How to pass an array into a SQL Server stored procedure?
For example, I have a list of employees. I want to use this list as a table and join it with another table. But the list of employees should be passed as parameter from C#.
SQL Server 2016 (or newer)
You can pass in a delimited list or JSON and use STRING_SPLIT() or OPENJSON().
STRING_SPLIT():
CREATE PROCEDURE dbo.DoSomethingWithEmployees
#List varchar(max)
AS
BEGIN
SET NOCOUNT ON;
SELECT value FROM STRING_SPLIT(#List, ',');
END
GO
EXEC dbo.DoSomethingWithEmployees #List = '1,2,3';
OPENJSON():
CREATE PROCEDURE dbo.DoSomethingWithEmployees
#List varchar(max)
AS
BEGIN
SET NOCOUNT ON;
SELECT value FROM OPENJSON(CONCAT('["',
REPLACE(STRING_ESCAPE(#List, 'JSON'),
',', '","'), '"]')) AS j;
END
GO
EXEC dbo.DoSomethingWithEmployees #List = '1,2,3';
I wrote more about this here:
Handling an unknown number of parameters in SQL Server
Ordered String Splitting in SQL Server with OPENJSON
SQL Server 2008 (or newer)
First, in your database, create the following two objects:
CREATE TYPE dbo.IDList
AS TABLE
(
ID INT
);
GO
CREATE PROCEDURE dbo.DoSomethingWithEmployees
#List AS dbo.IDList READONLY
AS
BEGIN
SET NOCOUNT ON;
SELECT ID FROM #List;
END
GO
Now in your C# code:
// Obtain your list of ids to send, this is just an example call to a helper utility function
int[] employeeIds = GetEmployeeIds();
DataTable tvp = new DataTable();
tvp.Columns.Add(new DataColumn("ID", typeof(int)));
// populate DataTable from your List here
foreach(var id in employeeIds)
tvp.Rows.Add(id);
using (conn)
{
SqlCommand cmd = new SqlCommand("dbo.DoSomethingWithEmployees", conn);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter tvparam = cmd.Parameters.AddWithValue("#List", tvp);
// these next lines are important to map the C# DataTable object to the correct SQL User Defined Type
tvparam.SqlDbType = SqlDbType.Structured;
tvparam.TypeName = "dbo.IDList";
// execute query, consume results, etc. here
}
SQL Server 2005
If you are using SQL Server 2005, I would still recommend a split function over XML. First, create a function:
CREATE FUNCTION dbo.SplitInts
(
#List VARCHAR(MAX),
#Delimiter VARCHAR(255)
)
RETURNS TABLE
AS
RETURN ( SELECT Item = CONVERT(INT, Item) FROM
( SELECT Item = x.i.value('(./text())[1]', 'varchar(max)')
FROM ( SELECT [XML] = CONVERT(XML, '<i>'
+ REPLACE(#List, #Delimiter, '</i><i>') + '</i>').query('.')
) AS a CROSS APPLY [XML].nodes('i') AS x(i) ) AS y
WHERE Item IS NOT NULL
);
GO
Now your stored procedure can just be:
CREATE PROCEDURE dbo.DoSomethingWithEmployees
#List VARCHAR(MAX)
AS
BEGIN
SET NOCOUNT ON;
SELECT EmployeeID = Item FROM dbo.SplitInts(#List, ',');
END
GO
And in your C# code you just have to pass the list as '1,2,3,12'...
I find the method of passing through table valued parameters simplifies the maintainability of a solution that uses it and often has increased performance compared to other implementations including XML and string splitting.
The inputs are clearly defined (no one has to guess if the delimiter is a comma or a semi-colon) and we do not have dependencies on other processing functions that are not obvious without inspecting the code for the stored procedure.
Compared to solutions involving user defined XML schema instead of UDTs, this involves a similar number of steps but in my experience is far simpler code to manage, maintain and read.
In many solutions you may only need one or a few of these UDTs (User defined Types) that you re-use for many stored procedures. As with this example, the common requirement is to pass through a list of ID pointers, the function name describes what context those Ids should represent, the type name should be generic.
Based on my experience, by creating a delimited expression from the employeeIDs, there is a tricky and nice solution for this problem. You should only create an string expression like ';123;434;365;' in-which 123, 434 and 365 are some employeeIDs. By calling the below procedure and passing this expression to it, you can fetch your desired records. Easily you can join the "another table" into this query. This solution is suitable in all versions of SQL server. Also, in comparison with using table variable or temp table, it is very faster and optimized solution.
CREATE PROCEDURE dbo.DoSomethingOnSomeEmployees #List AS varchar(max)
AS
BEGIN
SELECT EmployeeID
FROM EmployeesTable
-- inner join AnotherTable on ...
where #List like '%;'+cast(employeeID as varchar(20))+';%'
END
GO
Use a table-valued parameter for your stored procedure.
When you pass it in from C# you'll add the parameter with the data type of SqlDb.Structured.
See here: http://msdn.microsoft.com/en-us/library/bb675163.aspx
Example:
// Assumes connection is an open SqlConnection object.
using (connection)
{
// Create a DataTable with the modified rows.
DataTable addedCategories =
CategoriesDataTable.GetChanges(DataRowState.Added);
// Configure the SqlCommand and SqlParameter.
SqlCommand insertCommand = new SqlCommand(
"usp_InsertCategories", connection);
insertCommand.CommandType = CommandType.StoredProcedure;
SqlParameter tvpParam = insertCommand.Parameters.AddWithValue(
"#tvpNewCategories", addedCategories);
tvpParam.SqlDbType = SqlDbType.Structured;
// Execute the command.
insertCommand.ExecuteNonQuery();
}
You need to pass it as an XML parameter.
Edit: quick code from my project to give you an idea:
CREATE PROCEDURE [dbo].[GetArrivalsReport]
#DateTimeFrom AS DATETIME,
#DateTimeTo AS DATETIME,
#HostIds AS XML(xsdArrayOfULong)
AS
BEGIN
DECLARE #hosts TABLE (HostId BIGINT)
INSERT INTO #hosts
SELECT arrayOfUlong.HostId.value('.','bigint') data
FROM #HostIds.nodes('/arrayOfUlong/u') as arrayOfUlong(HostId)
Then you can use the temp table to join with your tables.
We defined arrayOfUlong as a built in XML schema to maintain data integrity, but you don't have to do that. I'd recommend using it so here's a quick code for to make sure you always get an XML with longs.
