Am I right that you'd only need a using() for the outermost stream if you're doing e.g
MemoryStream mstr = new MemoryStream();
using(StreamWriter w = new StreamWriter(mstr)) {
....
}
As disposing the StreamWriter should also dispose/close the underlying stream, there's no need to do this ?:
using(MemoryStream mstr = new MemoryStream())
using(StreamWriter w = new StreamWriter(mstr)) {
....
}
(Note these are just examples, for how to dispose wrapped streams, not looking for alternatives like just use a StringWriter etc.)
It's a good idea to put all dependent resources in their own using blocks from a readability and maintainability point of view as much as anything. e.g. in the below code, after the final brace, it's impossible to attempt to access mstr because it is scoped to within the block where it is valid:
using (MemoryStream mstr = new MemoryStream())
using (StreamWriter w = new StreamWriter(mstr) {
....
}
// cannot attempt to access mstr here
If you don't scope it like this, then it's still possible to access mstr outside the scope of where it is valid
MemoryStream mstr = new MemoryStream();
using (StreamWriter w = new StreamWriter(mstr) {
....
}
mstr.Write(...); // KABOOM! ObjectDisposedException occurs here!
So while it may not always be necessary (and in this case it isn't) it's a good idea as it both clarifies and enforces your intention as to its scope.
My rule of thumb: If it implements IDisposable, dispose of it.
While currently (and probably forever), calling StreamWriter.Dispose() closes the underlying stream, other stream-derived classes you may use in the future may not. Also, it seems not to actually call Dispose() either, so non-MemoryStreams may not get properly disposed (although I can't think of any that would suffer from that right now).
So, while you can safely dispose only of the StreamWriter, I find it a much better practice to always use using blocks for disposables whenever possible.
From looking at the StreamWriter.Dispose method in Reflector, it looks like the underlying streams get closed, but not disposed. I would put each stream in a "using" block in order to explicity dispose of them all.
To answer your actual question. TextWriter's Dispose method
public void Dispose()
{
this.Dispose(true);
GC.SuppressFinalize(this);
}
It calls a protected Dispose and passes true to it. From TextWriter.Dispose Method (Boolean)
When the disposing parameter is true,
this method releases all resources
held by any managed objects that this
TextWriter references. This method
invokes the Dispose method of each
referenced object.
However it is best practice to wrap everything that implements IDisposable in a using block, because we cannot guarantee that that the protected Dipose method will always be called with the true parameter.
It's really a better practice to just always use a using block.
"Always", except for the one well-known case of WCF proxy classes, where a design flaw can sometimes cause their Dispose methods to throw an exception, losing your original exception.
Related
When "nesting" using statements/blocks, such as a StreamWriter within a FileStream
using (FileStream fs = File.Open(path, FileMode.Create))
{
using (var fsw = new StreamWriter(fs))
{
...
}
}
Would the FileStream be properly disposed of if it's reference is implicit? If not, would FileStream dispose of it when it itself is disposed of?
using (var fsw = new StreamWriter(File.Open(path, FileMode.Create)) )
{
...
}
Also, does the following "stacked" using statements generate differently than the first example that is "nested" (are the try/catch blocks nested or not depending on the syntax)?
using (FileStream fs = File.Open(path, FileMode.Create))
using (var fsw = new StreamWriter(fs))
{
...
}
Would the FileStream be properly disposed of if it's reference is implicit? Will FileStream dispose of it when it itself is disposed of?
The question is nonsensical. I believe the question you intended to ask is:
If the StreamWriter (or reader) is disposed (or closed), will it automatically dispose the underlying Stream?
Yes. For future reference, consider reading the documentation; your question is clearly answered there.
Now, you might reason as follows: suppose a thread abort exception is thrown after the creation of the stream but before the creation of the writer or reader. In the two-usings case, the stream is disposed; in the one-using case, it is not. Therefore the two-using case is both different and better.
That reasoning is specious. Suppose a thread abort exception is thrown after the handle for the stream is allocated but before the file stream variable is assigned; even in the two-usings case, the stream is not disposed.
The moral of the story is: you must not rely upon using to dispose of critical resources in a world with thread abort exceptions. using is for politeness; it is not a guarantee that a resource will be deallocated.
does the following "stacked" using statements generate differently than the first example that is "nested"?
Please only ask one question per question.
The question is unclear. Is your question whether the two forms are exactly semantically equivalent, or whether they generate exactly the same IL? Those questions have opposite answer. Yes, they are semantically equivalent, and no, they do not necessarily generate the same IL if optimizations are turned off.
In general,
statement
and
{
statement
}
are semantically equivalent. (Though note that a declaration statement is syntactically illegal in some contexts where a statement block is not. And of course, braces introduce a declaration space.)
