I'm trying to check if below two regex are matching
Target Url: /challenge/getAllChallenges?type=public
Regex: "/challenge/getAllChallenges([/?]+)"
But seems like above Regex only allows any character to appear after "getAllChallenge"
How do I allow only '?' as the first character to appear after "getAllChallenge"?
ideally both of below url to be validated as a match through a single regex:
/challenge/getAllChallenges
/challenge/getAllChallenges?type=public
but below to be not valid
/challenge/getAllChallenge/blah
/challenge/getAllChallengeblah
Something like
/challenge/getAllChallenges(\?[^?]+)?$
It's "/challenge/getAllChallenges" followed by zero or one of: (question mark followed by one or more of anything other than question mark)
Your original regex required "/challenge/getAllChallenges" followed by one or more of: (forward slash, question mark)
Special characters lose their meaning inside [] character classes, and hence do not need escaping (if that's what you were trying to do by putting a slash before the ? (which if you were, the slash was the wrong direction; backslash escapes, not forward slash))
It would be important to include the end of input marker $ to prevent a partial match reporting a success
-
I support the notion raised in the comment: generally using a class dedicated to parsing and manipulating a kind of value will give better results than a regex based solution. For example the regex I gave above is in response to what was determined from your required matches - either no ? or ?-followed-by-something but a url that simply ends with a question mark is perfectly valid, but the regex will need tweaking to allow it
https://regex101.com/r/sB9wW6/1
(?:(?<=\s)|^)#(\S+) <-- the problem in positive lookbehind
Working like this on prod: (?:\s|^)#(\S+), but I need a correct start index (without space).
Here is in JS:
var regex = new RegExp(/(?:(?<=\s)|^)#(\S+)/g);
Error parsing regular expression: Invalid regular expression:
/(?:(?<=\s)|^)#(\S+)/
What am I doing wrong?
UPDATE
Ok, no lookbehind in JS :(
But anyways, I need a regex to get the proper start and end index of my match. Without leading space.
Make sure you always select the right regex engine at regex101.com. See an issue that occurred due to using a JS-only compatible regex with [^] construct in Python.
JS regex - at the time of answering this question - did not support lookbehinds. Now, it becomes more and more adopted after its introduction in ECMAScript 2018. You do not really need it here since you can use capturing groups:
var re = /(?:\s|^)#(\S+)/g;
var str = 's #vln1\n#vln2\n';
var res = [];
while ((m = re.exec(str)) !== null) {
res.push(m[1]);
}
console.log(res);
The (?:\s|^)#(\S+) matches a whitespace or the start of string with (?:\s|^), then matches #, and then matches and captures into Group 1 one or more non-whitespace chars with (\S+).
To get the start/end indices, use
var re = /(\s|^)#\S+/g;
var str = 's #vln1\n#vln2\n';
var pos = [];
while ((m = re.exec(str)) !== null) {
pos.push([m.index+m[1].length, m.index+m[0].length]);
}
console.log(pos);
BONUS
My regex works at regex101.com, but not in...
First of all, have you checked the Code Generator link in the Tools pane on the left?
All languages - "Literal string" vs. "String literal" alert - Make sure you test against the same text used in code, literal string, at the regex tester. A common scenario is copy/pasting a string literal value directly into the test string field, with all string escape sequences like \n (line feed char), \r (carriage return), \t (tab char). See Regex_search c++, for example. Mind that they must be replaced with their literal counterparts. So, if you have in Python text = "Text\n\n abc", you must use Text, two line breaks, abc in the regex tester text field. Text.*?abc will never match it although you might think it "works". Yes, . does not always match line break chars, see How do I match any character across multiple lines in a regular expression?
All languages - Backslash alert - Make sure you correctly use a backslash in your string literal, in most languages, in regular string literals, use double backslash, i.e. \d used at regex101.com must written as \\d. In raw string literals, use a single backslash, same as at regex101. Escaping word boundary is very important, since, in many languages (C#, Python, Java, JavaScript, Ruby, etc.), "\b" is used to define a BACKSPACE char, i.e. it is a valid string escape sequence. PHP does not support \b string escape sequence, so "/\b/" = '/\b/' there.
