How do you 'verify' that a message sent using MSMQ to a private local queue was actually delivered? I'm especially thinking of a scenario where the listener (a C# service in my case) is not running and therefore delivery can't be successful.
You can only guarantee that it can get to the queue without taking extra steps. To deal with the "not running receiver" scenario, you would need to code the receiver to send a message back to the server when it processes the message. The original sender would be responsible for tracking the sent messages and verifying that the client has recieved them.
That's one of the decisions you should be taking when deciding whether or not to use MSMQ as opposed to a remoting or a web service scenario. For example, we had a project used for notifying all of our retail locations when an emergency occurred (such as a product recall/food safety issue.) We needed to know immediately if the store's listener was running so we chose remoting, and when the sender received an error indicating one of the listeners was not listenting, we would need to pick up the phone and call.
Just something to keep in mind.
Edit - clarification
I was really giving out two options above.
Code the client to send a message back to the sender when it receives a message.
Use another option, such as remoting, where you can detect if the client is running and receives the message.
It's always sent to the queue.
If your service isn't running to receive it, it just sits there, waiting patiently, until someone receives it.
You know it's been sent to the queue because .Send() returns without crashing.
You can probably pull this info out using administrative queues
When you send a message you can specify the AcknowledgeType which will allow you find out (through positive or negative acknowledgement) whether the message reached the queue and/or was received from the queue. Acknowledgements are sent as messages, by MSMQ, to the AdministrativeQueue so make sure you assign that property on the Message object.
You can check the administrative queue for acknowledgements by correlation ID which is ID of the original message.
Related
I have two machines A and B,A is used for sending message while B is used for receiving message.
Now,i power off B so the message sent out by A is store in outgoing queue.My question is:
1.As a developer,how can i know the message has reach B?(when B is not available,the application that send the message exit as usual,no exceptions were thrown)
2.How to resend the message in outgoing queue when B is start?
Theoretically speaking, MSMQ is a technology for sending messages into an asynchronous manner and more importantly, into a disconnected fashion (the receiver maybe is NOT connected to the system yet).
The sender, if he doesn't receive a MessageQueueException (https://msdn.microsoft.com/en-us/library/system.messaging.messagequeueexception(v=vs.110).aspx) then he can consider that the message is sent successfully. If you really want to see in "real time" whether B received a message from A or not, you should rely on other communication technologies (direct TCP connection or something that wraps a TCP communication channel, such as .NET Remoting or WCF).
As I said, B maybe is not online yet or has been shut down for no matter what reasons ... So for your second question, I can tell you that you don't have any problems because whenever B restarts, it should call again "Receive" on your queue (to dequeue any message sent by A).
Read the following link: http://www.primaryobjects.com/2007/08/13/using-the-microsoft-message-queue-msmq-and-c-asp-net/ I think it is helpfull.
"As a developer, how can I know the message has reach B?"
Journaling is what you need.
Writing in MSMQ's personal journal
"How to resend the message in outgoing queue when B is start?"
Delivery of messages in outgoing queues is looked after by MSMQ. You don't need to resend. Just wait for the destination to come online.
I'm using RabbitMQ for the following scenario. When a user uses a premium search feature, I send a message via RabbitMQ to one of a few server instances. They run the same routine (DB queries and billing). I want to make sure I don't process the same message more than once.
I've come across this great tutorial but the exchange type presented in it is "Topic", which does not work for me, because I process the same message more than once.
How can I implement the request-response pattern with worker queues in RabbitMQ so that each message is handled only once and there's load balancing?
Anton Gogolev's comment above is correct. You cannot guarantee a message will be processed only once, for many reasons. But, this is often a requirement of systems - to only produce the desired result once.
The way to do that is through idempotence - the idea that no matter how many times a given message is processed, it will only make the desired change once.
There are a lot of ways to do this. One simple example is to use a shared database that tracks which messages have been processed. When you receive a message, you check to see if it has been processed already. If not, you process it. If it has, you just ignore it and move on.
In your case, if you are doing request/response and want load balancing, you probably want multiple consumers on the same queue. You could have 2 or 10 or 300 instances of your request handler listening to the same queue, and you won't have too much worry about duplicate processing.
RabbitMQ will send a given message to a single consumer. It will wait for that consumer to say it is done processing, or if the consumer crashes or rejects the message, it will requeue the message for another consumer to try again.
In this way, you will generally have only 1 request handler per request. But it will always be possible for more than one to handle the same message, which is why idempotence is important.
