how to run a winform from console application?

how to run a winform from console application? - c#

How do I create, execute and control a winform from within a console application?

The easiest option is to start a windows forms project, then change the output-type to Console Application. Alternatively, just add a reference to System.Windows.Forms.dll, and start coding:
using System.Windows.Forms;
[STAThread]
static void Main() {
Application.EnableVisualStyles();
Application.Run(new Form()); // or whatever
}
The important bit is the [STAThread] on your Main() method, required for full COM support.

I recently wanted to do this and found that I was not happy with any of the answers here.
If you follow Marc's advice and set the output-type to Console Application there are two problems:
1) If you launch the application from Explorer, you get an annoying console window behind your Form which doesn't go away until your program exits. We can mitigate this problem by calling FreeConsole prior to showing the GUI (Application.Run). The annoyance here is that the console window still appears. It immediately goes away, but is there for a moment none-the-less.
2) If you launch it from a console, and display a GUI, the console is blocked until the GUI exits. This is because the console (cmd.exe) thinks it should launch Console apps synchronously and Windows apps asynchronously (the unix equivalent of "myprocess &").
If you leave the output-type as Windows Application, but correctly call AttachConsole, you don't get a second console window when invoked from a console and you don't get the unnecessary console when invoked from Explorer. The correct way to call AttachConsole is to pass -1 to it. This causes our process to attach to the console of our parent process (the console window that launched us).
However, this has two different problems:
1) Because the console launches Windows apps in the background, it immediately displays the prompt and allows further input. On the one hand this is good news, the console is not blocked on your GUI app, but in the case where you want to dump output to the console and never show the GUI, your program's output comes after the prompt and no new prompt is displayed when you're done. This looks a bit confusing, not to mention that your "console app" is running in the background and the user is free to execute other commands while it's running.
2) Stream redirection gets messed up as well, e.g. "myapp some parameters > somefile" fails to redirect. The stream redirection problem requires a significant amount of p/Invoke to fixup the standard handles, but it is solvable.
After many hours of hunting and experimenting, I've come to the conclusion that there is no way to do this perfectly. You simply cannot get all the benefits of both console and window without any side effects. It's a matter of picking which side effects are least annoying for your application's purposes.

Here is the best method that I've found:
First, set your projects output type to "Windows Application", then P/Invoke AllocConsole to create a console window.
internal static class NativeMethods
{
[DllImport("kernel32.dll")]
internal static extern Boolean AllocConsole();
}
static class Program
{
static void Main(string[] args) {
if (args.Length == 0) {
// run as windows app
Application.EnableVisualStyles();
Application.Run(new Form1());
} else {
// run as console app
NativeMethods.AllocConsole();
Console.WriteLine("Hello World");
Console.ReadLine();
}
}
}

It´s very simple to do:
Just add following attribute and code to your Main-method:
[STAThread]
void Main(string[] args])
{
Application.EnableVisualStyles();
//Do some stuff...
while(!Exit)
{
Application.DoEvents(); //Now if you call "form.Show()" your form won´t be frozen
//Do your stuff
}
}
Now you´re fully able to show WinForms :)

You can create a winform project in VS2005/ VS2008 and then change its properties to be a command line application. It can then be started from the command line, but will still open a winform.

All the above answers are great help, but I thought to add some more tips for the absolute beginner.
So, you want to do something with Windows Forms, in a Console Application:
Add a reference to System.Windows.Forms.dll in your Console application project in Solution Explorer. (Right Click on Solution-name->add->Reference...)
Specify the name space in code: using System.Windows.Forms;
Declare the needed properties in your class for the controls you wish to add to the form.
e.g. int Left { get; set; } // need to specify the LEFT position of the button on the Form
And then add the following code snippet in Main():
static void Main(string[] args)
{
Application.EnableVisualStyles();
Form frm = new Form(); // create aForm object
Button btn = new Button()
{
Left = 120,
Width = 130,
Height = 30,
Top = 150,
Text = "Biju Joseph, Redmond, WA"
};
//… more code
frm.Controls.Add(btn); // add button to the Form
// …. add more code here as needed
frm.ShowDialog(); // a modal dialog
}

This worked for my needs...
Task mytask = Task.Run(() =>
{
MyForm form = new MyForm();
form.ShowDialog();
});
This starts the from in a new thread and does not release the thread until the form is closed. Task is in .Net 4 and later.

