First off, I am not dynamically creating any controls. This is the order I take to produce the error:
I have a listview on the page, when I click the edit link under the listview, I display a panel which is hidden by default. The panel has a few buttons on it along with some listboxes. When I click an item in the listbox or click one of the buttons, I get the following error:
Failed to load viewstate. The control tree into which viewstate is being loaded must match the control tree that was used to save viewstate during the previous request. For example, when adding controls dynamically, the controls added during a post-back must match the type and position of the controls added during the initial request.
Again, I am not creating anything dynamically, I am just hiding the panel with the controls by default and then displaying them, so I am not sure why I am getting this error.
Here is some code:
PAGE LOAD
protected void Page_Load(object sender, EventArgs e)
{
if (!Page.IsPostBack)
{
Session["Albums"] = null;
Albums = AlbumCollection.GetAlbums(Common.GetUserName(),
ddlAlbumType.SelectedIndex);
lvwAlbums.DataSource = Albums;
lvwAlbums.DataBind();
}
}
When I click the edit link, this is the code that runs:
protected void lvwAlbums_RowEditing(object sender, ListViewEditEventArgs e)
{
this.AlbumId = int.Parse(
this.lvwAlbums.DataKeys[e.NewEditIndex].Values["AlbumId"].ToString());
this.AlbumName=
this.lvwAlbums.DataKeys[e.NewEditIndex].Values["AlbumName"].ToString();
Album album = new Album(this.AlbumId);
ViewState["AlbumId"] = this.AlbumId;
ViewState["AlbumName"] = this.AlbumName;
pnlAlbum.Visible = true; // This panel holds the controls
btnEditAlbum.Visible = true;
btnCancel.Visible = true;
EditAlbum(this.AlbumId);
this.lvwAlbums.EditIndex = e.NewEditIndex;
AlbumCollection.GetAlbums(Common.GetUserName(),ddlAlbumType.SelectedIndex);
}
If I click the cancel button, I get the error, but it also happens if click another button on the panel such as Add/Remove... Here is the code for the Cancel button:
pnlAlbum.Visible = false;
this.lvwAlbums.EditIndex = -1;
AlbumCollection.GetAlbums(Common.GetUserName(), ddlAlbumType.SelectedIndex);
Here is the aspx/html for the ListView:
<asp:ListView ID="lvwAlbums"
runat="server"
GroupItemCount="5"
DataKeyNames="AlbumId,AlbumName"
OnItemEditing="lvwAlbums_RowEditing"
OnItemCommand="lvwAlbums_ItemCommand"
OnItemDeleting="lvwAlbums_RowDeleting"
OnSelectedIndexChanging="lvwAlbums_SelectedIndexChanging"
OnPagePropertiesChanging="lvwAlbums_PagePropertiesChanging">
<EditItemTemplate>
<td>
<div>
<asp:TextBox ID="txtAlbumName" runat="server"
Text='<%# Eval("AlbumName").ToString().Trim() %>' />
<asp:LinkButton ID="lnkView" runat="server" Text="View" CommandName="View"
CommandArgument='<%# Eval("AlbumId") %>'>
</asp:LinkButton>
|
<asp:LinkButton ID="lnkEdit" runat="server" Text="Edit" CommandName="Edit"
CommandArgument='<%# Eval("AlbumId") %>'>
</asp:LinkButton>
|
<asp:LinkButton ID="lnkDelete" runat="server" Text="Delete" CommandName="Delete"
CommandArgument='<%# Eval("AlbumId") %>'>
</asp:LinkButton>
<br />
<span>Songs:
<%# Eval("total") %></span>
</div>
</td>
</EditItemTemplate>
<LayoutTemplate>
<asp:DataPager runat="server" ID="ItemDataPager" PageSize="20"
PagedControlID="lvwAlbums">
<Fields>
<asp:NumericPagerField ButtonType="Link" NumericButtonCssClass="pager" />
</Fields>
</asp:DataPager>
<table>
<tr>
<td>
<table>
<asp:PlaceHolder runat="server" ID="groupPlaceHolder"></asp:PlaceHolder>
