I'm using the code below to read a text file that contains foreign characters, the file is encoded ANSI and looks fine in notepad. The code below doesn't work, when the file values are read and shown in the datagrid the characters appear as squares, could there be another problem elsewhere?
StreamReader reader = new StreamReader(inputFilePath, System.Text.Encoding.ANSI);
using (reader = File.OpenText(inputFilePath))
Thanks
Update 1: I have tried all encodings found under System.Text.Encoding. and all fail to show the file correctly.
Update 2: I've changed the file encoding (resaved the file) to unicode and used System.Text.Encoding.Unicode and it worked just fine. So why did notepad read it correctly? And why didn't System.Text.Encoding.Unicode read the ANSI file?
You may also try the Default encoding, which uses the current system's ANSI codepage.
StreamReader reader = new StreamReader(inputFilePath, Encoding.Default, true)
When you try using the Notepad "Save As" menu with the original file, look at the encoding combo box. It will tell you which encoding notepad guessed is used by the file.
Also, if it is an ANSI file, the detectEncodingFromByteOrderMarks parameter will probably not help much.
I had the same problem and my solution was simple: instead of
Encoding.ASCII
use
Encoding.GetEncoding("iso-8859-1")
The answer was found here.
Edit: more solutions. This maybe more accurate one:
Encoding.GetEncoding(1252);
Also, in some cases this will work for you too if your OS default encoding matches file encoding:
Encoding.Default;
Yes, it could be with the actual encoding of the file, probably unicode. Try UTF-8 as that is the most common form of unicode encoding. Otherwise if the file ASCII then standard ASCII encoding should work.
Using Encoding.Unicode won't accurately decode an ANSI file in the same way that a JPEG decoder won't understand a GIF file.
I'm surprised that Encoding.Default didn't work for the ANSI file if it really was ANSI - if you ever find out exactly which code page Notepad was using, you could use Encoding.GetEncoding(int).
In general, where possible I'd recommend using UTF-8.
Try a different encoding such as Encoding.UTF8. You can also try letting StreamReader find the encoding itself:
StreamReader reader = new StreamReader(inputFilePath, System.Text.Encoding.UTF8, true)
Edit: Just saw your update. Try letting StreamReader do the guessing.
For swedish Å Ä Ö the only solution form the ones above working was:
Encoding.GetEncoding("iso-8859-1")
Hopefully this will save someone time.
File.OpenText() always uses an UTF-8 StreamReader implicitly. Create your own StreamReader
instance instead and specify the desired encoding.
like
using (StreamReader reader = new StreamReader(#"C:\test.txt", Encoding.Default)
{
// ...
}
I solved my problem of reading portuguese characters, changing the source file on notepad++.
C#
var url = System.Web.HttpContext.Current.Server.MapPath(#"~/Content/data.json");
string s = string.Empty;
using (System.IO.StreamReader sr = new System.IO.StreamReader(url, System.Text.Encoding.UTF8,true))
{
s = sr.ReadToEnd();
}
I'm also reading an exported file which contains french and German languages. I used Encoding.GetEncoding("iso-8859-1"), true which worked out without any challenges.
for Arabic, I used Encoding.GetEncoding(1256). it is working good.
I had a similar problem with ProcessStartInfo and the property StandardOutputEncoding. I set it for German language console output to code page 850. This way I could read the output like ausführen instead of ausf�hren.
Related
I need to open a .prn file and replace some strings.
In the .prn file I included an image, that has a string like this:
When I open the .prn file, C# is not able to read the string as it is.
Probably, it misses some encoding, but not sure which one.
I tried different encodings, but without success.
Here is the code that opens the file in read mode:
string text = File.ReadAllText(root + #"testImage.prn");
c# reads that string in this way
and i'm not able to print the file with the image included.
Thanks in advance for your help.
Most PRN files contain ISO encoding. So, try using ISO encoding and read the file using System.IO.StreamReader with explicitly specifying the desired encoding.
The following example worked perfectly in my case:
System.Text.Encoding encoding = System.Text.Encoding.GetEncoding("ISO-8859-1");
string text;
using (System.IO.StreamReader sr = new System.IO.StreamReader(path, encoding))
{
text = sr.ReadToEnd();
}
In Java, it worked this way for me: Using Stream and charset ISO-8859-1.