IF NOT EXISTS (SELECT * FROM sys.xml_schema_collections WHERE name = 'xsdArrayOfULong')
BEGIN
CREATE XML SCHEMA COLLECTION [dbo].[xsdArrayOfULong]
AS N'<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="arrayOfUlong">
<xs:complexType>
<xs:sequence>
<xs:element maxOccurs="unbounded"
name="u"
type="xs:unsignedLong" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>';
END
GO
Context is always important, such as the size and complexity of the array. For small to mid-size lists, several of the answers posted here are just fine, though some clarifications should be made:
For splitting a delimited list, a SQLCLR-based splitter is the fastest. There are numerous examples around if you want to write your own, or you can just download the free SQL# library of CLR functions (which I wrote, but the String_Split function, and many others, are completely free).
Splitting XML-based arrays can be fast, but you need to use attribute-based XML, not element-based XML (which is the only type shown in the answers here, though #AaronBertrand's XML example is the best as his code is using the text() XML function. For more info (i.e. performance analysis) on using XML to split lists, check out "Using XML to pass lists as parameters in SQL Server" by Phil Factor.
Using TVPs is great (assuming you are using at least SQL Server 2008, or newer) as the data is streamed to the proc and shows up pre-parsed and strongly-typed as a table variable. HOWEVER, in most cases, storing all of the data in DataTable means duplicating the data in memory as it is copied from the original collection. Hence using the DataTable method of passing in TVPs does not work well for larger sets of data (i.e. does not scale well).
XML, unlike simple delimited lists of Ints or Strings, can handle more than one-dimensional arrays, just like TVPs. But also just like the DataTable TVP method, XML does not scale well as it more than doubles the datasize in memory as it needs to additionally account for the overhead of the XML document.
With all of that said, IF the data you are using is large or is not very large yet but consistently growing, then the IEnumerable TVP method is the best choice as it streams the data to SQL Server (like the DataTable method), BUT doesn't require any duplication of the collection in memory (unlike any of the other methods). I posted an example of the SQL and C# code in this answer:
Pass Dictionary to Stored Procedure T-SQL
As others have noted above, one way to do this is to convert your array to a string and then split the string inside SQL Server.
As of SQL Server 2016, there's a built-in way to split strings called
STRING_SPLIT()
It returns a set of rows that you can insert into your temp table (or real table).
DECLARE #str varchar(200)
SET #str = "123;456;789;246;22;33;44;55;66"
SELECT value FROM STRING_SPLIT(#str, ';')
would yield:
value
-----
123
456
789
246
22
33
44
55
66
If you want to get fancier:
DECLARE #tt TABLE (
thenumber int
)
DECLARE #str varchar(200)
SET #str = "123;456;789;246;22;33;44;55;66"
INSERT INTO #tt
SELECT value FROM STRING_SPLIT(#str, ';')
SELECT * FROM #tt
ORDER BY thenumber
would give you the same results as above (except the column name is "thenumber"), but sorted. You can use the table variable like any other table, so you can easily join it with other tables in the DB if you want.
Note that your SQL Server install has to be at compatibility level 130 or higher in order for the STRING_SPLIT() function to be recognized. You can check your compatibility level with the following query:
SELECT compatibility_level
FROM sys.databases WHERE name = 'yourdatabasename';
Most languages (including C#) have a "join" function you can use to create a string from an array.
int[] myarray = {22, 33, 44};
string sqlparam = string.Join(";", myarray);
Then you pass sqlparam as your parameter to the stored procedure above.
This will help you. :) Follow the next steps,
Open the Query Editor
Copy Paste the following code as it is, it will create the Function which converts the String to Int
CREATE FUNCTION dbo.SplitInts
(
#List VARCHAR(MAX),
#Delimiter VARCHAR(255)
)
RETURNS TABLE
AS
RETURN ( SELECT Item = CONVERT(INT, Item) FROM
( SELECT Item = x.i.value('(./text())[1]', 'varchar(max)')
FROM ( SELECT [XML] = CONVERT(XML, '<i>'
+ REPLACE(#List, #Delimiter, '</i><i>') + '</i>').query('.')
) AS a CROSS APPLY [XML].nodes('i') AS x(i) ) AS y
WHERE Item IS NOT NULL
);
GO
Create the Following stored procedure
CREATE PROCEDURE dbo.sp_DeleteMultipleId
#List VARCHAR(MAX)
AS
BEGIN
SET NOCOUNT ON;
DELETE FROM TableName WHERE Id IN( SELECT Id = Item FROM dbo.SplitInts(#List, ','));
END
GO
Execute this SP Using exec sp_DeleteId '1,2,3,12' this is a string of Id's which you want to delete,
You can convert your array to string in C# and pass it as a Stored Procedure parameter as below,
int[] intarray = { 1, 2, 3, 4, 5 };
string[] result = intarray.Select(x=>x.ToString()).ToArray();
SqlCommand command = new SqlCommand();
command.Connection = connection;
command.CommandText = "sp_DeleteMultipleId";
command.CommandType = CommandType.StoredProcedure;
command.Parameters.Add("#Id",SqlDbType.VARCHAR).Value=result ;
This will delete multiple rows in a single stored proc call. All the best.
There is no support for array in sql server but there are several ways by which you can pass collection to a stored proc .
By using datatable
By using XML.Try converting your collection in an xml format and then pass it as an input to a stored procedure
The below link may help you
passing collection to a stored procedure
Starting in SQL Server 2016 you can bring the list in as an NVARCHAR() and use OPENJSON
DECLARE #EmployeeList nvarchar(500) = '[1,2,15]'
SELECT *
FROM Employees
WHERE ID IN (SELECT VALUE FROM OPENJSON(#EmployeeList ))
I've been searching through all the examples and answers of how to pass any array to sql server without the hassle of creating new Table type,till i found this linK, below is how I applied it to my project:
--The following code is going to get an Array as Parameter and insert the values of that
--array into another table
Create Procedure Proc1
#UserId int, //just an Id param
#s nvarchar(max) //this is the array your going to pass from C# code to your Sproc
AS
declare #xml xml
set #xml = N'<root><r>' + replace(#s,',','</r><r>') + '</r></root>'
Insert into UserRole (UserID,RoleID)
select
#UserId [UserId], t.value('.','varchar(max)') as [RoleId]
from #xml.nodes('//root/r') as a(t)
END
Hope you enjoy it
Starting in SQL Server 2016 you can simply use split string
Example:
WHERE (#LocationId IS NULL OR Id IN (SELECT items from Split_String(#LocationId, ',')))
CREATE TYPE dumyTable
AS TABLE
(
RateCodeId int,
RateLowerRange int,
RateHigherRange int,
RateRangeValue int
);
GO
CREATE PROCEDURE spInsertRateRanges
#dt AS dumyTable READONLY
AS
BEGIN
SET NOCOUNT ON;
INSERT tblRateCodeRange(RateCodeId,RateLowerRange,RateHigherRange,RateRangeValue)
SELECT *
FROM #dt
END
It took me a long time to figure this out, so in case anyone needs it...
