Develop Reference

Decrement date month transition

I have a function to decrement a date by one day each time is called.
private IEnumerable<DateTime> EachDay(DateTime from, DateTime thru)
{
for (var day = thru.Date; day.Date >= from.Date; day = day.Subtract(TimeSpan.FromDays(1)))//day.AddDays(-1))
{
yield return day;
}
}
Seems to work fine until i arrive to the previous month. If someone have a solution ?

I would be using something like this
private IEnumerable<DateTime> EachDay(DateTime from, DateTime thru)
{
var days=(thru.Date - from.Date).Days;
if (days <= 0) yield return DateTime.MinValue;
else for (var day = days; day >= 0; day-=1)
yield return from.Date.AddDays(day);
}
test
var thru =new DateTime(day: 01,month:12, year:2021);
var from= thru.AddDays(-10);
EachDay(from,thru).Dump();
result
2021-12-01
2021-11-30
2021-11-29
2021-11-28
2021-11-27
2021-11-26
2021-11-25
2021-11-24
2021-11-23
2021-11-22
2021-11-21

My other answer notwithstanding, you said in a comment on Serge's answer:
when i give 01/12/2021 the response is 01/00/2021
I just wanted to point out that you may get this if you have a date of midnight on 01/12/2021 and you accidentally use a date format of dd/mm/yyyy when printing it out
mm is minutes, not months. MM is months.. If you're stringing your date using mm the 00 you're seeing is the minute from 00:00:00 time, not the month
All in your entire code might be fine (it seems fine to me) and you're being misled by a typo in a ToString

Finally got it. I store the value in a database and a piece of code induce an implicit conversion from native date format to french date format.
I force to use the native date format into all code and all is now fine.
Thanks for your response

To some extent you're reinventing a wheel here. You can use Enumerable.Range to do your dates:
var f = // the date from eg DateTime.Now;
var t = // the date to eg DateTime.Now.AddDays(-45);
//this line of code generates the dates
var d = Enumerable.Range(0, 1 + (int)((f-t).TotalDays)).Select(x => f.AddDays(-x));
The dates in d have no problem crossing a month boundary

Calculate the annual use of a service starting from the date of signing

I need to calculate the annual use of a service starting from the date of signing. Something like:
select Count(*) from TABLENAME where Date >= MYDATE
MYDATE need to be calculate from a subscription date and I need to get the last year date from subscription referring to the current date
Some examples:
subscription date: 2007-06-29
if current date is : 2015-04-29 then date is: 2014-06-29
if current date is : 2015-06-29 then date is: 2015-06-29
if current date is : 2015-06-29 then date is: 2015-06-29
I'm using c# to calculate the date but it crashes in leapyear:
var date = new DateTime(DateTime.Now.Year, subscriptionDate.Month, subscriptionDate.Day);
if (DateTime.Now.Date < date)
{
date = date.AddYears(-1);
}
I was wondering if there were a clever/better way to do it in c# or mysql also handling leapyear
---UPDATE----
Running example with suggested solutions

Well, I'd do it in Noda Time, myself:
LocalDate subscriptionDate = ...;
LocalDate today = ...; // Need to take time zone into account
int years = Period.Between(subscriptionDate, today);
return subscription.PlusYears(years);
With .NET that would be slightly harder, but I'd still go for the approach of adding years (and letting it do the truncation for Feb 29th):
// Only call this *once* - otherwise you could get inconsistent results
DateTime today = DateTime.Today;
int years = today.Year - subscriptionDate.Year;
DateTime candidate = subscriptionDate.AddYears(years);
// We might have overshot, in which case lower the number of years.
return candidate <= today ? candidate : subscriptionDate.AddYears(years - 1);

Thanks to Yuri Dorokhov answer and Jon Skeet suggestion
I found a solution that works well and handle leap year:
int year = DateTime.Now.DayOfYear >= subscriptionDate.DayOfYear ?
DateTime.Now.Year : DateTime.Now.Year - 1;
var date = new DateTime(year, 1, 1).AddDays(subscriptionDate.DayOfYear - 1);
--------UPDATE------
I leave here this answer as reference but it does not handle well leap year so don't use it