Stream<String> stream = Files.lines(Paths.get(filePath), Charset.forName("ISO-8859-1"));
I've been trying this for quite a while now, but can't figure it out. I'm trying to export data to Excel via a *.csv file. It works great so far, but I have some encoding problems when opening the files in Excel.
(original string on the left, EXCEL result on the right):
Messwert(µm / m) ==> Messwert(µm / m)
Dümme Mässöng ==> Dümme Mässöng
Notepad++ tells me that the file is encoded "ANSI as UTF8"(WTF?)
So here are different ways I tried to get a valid result:
obvious implementation:
tWriter.Write(";Messwert(µm /m)");
more sophisticated one (tried probably a dozen or more encoding combinations:)
tWriter.Write(Encoding.Default.GetString(Encoding.Unicode.GetBytes(";Messwert(µm /m)")));
tWriter.Write(Encoding.ASCII.GetString(Encoding.Unicode.GetBytes(";Messwert(µm /m)")));
and so on
Whole source code for the method creating the data:
MemoryStream tStream = new MemoryStream();
StreamWriter tWriter = new StreamWriter(tStream);
tWriter.Write("\uFEFF");
tWriter.WriteLine(string.Format("{0}", aMeasurement.Name));
tWriter.WriteLine(aMeasurement.Comment);
tWriter.WriteLine();
tWriter.WriteLine("Zeit in Minuten;Messwert(µm / m)");
TimeSpan tSpan;
foreach (IMeasuringPoint tPoint in aMeasurement)
{
tSpan = new TimeSpan(tPoint.Time - aMeasurement[0].Time);
tWriter.WriteLine(string.Format("{0};{1};", (int)tSpan.TotalMinutes, getMPString(tPoint)));
}
tWriter.Flush();
return tStream;
Generated CSV file:
Dümme Mössäng
Testmessung die erste
Zeit in Minuten;Messwert(µm / m)
0;-703;
0;-381;
1;1039;
1;1045;
2;1457;
2;1045;
This worked perfect for me:
private const int WIN_1252_CP = 1252; // Windows ANSI codepage 1252
this._writer = new StreamWriter(fileName, false, Encoding.GetEncoding(WIN_1252_CP));
CSV encoding issues (Microsoft Excel)
try the following:
using (var sw = File.Create(Path.Combine(txtPath.Text, "UTF8.csv")))
{
var preamble = Encoding.UTF8.GetPreamble();
sw.Write(preamble, 0, preamble.Length);
var data = Encoding.UTF8.GetBytes("懘荧,\"Hello\",text");
sw.Write(data, 0, data.Length);
}
It writes the proper UTF8 preamble to the file before writing the UTF8 encoded CSV.
This solution is written up as a fix for a Java application however you should be able to do something similar in C#. You may also want to look at the documentation on the StreamWriter class, in the remarks it refers to the Byte Order Mark (BOM).
"ANSI as UTF8"(WTF?)
NotePad++ is probably correct. The encoding is UTF8 (i.e., correct Unicode header), but only contains ANSI data (i.e., é is not encoded in correct UTF8 way, which would mean two bytes).
Or: it is the other way around. It is ANSI (no file header BOM), but the encoding of the individual characters is, or looks like, UTF8. This would explain the ü and other characters expanding in more than one other character. You can fix this by forcing the file to be read as Unicode.
If it's possible to post (part of) your CSV, we may be able to help fixing it at the source.
Edit
Now that we've seen your code: can you remove the StreamWriter and replace it with a TextWriter? Also, remove the hand-encoding of the BOM, it is not necessary. When you create a TextWriter, you can specify the encoding (don't use ASCII, try UTF8).
Trevor Germain's helped me to save in the correct encoded format
using (var sw = File.Create(Path.Combine(txtPath.Text, "UTF8.csv")))
{
var preamble = Encoding.UTF8.GetPreamble();
sw.Write(preamble, 0, preamble.Length);
var data = Encoding.UTF8.GetBytes("懘荧,\"Hello\",text");
sw.Write(data, 0, data.Length);
}
I'd suggest you open up the text file in a hex editor, and see what it really is. The BOM for UTF-16 is 0xFEFF, which the writing code is apparently writing to the stream - but the rest of the writing doesn't specify an encoding to use - it would use the default encoding of the StreamWriter, which is UTF-8. There appears to be a mix up of encodings.
When you pop open the file in hex view, if you see lots of 0x00 between the characters, you're working with UTF-16, which is Encoding.Unicode in C#. If there are no 0x00 between chars, the encoding is probably UTF-8.