This is based on the SQL 2005 method in Aaron's answer, and using his SplitInts function (I just removed the delim param since I'll always use commas). I'm using SQL 2008 but I wanted something that works with typed datasets (XSD, TableAdapters) and I know string params work with those.
I was trying to get his function to work in a "where in (1,2,3)" type clause, and having no luck the straight-forward way. So I created a temp table first, and then did an inner join instead of the "where in". Here is my example usage, in my case I wanted to get a list of recipes that don't contain certain ingredients:
CREATE PROCEDURE dbo.SOExample1
(
#excludeIngredientsString varchar(MAX) = ''
)
AS
/* Convert string to table of ints */
DECLARE #excludeIngredients TABLE (ID int)
insert into #excludeIngredients
select ID = Item from dbo.SplitInts(#excludeIngredientsString)
/* Select recipies that don't contain any ingredients in our excluded table */
SELECT r.Name, r.Slug
FROM Recipes AS r LEFT OUTER JOIN
RecipeIngredients as ri inner join
#excludeIngredients as ei on ri.IngredientID = ei.ID
ON r.ID = ri.RecipeID
WHERE (ri.RecipeID IS NULL)
How do I parameterize a query containing an IN clause with a variable number of arguments, like this one?
SELECT * FROM Tags
WHERE Name IN ('ruby','rails','scruffy','rubyonrails')
ORDER BY Count DESC
In this query, the number of arguments could be anywhere from 1 to 5.
I would prefer not to use a dedicated stored procedure for this (or XML), but if there is some elegant way specific to SQL Server 2008, I am open to that.
You can parameterize each value, so something like:
string[] tags = new string[] { "ruby", "rails", "scruffy", "rubyonrails" };
string cmdText = "SELECT * FROM Tags WHERE Name IN ({0})";
string[] paramNames = tags.Select(
(s, i) => "#tag" + i.ToString()
).ToArray();
string inClause = string.Join(", ", paramNames);
using (SqlCommand cmd = new SqlCommand(string.Format(cmdText, inClause))) {
for(int i = 0; i < paramNames.Length; i++) {
cmd.Parameters.AddWithValue(paramNames[i], tags[i]);
}
}
Which will give you:
cmd.CommandText = "SELECT * FROM Tags WHERE Name IN (#tag0, #tag1, #tag2, #tag3)"
cmd.Parameters["#tag0"] = "ruby"
cmd.Parameters["#tag1"] = "rails"
cmd.Parameters["#tag2"] = "scruffy"
cmd.Parameters["#tag3"] = "rubyonrails"
No, this is not open to SQL injection. The only injected text into CommandText is not based on user input. It's solely based on the hardcoded "#tag" prefix, and the index of an array. The index will always be an integer, is not user generated, and is safe.
The user inputted values are still stuffed into parameters, so there is no vulnerability there.
Edit:
Injection concerns aside, take care to note that constructing the command text to accomodate a variable number of parameters (as above) impede's SQL server's ability to take advantage of cached queries. The net result is that you almost certainly lose the value of using parameters in the first place (as opposed to merely inserting the predicate strings into the SQL itself).
Not that cached query plans aren't valuable, but IMO this query isn't nearly complicated enough to see much benefit from it. While the compilation costs may approach (or even exceed) the execution costs, you're still talking milliseconds.
If you have enough RAM, I'd expect SQL Server would probably cache a plan for the common counts of parameters as well. I suppose you could always add five parameters, and let the unspecified tags be NULL - the query plan should be the same, but it seems pretty ugly to me and I'm not sure that it'd worth the micro-optimization (although, on Stack Overflow - it may very well be worth it).
Also, SQL Server 7 and later will auto-parameterize queries, so using parameters isn't really necessary from a performance standpoint - it is, however, critical from a security standpoint - especially with user inputted data like this.
Here's a quick-and-dirty technique I have used:
SELECT * FROM Tags
WHERE '|ruby|rails|scruffy|rubyonrails|'
LIKE '%|' + Name + '|%'
So here's the C# code:
string[] tags = new string[] { "ruby", "rails", "scruffy", "rubyonrails" };
const string cmdText = "select * from tags where '|' + #tags + '|' like '%|' + Name + '|%'";
using (SqlCommand cmd = new SqlCommand(cmdText)) {
cmd.Parameters.AddWithValue("#tags", string.Join("|", tags);
}
Two caveats:
The performance is terrible. LIKE "%...%" queries are not indexed.
Make sure you don't have any |, blank, or null tags or this won't work
There are other ways to accomplish this that some people may consider cleaner, so please keep reading.
For SQL Server 2008, you can use a table valued parameter. It's a bit of work, but it is arguably cleaner than my other method.
First, you have to create a type
CREATE TYPE dbo.TagNamesTableType AS TABLE ( Name nvarchar(50) )
Then, your ADO.NET code looks like this:
string[] tags = new string[] { "ruby", "rails", "scruffy", "rubyonrails" };
cmd.CommandText = "SELECT Tags.* FROM Tags JOIN #tagNames as P ON Tags.Name = P.Name";
// value must be IEnumerable<SqlDataRecord>
cmd.Parameters.AddWithValue("#tagNames", tags.AsSqlDataRecord("Name")).SqlDbType = SqlDbType.Structured;
cmd.Parameters["#tagNames"].TypeName = "dbo.TagNamesTableType";
// Extension method for converting IEnumerable<string> to IEnumerable<SqlDataRecord>
public static IEnumerable<SqlDataRecord> AsSqlDataRecord(this IEnumerable<string> values, string columnName) {
if (values == null || !values.Any()) return null; // Annoying, but SqlClient wants null instead of 0 rows
var firstRecord = values.First();
var metadata= new SqlMetaData(columnName, SqlDbType.NVarChar, 50); //50 as per SQL Type
return values.Select(v =>
{
var r = new SqlDataRecord(metadata);
r.SetValues(v);
return r;
});
}
Update
As Per #Doug
Please try to avoid var metadata = SqlMetaData.InferFromValue(firstRecord, columnName);
It's set first value length, so if first value is 3 characters then its set max length 3 and other records will truncated if more then 3 characters.