</table>
</td>
</tr>
</table>
</LayoutTemplate>
<GroupTemplate>
<tr>
<asp:PlaceHolder runat="server" ID="itemPlaceHolder"></asp:PlaceHolder>
</tr>
</GroupTemplate>
<ItemTemplate>
<td>
<asp:Literal ID="litAlbumName" runat="server"
Text='<%# Eval("AlbumName").ToString().Trim() %>' />
<br />
<asp:LinkButton ID="lnkView" runat="server" Text="View" CommandName="View"
CommandArgument='<%# Eval("AlbumId") %>'>
</asp:LinkButton>
|
<asp:LinkButton ID="lnkEdit" runat="server" Text="Edit" CommandName="Edit"
CommandArgument='<%# Eval("AlbumId") %>'>
</asp:LinkButton>
|
<asp:LinkButton ID="lnkDelete" runat="server" Text="Delete" CommandName="Delete"
CommandArgument='<%# Eval("AlbumId") %>'>
</asp:LinkButton>
<br />
<span>Songs:
<%# Eval("total") %></span>
</td>
</ItemTemplate>
</asp:ListView>
Here is the markup for the Panel:
<asp:Panel ID="pnlAlbum" runat="server" Visible="false">
<asp:ListBox ID="lstAvailableSongs" runat="server" SelectionMode="Multiple">
</asp:ListBox>
<asp:Button ID="btnAddAll" runat="server" Text="Add All" OnClick="btnAddAll_Click" />
<asp:Button ID="btnAdd" runat="server" Text="Add" OnClick="btnAdd_Click" />
<asp:Button ID="btnRemove" runat="server" Text="Remove" OnClick="btnRemove_Click" />
<asp:Button ID="btnRemoveAll" runat="server"
Text="Remove All"OnClick="btnRemoveAll_Click" />
<asp:ListBox ID="lstSelectedSongs" runat="server" SelectionMode="Multiple">
</asp:ListBox>
<asp:Button ID="btnCancel" runat="server" Text="Cancel" OnClick="btnCancel_Click" />
<asp:Button ID="btnEditAlbum" runat="server"Text="Save"
ValidationGroup="CreateAlbum" OnClick="btnEditAlbum_Click" />
<asp:Button ID="btnSaveAs" runat="server" Text="Save As" ValidationGroup="CreateAlbum"
OnClick="btnSaveAs_Click" />
</asp:Panel>
Here is some extra info:
I put an update panel around one of the listboxes in the panel and when I clicked the edit link under a listview item, I received the following error:
Microsoft JScript runtime error: Sys.InvalidOperationException: Could not find UpdatePanel with ID 'ctl00_ctl00_InnerContent_MainContent_UpdatePanel4'. If it is being updated dynamically then it must be inside another UpdatePanel.
Putting an UpdatePanel around the whole asp.net panel resolved the issue above, but I still get the Failed to load viewstate error when clicking on Cancel or Add, etc...
First off, you probably need to rebind the ListView after setting the EditIndex. (honestly, I haven't used ListView at all, but this is how the other repeater controls work) What does "EditAlbum()" do?
Your code is a little odd... why do you have the same controls in your EditItemTemplate as in the ItemTemplate? Ie, the Edit button should only be in the ItemTemplate... Then EditItemTemplate should have a Save or Cancel button.
Bottom line... your control tree is different on LoadViewState than it is when SaveViewState was called. One thing you can do is override these methods and then put a breakpoint there to manually look at the Controls collection in the debugger. You will probably see that the controls inside the ListView are different. But try my first suggestion before you do this.
Question for you:
in your Page_Load you have
Albums = AlbumCollection.GetAlbums(Common.GetUserName(), ddlAlbumType.SelectedIndex);
but in lvwAlbums_RowEditing(..) and in btnCancel_Click(...) you have
AlbumCollection.GetAlbums(Common.GetUserName(), ddlAlbumType.SelectedIndex);
shouldn't these be (Albums = ...)