You should be able to use the Application class in the same way as Winform apps do. Probably the easiest way to start a new project is to do what Marc suggested: create a new Winform project, and then change it in the options to a console application

Its totally depends upon your choice, that how you are implementing.
a. Attached process , ex: input on form and print on console
b. Independent process, ex: start a timer, don't close even if console exit.
for a,
Application.Run(new Form1());
//or -------------
Form1 f = new Form1();
f.ShowDialog();
for b,
Use thread, or task anything,
How to open win form independently?

If you want to escape from Form Freeze and use editing (like text for a button) use this code
Form form = new Form();
Form.Button.Text = "randomText";
System.Windows.Forms.Application.EnableVisualStyles();
System.Windows.Forms.Application.Run(form);

Related

winforms output to commandline

I have a winforms application. I would like to run the .exe from the commandline and redirect the output from one of the output textboxes to the commandline. I don't want to launch the winform application just run the logic in the background.
I tried the advice from this thread
C# application both GUI and commandline
but I didn't see any of my console.writeline messages in the command line in cmd.exe when I ran the application via the cmd.exe. Can anyone guide me as to what I might be doing wrong?
I have an if statement that did this logic:
if(args.Length >0)
{
Console.writeline("this has arguments");
new Mainform();
}
else
{
Application.EnableVisualStyles();
Application.Run(new MainForm());
}
The else part still works. But nothing happens in the if part either using the cmd.exe to run the application or when I use the properties ->debug->command line arguments and give it arguments to run while debugging it. I have no idea what I am doing wrong.

I think you created your Windows Forms project and pasted the code? If so, it couldn't work. You have to create your Console project and here is the code I've tested, works like a charm except that when the Form is shown (GUI mode) the Console is still there, closing that Console will also close your Form:
class Program
{
static void Main(string[] args)
{
if (args.Length == 0)
{
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new Form1());
}
else //Process command lines
{
Console.WriteLine("Please enter some command.");
string cmd = Console.ReadLine();
Console.WriteLine("You entered: " + cmd);
}
}
}
Because the Console project doesn't add reference to System.Windows.Forms.dll automatically for you, so you have to do that manually to be able to create your form in that Console project. The point is that you applied the code in a Winforms project while it should be in a Console project. There is only a way I know which can show a Console window in a winforms application is running the cmd.exe but that will show a new Console window than the existing one which you are using to run your application.

Changing the content of a form from outside?

I've got a form called MyForm, and I want to edit it's properties in the middle of the program's execution, from outside of the class itself.
Here's what I got:
static void Main()
{
MyForm main = new MyForm();
main.ShowDialog();
main.Text = "Hello";
}
However, it seems like ShowDialog() just freezes the program until I close the form, so main.Text = "Hello"; won't be executed until I close the form.
I've also tried using main.Show() but it just closes the form after I've executed all the code in my Main() function, so the text "Hello" will only flash quickly.
I would need it so that I can have the form open at all times and change it's controls in the middle of the program's execution, from outside of the class itself.
How can I achieve this? Should I run the form in a different thread or something?

There are multiple questions here, you should try to focus on one at a time, so let me highlight the questions.
Why does my program close when Main exits?
How can I avoid "freezing" the program when showing a form?
How can I access the contents of a form from elsewhere?
Answers:
That's the design of how the lifetime of a program is. When the main thread (running the Main method) terminates, the program closes. Any open forms are closed in the process. Solution is to not allow Main to exit, typically by using Application.Run(main); in your case, showing the form and waiting for it to close.
You use Show and not ShowDialog, but since you have no other form keeping the program open, your program closes. Show returns after showing the form, returning to whatever the program was doing. In your case, the program has nothing left to do, so it terminates.
You need to store a reference to your form somewhere the rest of your program can access it, you can use a static field/property somewhere, or you can pass the form around to the various parts that need it.