So, please try to use: var metadata= new SqlMetaData(columnName, SqlDbType.NVarChar, maxLen);
Note: -1 for max length.
The original question was "How do I parameterize a query ..."
This is not an answer to that original question. There are some very good demonstrations of how to do that, in other answers.
See the first answer from Mark Brackett (the first answer starting "You can parameterize each value") and Mark Brackett's second answer for the preferred answer that I (and 231 others) upvoted. The approach given in his answer allows 1) for effective use of bind variables, and 2) for predicates that are sargable.
Selected answer
I am addressing here the approach given in Joel Spolsky's answer, the answer "selected" as the right answer.
Joel Spolsky's approach is clever. And it works reasonably, it's going to exhibit predictable behavior and predictable performance, given "normal" values, and with the normative edge cases, such as NULL and the empty string. And it may be sufficient for a particular application.
But in terms generalizing this approach, let's also consider the more obscure corner cases, like when the Name column contains a wildcard character (as recognized by the LIKE predicate.) The wildcard character I see most commonly used is % (a percent sign.). So let's deal with that here now, and later go on to other cases.
Some problems with % character
Consider a Name value of 'pe%ter'. (For the examples here, I use a literal string value in place of the column name.) A row with a Name value of `'pe%ter' would be returned by a query of the form:
select ...
where '|peanut|butter|' like '%|' + 'pe%ter' + '|%'
But that same row will not be returned if the order of the search terms is reversed:
select ...
where '|butter|peanut|' like '%|' + 'pe%ter' + '|%'
The behavior we observe is kind of odd. Changing the order of the search terms in the list changes the result set.
It almost goes without saying that we might not want pe%ter to match peanut butter, no matter how much he likes it.
Obscure corner case
(Yes, I will agree that this is an obscure case. Probably one that is not likely to be tested. We wouldn't expect a wildcard in a column value. We may assume that the application prevents such a value from being stored. But in my experience, I've rarely seen a database constraint that specifically disallowed characters or patterns that would be considered wildcards on the right side of a LIKE comparison operator.
Patching a hole
One approach to patching this hole is to escape the % wildcard character. (For anyone not familiar with the escape clause on the operator, here's a link to the SQL Server documentation.
select ...
where '|peanut|butter|'
like '%|' + 'pe\%ter' + '|%' escape '\'
Now we can match the literal %. Of course, when we have a column name, we're going to need to dynamically escape the wildcard. We can use the REPLACE function to find occurrences of the % character and insert a backslash character in front of each one, like this:
select ...
where '|pe%ter|'
like '%|' + REPLACE( 'pe%ter' ,'%','\%') + '|%' escape '\'
So that solves the problem with the % wildcard. Almost.
Escape the escape
We recognize that our solution has introduced another problem. The escape character. We see that we're also going to need to escape any occurrences of escape character itself. This time, we use the ! as the escape character:
select ...
where '|pe%t!r|'
like '%|' + REPLACE(REPLACE( 'pe%t!r' ,'!','!!'),'%','!%') + '|%' escape '!'
The underscore too
Now that we're on a roll, we can add another REPLACE handle the underscore wildcard. And just for fun, this time, we'll use $ as the escape character.
select ...
where '|p_%t!r|'
like '%|' + REPLACE(REPLACE(REPLACE( 'p_%t!r' ,'$','$$'),'%','$%'),'_','$_') + '|%' escape '$'
I prefer this approach to escaping because it works in Oracle and MySQL as well as SQL Server. (I usually use the \ backslash as the escape character, since that's the character we use in regular expressions. But why be constrained by convention!
Those pesky brackets
SQL Server also allows for wildcard characters to be treated as literals by enclosing them in brackets []. So we're not done fixing yet, at least for SQL Server. Since pairs of brackets have special meaning, we'll need to escape those as well. If we manage to properly escape the brackets, then at least we won't have to bother with the hyphen - and the carat ^ within the brackets. And we can leave any % and _ characters inside the brackets escaped, since we'll have basically disabled the special meaning of the brackets.
Finding matching pairs of brackets shouldn't be that hard. It's a little more difficult than handling the occurrences of singleton % and _. (Note that it's not sufficient to just escape all occurrences of brackets, because a singleton bracket is considered to be a literal, and doesn't need to be escaped. The logic is getting a little fuzzier than I can handle without running more test cases.)
Inline expression gets messy
That inline expression in the SQL is getting longer and uglier. We can probably make it work, but heaven help the poor soul that comes behind and has to decipher it. As much of a fan I am for inline expressions, I'm inclined not use one here, mainly because I don't want to have to leave a comment explaining the reason for the mess, and apologizing for it.
A function where ?
Okay, so, if we don't handle that as an inline expression in the SQL, the closest alternative we have is a user defined function. And we know that won't speed things up any (unless we can define an index on it, like we could with Oracle.) If we've got to create a function, we might better do that in the code that calls the SQL statement.
And that function may have some differences in behavior, dependent on the DBMS and version. (A shout out to all you Java developers so keen on being able to use any database engine interchangeably.)
Domain knowledge
We may have specialized knowledge of the domain for the column, (that is, the set of allowable values enforced for the column. We may know a priori that the values stored in the column will never contain a percent sign, an underscore, or bracket pairs. In that case, we just include a quick comment that those cases are covered.
The values stored in the column may allow for % or _ characters, but a constraint may require those values to be escaped, perhaps using a defined character, such that the values are LIKE comparison "safe". Again, a quick comment about the allowed set of values, and in particular which character is used as an escape character, and go with Joel Spolsky's approach.
But, absent the specialized knowledge and a guarantee, it's important for us to at least consider handling those obscure corner cases, and consider whether the behavior is reasonable and "per the specification".
Other issues recapitulated
I believe others have already sufficiently pointed out some of the other commonly considered areas of concern:
SQL injection (taking what would appear to be user supplied information, and including that in the SQL text rather than supplying them through bind variables. Using bind variables isn't required, it's just one convenient approach to thwart with SQL injection. There are other ways to deal with it:
optimizer plan using index scan rather than index seeks, possible need for an expression or function for escaping wildcards (possible index on expression or function)
using literal values in place of bind variables impacts scalability
Conclusion
I like Joel Spolsky's approach. It's clever. And it works.