Albums = AlbumCollection.GetAlbums(Common.GetUserName(), ddlAlbumType.SelectedIndex);
Related
<asp:DataList ID="DataListDziennik" runat="server"
DataSourceID="SqlDataSourcePrzedmioty">
<ItemTemplate>
<asp:Label ID="LabelPrzedmiot" runat="server" Text='<%# Eval("przedmiot") %>' />
...
<asp:DataList ID="DataListOceny" runat="server"
DataSourceID="SqlDataSourceOceny"
RepeatDirection="Horizontal"
OnItemCommand="DataListOceny_ItemCommandOceny"
OnEditCommand="DataListOceny_EditCommandOceny">
<EditItemTemplate>
<asp:TextBox ID="TextBoxOcena" runat="server" Text='<%# Bind("lista") %>' />
<td><asp:Button ID="ButtonZapisz" CommandName="Update" runat="server" Text="Zapisz" /></td>
</EditItemTemplate>
<ItemTemplate>
<asp:TextBox Width="20" ID="TextBoxOcena" ReadOnly="true" Text='<%# Eval("lista") %>' runat="server"></asp:TextBox>
<td><asp:Button ID="ButtonEdytuj" CommandName="Edit" runat="server" Text="Edytuj" /></td>
</ItemTemplate>
</asp:DataList>
</td>
</ItemTemplate>
When I write this in code behind:
protected void DataListOceny_EditCommand(object source, DataListCommandEventArgs e)
{
DataListOceny.EditItemIndex = e.Item.ItemIndex;
DataListOceny.DataBind();
}
Visual Studio tells me that DataListOceny does not exist in current content. I just want to be able edit items on DataListOceny after clicking the "edit" button, please give me full code in code behind part...
for edit DataListOceny .
What you asking is same like the below thread.. You need to find the DataListOceny Control on each row of DataListDziennik to bind it
Using FindControl() to find control
https://msdn.microsoft.com/en-us/library/486wc64h%28v=vs.110%29.aspx?f=255&MSPPError=-2147217396
And Here is some good example on the same
http://www.c-sharpcorner.com/UploadFile/rohatash/nested-datalist-in-Asp-Net/
http://surecode.net/DevCentre/NestedDataList/NestedDataList.aspx
I have a repeater with editable rows on the aspx page. The row has a textbox and a required field validator associated to it. On 'save' button click on that row, the required field valiator fires, It is tied to a validationsummary at the top of the page.
Now I have this panel below the repeater with a text box and a save button. This panel is 'opened' using the jquery show method on the click on a linkbutton at the top of this panel.
The required field validator is not firing for this texbox. I have a different validation summary for this textbox; as I need to trigger the validations on click on its save button only.