However the C# compiler may choose to generate extra nop instructions so that the debugger has some place to put breakpoints associated with the braces. Thus, the code generated is not identical. Generating extra nops can cause knock-on effects on branch locations, and therefore branch offset sizes, and therefore branch instruction sizes, and therefore branch instruction opcodes, for instance.
Would the FileStream be properly disposed of if it's reference made
implicit?
Yes. The var keyword gets determined at compile time and it would result in the same code and be disposed of correctly.
Also, does the following generate differently than the first example
that is nested (are the try/catch blocks nested or not depending on
the syntax)?
There is no catch block with the using statement. The using statement is the equivalent of try finally. Depending on the compiler optimizations, the original code may result in the same as the stacked using statement. Logically, it really shouldn't matter.
Prior to .NET 4.5 the StreamWriter class assumed it owned the stream that was passed into it. So the below will close and dispose of the FileStream when the StreamWriter is closed/disposed.
using (var fsw = new StreamWriter(File.Open(path, FileMode.Create)) )
{
...
}
As of .NET 4.5 there is a StreamWriter constructor with a Boolean parameter that, when True, will leave the FileStream open.
So you have control over whether the FileStream is disposed or not.
As for stacking the using statements: the { }'s are optional when containing a single statement, just as they are for if, for and so on. Stacking the using's is a formatting convenience for those who view the indention to be excessive and unnecessary.
I would suggest following the same convention you would for other block statements when they contain a single statement to keep your code consistent.
I often use the "using" block to dispose the objects.
Today, I using HttpWebRequest to post data, and I feel confused between two method.
Method 1:
var request = (HttpWebRequest)WebRequest.Create("http://www...");
using (var writer = new StreamWriter(request.GetRequestStream()))
{
writer.Write(JsonConvert.SerializeObject(content));
}
Method 2:
var request = (HttpWebRequest)WebRequest.Create("http://www...");
using (var stream = request.GetRequestStream())
using (var writer = new StreamWriter(stream))
{
writer.Write(JsonConvert.SerializeObject(content));
}
In method 2, all stream and streamwirter in "using" blocks, so certainly it will be dispose. But in method 1, I am not sure stream request.GetRequestStream() will be dispose. Can anyone explain to me? Thanks alot!
Basically, it depends on two things:
Whether the StreamWriter constructor will ever throw an exception when passed a non-null Stream reference - and I don't think it will in this case. (If the stream were read-only, it would... at which point the stream wouldn't be disposed.)
Whether StreamWriter.Dispose disposes of the underlying stream - and it does, unless you've called the constructor overload which explicitly allows you to control that
So basically, I believe it's safe in this case... when your using statement disposes of the StreamWriter, that will dispose of the Stream.
As noted in comments, however, using two using statements means you don't need to perform this sort of reasoning.
A StreamWriter wrapping a Stream will close that stream when it is closed. See the docs.
Both are the same. Since using block disposes the entire object, even anonymous objects.
I have a readonly FileStream which is a method local variable:
public void SomeMethod()
{
var fileStream = File.Open(fileName, FileMode.Open, FileAccess.Read, FileShare.ReadWrite));
... //some stream operations
}
Should I call Dispose (explicitly or by "using") at the end of the method? What will it change?
It doesn't matter what it does, IDisposable is implemented by FileStream, and so you need to call Dispose implicitly or explicitly when you've finished using it. It is part of the contract of using the class in your code.
I think it's best to wrap that in a using statement. You also need exception handling if you really want that code to be robust. It will work as it is now, it's just bad practice.
It is a must to dispose any instance implementing IDisposable and a good practice to dispose it trough using statement.
Don't think that analyzing every case in particular would help.
If you fail to dispose, the FileStream won't be closed until the GC kicks in (non-deterministically).
And until this happens, you will be holding an open file handle, preventing some types of access to the file (e.g. writing, deletion).
Note that specifying FileShare.ReadWrite won't necessarily help - if another writer attempts to open the file with FileShare.None (e.g. by calling File.OpenWrite), he won't be able to do so until you close the file.
So, yes, do close the file, with a using statement.
If an object can be disposed, you should dispose it as early as you don't need it anymore. From FileStream Class topic:
If a process terminates with part of a file locked or closes a file
that has outstanding locks, the behavior is undefined.
As everyone suggested: dispose every IDisposable, preferably with using.
Now for files there could be special case when you really want to block everyone else from accessing/modifying the file. In this case you'd still dispose file at some point, but this "some point" can be significantly later in the code/application lifetime.
This seems like a fairly straightforward question, but I couldn't find this particular use-case after some searching around.