If the latter case, just fix up the BOM to be EF BB BF rather than FE FF, and read normally with UTF-8 encoding.
For my scenario using StreamWriter I found explicitly passing UTF8 encoding to the StreamWriter enabled excel to read the file using the correct encoding.
See this answer for more details:
https://stackoverflow.com/a/22306937/999048
I have been having issues reading a file that contains a mix of Arabic and Western text. I read the file into a TextBox as follows:
tbx1.Text = File.ReadAllText(fileName.Text, Encoding.UTF8);
No matter what value I tried instead of "Encoding.UTF8" I got garbled characters displayed in place of the Arabic. The western text was displayed fine.
I thought it might have been an issue with the way the TextBox was defined, but on start up I write some mixed Western/Arabic text to the textbox and this displays fine:
tbx1.Text = "Start السلا عليكم" + Environment.NewLine + "Here";
Then I opened Notepad and copied the above text into it, then saved the file, at which point Notepad save dialogue asked for which encoding to use.
I then presented the saved file to my code and it displayed all the content correctly.
I examined the file and found 3 binary bytes at the beginning (not visible in Notepad):
The 3 bytes, I subsequently found through research represent the BOM, and this enables the C# "File.ReadAllText(fileName.Text, Encoding.UTF8);" to read/display the data as desired.
What puzzles me is specifying the " Encoding.UTF8" value should take care of this.
The only way I can think is to code up a step to add this data to a copy of teh file, then process that file. But this seems rather long-winded. Just wondering if there is a better way to do, or why the Encoding.UTF8 is not yielding the desired result.
Edit:
Still no luck despite trying the suggestion in the answer.
I cut the test data down to containing just Arabic as follows:
Code as follows:
FileStream fs = new FileStream(fileName.Text, FileMode.Open);
StreamReader sr = new StreamReader(fs, Encoding.UTF8, false);
tbx1.Text = sr.ReadToEnd();
sr.Close();
fs.Close();
Tried with both "true" and "false" on the 2nd line, but both give the same result.
If I open the file in Notepad++, and specify the Arabic ISO-8859-6 Character set it displays fine.
Here is what is looks like in Notepad++ (and what I would liek the textbox to display):
Not sure if the issue is in the reading from file, or the writing to the textbox.
I will try inspecting the data post read to see. But at the moment, I'm puzzled.
The StreamReader class has a constructor that will take care of testing for the BOM for you:
using (var stream = new FileStream(fileName.Text, FileAccess.Read))
{
using (var sr = new StreamReader(stream, Encoding.UTF8, true))
{
var text = sr.ReadToEnd();
}
}
The final true parameter is detectEncodingFromByteOrderMark:
The detectEncodingFromByteOrderMarks parameter detects the encoding by looking at the first three bytes of the stream. It automatically recognizes:
UTF-8
little-endian Unicode
and big-endian Unicode text
if the file
starts with the appropriate byte order marks. Otherwise, the
user-provided encoding is used. See the Encoding.GetPreamble method
for more information.
I'm not full certain I understand file encoding completely. If I write out text to a file in c#, how can I set the encoding type of that file? Maybe it's just I do not understand the full spectrum of file encoding.
using (var sw = new StreamWriter(File.Open(#"c:\test.txt", FileMode.CreateNew), Encoding.GetEncoding("iso-8859-1")))
{
sw.WriteLine("my text...");
}
Your code does exactly that - you're writing out text using ISO Latin 1.
Note that there's nothing in the file itself to specify the encoding, unless you're writing out a file which allows you to specify that. The file is basically just a sequence of bytes. The encoding you're specifying in your code determines how the text you're writing is converted into bytes, that's all.
Use the constructor that accepts an Encoding parameter, which you already do, and set the encoding to the one you like.
Something like this
using (var sw = new StreamWriter(fileName, true, System.Text.Encoding.UTF8,512);
{
sw.WriteLine(""text here);
}
I've been trying this for quite a while now, but can't figure it out. I'm trying to export data to Excel via a *.csv file. It works great so far, but I have some encoding problems when opening the files in Excel.
(original string on the left, EXCEL result on the right):
Messwert(µm / m) ==> Messwert(µm / m)
Dümme Mässöng ==> Dümme Mässöng
Notepad++ tells me that the file is encoded "ANSI as UTF8"(WTF?)