First of all, I don't know what is your specific scenario. Perhaps my solution is good for you, but if it isn't, please, try to tell us what exactly are you trying to achieve.
static void Main()
{
var main = new MyForm();
//Initialize a new thread with the `DoSomething()` method
//and pass the form as a parameter
var thread = new Thread(() => DoSomething(main)) {IsBackground = true};
thread.Start();
main.ShowDialog();
}
static void DoSomething(MyForm main) {
//Update the form title
main.Text = "Hello";
//Wait one second
Thread.Sleep(1000);
//Update the form title again
main.Text = "World";
}

Capture keystroke without focus in console

I know there is a question for Windows Forms but it doesn't work in the console, or at least I couldn't get it to work. I need to capture key presses even though the console doesn't have focus.

You can create a global keyboard hook in a console application, too.
Here's complete, working code:
https://learn.microsoft.com/en-us/archive/blogs/toub/low-level-keyboard-hook-in-c
You create a console application, but must add a reference to System.Windows.Forms for this to work. There's no reason a console app can't reference that dll.
I just created a console app using this code and verified that it gets each key pressed, whether or not the console app has the focus.
EDIT
The main thread will run Application.Run() until the application exits, e.g. via a call to Application.Exit(). The simplest way to do other work is to start a new Task to perform that work. Here's a modified version of Main() from the linked code that does this
public static void Main()
{
var doWork = Task.Run(() =>
{
for (int i = 0; i < 20; i++)
{
Console.WriteLine(i);
Thread.Sleep(1000);
}
Application.Exit(); // Quick exit for demonstration only.
});
_hookID = SetHook(_proc);
Application.Run();
UnhookWindowsHookEx(_hookID);
}
NOTE
Possibly provide a means to exit the Console app, e.g. when a special key combo is pressed depending on your specific needs. In the

C# Windows application that doesn't fork (or Console Application with no console window) [duplicate]

I want to make a C# program that can be run as a CLI or GUI application depending on what flags are passed into it. Can this be done?
I have found these related questions, but they don't exactly cover my situation:
How to write to the console in a GUI application
How do I get console output in C++ with a Windows program?

Jdigital's answer points to Raymond Chen's blog, which explains why you can't have an application that's both a console program and a non-console* program: The OS needs to know before the program starts running which subsystem to use. Once the program has started running, it's too late to go back and request the other mode.
Cade's answer points to an article about running a .Net WinForms application with a console. It uses the technique of calling AttachConsole after the program starts running. This has the effect of allowing the program to write back to the console window of the command prompt that started the program. But the comments in that article point out what I consider to be a fatal flaw: The child process doesn't really control the console. The console continues accepting input on behalf of the parent process, and the parent process is not aware that it should wait for the child to finish running before using the console for other things.
Chen's article points to an article by Junfeng Zhang that explains a couple of other techniques.
The first is what devenv uses. It works by actually having two programs. One is devenv.exe, which is the main GUI program, and the other is devenv.com, which handles console-mode tasks, but if it's used in a non-console-like manner, it forwards its tasks to devenv.exe and exits. The technique relies on the Win32 rule that com files get chosen ahead of exe files when you type a command without the file extension.
There's a simpler variation on this that the Windows Script Host does. It provides two completely separate binaries, wscript.exe and cscript.exe. Likewise, Java provides java.exe for console programs and javaw.exe for non-console programs.
Junfeng's second technique is what ildasm uses. He quotes the process that ildasm's author went through when making it run in both modes. Ultimately, here's what it does:
The program is marked as a console-mode binary, so it always starts out with a console. This allows input and output redirection to work as normal.
If the program has no console-mode command-line parameters, it re-launches itself.
It's not enough to simply call FreeConsole to make the first instance cease to be a console program. That's because the process that started the program, cmd.exe, "knows" that it started a console-mode program and is waiting for the program to stop running. Calling FreeConsole would make ildasm stop using the console, but it wouldn't make the parent process start using the console.
So the first instance restarts itself (with an extra command-line parameter, I suppose). When you call CreateProcess, there are two different flags to try, DETACHED_PROCESS and CREATE_NEW_CONSOLE, either of which will ensure that the second instance will not be attached to the parent console. After that, the first instance can terminate and allow the command prompt to resume processing commands.
The side effect of this technique is that when you start the program from a GUI interface, there will still be a console. It will flash on the screen momentarily and then disappear.
The part in Junfeng's article about using editbin to change the program's console-mode flag is a red herring, I think. Your compiler or development environment should provide a setting or option to control which kind of binary it creates. There should be no need to modify anything afterward.
The bottom line, then, is that you can either have two binaries, or you can have a momentary flicker of a console window. Once you decide which is the lesser evil, you have your choice of implementations.
* I say non-console instead of GUI because otherwise it's a false dichotomy. Just because a program doesn't have a console doesn't mean it has a GUI. A service application is a prime example. Also, a program can have a console and windows.