All languages - Default flags - Global and Multiline - Note that by default m and g flags are enabled at regex101.com. So, if you use ^ and $, they will match at the start and end of lines correspondingly. If you need the same behavior in your code check how multiline mode is implemented and either use a specific flag, or - if supported - use an inline (?m) embedded (inline) modifier. The g flag enables multiple occurrence matching, it is often implemented using specific functions/methods. Check your language reference to find the appropriate one.
line-breaks - Line endings at regex101.com are LF only, you can't test strings with CRLF endings, see regex101.com VS myserver - different results. Solutions can be different for each regex library: either use \R (PCRE, Java, Ruby) or some kind of \v (Boost, PCRE), \r?\n, (?:\r\n?|\n)/(?>\r\n?|\n) (good for .NET) or [\r\n]+ in other libraries (see answers for C#, PHP). Another issue related to the fact that you test your regex against a multiline string (not a list of standalone strings/lines) is that your patterns may consume the end of line, \n, char with negated character classes, see an issue like that. \D matched the end of line char, and in order to avoid it, [^\d\n] could be used, or other alternatives.
php - You are dealing with Unicode strings, or want shorthand character classes to match Unicode characters, too (e.g. \w+ to match Стрибижев or Stribiżew, or \s+ to match hard spaces), then you need to use u modifier, see preg_match() returns 0 although regex testers work - To match all occurrences, use preg_match_all, not preg_match with /...pattern.../g, see PHP preg_match to find multiple occurrences and "Unknown modifier 'g' in..." when using preg_match in PHP?- Your regex with inline backreference like \1 refuses to work? Are you using a double quoted string literal? Use a single-quoted one, see Backreference does not work in PHP
phplaravel - Mind you need the regex delimiters around the pattern, see https://stackoverflow.com/questions/22430529
python - Note that re.search, re.match, re.fullmatch, re.findall and re.finditer accept the regex as the first argument, and the input string as the second argument. Not re.findall("test 200 300", r"\d+"), but re.findall(r"\d+", "test 200 300"). If you test at regex101.com, please check the "Code Generator" page. - You used re.match that only searches for a match at the start of the string, use re.search: Regex works fine on Pythex, but not in Python - If the regex contains capturing group(s), re.findall returns a list of captures/capture tuples. Either use non-capturing groups, or re.finditer, or remove redundant capturing groups, see re.findall behaves weird - If you used ^ in the pattern to denote start of a line, not start of the whole string, or used $ to denote the end of a line and not a string, pass re.M or re.MULTILINE flag to re method, see Using ^ to match beginning of line in Python regex
- If you try to match some text across multiple lines, and use re.DOTALL or re.S, or [\s\S]* / [\s\S]*?, and still nothing works, check if you read the file line by line, say, with for line in file:. You must pass the whole file contents as the input to the regex method, see Getting Everything Between Two Characters Across New Lines. - Having trouble adding flags to regex and trying something like pattern = r"/abc/gi"? See How to add modifers to regex in python?
c#, .net - .NET regex does not support possessive quantifiers like ++, *+, ??, {1,10}?, see .NET regex matching digits between optional text with possessive quantifer is not working - When you match against a multiline string and use RegexOptions.Multiline option (or inline (?m) modifier) with an $ anchor in the pattern to match entire lines, and get no match in code, you need to add \r? before $, see .Net regex matching $ with the end of the string and not of line, even with multiline enabled - To get multiple matches, use Regex.Matches, not Regex.Match, see RegEx Match multiple times in string - Similar case as above: splitting a string into paragraphs, by a double line break sequence - C# / Regex Pattern works in online testing, but not at runtime - You should remove regex delimiters, i.e. #"/\d+/" must actually look like #"\d+", see Simple and tested online regex containing regex delimiters does not work in C# code - If you unnecessarily used Regex.Escape to escape all characters in a regular expression (like Regex.Escape(#"\d+\.\d+")) you need to remove Regex.Escape, see Regular Expression working in regex tester, but not in c#
dartflutter - Use raw string literal, RegExp(r"\d"), or double backslashes (RegExp("\\d")) - https://stackoverflow.com/questions/59085824
javascript - Double escape backslashes in a RegExp("\\d"): Why do regex constructors need to be double escaped?