Suppose I have a simple method that, say, determines if a file is opened by some process. I can do this (not 100% correctly, but fairly well) with this:
public bool IsOpen(string fileName)
{
try
{
File.Open(fileName, FileMode.Open, FileAccess.Read, FileShare.None);
}
catch
{
// if an exception is thrown, the file must be opened by some other process
return true;
}
}
(obviously this isn't the best or even correct way to determine this - File.Open throws a number of different exceptions, all with different meanings, but it works for this example)
Now the File.Open call returns a FileStream, and FileStream implements IDisposable. Normally we'd want to wrap the usage of any FileStream instantiations in a using block to make sure they're disposed of properly. But what happens in the case where we don't actually assign the return value to anything? Is it still necessary to dispose of the FileStream, like so:
try
{
using (File.Open(fileName, FileMode.Open, FileAccess.Read, FileShare.None));
{ /* nop */ }
}
catch
{
return true;
}
Should I create a FileStream instance and dispose of that?
try
{
using (FileStream fs = File.Open(fileName, FileMode.Open, FileAccess.Read, FileShare.None));
}
...
Or are these totally unnecessary? Can we simply call File.Open and not assign it to anything (first code example), and let the GC dispose of it right away?
Yes, you should definitely dispose of the FileStream. Otherwise the stream will remain open and the file won't be usable until a finalizer happens to clean it up.
The important thing here is ownership: for File.Open, the caller is assumed to "own" the stream returned to it - and if you own something which implements IDisposable, it's your responsibility to dispose of it.
Compare this with the situation of Image.FromStream: in that case, you pass in a stream and the Image then assumes that it owns that stream. You mustn't close the stream yourself, in that case - you have to dispose of the image when you're done, and it will dispose of the stream.
Calling a static method which returns something disposable almost always assumes that the caller takes ownership of the resource. Ditto constructors (which are effectively static methods.)
The irony in this case is that if you don't dispose of the stream returned by File.Open, you'll have found that the file is usable - at the same time as making it unusable until some indeterminate time.
If a method returns an IDisposable, I personally would always put it in a using block. Even if I don't assign the return value to anything.
Even if you don't assign it to a variable, the disposable object is still created. Dispose is not going to be called automatically. The only difference will be that the returned object will become immediately eligible for garbage collection, because there are no (strong) references to it.
The garbage collector does not call Dispose automatically when it reclaims an object. However, most IDisposable types provide a finalizer (which will be called just before the GC reclaims an object) that invokes Dispose as a fallback strategy (safety net) — study the IDisposable pattern to see how this is done:
~SomeClass // <-- the finalizer method will usually call Dispose;
{ // but you have no control over when it will be called!
Dispose(false);
}
Remember that you don't know when the garbage collector will run (because it's non-deterministic). Therefore, you also don't know when the finalizer method will be called. And because of that -- if you haven't called Dispose explicitly (either yourself, or with a using block) -- you don't know when it will be called by the finalizer.
That's the advantage of calling Dispose explicitly: You can free resources -- or at least allow the GC to free managed resources -- as soon as you're done with them, instead of holding on to resources until the finalizer gets called sometime in the future.
Yes, you don't want to leave the FileStream opened. For one, you won't even be able to open the file yourself after that. Calling Close() is good enough, but using using is probably the preferred pattern.
There's a much bigger problem with your code however. It cannot possibly work reliably on Windows. A typical scenario:
The File.Open() call succeeds. You close it
Your thread gets pre-empted by the Windows scheduler
Another thread in another process gets a chance to run, it opens the file
Your thread regains the CPU and continues after the File.Open() call
You open the file, trusting that it will work since IsOpen() returned false.
Kaboom.
Never write code like this, failure is extremely hard to diagnose. Only ever open a file when you are ready to start reading or writing to it. And don't close it until you are done.
Extra bonus: it is now obvious that you want to use a using statement.
When you call any method that returns something, an instance of that something is being created. Just because you're not actually capturing it, doesn't make it any less "there". Therefore, in the case of an IDisposable object, the object is being created by the method you're calling in spite of the fact that you're doing nothing with it. So yes, you still need to dispose of it somehow. The first approach with the using statement seems like it should work.
I know there are a number of threads on here about how to use the using statement and calling the Dispose() method. I have read the majority of these threads.
If I call Dispose(), does it call Close()?
If I want to use an object (say SqlDataReader), but then use it again in another code block, should I not call Dispose()? Which also means to omit the using statement.
Also, to clarify, if a FileStream is wrapping a StreamWriter and I call dispose on the FileStream, this will call Flush(), Close() and Dispose() (depending on whether Dispose() calls Close()) on the StreamWriter, right? Likewise, if I call Close on the FileStream, this will only call Flush() and Close() on the FileStream.
Is checking IL a good way to answer these questions about what is happening under the hood?
"If I call Dispose(), does it call Close()?"