Use mysql DATE_SUB function
DATE_SUB(Date, INTERVAL 1 YEAR)

How to set current time to a value

I was just wondering if there is a way to get the current time and set it into a value.
If its 12:06 AM.. I want to get that time and set it into currentTime.
Example
float currentTime = 0;
currentTime = 12.06;

As others have mentioned, the DateTime class would be ideal for this, and to work out the difference between 2 date/times:
DateTime end = DateTime.Now;
DateTime start = new DateTime(2011, 12, 5, 12, 6,0);
double hours = (end - start).TotalHours;
The subtraction of DateTime objects results in a TimeSpan object that you can use to see the hours/minutes etc.

try DateTime class
DateTime dt = DateTime.Now;

Is this what you're looking for?
DateTime currentTime;
currentTime = DateTime.Now;

Don't use floats or strings. You can do all kinds of cool things using DateTime.
Here's how you'd get the hours that someone worked:
var clockIn = new DateTime(2011,12,4,9,0,0); // December 4th, 9 AM
var clockOut = new DateTime(2011,12,4,17,0,0); // December 4th, 5 PM
var duration = clockOut - clockIn; // TimeSpan
Console.Write(duration.TotalHours); // 8

A few people have mentioned how, but as a 'better' recommendation you should use
DateTime currentTime = DateTime.UtcNow
Otherwise you have issues when the clocks go back, if your timing code is run on those days. (plus it is far easier to alter the UTC time to local time than it is to convert a '1am' to UTC (as there will be two of them when the clocks go back)

Well if you really what it as a float then try:
var currentDate = DateTime.Now;
float currentTime = float.Parse((currentDate.Hour > 12 ? currentDate.Hour -12 :
currentDate.Hour) + "." + currentDate.Minute);
I wouldn't recommend comparing dates or time with floats. A better options would be to use timespans.

You should be using a Timespan instance for time related values, you can use the flexibility to get the required values like
TimeSpan ts = DateTime.Now.TimeOfDay;
ts.ToString("hh:mm") // this could be what you are looking for
You could then use ts.TotalHours which would give you fractional hours (as a double) else you could construct a string specifically using ts.Hours ..ts.Minutes play around and it could be prove useful.

Try the following:
DateTime StartTime=StartTime value;
DateTime CurrentTime=DateTime.Now;
TimeSpan dt = CurrentTime.Subtract(StartTime);
In dt you will get a working time period.

If you want to have the difference between two times, then do this:
DateTime dateOne = DateTime.Parse(enteredTime);
DateTime dateTwo = DateTime.Now;
TimeSpan difference = dateOne - dateTwo;

Date comparison - How to check if 20 minutes have passed?

How to check if 20 minutes have passed from current date?
For example:
var start = DateTime.Now;
var oldDate = "08/10/2011 23:50:31";
if(start ??) {
//20 minutes were passed from start
}
what's the best way to do this?
Thanks :)

You should convert your start time to a UTC time, say 'start'.
You can now compare your start time to the current UTC time using:
DateTime.UtcNow > start.AddMinutes(20)
This approach means that you will get the correct answer around daylight savings time changes.
By adding time to the start time instead of subtracting and comparing the total time on a TimeSpan you have a more readable syntax AND you can handle more date difference cases, e.g. 1 month from the start, 2 weeks from the start, ...

var start = DateTime.Now;
var oldDate = DateTime.Parse("08/10/2011 23:50:31");
if ((start - oldDate).TotalMinutes >= 20)
{
//20 minutes were passed from start
}

var start = DateTime.Now;
var oldDate = DateTime.Parse("08/10/2011 23:50:31");
if(start.Subtract(oldDate) >= TimeSpan.FromMinutes(20))
{
//20 minutes were passed from start
}

Parse oldDate into a DateTime object (DateTime.Parse).
Subtract the parsed date from start. This will return a TimeSpan.
Inspect TotalMinutes.

