Is there a way to get the window handle (IntPtr) for a window after its launched from a C# app with Process.Start()?
If it's the main window you're after, Process.MainWindowHandle will give you what you need.
Use
process.MainWindowHandle;
It probably is 0 when launching the app, so you might want to loop and sleep until it is filled up.
This is not a recent topic but the answers are incomplete.
I agree with the Process.MainWindowHandle solution and to wait for the value but not with Sleep.
If you have just started a process and want to use its main window handle, consider using the WaitForInputIdle method to allow the process to finish starting, ensuring that the main window handle has been created.
Process.WaitForInputIdle
This overload applies only to processes with a user interface and, therefore, a message loop.
You could also call Refresh() on the process to be sure the info in accurate
Related
Is it possible for a running c# application to start/invoke some new arbitrary process, but only do so after the current running application is terminated?
I guess it's possible to call the new process from Process.Start() via cmd.exe and do something like sleep 3 & c:\mynewapplication.exe - this would giver the 'caller' some three seconds to terminate itself.
However this is a bit hacky, and was wondering if there was a neater way?
Depending on the type of application, you could simply listen to the end of the program. One option you have is the Application.ApplicationExit event.
Another possibility is to start another process, that waits until the first process dies. You could poll Process.GetProcesses for example. This will raise the event, even if the first process crashes. You could also register the Process.Exited event.
It has little to do with C#. It is a question about the Windows OS, and, in particular, in WinAPI.
Generally, the only 'thing' that runs code is threads. When your process in terminated, all its threads die.
Your best approach is probably by starting a process that will wait before starting your new process, as you suggested, however you may, for example, hook on some of the functions called when something happens and start your new process there.
I have a program which does some copy jobs (via File.Copy) that could last a few minutes. When the user brings another window to foreground in this time the program window gets blank since it doesn't redraw itself.
Now I want to show a ProgressBar in an extra window in the center of the screen, but that window get's blank too.
So I startet it in another thread which didn't help.
I'm quite sure someone did this before but I cannot find a working example. Any Ideas?
There is nice example in the documentation on BackgroundWorker class.
ChrisF is correct. Your long operation should be done in a BackgroundWorker thread. You can use BackgroundWorker to report progress, and hook that up to a progress bar on your form.
You need to thread your operation using a BackgroundWorker. There are other ways to thread the operation, but this one is probably the simplest, and will continue to perform message pumping in the foreground so Windows doesn't think your application has stopped responding.
Another option would be to use a Thread, and use Thread.Join to wait for the background task to complete, since Thread.Join also sends standard message pump information to Windows while it waits.
You can use BackgroundWorker class.
See this answer.
I have a c# application which I want to instruct to shutdown nicely, from a different process.
I also want to be able to ask it to open its main window.
I have a reference to its main window handle.
I know I can do it using elaborate schemes such as remoting or WCF.
the question is can I do it using simpler mechanisms such as window messages, or the OnClose event handlers of the window in the c# application
Pinvoke SendMessage() to send the WM_CLOSE message to the app's main window. Asking it to open its main window is probably going to be quite difficult, you cannot obtain the window handle until the window is created. Process.Start() would be the normal way.
A low cost alternative to WCF and superior to pinvoke is a named pipe or a socket to interface with the app. This requires being able to modify the source code of the app.
Process.CloseMainWindow
http://msdn.microsoft.com/en-us/library/system.diagnostics.process.closemainwindow.aspx
I think that you could probably use FindWindow to find the correct child window and then SendMessage or PostMessage to send a WM_CLOSE.
Here's another StackOverflow question that deals with doing this in C#.
Edit: Though as the other answer says in that question, you might be able to use Process.CloseMainWindow instead.
I would first make my target application "aware" of the fact that some other process might like to trigger its closing or opening of a window or doing any action. This should be implemented similar to calling any method on another process through the target app's api or public methods. ..unless you are trying to do something with 3rd party applications, I think you shouldn't attempt to directly send them messages to close or shutdown.
Right now I am using Process.Kill() to kill a process. Is there a way though, instead of just killing it immediately, that I can like send a message to the process instructing it to close so that it can gracefully clean up and shut down. Basically, I'm looking for the equivlent to just clicking the red X in the upper right hand corner, which I believe DOES send a message to the application requesting a shut down.
If the process has a windows interface (as you refer to the red "X"), you can try Process.CloseMainWindow(). If it fails, you can fallback to Process.Kill().
Killing can not be graceful, perhaps you can signal the process to commit suicide.
For signaling you have many options.
SendMessage
NamedPipes
Named Mutex
Sockets
It would depend on the process you're killing. As stated at on the relevant page for Process.Kill, "Kill is the only way to terminate processes that do not have graphical interfaces." If there is a graphical window, then go with the answer by lc above; Process.CloseMainWindow functions as the red X you referred to.
I have a windows form application which needs to be the TopMost. I've set my form to be the TopMost and my application works as I'd like it to except for in one case.
There is a 3rd party application (referred to as player.exe) that displays SWF movie files on a portion of the screen that popup on top of my application.