Check out Raymond's blog on this topic:
https://devblogs.microsoft.com/oldnewthing/20090101-00/?p=19643
His first sentence: "You can't, but you can try to fake it."

http://www.csharp411.com/console-output-from-winforms-application/
Just check the command line arguments before the WinForms Application. stuff.
I should add that in .NET it is RIDICULOUSLY easy to simply make a console and GUI projects in the same solution which share all their assemblies except main. And in this case, you could make the command line version simply launch the GUI version if it is launched with no parameters. You would get a flashing console.

There is an easy way to do what you want. I'm always using it when writing apps that should have both a CLI and a GUI. You have to set your "OutputType" to "ConsoleApplication" for this to work.
class Program {
[DllImport("kernel32.dll", EntryPoint = "GetConsoleWindow")]
private static extern IntPtr _GetConsoleWindow();
/// <summary>
/// The main entry point for the application.
/// </summary>
[STAThread]
static void Main(string[] args) {
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
/*
* This works as following:
* First we look for command line parameters and if there are any of them present, we run the CLI version.
* If there are no parameters, we try to find out if we are run inside a console and if so, we spawn a new copy of ourselves without a console.
* If there is no console at all, we show the GUI.
* We make an exception if we find out, that we're running inside visual studio to allow for easier debugging the GUI part.
* This way we're both a CLI and a GUI.
*/
if (args != null && args.Length > 0) {
// execute CLI - at least this is what I call, passing the given args.
// Change this call to match your program.
CLI.ParseCommandLineArguments(args);
} else {
var consoleHandle = _GetConsoleWindow();
// run GUI
if (consoleHandle == IntPtr.Zero || AppDomain.CurrentDomain.FriendlyName.Contains(".vshost"))
// we either have no console window or we're started from within visual studio
// This is the form I usually run. Change it to match your code.
Application.Run(new MainForm());
else {
// we found a console attached to us, so restart ourselves without one
Process.Start(new ProcessStartInfo(Assembly.GetEntryAssembly().Location) {
CreateNoWindow = true,
UseShellExecute = false
});
}
}
}

I think the preferred technique is what Rob called the devenv technique of using two executables: a launcher ".com" and the original ".exe". This is not that tricky to use if you have the boilerplate code to work with (see below link).
The technique uses tricks to have that ".com" be a proxy for the stdin/stdout/stderr and launch the same-named .exe file. This give the behavior of allowing the program to preform in a command line mode when called form a console (potentially only when certain command-line arguments are detected) while still being able to launch as a GUI application free of a console.
I hosted a project called dualsubsystem on Google Code that updates an old codeguru solution of this technique and provides the source code and working example binaries.

