getting error messages. -
<services>
<service name="AiSynthDocSvc.Service1" behaviorConfiguration="HttpGetMetadata">
<endpoint name="rest"
address=""
binding="webHttpBinding"
contract="AiSynthDocSvc.Service1"
behaviorConfiguration="REST" />
<endpoint name="soap"
address="soap"
binding="basicHttpBinding"
contract="AiSynthDocSvc.Service1" />
<endpoint name="mex"
address="mex"
binding="mexHttpBinding"
contract="IMetadataExchange" />
</service>
</services>
<behaviors>
<endpointBehaviors>
<behavior name="REST">
<webHttp/>
</behavior>
</endpointBehaviors>
<serviceBehaviors>
<behavior name="HttpGetMetadata">
<serviceMetadata httpGetEnabled="true" />
</behavior>
</serviceBehaviors>
</behaviors>
<standardEndpoints>
<webHttpEndpoint>
<!--
Configure the WCF REST service base address via the global.asax.cs file and the default endpoint
via the attributes on the <standardEndpoint> element below
-->
<standardEndpoint name="" helpEnabled="true" automaticFormatSelectionEnabled="true"/>
</webHttpEndpoint>
</standardEndpoints>
The Global.asax.cs file was left alone.
Again I'm pretty sure it has something to do with my config. The error I'm getting when I try to access any of the endpoints defined is -
The endpoint at '' does not have a Binding with the None MessageVersion. 'System.ServiceModel.Description.WebHttpBehavior' is only intended for use with WebHttpBinding or similar bindings.
Anyone have any ideas on this one?
Thanks,
Zachary Carter

OK, I tried to replicate your stuff - works like a charm for me :-)
I used your service class - no changes
I used your RegisterRoutes call in global.asax.cs
When I launch the web app from within Visual Studio, I get Cassini (the built-in web server) come up on http://localhost:3131/ - this might wary in your case.
Now, I can easily navigate there with a second browser window, and I do get a simple response on this URL:
http://localhost:3131/Service1/HelloWorld
+--------------------+
from Cassini
+--------+
name (first param) in ServiceRoute registration
+-----------+
from your URI template on the WebGet attribute
Does the same URL work for you??
Update: here's my config - I can connect to http://localhost:3131/Service1/HelloWorld in the browser using REST, and I can connect to http://localhost:3131/Service1/soap with the WCF Test Client to make a SOAP call (my Service1 lives in the RestWebApp namespace - thus my service and contract names are a tad different than yours - but other than that, I believe it's identical to your own config):
<system.serviceModel>
<serviceHostingEnvironment
aspNetCompatibilityEnabled="true" />
<services>
<service name="RestWebApp.Service1" behaviorConfiguration="Meta">
<endpoint name="rest"
address=""
binding="webHttpBinding"
contract="RestWebApp.Service1"
behaviorConfiguration="REST" />
<endpoint name="SOAP"
address="soap"
binding="basicHttpBinding"
contract="RestWebApp.Service1" />
<endpoint name="mex"
address="mex"
binding="mexHttpBinding"
contract="IMetadataExchange" />
</service>
</services>
<behaviors>
<endpointBehaviors>
<behavior name="REST">
<webHttp/>
</behavior>
</endpointBehaviors>
<serviceBehaviors>
<behavior name="Meta">
<serviceMetadata httpGetEnabled="true" />
</behavior>
</serviceBehaviors>
</behaviors>
<standardEndpoints>
<webHttpEndpoint>
<!--
Configure the WCF REST service base address via the global.asax.cs file and the default endpoint
via the attributes on the <standardEndpoint> element below
-->
<standardEndpoint name="" helpEnabled="true" automaticFormatSelectionEnabled="true"/>
</webHttpEndpoint>
</standardEndpoints>
</system.serviceModel>

Thanks for this it helped me a lot.
The issue in my case was that I had a default behaviour configured that contains webHttp. After giving it the name="REST" and setting my webHttpBinding endpoint behaviourConfiguration ="REST" I had no further errors.
<system.serviceModel>
<bindings>
<customBinding>
<binding name="CustomBinding_IMobileService">
<binaryMessageEncoding />
<httpTransport />
</binding>
</customBinding>
</bindings>
<client>
<endpoint address="http://localhost:6862/silverlight/services/MobileService.svc"
binding="customBinding" bindingConfiguration="CustomBinding_IMobileService"
contract="AlchemyMobileService.IMobileService" name="CustomBinding_IMobileService" />
</client>
<services>
<service name="MobileService.Alchemy">
<endpoint address="http://localhost:8732/mobileservice" binding="webHttpBinding" contract="MobileService.IAlchemy" behaviorConfiguration="REST">
</endpoint>
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior>
<serviceDebug includeExceptionDetailInFaults="True" />
</behavior>
</serviceBehaviors>
<endpointBehaviors>
<behavior name="REST">
<webHttp />
</behavior>
</endpointBehaviors>
</behaviors>