Regarding the use of a topic exchange vs any other type of exchange - it doesn't make much difference. There will always be the possibility of more than one queue receiving the message that you are sending, because you can have multiple queues bound to the same exchange with the same binding keys.
I'm working on a task where I'm trying to insure delivery of data to a database in the order in which it is written. The database will be located on another machine, and it's possible that the database machine could fail while the sending computer continues to queue up database messages.
I'm trying to use WCF for this task and from my initial reading believed that this might be possible using WCF with message queue and a ReceiveContext enabled channel. The documentation states that ReceiveContext 'enables an application to decide whether to access the message or leave it in the queue for further processing.'
The problem that I've encountered is that if I call the Abandon method indicating that the message has not been successful processed and should be left on the queue, WCF appears to place the message at the back of the queue instead of leaving it at the front of the queue. Since I need to write the messages to the database in the order they were originally sent this solution will not work.
Is there any way to force WCF to 'peek' at a message before removing it or cause an abandon message to be placed at the front of the queue? If not could anyone suggest a method of accomplishing what I'm attempting to do without having to write a lot of code from scratch.
Thanks,
Al
I need to implement a queuing mechanism for WCF service requests. The service will be called by clients in a one-way manner. These request messages should be stored in a SQL Server database and a Windows Service queues the messages. The time at which the requests are processed will be configurable. If there happens error in processing the message, it need to be retried up to 100 times and if still fails it need to be terminated.
Also there should be a mechanism to monitor the number of transaction made on a day and number of failures.
QUESTIONS
If I were using MSMQ, clients could have forwarded the message to queue without knowing the service endpoint. But I am using SQL Server to store the request messages. How the clients can put the requests to SQL Server?
Is the solution feasible? Do we have any article/book that explains how to implement the above?
What are the steps to prevent service and client reaching faulted state in this scenario?
What is the best method to store incoming message to database?
What is the best method to implement retry mechanism? Anything already exist so that I don't have to reinvent the wheel?
Is there any book/article that explains this implementation?
NOTES
Content of the message will be complex XML. For example Travel expense items of an employee or a list of employees.
READING
Logging WCF Request to Database
Guaranteed processing of data in WCF service
MSMQ vs. SQL Server Service Broker
Is it possible to persist and then forward WCF messages to destination services?
WCF 4 Routing Service - protocol bridging issue
https://softwareengineering.stackexchange.com/questions/134605/designing-a-scalable-and-robust-retry-mechanism
Integrating SQL Service Broker and NServiceBus
Can a subscriber also publish/send message in NServiceBus?
I'm a DBA, so that flavors my my response, but here's what I'd do:
If you're using SQL 2005+, use Service Broker to store the messages
in the database rather than storing them in a table. You get a
queueing mechanism with this, so you can get rid of MSMQ. You'll also have a table, but it's just going to store the conversation handle (essentially, a pointer to the message) along with how many times it attempted this message. Lastly, you'll want some sort of a "dead letter box" where messages that reach your retry threshold go.
In your message processing code, do the following:
Begin a transaction
Receive a message off of the queue
If the retry count is greater than the threshold, move it to the dead letter box and commit
Increment the counter on the table for this message
Process the message
If the processing succeeded, commit the transaction
If the processing failed, put a new message on the queue with the same contents and then commit the transaction
Notice that there aren't any planned rollbacks. Rollbacks in Service Broker can be bad; if you rollback 5 times without a successful receive, the queue will become disabled for both enqueuing and dequeuing. But you still want to have transactions for the case when your message processor dies in the middle of processing (i.e. the server crashes).
1. If I were using MSMQ, clients could have forwarded the message to queue without knowing the service endpoint.
Yes - but they would need to know the MSMQ endpoint in order to send their message to the queue.....
But I am using SQL Server to store the request messages. How the clients can put the requests to SQL Server?
The clients won't put their requests into SQL Server - that's what the service on the server will do. The client just call a service method, and the code in there will store the request into the SQL Server table.
2. Is the solution feasible? Do we have any article/book that explains how to implement the above?
Sure, I don't see any big issue. The only point unclear to me right now is: how will the clients know their results?? Do they need to go get results from another service or something??
3. What are the steps to prevent service and client reaching faulted state in this scenario?
As always - just make sure your service code catches all exceptions and either handles them internally, or returns interoperable SOAP faults instead of .NET exceptions.
It sounds like what you want to do is similar to this:
In this case you can use netMsmqBinding between your service and your service consumers.
The only thing you won't get out of the box is the retrying. However if you make the queue transactional then this functionality can be implemented in your service code.