Here is what I believe to be the simple .NET C# solution to the problem. Just to restate the problem, when you run the console "version" of the app from a command line with a switch, the console keeps waiting (it doesn't return to the command prompt and the process keeps running) even if you have an Environment.Exit(0) at the end of your code. To fix this, just before calling Environment.Exit(0), call this:
SendKeys.SendWait("{ENTER}");
Then the console gets the final Enter key it needs to return to the command prompt and the process ends. Note: Don't call SendKeys.Send(), or the app will crash.
It's still necessary to call AttachConsole() as mentioned in many posts, but with this I get no command window flicker when launching the WinForm version of the app.
Here's the entire code in a sample app I created (without the WinForms code):
using System;
using System.Windows.Forms;
using System.Runtime.InteropServices;
namespace ConsoleWriter
{
static class Program
{
[DllImport("kernel32.dll")]
private static extern bool AttachConsole(int dwProcessId);
private const int ATTACH_PARENT_PROCESS = -1;
[STAThread]
static void Main(string[] args)
{
if(args.Length > 0 && args[0].ToUpperInvariant() == "/NOGUI")
{
AttachConsole(ATTACH_PARENT_PROCESS);
Console.WriteLine(Environment.NewLine + "This line prints on console.");
Console.WriteLine("Exiting...");
SendKeys.SendWait("{ENTER}");
Environment.Exit(0);
}
else
{
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new Form1());
}
}
}
}
Hope it helps someone from also spending days on this problem. Thanks for the hint go to #dantill.

/*
** dual.c Runs as both CONSOLE and GUI app in Windows.
**
** This solution is based on the "Momentary Flicker" solution that Robert Kennedy
** discusses in the highest-rated answer (as of Jan 2013), i.e. the one drawback
** is that the console window will briefly flash up when run as a GUI. If you
** want to avoid this, you can create a shortcut to the executable and tell the
** short cut to run minimized. That will minimize the console window (which then
** immediately quits), but not the GUI window. If you want the GUI window to
** also run minimized, you have to also put -minimized on the command line.
**
** Tested under MinGW: gcc -o dual.exe dual.c -lgdi32
**
*/
#include <windows.h>
#include <stdio.h>
static int my_win_main(HINSTANCE hInstance,int argc,char *argv[],int iCmdShow);
static LRESULT CALLBACK WndProc(HWND hwnd,UINT iMsg,WPARAM wParam,LPARAM lParam);
static int win_started_from_console(void);
static BOOL CALLBACK find_win_by_procid(HWND hwnd,LPARAM lp);
int main(int argc,char *argv[])
{
HINSTANCE hinst;
int i,gui,relaunch,minimized,started_from_console;
/*
** If not run from command-line, or if run with "-gui" option, then GUI mode
** Otherwise, CONSOLE app.
*/
started_from_console = win_started_from_console();
gui = !started_from_console;
relaunch=0;
minimized=0;
/*
** Check command options for forced GUI and/or re-launch
*/
for (i=1;i<argc;i++)
{
if (!strcmp(argv[i],"-minimized"))
minimized=1;
if (!strcmp(argv[i],"-gui"))
gui=1;
if (!strcmp(argv[i],"-gui-"))
gui=0;
if (!strcmp(argv[i],"-relaunch"))
relaunch=1;
}
if (!gui && !relaunch)
{
/* RUN AS CONSOLE APP */
printf("Console app only.\n");
printf("Usage: dual [-gui[-]] [-minimized].\n\n");
if (!started_from_console)
{
char buf[16];
printf("Press <Enter> to exit.\n");
fgets(buf,15,stdin);
}
return(0);
}
/* GUI mode */
/*
** If started from CONSOLE, but want to run in GUI mode, need to re-launch
** application to completely separate it from the console that started it.
**
** Technically, we don't have to re-launch if we are not started from
** a console to begin with, but by re-launching we can avoid the flicker of
** the console window when we start if we start from a shortcut which tells
** us to run minimized.
**
** If the user puts "-minimized" on the command-line, then there's
** no point to re-launching when double-clicked.
*/
if (!relaunch && (started_from_console || !minimized))
{
char exename[256];
char buf[512];
STARTUPINFO si;
PROCESS_INFORMATION pi;
GetStartupInfo(&si);
GetModuleFileNameA(NULL,exename,255);
sprintf(buf,"\"%s\" -relaunch",exename);
for (i=1;i<argc;i++)
{
if (strlen(argv[i])+3+strlen(buf) > 511)
break;
sprintf(&buf[strlen(buf)]," \"%s\"",argv[i]);
}
memset(&pi,0,sizeof(PROCESS_INFORMATION));
memset(&si,0,sizeof(STARTUPINFO));
si.cb = sizeof(STARTUPINFO);
si.dwX = 0; /* Ignored unless si.dwFlags |= STARTF_USEPOSITION */
si.dwY = 0;
si.dwXSize = 0; /* Ignored unless si.dwFlags |= STARTF_USESIZE */
si.dwYSize = 0;
si.dwFlags = STARTF_USESHOWWINDOW;
si.wShowWindow = SW_SHOWNORMAL;
/*
** Note that launching ourselves from a console will NOT create new console.
*/
CreateProcess(exename,buf,0,0,1,DETACHED_PROCESS,0,NULL,&si,&pi);
return(10); /* Re-launched return code */
}
/*
** GUI code starts here
*/
hinst=GetModuleHandle(NULL);
/* Free the console that we started with */
FreeConsole();
/* GUI call with functionality of WinMain */
return(my_win_main(hinst,argc,argv,minimized ? SW_MINIMIZE : SW_SHOWNORMAL));
}
static int my_win_main(HINSTANCE hInstance,int argc,char *argv[],int iCmdShow)
{
HWND hwnd;
MSG msg;
WNDCLASSEX wndclass;
static char *wintitle="GUI Window";
wndclass.cbSize = sizeof (wndclass) ;
wndclass.style = CS_HREDRAW | CS_VREDRAW;
wndclass.lpfnWndProc = WndProc;
wndclass.cbClsExtra = 0 ;
wndclass.cbWndExtra = 0 ;
wndclass.hInstance = hInstance;
wndclass.hIcon = NULL;
wndclass.hCursor = NULL;
wndclass.hbrBackground = NULL;
wndclass.lpszMenuName = NULL;
wndclass.lpszClassName = wintitle;
wndclass.hIconSm = NULL;
RegisterClassEx (&wndclass) ;
hwnd = CreateWindowEx(WS_EX_OVERLAPPEDWINDOW,wintitle,0,
WS_VISIBLE|WS_OVERLAPPEDWINDOW,
100,100,400,200,NULL,NULL,hInstance,NULL);
SetWindowText(hwnd,wintitle);
ShowWindow(hwnd,iCmdShow);
while (GetMessage(&msg,NULL,0,0))
{
TranslateMessage(&msg);
DispatchMessage(&msg);
}
return(msg.wParam);
}
static LRESULT CALLBACK WndProc (HWND hwnd,UINT iMsg,WPARAM wParam,LPARAM lParam)
{
if (iMsg==WM_DESTROY)
{
PostQuitMessage(0);
return(0);
}
return(DefWindowProc(hwnd,iMsg,wParam,lParam));
}
static int fwbp_pid;
static int fwbp_count;
static int win_started_from_console(void)
{
fwbp_pid=GetCurrentProcessId();
if (fwbp_pid==0)
return(0);
fwbp_count=0;
EnumWindows((WNDENUMPROC)find_win_by_procid,0L);
return(fwbp_count==0);
}
static BOOL CALLBACK find_win_by_procid(HWND hwnd,LPARAM lp)
{
int pid;
GetWindowThreadProcessId(hwnd,(LPDWORD)&pid);
if (pid==fwbp_pid)
fwbp_count++;
return(TRUE);
}