In theory, it should. The BCL classes all do this, but it is up to the library author to correctly handle this. If the library you are using is done correctly, Dispose() should also Close() [and Close() will Dispose() - the calls should be interchangable].
"If I want to use an object (say SqlDataReader), but then use it again in another code block, should I not call Dispose()? Which also means to omit the using statement."
Correct. If you use the using statement, it will always call Dispose(). This will close the data reader before your other block can use it.
"Also, to clarify, if a FileStream is wrapping a StreamWriter and I call dispose on the FileStream, this will call Flush(), Close() and Dispose() (depending on whether Dispose() calls Close()) on the StreamWriter, right? Likewise, if I call Close on the FileStream, this will only call Flush() and Close() on the FileStream."
If you are wrapping a FileStream around a StreamWriter, I highly recommend treating them consistently. Use a single using statement with both members, so they are both disposed of at the end of the block. This is the safest, most clean approach.
"Is checking IL a good way to answer these questions about what is happening under the hood?"
It is a way - although a more difficult way. Read up on MSDN about using and streams, and the documentation will explain it in simpler terms than trying to parse the IL. The IL will tell you EXACTLY what happens, though, if you are curious.
If I call Dispose(), does it call Close()?
Close() and Dispose() do the same if implemented properly; it is just a naming thing. It sounds more plain to close a file than to dispose it. See Implementing Finalize and Dispose to Clean Up Unmanaged Resources esspecialy 'Customizing a Dispose Method Name'.
If I want to use an object (say SqlDataReader), but then use it again in another code#
block, should I not call Dispose()? Which also means to omit the using statement.
Yes, because the object gets disposed on exiting the using block.
Also, to clarify, if a FileStream is wrapping a StreamWriter and I call dispose on the > FileStream, this will call Flush(), Close() and Dispose() (depending on whether Dispos()
calls Close()) on the StreamWriter, right? Likewise, if I call Close on the FileStream, > this will only call Flush() and Close() on the FileStream.
It is the other way; a StreamWriter is based on an underlying stream an closing the StreamWriter closes the underlying stream that may be a FileStream; see the MSDN for reference. Hence a single using statement for the StreamWriter is sufficent.
If I call Dispose(), does it call Close()?
Calling Dispose should take any required actions to dispose of the resource, which should be similar, if not identical to, calling Close. This, however, is an implementation detail and not necessarily guaranteed (though we can expect that the BCL follows this guideline).
If I want to use an object (say SqlDataReader), but then use it again in another code block, should I not call Dispose()? Which also means to omit the using statement.
If you want to use the object again, you definitely should not dispose it. However, you should typically use two separate connections if you're going to the database two separate times. It's generally not a good idea to keep an IDataReader around an longer than is needed to grab your needed data.
Also, to clarify, if a FileStream is wrapping a StreamWriter and I call dispose on the FileStream, this will call Flush(), Close() and Dispose() (depending on whether Dispose() calls Close()) on the StreamWriter, right? Likewise, if I call Close on the FileStream, this will only call Flush() and Close() on the FileStream.
Disposing an object that wraps another disposable object should call Dispose on the interior object. Calling Close on a FileStream will call its Dispose method under the good, so it will also act on both streams.
Is checking IL a good way to answer these questions about what is happening under the hood?
Checking IL will definitely answer most of these questions definitively. As #Rich says, you can also just try debugging your own Dispose implementations. There is also, of course, MSDN documentation to start with before you try to figure it out yourself, and Reflector if you don't want to muck around in IL.
If I call Dispose(), does it call Close()?
Not necessarily. I sometimes use Reflector to check what actually happens in Close and Dispose.
If I want to use (...) it again in another code block, should I not call Dispose()?
Correct. Call Dispose when you're done. But that doesn't mean you always want to keep your object alive for a long time - you can sometimes benefit from creating multiple instances (multiple using constructs) -- e.g. You might wan to close a connection as soon as possible, but then create a new one again when you need it.
As you said, there are lot of resources on that, but I will include the MSDN link for some guidelines: Implementing Finalize and Dispose to Clean Up Unmanaged Resources.
An easier way to debug this than going through the IL code would be to derive from your IDisposable, override the necessary methods doing nothing but calling base.[Method Name](), and set a breakpoint in each one. Then if you wrap your derived class in a using block, you'll see the lifecycle of these calls.
No, IDisposable does not require Close(), but the object implementing IDispose may be nice enough to include it in the Dispose() method.
You should dispose it as soon as you have the piece of data you are getting from the DB. Don't leave a reader open any longer than you need. If you are doing any real work with the data, use a dataAdapter/dataset instead of reader.
No Idea. Check the Generated IL
I try to move the using clause higher up, since I prefer to use that syntax. Then call the other blocks using that resource from inside that using block.