But as soon as I saw it, I immediately saw a potential problem with it, and it's not my nature to let it slide. I don't mean to be critical of the efforts of others. I know many developers take their work very personally, because they invest so much into it and they care so much about it. So please understand, this is not a personal attack. What I'm identifying here is the type of problem that crops up in production rather than testing.
You can pass the parameter as a string
So you have the string
DECLARE #tags
SET #tags = ‘ruby|rails|scruffy|rubyonrails’
select * from Tags
where Name in (SELECT item from fnSplit(#tags, ‘|’))
order by Count desc
Then all you have to do is pass the string as 1 parameter.
Here is the split function I use.
CREATE FUNCTION [dbo].[fnSplit](
#sInputList VARCHAR(8000) -- List of delimited items
, #sDelimiter VARCHAR(8000) = ',' -- delimiter that separates items
) RETURNS #List TABLE (item VARCHAR(8000))
BEGIN
DECLARE #sItem VARCHAR(8000)
WHILE CHARINDEX(#sDelimiter,#sInputList,0) <> 0
BEGIN
SELECT
#sItem=RTRIM(LTRIM(SUBSTRING(#sInputList,1,CHARINDEX(#sDelimiter,#sInputList,0)-1))),
#sInputList=RTRIM(LTRIM(SUBSTRING(#sInputList,CHARINDEX(#sDelimiter,#sInputList,0)+LEN(#sDelimiter),LEN(#sInputList))))
IF LEN(#sItem) > 0
INSERT INTO #List SELECT #sItem
END
IF LEN(#sInputList) > 0
INSERT INTO #List SELECT #sInputList -- Put the last item in
RETURN
END
I heard Jeff/Joel talk about this on the podcast today (episode 34, 2008-12-16 (MP3, 31 MB), 1 h 03 min 38 secs - 1 h 06 min 45 secs), and I thought I recalled Stack Overflow was using LINQ to SQL, but maybe it was ditched. Here's the same thing in LINQ to SQL.
var inValues = new [] { "ruby","rails","scruffy","rubyonrails" };
var results = from tag in Tags
where inValues.Contains(tag.Name)
select tag;
That's it. And, yes, LINQ already looks backwards enough, but the Contains clause seems extra backwards to me. When I had to do a similar query for a project at work, I naturally tried to do this the wrong way by doing a join between the local array and the SQL Server table, figuring the LINQ to SQL translator would be smart enough to handle the translation somehow. It didn't, but it did provide an error message that was descriptive and pointed me towards using Contains.
Anyway, if you run this in the highly recommended LINQPad, and run this query, you can view the actual SQL that the SQL LINQ provider generated. It'll show you each of the values getting parameterized into an IN clause.
If you are calling from .NET, you could use Dapper dot net:
string[] names = new string[] {"ruby","rails","scruffy","rubyonrails"};
var tags = dataContext.Query<Tags>(#"
select * from Tags
where Name in #names
order by Count desc", new {names});
Here Dapper does the thinking, so you don't have to. Something similar is possible with LINQ to SQL, of course:
string[] names = new string[] {"ruby","rails","scruffy","rubyonrails"};
var tags = from tag in dataContext.Tags
where names.Contains(tag.Name)
orderby tag.Count descending
select tag;
In SQL Server 2016+ you could use STRING_SPLIT function:
DECLARE #names NVARCHAR(MAX) = 'ruby,rails,scruffy,rubyonrails';
SELECT *
FROM Tags
WHERE Name IN (SELECT [value] FROM STRING_SPLIT(#names, ','))
ORDER BY [Count] DESC;
or:
DECLARE #names NVARCHAR(MAX) = 'ruby,rails,scruffy,rubyonrails';
SELECT t.*
FROM Tags t
JOIN STRING_SPLIT(#names,',')
ON t.Name = [value]
ORDER BY [Count] DESC;
LiveDemo
The accepted answer will of course work and it is one of the way to go, but it is anti-pattern.
E. Find rows by list of values
This is replacement for common anti-pattern such as creating a dynamic SQL string in application layer or Transact-SQL, or by using LIKE operator:
SELECT ProductId, Name, Tags
FROM Product
WHERE ',1,2,3,' LIKE '%,' + CAST(ProductId AS VARCHAR(20)) + ',%';
Addendum:
To improve the STRING_SPLIT table function row estimation, it is a good idea to materialize splitted values as temporary table/table variable:
DECLARE #names NVARCHAR(MAX) = 'ruby,rails,scruffy,rubyonrails,sql';
CREATE TABLE #t(val NVARCHAR(120));
INSERT INTO #t(val) SELECT s.[value] FROM STRING_SPLIT(#names, ',') s;
SELECT *
FROM Tags tg
JOIN #t t
ON t.val = tg.TagName
ORDER BY [Count] DESC;
SEDE - Live Demo
Related: How to Pass a List of Values Into a Stored Procedure
Original question has requirement SQL Server 2008. Because this question is often used as duplicate, I've added this answer as reference.
This is possibly a half nasty way of doing it, I used it once, was rather effective.
Depending on your goals it might be of use.
Create a temp table with one column.
INSERT each look-up value into that column.
Instead of using an IN, you can then just use your standard JOIN rules. ( Flexibility++ )
This has a bit of added flexibility in what you can do, but it's more suited for situations where you have a large table to query, with good indexing, and you want to use the parametrized list more than once. Saves having to execute it twice and have all the sanitation done manually.
I never got around to profiling exactly how fast it was, but in my situation it was needed.
We have function that creates a table variable that you can join to:
ALTER FUNCTION [dbo].[Fn_sqllist_to_table](#list AS VARCHAR(8000),
#delim AS VARCHAR(10))
RETURNS #listTable TABLE(
Position INT,
Value VARCHAR(8000))
AS
BEGIN
DECLARE #myPos INT
SET #myPos = 1
WHILE Charindex(#delim, #list) > 0
BEGIN
INSERT INTO #listTable
(Position,Value)
VALUES (#myPos,LEFT(#list, Charindex(#delim, #list) - 1))
SET #myPos = #myPos + 1
IF Charindex(#delim, #list) = Len(#list)
INSERT INTO #listTable
(Position,Value)
VALUES (#myPos,'')
SET #list = RIGHT(#list, Len(#list) - Charindex(#delim, #list))
END
IF Len(#list) > 0
INSERT INTO #listTable
(Position,Value)
VALUES (#myPos,#list)
RETURN
END
So:
#Name varchar(8000) = null // parameter for search values
select * from Tags
where Name in (SELECT value From fn_sqllist_to_table(#Name,',')))
order by Count desc
This is gross, but if you are guaranteed to have at least one, you could do:
SELECT ...