I have written up an alternative approach which avoids the console flash. See How to create a Windows program that works both as a GUI and console application.

Run AllocConsole() in a static constructor works for me

C#: Is it possible to have a single application behave as Console or Windows application depending on switches?

I have a simple application that I would like to sort of automate via switches. But when I do run it via switches I don't really want a user interface showing. I just want it to run, do it's job, print stuff out in the console, and exit. On the other hand if I don't run it with any switches I want the user interface to pop up. And in this case I don't really want a console window hanging around in the background.
Is there any way I can do this, or do I have to create two separate projects, one Console Application and one Windows Application?

Whilst not exactly what you have asked, I've achieved the appearance of this behaviour in the past by using the FreeConsole pInvoke to remove the console window.
You set the output type of the project to be a console application. You then define the extern call to FreeConsole:
[DllImport("kernel32.dll", SetLastError=true)]
private static extern int FreeConsole();
Then, in you Main method you switch based on your conditions. If you want a UI, call FreeConsole before opening the form to clear the console window.
if (asWinForms)
{
FreeConsole();
Application.Run(new MainForm());
}
else
{
// console logic here
}
A console window does briefly appear at startup, but in my case it was acceptable.
This is a bit of a hack though and has a bad smell, so I'd seriously consider whether you do want to go down this route.