I was able to accomplish this by using a JodaTime Library in my project. I came out with this code.
String datetime1 = "2012/08/24 05:22:34";
String datetime2 = "2012/08/24 05:23:28";
DateTimeFormatter format = DateTimeFormat.forPattern("yyyy/MM/dd HH:mm:ss");
DateTime time1 = format.parseDateTime(datetime1);
DateTime time2 = format.parseDateTime(datetime2);
Minutes Interval = Minutes.minutesBetween(time1, time2);
Minutes minInterval = Minutes.minutes(20);
if(Interval.isGreaterThan(minInterval)){
return true;
}
else{
return false;
}
This will check if the Time Interval between datetime1 and datetime2 is GreaterThan 20 Minutes. Change the property to Seconds. It will be easier for you know. This will return false.

var end = DateTime.Parse(oldDate);
if (start.Hour == end.Hour && start.AddMinutes(20).Minute >= end.Minute)

how to get no of days and nights between two dates using c#

i am doing a project on cab services.in this rate is different for day and night.
in the form only journey start date and end date is selected.based on this i have to calculate the no of days and nights.
here i am confused how to calculate the no of days and night.
thanks in advance.

private List<DateTime> GetDateRange(DateTime StartingDate, DateTime EndingDate)
{
if (StartingDate > EndingDate)
{
return null;
}
List<DateTime> rv = new List<DateTime>();
DateTime tmpDate = StartingDate;
do
{
rv.Add(tmpDate);
tmpDate = tmpDate.AddDays(1);
} while (tmpDate <= EndingDate);
return rv;
}
To view this code in action, copy and paste the following code into SnippetCompiler:
DateTime StartingDate = DateTime.Parse("02/25/2007");
DateTime EndingDate = DateTime.Parse("03/06/2007");
foreach (DateTime date in GetDateRange(StartingDate,EndingDate))
{
WL(date.ToShortDateString());
}
Sample output :
2/25/2007
2/26/2007
2/27/2007
2/28/2007
3/1/2007
3/2/2007
3/3/2007
3/4/2007
3/5/2007
3/6/2007

Use the Subtract method to get the difference, which is a TimeSpan value. Example:
TimeSpan diff = SecondDate.Subtract(FirstDate);
You can get the length of the time span for example in hours:
double hours = diff.TotalHours;
I'm not sure which time unit "days and nights" could be interpreted as, though. Perhaps days?
double days = diff.TotalDays;

DateTime dt1,dt2;
//...
TimeSpan period = dt1 - dt2;
int days = period.Days;

It sounds like a very long Cab journey that takes days and nights!
I think you need to define what a day and a night is more clearly in order to get your perfect answer. You also need to think about what impact Daylight Saving Time has on your calculations.
If say:
a day was the period from 6am to 6pm
the night was the rest - from 6pm to 6am
and you wanted to really count hours rather than days
In this case then a calculation would require you to:
iterate a currentDateTime from the startDateTime to the endDateTime
choose the increment in the currentDateTime so that it jumps to the next time barrier (6am, 6pm or the endDateTime)
within each loop, then add to your cumulative calculation of numDayHours or numNightHours so far.
Note that:
you could make this calculation quicker by counting whole days along the way
you need to be very careful about the time zone you are calculating in (I just hope that your taxi doesn't cross time zone boundaries!)
you need to be very careful about local time changes - especially "daylight savings time" type changes - the duration from 6pm to 6am is not always 12 hours!
Some pseudo code:
var numDayHours = 0.0;
var numNightHours = 0.0;
var current = startDateTime;
while (current < endDateTime)
{
next_hop = calculate_next_hop (current, endDateTime);
// select next date time
switch (next_hop.hop_type)
{
case HopType.night_time_hop:
numNightHours += next_hop.num_hours;
break;
case HopType.day_time_hop:
numDayHours += next_hop.num_hours;
break;
}
current = next_hop.EndDateTime;
}
// and here is the result
double numDays = numDayHours / 12.0;
double numHours = numNightHours / 12.0;