If there is a failure in your dequeue operation the message will not be removed from the queue. It will therefore be available for further dequeue attempts.
However, you would need to implement retry attempt threshold code which fails a message after a certain number of attempts.
I would suggest a different approach to the ones suggested here. If you are able to, I would consider the introduction of a messaging framework such as NServiceBus. It satifies many of the requirements that you have right out of the box. Let me try and address this in context of your requirements.
The service will be called by clients in a one-way manner.
All communication between endpoints in NServiceBus is one way. The underlying transport NServiceBus uses is MSMQ, so much like your WCF approach, your client is communicating with queues, rather than specific service endpoints.
These request messages should be stored in a SQL Server database and a Windows Service queues the messages.
If you wanted to store your request messages in a database then you can configure NServiceBus to forward all messages sent to your request processing endpoint to another "audit" queue, which you can use to persist to the database. This has the added benefit of separating your application logic from your auditing implementation.
The time at which the requests are processed will be configurable.
NServiceBus allows you to defer when a mesage is sent. Normally a message is sent via the Send method of a Bus instance - Bus.Send(msg). You can use The Defer method to send the message some time in the future eg. Bus.Defer(DateTime.Now.AddDays(1), msg); There's nothing more you really have to do, NserviceBus will handle the message once the specified time has been reached.
If there happens error in processing the message, it need to be retried up to 100 times and if still fails it need to be terminated.
By default, NServiceBus will enlist your message in a transaction as soon as your message leaves the queue. This ensures that in the event of failure that the message is rolled back to the originating queue. In such an event, NServiceBus will automatically try to reprocess the message a configurable number of times. The default being 5. You can of course set this to whatever you want, although I am not sure why you would want to set this to 100. At any rate, NServiceBus uses this setting to stop an endless loop of automatic retries. Once the limit has been reached the message is sent to an error queue where it sits until you fix whatever issues caused the exception or until you decide to push the message back to the queue for processing. Either way, you are assured that the message is never lost.
Also there should be a mechanism to monitor the number of transaction made on a day and number of failures.
The beauty of using MSMQ as the transport is that performance monitoring can be a achieved at a infrastructure level. How your applications perform, can be measured by how long they sit in the queue. NServiceBus comes with performance monitors that track the length of time a message is in the queue and you can also add perf mons that come built into windows to track other activity. To monitor errors, all you need to do is check the number of messages in the error queue.
One of the main features of NServiceBus is reliability. WCF will only do so much for you, and then you are on your own. That's a lot of code, complexity and frankly hugely error prone. The things I have described here are all standard features of NServiceBus and I have barely scratched the surface with all the other things that you can do with it. I recommend you check it out.
I have the need from an asp.net web site to send out many SMS messages at once, and also poll a POP3 account for an incoming mail, and then SMS that out to many recipients, one at a time.
The way I am thinking of doing this is a windows service that would connect to my sql back-end to see if there are SMS messages to be sent out, like every 10-20 seconds or so. If so, get all the messages in a list, delete them from the table, and then proceed to send them out.
Same way with the pop account.
Any ideas on how to best provide this service without causing blocking in the asp.net web page when it is kicked off (e.g. messages added to sql server)?
Platform is windows server 2003 R2, sql 2008 standard, asp.net 3.5 SP1.
Thanks for your advice.
We have implemented similar scenarios using SQL Server service broker's Queueing mechanism. The idea is that every inserted SMS record is caught by a trigger which inserts a message containing the SmsID into the service broker Queue.
You then need a stored procedure which receives messages from the Queue. If there are no messages, your procedure will run until the next entry is inserted. That's OK, since it does not take up resources to listen to the Queue.
Next you'll need a Windows service who continuously (recursively) calls the STP, assembles the SMS and sends it.
The Advantage of the Service Broker Queue over a flag in a table is thread safety. This way you could have as many instances of your Service as you want w/o having to worry too much about concurrency issues.
You can find a nice Service Broker tutoial here: http://www.developer.com/db/article.php/3640771
Instead of using an Sql Server for the queuing you could use MSMQ (Microsoft Message Queuing) for this.
MSMQ is quite easy to set up and once it is up and running it is more scalable than Sql Server.
So what you could do was to setup a new queue in MSMQ that would receive the messages you wanted to send. The message would normally be some sort of Message object that describe the message, the sender and the recipient.
Then you would either setup a service that would poll the queue at a regular interval or you could setup MSMQ to start a class of your choice each time a new Message was sent to the queue.
If you need a log of the messages you could have the service / sender object write to a log in sql server when the message was sent.