From 'The Old New Thing'
How do I write a program that can be run either as a console or a GUI application?
You can't.
(I'll let you click on the article for the details of how to fake it)

Sure, just put a switch statement (or if else construction) in the static main(string[] args), based on arguments passed in command line. I also do this to switch between executing as a service or as a console...
NOTE: Set project type as Console App
[DllImport("kernel32.dll", SetLastError=true)]
private static extern int FreeConsole();
[STAThread]
static void Main(string[] args)
{
if (args.Length == 0 && args[0] == "C") // Console
{
// Run as console code
Console.WriteLine("Running as Console App");
Console.WriteLine("Hit any Key to exit");
Console.ReadLine();
}
else
{
//Console.SetWindowSize(1,1);
//string procName = Assembly.GetExecutingAssembly().FullName;
//ProcessStartInfo info = new ProcessStartInfo(procName );
//info.WindowStyle = ProcessWindowStyle.Minimized;
// EDIT: Thanks to Adrian Bank's answer -
// a better approach is to use FreeConsole()
FreeConsole();
Application.Run(new MyForm());
}
}
EDIT: Thanks to Adrian Bank's answer, FreeConsole() is much better approach to "dispense" with Console window than just minimizing it...

They are two different paradigms, I don't think that using a command line switch like this is a good idea. Why not build the core logic into a console application and then call that from the GUI when needed? This would nicely separate the UI from the implementation but would still provide a way to use the Console app stand alone when needed.

I believe the answer is no, or it was last time I looked into this problem.
The executable is marked as either a windowed application or a console application. You can see this in the properties for you project in Visual Studio, under application, Output type
You could simulate the behavior by having two application, a console application that if executed with no arguments launches the GUI application. You may see a console window flash, unless you ran in from an already open console.

Without implementing your own version of a console window the answer is no. When Windows loads you executable it decides whether or not to give you a console window based on data in the PE header. So you can make a windowed app not have a window but you can't make a windoed app have a console.

You can, but with some drawbacks:
You can prevent having this black window on start up if you compile for subsystem Windows.
But then you have to attach the process to the calling console (cmd.exe) manually via AttachConsole(-1)
http://msdn.microsoft.com/en-us/library/windows/desktop/ms681952%28v=vs.85%29.aspx
This alone does not do the job. You also have to redirect the three std streams to the console via these calls:
// redirect unbuffered STDOUT to the console
lStdHandle = (long)GetStdHandle(STD_OUTPUT_HANDLE);
hConHandle = _open_osfhandle(lStdHandle, _O_TEXT);
fp = _fdopen( hConHandle, "w" );
*stdout = *fp;
setvbuf( stdout, NULL, _IONBF, 0 );
fp = _fdopen( hConHandle, "r" );
*stdin = *fp;
setvbuf( stdin, NULL, _IONBF, 0 );
// redirect unbuffered STDERR to the console
lStdHandle = (long)GetStdHandle(STD_ERROR_HANDLE);
hConHandle = _open_osfhandle(lStdHandle, _O_TEXT);
fp = _fdopen( hConHandle, "w" );
*stderr = *fp;
setvbuf( stderr, NULL, _IONBF, 0 );
// make cout, wcout, cin, wcin, wcerr, cerr, wclog and clog
// point to console as well
ios::sync_with_stdio();
Sample from: http://cygwin.com/ml/cygwin/2004-05/msg00215.html
The problem with your WinMain call is that windows already has forked out your process so the calling cmd.exe console will have returned from your .exe already and proceed with the next command.
To prevent that you can call your exe with start /wait myexe.exe
This way you also get the return value of your app and you can check it with %errorlevel% as usual.
If there is a way to prevent that process forking with subsystem windows please let me know.
Hope this helps.

Develop Reference

C# (C-Sharp) is a programming language developed by Microsoft that runs on the .NET Framework.