...
WHERE tag IN( #tag1, ISNULL( #tag2, #tag1 ), ISNULL( #tag3, #tag1 ), etc. )
Having IN( 'tag1', 'tag2', 'tag1', 'tag1', 'tag1' ) will be easily optimized away by SQL Server. Plus, you get direct index seeks
I would pass a table type parameter (since it's SQL Server 2008), and do a where exists, or inner join. You may also use XML, using sp_xml_preparedocument, and then even index that temporary table.
In my opinion, the best source to solve this problem, is what has been posted on this site:
Syscomments. Dinakar Nethi
CREATE FUNCTION dbo.fnParseArray (#Array VARCHAR(1000),#separator CHAR(1))
RETURNS #T Table (col1 varchar(50))
AS
BEGIN
--DECLARE #T Table (col1 varchar(50))
-- #Array is the array we wish to parse
-- #Separator is the separator charactor such as a comma
DECLARE #separator_position INT -- This is used to locate each separator character
DECLARE #array_value VARCHAR(1000) -- this holds each array value as it is returned
-- For my loop to work I need an extra separator at the end. I always look to the
-- left of the separator character for each array value
SET #array = #array + #separator
-- Loop through the string searching for separtor characters
WHILE PATINDEX('%' + #separator + '%', #array) <> 0
BEGIN
-- patindex matches the a pattern against a string
SELECT #separator_position = PATINDEX('%' + #separator + '%',#array)
SELECT #array_value = LEFT(#array, #separator_position - 1)
-- This is where you process the values passed.
INSERT into #T VALUES (#array_value)
-- Replace this select statement with your processing
-- #array_value holds the value of this element of the array
-- This replaces what we just processed with and empty string
SELECT #array = STUFF(#array, 1, #separator_position, '')
END
RETURN
END
Use:
SELECT * FROM dbo.fnParseArray('a,b,c,d,e,f', ',')
CREDITS FOR: Dinakar Nethi
The proper way IMHO is to store the list in a character string (limited in length by what the DBMS support); the only trick is that (in order to simplify processing) I have a separator (a comma in my example) at the beginning and at the end of the string. The idea is to "normalize on the fly", turning the list into a one-column table that contains one row per value. This allows you to turn
in (ct1,ct2, ct3 ... ctn)
into an
in (select ...)
or (the solution I'd probably prefer) a regular join, if you just add a "distinct" to avoid problems with duplicate values in the list.
Unfortunately, the techniques to slice a string are fairly product-specific.
Here is the SQL Server version:
with qry(n, names) as
(select len(list.names) - len(replace(list.names, ',', '')) - 1 as n,
substring(list.names, 2, len(list.names)) as names
from (select ',Doc,Grumpy,Happy,Sneezy,Bashful,Sleepy,Dopey,' names) as list
union all
select (n - 1) as n,
substring(names, 1 + charindex(',', names), len(names)) as names
from qry
where n > 1)
select n, substring(names, 1, charindex(',', names) - 1) dwarf
from qry;
The Oracle version:
select n, substr(name, 1, instr(name, ',') - 1) dwarf
from (select n,
substr(val, 1 + instr(val, ',', 1, n)) name
from (select rownum as n,
list.val
from (select ',Doc,Grumpy,Happy,Sneezy,Bashful,Sleepy,Dopey,' val
from dual) list
connect by level < length(list.val) -
length(replace(list.val, ',', ''))));
and the MySQL version:
select pivot.n,
substring_index(substring_index(list.val, ',', 1 + pivot.n), ',', -1) from (select 1 as n
union all
select 2 as n
union all
select 3 as n
union all
select 4 as n
union all
select 5 as n
union all
select 6 as n
union all
select 7 as n
union all
select 8 as n
union all
select 9 as n
union all
select 10 as n) pivot, (select ',Doc,Grumpy,Happy,Sneezy,Bashful,Sleepy,Dopey,' val) as list where pivot.n < length(list.val) -
length(replace(list.val, ',', ''));
(Of course, "pivot" must return as many rows as the maximum number of
items we can find in the list)
If you've got SQL Server 2008 or later I'd use a Table Valued Parameter.
If you're unlucky enough to be stuck on SQL Server 2005 you could add a CLR function like this,
[SqlFunction(
DataAccessKind.None,
IsDeterministic = true,
SystemDataAccess = SystemDataAccessKind.None,
IsPrecise = true,
FillRowMethodName = "SplitFillRow",
TableDefinintion = "s NVARCHAR(MAX)"]
public static IEnumerable Split(SqlChars seperator, SqlString s)
{
if (s.IsNull)
return new string[0];
return s.ToString().Split(seperator.Buffer);
}
public static void SplitFillRow(object row, out SqlString s)
{
s = new SqlString(row.ToString());
}
Which you could use like this,
declare #desiredTags nvarchar(MAX);
set #desiredTags = 'ruby,rails,scruffy,rubyonrails';
select * from Tags
where Name in [dbo].[Split] (',', #desiredTags)
order by Count desc
I think this is a case when a static query is just not the way to go. Dynamically build the list for your in clause, escape your single quotes, and dynamically build SQL. In this case you probably won't see much of a difference with any method due to the small list, but the most efficient method really is to send the SQL exactly as it is written in your post. I think it is a good habit to write it the most efficient way, rather than to do what makes the prettiest code, or consider it bad practice to dynamically build SQL.
I have seen the split functions take longer to execute than the query themselves in many cases where the parameters get large. A stored procedure with table valued parameters in SQL 2008 is the only other option I would consider, although this will probably be slower in your case. TVP will probably only be faster for large lists if you are searching on the primary key of the TVP, because SQL will build a temporary table for the list anyway (if the list is large). You won't know for sure unless you test it.
I have also seen stored procedures that had 500 parameters with default values of null, and having WHERE Column1 IN (#Param1, #Param2, #Param3, ..., #Param500). This caused SQL to build a temp table, do a sort/distinct, and then do a table scan instead of an index seek. That is essentially what you would be doing by parameterizing that query, although on a small enough scale that it won't make a noticeable difference. I highly recommend against having NULL in your IN lists, as if that gets changed to a NOT IN it will not act as intended. You could dynamically build the parameter list, but the only obvious thing that you would gain is that the objects would escape the single quotes for you. That approach is also slightly slower on the application end since the objects have to parse the query to find the parameters. It may or may not be faster on SQL, as parameterized queries call sp_prepare, sp_execute for as many times you execute the query, followed by sp_unprepare.