So here are different ways I tried to get a valid result:
obvious implementation:
tWriter.Write(";Messwert(µm /m)");
more sophisticated one (tried probably a dozen or more encoding combinations:)
tWriter.Write(Encoding.Default.GetString(Encoding.Unicode.GetBytes(";Messwert(µm /m)")));
tWriter.Write(Encoding.ASCII.GetString(Encoding.Unicode.GetBytes(";Messwert(µm /m)")));
and so on
Whole source code for the method creating the data:
MemoryStream tStream = new MemoryStream();
StreamWriter tWriter = new StreamWriter(tStream);
tWriter.Write("\uFEFF");
tWriter.WriteLine(string.Format("{0}", aMeasurement.Name));
tWriter.WriteLine(aMeasurement.Comment);
tWriter.WriteLine();
tWriter.WriteLine("Zeit in Minuten;Messwert(µm / m)");
TimeSpan tSpan;
foreach (IMeasuringPoint tPoint in aMeasurement)
{
tSpan = new TimeSpan(tPoint.Time - aMeasurement[0].Time);
tWriter.WriteLine(string.Format("{0};{1};", (int)tSpan.TotalMinutes, getMPString(tPoint)));
}
tWriter.Flush();
return tStream;
Generated CSV file:
Dümme Mössäng
Testmessung die erste
Zeit in Minuten;Messwert(µm / m)
0;-703;
0;-381;
1;1039;
1;1045;
2;1457;
2;1045;
This worked perfect for me:
private const int WIN_1252_CP = 1252; // Windows ANSI codepage 1252
this._writer = new StreamWriter(fileName, false, Encoding.GetEncoding(WIN_1252_CP));
CSV encoding issues (Microsoft Excel)
try the following:
using (var sw = File.Create(Path.Combine(txtPath.Text, "UTF8.csv")))
{
var preamble = Encoding.UTF8.GetPreamble();
sw.Write(preamble, 0, preamble.Length);
var data = Encoding.UTF8.GetBytes("懘荧,\"Hello\",text");
sw.Write(data, 0, data.Length);
}
It writes the proper UTF8 preamble to the file before writing the UTF8 encoded CSV.
This solution is written up as a fix for a Java application however you should be able to do something similar in C#. You may also want to look at the documentation on the StreamWriter class, in the remarks it refers to the Byte Order Mark (BOM).
"ANSI as UTF8"(WTF?)
NotePad++ is probably correct. The encoding is UTF8 (i.e., correct Unicode header), but only contains ANSI data (i.e., é is not encoded in correct UTF8 way, which would mean two bytes).
Or: it is the other way around. It is ANSI (no file header BOM), but the encoding of the individual characters is, or looks like, UTF8. This would explain the ü and other characters expanding in more than one other character. You can fix this by forcing the file to be read as Unicode.
If it's possible to post (part of) your CSV, we may be able to help fixing it at the source.
Edit
Now that we've seen your code: can you remove the StreamWriter and replace it with a TextWriter? Also, remove the hand-encoding of the BOM, it is not necessary. When you create a TextWriter, you can specify the encoding (don't use ASCII, try UTF8).
Trevor Germain's helped me to save in the correct encoded format
using (var sw = File.Create(Path.Combine(txtPath.Text, "UTF8.csv")))
{
var preamble = Encoding.UTF8.GetPreamble();
sw.Write(preamble, 0, preamble.Length);
var data = Encoding.UTF8.GetBytes("懘荧,\"Hello\",text");
sw.Write(data, 0, data.Length);
}
I'd suggest you open up the text file in a hex editor, and see what it really is. The BOM for UTF-16 is 0xFEFF, which the writing code is apparently writing to the stream - but the rest of the writing doesn't specify an encoding to use - it would use the default encoding of the StreamWriter, which is UTF-8. There appears to be a mix up of encodings.
When you pop open the file in hex view, if you see lots of 0x00 between the characters, you're working with UTF-16, which is Encoding.Unicode in C#. If there are no 0x00 between chars, the encoding is probably UTF-8.
If the latter case, just fix up the BOM to be EF BB BF rather than FE FF, and read normally with UTF-8 encoding.
For my scenario using StreamWriter I found explicitly passing UTF8 encoding to the StreamWriter enabled excel to read the file using the correct encoding.
See this answer for more details:
https://stackoverflow.com/a/22306937/999048