So I have the code like this,
<asp:ValidationSummary ID="validationSummary" ValidationGroup="ValidationGroup1" EnableClientScript="true" runat="server" />
<asp:ValidationSummary ID="validationSummary1" ValidationGroup="ValidationGroup2" EnableClientScript="true" runat="server" />
<asp:Repeater ID="Teams" runat="server" OnItemCommand="ItemCommand" OnItemDataBound="ItemDataBound">
<HeaderTemplate>
<table >
<tr>
<th>
<asp:Label ID="lbTeamNameHeader" runat="server" Text="TeamNameHeader"></asp:Label></th>
<th></th> </tr>
</HeaderTemplate>
<ItemTemplate>
<tr>
<td>
<asp:TextBox ID="txtTeamName" runat="server" Text='<%# DataBinder.Eval(Container.DataItem, "txtTeamName")%>' />
<asp:RequiredFieldValidator ID="reqdFieldValTeamName" ErrorMessage="Field cannot be blank" ValidationGroup="ValidationGroup1" runat="server" Display="None" ControlToValidate="txtTeamName"></asp:RequiredFieldValidator>
<asp:RegularExpressionValidator ID="regularExprTeamName" ErrorMessage="Invalid input for the team name" ValidationGroup="ValidationGroup1" Display="None" ControlToValidate="txtTeamName" runat="server" ValidationExpression="^[a-zA-Z0-9]+$"></asp:RegularExpressionValidator>
</td>
<td>
<asp:Panel ID="panelSave" runat="server" Visible="false">
<asp:LinkButton ID="linkbuttonSave" runat="server" CommandName="Save" ValidationGroup="ValidationGroup1" Text="SAVE" />
<asp:LinkButton ID="linkbuttonCancel" runat="server" CommandName="Cancel" Text="CANCEL" />
</asp:Panel>
</td>
</tr>
</ItemTemplate>
<FooterTemplate></table></FooterTemplate>
</asp:Repeater>
<asp:LinkButton ID="linkbuttonAddTeam" runat="server" Text="Add New Team" />
<div id="AddPanelDiv" style="display:none;">
<asp:TextBox ID="txtAddTeam" runat="server" />
<asp:RequiredFieldValidator ID="reqdFieldValAddTeam" ErrorMessage="Field cannot be blank" ValidationGroup="ValidationGroup2" runat="server" Display="None" ControlToValidate="txtAddTeam"></asp:RequiredFieldValidator>
<asp:RegularExpressionValidator ID="regularExprValAddTeam" ErrorMessage="Invalid format" ValidationGroup="ValidationGroup2" Display="None" ControlToValidate="txtAddTeam" runat="server" ValidationExpression="^[a-zA-Z0-9]+$"></asp:RegularExpressionValidator>
<asp:LinkButton ID="linkbuttonCancel" runat="server" Text="CANCEL"></asp:LinkButton>
<asp:LinkButton ID="linkbuttonSaveNewTeam" runat="server" OnClick="linkbuttonSaveNewTeam_OnClick" Text="SAVE" CausesValidation="true" />
</div>
Why on earth the validators for the bottom panel fire? On click of that save button, it straightaway goes to the page method onclick.
If I remove the validation group and click on the save in the repeater, it fires! But thats not what I want..
You are missing ValidationGroup="ValidationGroup2" on your second button it looks like.
<asp:LinkButton ID="linkbuttonSaveNewTeam" runat="server" OnClick="linkbuttonSaveNewTeam_OnClick"
Text="SAVE" CausesValidation="true" ValidationGroup="ValidationGroup2" />
I'm trying to get the original object back from a listview, when I click on the button.
I thought it was in e.Item.DataItem but that always seems to be null.
<form runat="server">
<asp:ListView ID="ListList" runat="server">
<ItemTemplate>
<asp:TextBox ID="tbCompanyName" runat="server" Text='<%# Eval("CompanyName") %>'></asp:TextBox>
<asp:TextBox ID="tbEmailAdress" runat="server" Text='<%# Eval("EmailAddres") %>'></asp:TextBox>
<asp:DropDownList ID="ddlAccountManagers" AutoPostBack="True" runat="server" />
<asp:Button runat="server" Text="Create or Update Account" CommandArgument='<%# Container.DataItem.ToString() %>' />
<br />
</ItemTemplate>
</asp:ListView>
</form>
private void ListList_ItemCommand(object sender, ListViewCommandEventArgs e)
{
}
You need to keep the original datasource in session and get the real values while clicking a button.
i am using a repeater control in asp.net and i want to use one more repeater control inside the existing repeater control.