The reuse of execution plans for stored procedures or parameterized queries may give you a performance gain, but it will lock you in to one execution plan determined by the first query that is executed. That may be less than ideal for subsequent queries in many cases. In your case, reuse of execution plans will probably be a plus, but it might not make any difference at all as the example is a really simple query.
Cliffs notes:
For your case anything you do, be it parameterization with a fixed number of items in the list (null if not used), dynamically building the query with or without parameters, or using stored procedures with table valued parameters will not make much of a difference. However, my general recommendations are as follows:
Your case/simple queries with few parameters:
Dynamic SQL, maybe with parameters if testing shows better performance.
Queries with reusable execution plans, called multiple times by simply changing the parameters or if the query is complicated:
SQL with dynamic parameters.
Queries with large lists:
Stored procedure with table valued parameters. If the list can vary by a large amount use WITH RECOMPILE on the stored procedure, or simply use dynamic SQL without parameters to generate a new execution plan for each query.
May be we can use XML here:
declare #x xml
set #x='<items>
<item myvalue="29790" />
<item myvalue="31250" />
</items>
';
With CTE AS (
SELECT
x.item.value('#myvalue[1]', 'decimal') AS myvalue
FROM #x.nodes('//items/item') AS x(item) )
select * from YourTable where tableColumnName in (select myvalue from cte)
If we have strings stored inside the IN clause with the comma(,) delimited, we can use the charindex function to get the values. If you use .NET, then you can map with SqlParameters.
DDL Script:
CREATE TABLE Tags
([ID] int, [Name] varchar(20))
;
INSERT INTO Tags
([ID], [Name])
VALUES
(1, 'ruby'),
(2, 'rails'),
(3, 'scruffy'),
(4, 'rubyonrails')
;
T-SQL:
DECLARE #Param nvarchar(max)
SET #Param = 'ruby,rails,scruffy,rubyonrails'
SELECT * FROM Tags
WHERE CharIndex(Name,#Param)>0
You can use the above statement in your .NET code and map the parameter with SqlParameter.
Fiddler demo
EDIT:
Create the table called SelectedTags using the following script.
DDL Script:
Create table SelectedTags
(Name nvarchar(20));
INSERT INTO SelectedTags values ('ruby'),('rails')
T-SQL:
DECLARE #list nvarchar(max)
SELECT #list=coalesce(#list+',','')+st.Name FROM SelectedTags st
SELECT * FROM Tags
WHERE CharIndex(Name,#Param)>0
I'd approach this by default with passing a table valued function (that returns a table from a string) to the IN condition.
Here is the code for the UDF (I got it from Stack Overflow somewhere, i can't find the source right now)
CREATE FUNCTION [dbo].[Split] (#sep char(1), #s varchar(8000))
RETURNS table
AS
RETURN (
WITH Pieces(pn, start, stop) AS (
SELECT 1, 1, CHARINDEX(#sep, #s)
UNION ALL
SELECT pn + 1, stop + 1, CHARINDEX(#sep, #s, stop + 1)
FROM Pieces
WHERE stop > 0
)
SELECT
SUBSTRING(#s, start, CASE WHEN stop > 0 THEN stop-start ELSE 512 END) AS s
FROM Pieces
)
Once you got this your code would be as simple as this:
select * from Tags
where Name in (select s from dbo.split(';','ruby;rails;scruffy;rubyonrails'))
order by Count desc
Unless you have a ridiculously long string, this should work well with the table index.
If needed you can insert it into a temp table, index it, then run a join...
For a variable number of arguments like this the only way I'm aware of is to either generate the SQL explicitly or do something that involves populating a temporary table with the items you want and joining against the temp table.
Another possible solution is instead of passing a variable number of arguments to a stored procedure, pass a single string containing the names you're after, but make them unique by surrounding them with '<>'. Then use PATINDEX to find the names:
SELECT *
FROM Tags
WHERE PATINDEX('%<' + Name + '>%','<jo>,<john>,<scruffy>,<rubyonrails>') > 0
Use the following stored procedure. It uses a custom split function, which can be found here.
create stored procedure GetSearchMachingTagNames
#PipeDelimitedTagNames varchar(max),
#delimiter char(1)
as
begin
select * from Tags
where Name in (select data from [dbo].[Split](#PipeDelimitedTagNames,#delimiter)
end
Here is another alternative. Just pass a comma-delimited list as a string parameter to the stored procedure and:
CREATE PROCEDURE [dbo].[sp_myproc]
#UnitList varchar(MAX) = '1,2,3'
AS
select column from table
where ph.UnitID in (select * from CsvToInt(#UnitList))
And the function:
CREATE Function [dbo].[CsvToInt] ( #Array varchar(MAX))
returns #IntTable table
(IntValue int)
AS
begin
declare #separator char(1)
set #separator = ','
declare #separator_position int
declare #array_value varchar(MAX)
set #array = #array + ','
while patindex('%,%' , #array) <> 0
begin
select #separator_position = patindex('%,%' , #array)
select #array_value = left(#array, #separator_position - 1)
Insert #IntTable
Values (Cast(#array_value as int))
select #array = stuff(#array, 1, #separator_position, '')
end
return
end
In ColdFusion we just do:
<cfset myvalues = "ruby|rails|scruffy|rubyonrails">
<cfquery name="q">
select * from sometable where values in <cfqueryparam value="#myvalues#" list="true">
</cfquery>
Here's a technique that recreates a local table to be used in a query string. Doing it this way eliminates all parsing problems.
The string can be built in any language. In this example I used SQL since that was the original problem I was trying to solve. I needed a clean way to pass in table data on the fly in a string to be executed later.
Using a user defined type is optional. Creating the type is only created once and can be done ahead of time. Otherwise just add a full table type to the declaration in the string.
The general pattern is easy to extend and can be used for passing more complex tables.
-- Create a user defined type for the list.
CREATE TYPE [dbo].[StringList] AS TABLE(
[StringValue] [nvarchar](max) NOT NULL
)
-- Create a sample list using the list table type.
DECLARE #list [dbo].[StringList];
INSERT INTO #list VALUES ('one'), ('two'), ('three'), ('four')
-- Build a string in which we recreate the list so we can pass it to exec
-- This can be done in any language since we're just building a string.