Using Process Monitor I determined that player.exe application calls
flash.exe <PositionX> <PositionY> <Width> <Height> <MovieFile>
in my case:
flash.exe 901 96 379 261 somemovie.swf
Since flash.exe is being spawned in a new process after my form has been set to the TopMost it is appearing on top of my application.
First thing I did was make my application minimize the player.exe main application window hoping that this would prevent the Flash from appearing also. But, unfortunately it doesn't... even with the window minimized whenever the flash movie starts it shows up at the pixel location (901,96). I then tried creating a timer to keep setting the form.TopMost property to true every 10ms. This sort of works but you still see a very quick blip of the swf file.
Is there some type of Windows API call which can be used to temporarily prevent player.exe from spawning child processes which are visible? I admit it sounds a little far fetched. But, curious if anyone else has had a similar problem.
Addendum:
This addendum is to provide a reply to some of the suggestions layed out in Mathew's post below.
For the emergency situation described in the comments, I would look at possible solutions along these lines:
1) How does the third party application normally get started and
stopped? Am I permitted to close it
the same way? If it is a service, the
Service Control Manager can stop it.
If it is a regular application,
sending an escape keystroke (with
SendInput() perhaps) or WM_CLOSE
message to its main window may work.
Easiest way to close the app is to CTRL-ALT-DEL, then kill process. -OR-
The proper way is to Hold ESC while clicking the left mouse button... then input your username and password, navigate some menu's to stop the player.
There is no PAUSE command... believe it or not.
I don't think using WM_CLOSE will help since minimizing the application doesn't. Would that kill the process also? If not, how do you reopen it.
2) If I can't close it nicely, am I permitted to kill it? If so,
TerminateProcess() should work.
I can't kill the process for two reasons. 1) Upon relaunch you need to supply username/password credentials... There may be a way to get around this since it doesn't prompt when the machine is rebooted but... 2) Whenever I kill the process in task manager it doesn't die gracefully and asks if you want to send an error report.
3) If I absolutely have to leave the other process running, I would try
to see if I can programmatically
invoke fast user switching to take me
to a different session (in which there
will be no competing topmost windows).
I don't know where in the API to start
with this one. (Peter Ruderman
suggests SwitchDesktop() for this
purpose in his answer.)
I got really excited by this idea... I found this article on CodeProject which provides a lot of the API Wrapper methods. I stopped implementing it because I think that in order for desktop's to work you must have explorer.exe running (which I do not).
EDIT2: On second thought... maybe explorer.exe isn't needed. I'll give it a try and report back.
Edit3: Was unable to get the code in that article working. Will have to put this on hold for a moment.
Answer Summary
As one might have expected, there is no simple answer to this problem. The best solution would be to problematically switch to a different desktop when you need to guarantee nothing will appear over it. I was unable to find a simple C# implementation of desktop switching that worked and I had a looming doubt that I would just be opening a whole new set of worms once it was implemented. Therefore, I decided not to implement the desktop switching. I did find a C++ Implementation that works well. Please post working C# virtual desktop implementations for others.
Setting the TopMost property (or adding the WS_EX_TOPMOST style to a window) does not make it unique in the system. Any number of topmost windows may be created by any number of applications; the only guarantee is that all topmost windows will be drawn 'above' all non-topmost windows. If there are two or more topmost windows, the Z-order still applies. From your description, I suspect that flash.exe is also creating a topmost window.
Aside from periodically forcing your window to the top of the Z-order, I think there is little you can do. Be warned, however, that this approach is dangerous: if two or more windows are simultaneously trying to force themselves to the top of the Z-order, the result will be a flickering mess that the user will likely have to use the task manager to escape.
I recommend that your program not attempt to meddle with other processes on the computer (unless that is its explicit purpose, e.g. a task manager clone). The computer belongs to the user, and he may not value your program more highly than all others.
Addendum:
For the emergency situation described in the comments, I would look at possible solutions along these lines:
How does the third party application normally get started and stopped? Am I permitted to close it the same way? If it is a service, the Service Control Manager can stop it. If it is a regular application, sending an escape keystroke (with SendInput() perhaps) or WM_CLOSE message to its main window may work.
If I can't close it nicely, am I permitted to kill it? If so, TerminateProcess() should work.
If I absolutely have to leave the other process running, I would try to see if I can programmatically invoke fast user switching to take me to a different session (in which there will be no competing topmost windows). I don't know where in the API to start with this one. (Peter Ruderman suggests SwitchDesktop() for this purpose in his answer.)
You can use the Process class to start flash.exe directly - and use an appropriate ProcessStartInfo settings to show the window in a hidden state - or with a WindowStyle of hidden or minimized.
You could also consider using the SetWindowsHookEx API to intercept the process start API calls, and when the process is flash.exe run some code to restore you window to top-most status.
Matthew's answer is excellent, but I suspect you may be asking the wrong question. Why does your application need to be topmost? If you're trying to create a kiosk or some such, then topmost is not the way to go.
Edit: After reading your response to Matthew's comment, I'd suggest creating a new desktop and switching to it before displaying your alert. (See CreateDesktop and SwitchDesktop in MSDN.)