Example:
<!-- start child repeater -->
<!-- end child repeater -->
use the following
<asp:Repeater ID="rp_resList" runat="server" >
<ItemTemplate>
<asp:HiddenField ID="hf_resID" runat="server" Value='<%# Eval("Id") %>' />
<asp:LinkButton ID="lnkResName" runat="server">Resource Name</asp:LinkButton>
<br />
<asp:Literal ID="litSummary" runat="server" Text='<%# Eval("summary") %>'></asp:Literal>
<br />
<asp:Repeater ID="rp_tagsSkill" runat="server">
<ItemTemplate>
<h6>
<%# Eval("Description") %></h6>
</ItemTemplate>
</asp:Repeater>
<div id="controls">
<asp:ImageButton ID="imgBtnBookmark" runat="server" />
<asp:Button ID="btnLike" runat="server" Text="Button" />
<asp:Literal ID="litComments" runat="server" Text="Comment (7)"></asp:Literal>
<asp:Button ID="btnShare" runat="server" Text="Button" />
</div>
</ItemTemplate>
</asp:Repeat>
in the you define your other repeter
and for more detail follow the following link nested Repeter
In your itemdatabound find your child repeater and bind it.
I have a ListView inside a FormView that, for some strange reason, doesn't fire neither the ItemInsert nor the ItemCommand event.
I'm populating the ListView with a generic list. I bind the list to the ListView on the OnPreRenderComplete.
<asp:ListView runat="server" ID="lvReferences" DataKeyNames="idReference" OnItemInserting="ContractReferences_Inserting" OnItemDeleting="ContractReferences_Deleting" InsertItemPosition="LastItem" OnItemCommand="ContractReferences_Command" OnItemCreated="ContractReferences_ItemDataBound">
<LayoutTemplate>
<ul>
<asp:PlaceHolder ID="itemPlaceholder" runat="server" />
</ul>
</LayoutTemplate>
<ItemTemplate>
<li class="obsItem">
<asp:TextBox ID="valRef" runat="server" Width="5px" Enabled="false" Text='<%#Bind("idProcessRecordRef") %>' />
<asp:TextBox id="txtRef" runat="server" Text='<%#Bind("description") %>' />
<asp:ImageButton ID="btDelete" runat="server" CommandName="Delete" ImageUrl="~/_layouts/web.commons/Images/eliminar.png" />
</li>
</ItemTemplate>
<InsertItemTemplate>
<li class="obsItem">
<asp:TextBox ID="valRef" runat="server" Width="5px" Enabled="false" />
<asp:TextBox id="txtRef" runat="server" />
<asp:ImageButton ID="btDetail" CausesValidation="false" OnClientClick="javascript:openPopup();return false;" runat="server" ImageUrl="~/_layouts/web.commons/Images/novo.png" />
<asp:ImageButton ID="btSaveDs" runat="server" CommmandName="Insert" CausesValidation="false" ImageUrl="~/_layouts/web.commons/Images/gravarObs.png" />
</li>
</InsertItemTemplate>
</asp:ListView>
My ItemDataBound method is:
protected void ContractReferences_ItemDataBound(object sender, ListViewItemEventArgs e)
{
if (!IsPostBack)
{
TextBox valRef = e.Item.FindControl("valRef") as TextBox;
TextBox txtRef = e.Item.FindControl("txtRef") as TextBox;
ScriptManager.RegisterStartupScript(this, this.GetType(), "popup", "function openPopup(){ window.open('ContractPicker.aspx?c1=" + valRef.ClientID + "&c2=" + txtRef.ClientID + "');}", true);
}
}
So, basically, in the InsertItemTemplate I put a button that opens a LOV and populates my valRef and txtRef fields. I had to put a "return false" in order for the parent page to not postback (and I think the problem lies here...).
Then, when I click in the ImageButton with the CommandName="Insert", instead of firing the ItemCommand event, it enters once again in the ItemDataBound handler.
So, any ideas?
Thanks!
Well, after searching for a few days, I found out this is a known bug.
http://connect.microsoft.com/VisualStudio/feedback/details/328680/problem-accessing-controls-clientid-on-asp-net-listviews-itemcreated
So, it hasn't nothing to do with the popup, but with the ListView and the ItemDataBound itself. I put the ItemDataBound logic on the OnLoad (using a recursive FindControl), and it worked.
So, in the ItemDataBound, the ClientID of my controls is "wrong".
Stupid bug really...