DECLARE #str nvarchar(max);
SET #str = 'DECLARE #list [dbo].[StringList]; INSERT INTO #list VALUES '
-- Add all the values we want to the string. This would be a loop in C++.
SELECT #str = #str + '(''' + StringValue + '''),' FROM #list
-- Remove the trailing comma so the query is valid sql.
SET #str = substring(#str, 1, len(#str)-1)
-- Add a select to test the string.
SET #str = #str + '; SELECT * FROM #list;'
-- Execute the string and see we've pass the table correctly.
EXEC(#str)
In SQL Server 2016+ another possibility is to use the OPENJSON function.
This approach is blogged about in OPENJSON - one of best ways to select rows by list of ids.
A full worked example below
CREATE TABLE dbo.Tags
(
Name VARCHAR(50),
Count INT
)
INSERT INTO dbo.Tags
VALUES ('VB',982), ('ruby',1306), ('rails',1478), ('scruffy',1), ('C#',1784)
GO
CREATE PROC dbo.SomeProc
#Tags VARCHAR(MAX)
AS
SELECT T.*
FROM dbo.Tags T
WHERE T.Name IN (SELECT J.Value COLLATE Latin1_General_CI_AS
FROM OPENJSON(CONCAT('[', #Tags, ']')) J)
ORDER BY T.Count DESC
GO
EXEC dbo.SomeProc #Tags = '"ruby","rails","scruffy","rubyonrails"'
DROP TABLE dbo.Tags
I have an answer that doesn't require a UDF, XML
Because IN accepts a select statement
e.g. SELECT * FROM Test where Data IN (SELECT Value FROM TABLE)
You really only need a way to convert the string into a table.
This can be done with a recursive CTE, or a query with a number table (or Master..spt_value)
Here's the CTE version.
DECLARE #InputString varchar(8000) = 'ruby,rails,scruffy,rubyonrails'
SELECT #InputString = #InputString + ','
;WITH RecursiveCSV(x,y)
AS
(
SELECT
x = SUBSTRING(#InputString,0,CHARINDEX(',',#InputString,0)),
y = SUBSTRING(#InputString,CHARINDEX(',',#InputString,0)+1,LEN(#InputString))
UNION ALL
SELECT
x = SUBSTRING(y,0,CHARINDEX(',',y,0)),
y = SUBSTRING(y,CHARINDEX(',',y,0)+1,LEN(y))
FROM
RecursiveCSV
WHERE
SUBSTRING(y,CHARINDEX(',',y,0)+1,LEN(y)) <> '' OR
SUBSTRING(y,0,CHARINDEX(',',y,0)) <> ''
)
SELECT
*
FROM
Tags
WHERE
Name IN (select x FROM RecursiveCSV)
OPTION (MAXRECURSION 32767);
I use a more concise version of the top voted answer:
List<SqlParameter> parameters = tags.Select((s, i) => new SqlParameter("#tag" + i.ToString(), SqlDbType.NVarChar(50)) { Value = s}).ToList();
var whereCondition = string.Format("tags in ({0})", String.Join(",",parameters.Select(s => s.ParameterName)));
It does loop through the tag parameters twice; but that doesn't matter most of the time (it won't be your bottleneck; if it is, unroll the loop).
If you're really interested in performance and don't want to iterate through the loop twice, here's a less beautiful version:
var parameters = new List<SqlParameter>();
var paramNames = new List<string>();
for (var i = 0; i < tags.Length; i++)
{
var paramName = "#tag" + i;
//Include size and set value explicitly (not AddWithValue)
//Because SQL Server may use an implicit conversion if it doesn't know
//the actual size.
var p = new SqlParameter(paramName, SqlDbType.NVarChar(50) { Value = tags[i]; }
paramNames.Add(paramName);
parameters.Add(p);
}
var inClause = string.Join(",", paramNames);
Here is another answer to this problem.
(new version posted on 6/4/13).
private static DataSet GetDataSet(SqlConnectionStringBuilder scsb, string strSql, params object[] pars)
{
var ds = new DataSet();
using (var sqlConn = new SqlConnection(scsb.ConnectionString))
{
var sqlParameters = new List<SqlParameter>();
var replacementStrings = new Dictionary<string, string>();
if (pars != null)
{
for (int i = 0; i < pars.Length; i++)
{
if (pars[i] is IEnumerable<object>)
{
List<object> enumerable = (pars[i] as IEnumerable<object>).ToList();
replacementStrings.Add("#" + i, String.Join(",", enumerable.Select((value, pos) => String.Format("#_{0}_{1}", i, pos))));
sqlParameters.AddRange(enumerable.Select((value, pos) => new SqlParameter(String.Format("#_{0}_{1}", i, pos), value ?? DBNull.Value)).ToArray());
}
else
{
sqlParameters.Add(new SqlParameter(String.Format("#{0}", i), pars[i] ?? DBNull.Value));
}
}
}
strSql = replacementStrings.Aggregate(strSql, (current, replacementString) => current.Replace(replacementString.Key, replacementString.Value));
using (var sqlCommand = new SqlCommand(strSql, sqlConn))
{
if (pars != null)
{
sqlCommand.Parameters.AddRange(sqlParameters.ToArray());
}
else
{
//Fail-safe, just in case a user intends to pass a single null parameter
sqlCommand.Parameters.Add(new SqlParameter("#0", DBNull.Value));
}
using (var sqlDataAdapter = new SqlDataAdapter(sqlCommand))
{
sqlDataAdapter.Fill(ds);
}
}
}
return ds;
}
Cheers.
The only winning move is not to play.
No infinite variability for you. Only finite variability.
In the SQL you have a clause like this:
and ( {1}==0 or b.CompanyId in ({2},{3},{4},{5},{6}) )
In the C# code you do something like this:
int origCount = idList.Count;
if (origCount > 5) {
throw new Exception("You may only specify up to five originators to filter on.");
}
while (idList.Count < 5) { idList.Add(-1); } // -1 is an impossible value
return ExecuteQuery<PublishDate>(getValuesInListSQL,
origCount,
idList[0], idList[1], idList[2], idList[3], idList[4]);
So basically if the count is 0 then there is no filter and everything goes through. If the count is higher than 0 the then the value must be in the list, but the list has been padded out to five with impossible values (so that the SQL still makes sense)
Sometimes the lame solution is the only one that actually works.