- (Negative) lookbehinds unsupported by most browsers: Regex works on browser but not in Node.js - Strings are immutable, assign the .replace result to a var - The .replace() method does change the string in place - Retrieve all matches with str.match(/pat/g) - Regex101 and Js regex search showing different results or, with RegExp#exec, RegEx to extract all matches from string using RegExp.exec- Replace all pattern matches in string: Why does javascript replace only first instance when using replace?
javascriptangular - Double the backslashes if you define a regex with a string literal, or just use a regex literal notation, see https://stackoverflow.com/questions/56097782
java - Word boundary not working? Make sure you use double backslashes, "\\b", see Regex \b word boundary not works - Getting invalid escape sequence exception? Same thing, double backslashes - Java doesn't work with regex \s, says: invalid escape sequence - No match found is bugging you? Run Matcher.find() / Matcher.matches() - Why does my regex work on RegexPlanet and regex101 but not in my code? - .matches() requires a full string match, use .find(): Java Regex pattern that matches in any online tester but doesn't in Eclipse - Access groups using matcher.group(x): Regex not working in Java while working otherwise - Inside a character class, both [ and ] must be escaped - Using square brackets inside character class in Java regex - You should not run matcher.matches() and matcher.find() consecutively, use only if (matcher.matches()) {...} to check if the pattern matches the whole string and then act accordingly, or use if (matcher.find()) to check if there is a single match or while (matcher.find()) to find multiple matches (or Matcher#results()). See Why does my regex work on RegexPlanet and regex101 but not in my code?
scala - Your regex attempts to match several lines, but you read the file line by line (e.g. use for (line <- fSource.getLines))? Read it into a single variable (see matching new line in Scala regex, when reading from file)
kotlin - You have Regex("/^\\d+$/")? Remove the outer slashes, they are regex delimiter chars that are not part of a pattern. See Find one or more word in string using Regex in Kotlin - You expect a partial string match, but .matchEntire requires a full string match? Use .find, see Regex doesn't match in Kotlin
mongodb - Do not enclose /.../ with single/double quotation marks, see mongodb regex doesn't work
c++ - regex_match requires a full string match, use regex_search to find a partial match - Regex not working as expected with C++ regex_match - regex_search finds the first match only. Use sregex_token_iterator or sregex_iterator to get all matches: see What does std::match_results::size return? - When you read a user-defined string using std::string input; std::cin >> input;, note that cin will only get to the first whitespace, to read the whole line properly, use std::getline(std::cin, input); - C++ Regex to match '+' quantifier - "\d" does not work, you need to use "\\d" or R"(\d)" (a raw string literal) - This regex doesn't work in c++ - Make sure the regex is tested against a literal text, not a string literal, see Regex_search c++
go - Double backslashes or use a raw string literal: Regular expression doesn't work in Go - Go regex does not support lookarounds, select the right option (Go) at regex101.com before testing! Regex expression negated set not working golang
groovy - Return all matches: Regex that works on regex101 does not work in Groovy
r - Double escape backslashes in the string literal: "'\w' is an unrecognized escape" in grep - Use perl=TRUE to PCRE engine ((g)sub/(g)regexpr): Why is this regex using lookbehinds invalid in R?
oracle - Greediness of all quantifiers is set by the first quantifier in the regex, see Regex101 vs Oracle Regex (then, you need to make all the quantifiers as greedy as the first one)] - \b does not work? Oracle regex does not support word boundaries at all, use workarounds as shown in Regex matching works on regex tester but not in oracle
firebase - Double escape backslashes, make sure ^ only appears at the start of the pattern and $ is located only at the end (if any), and note you cannot use more than 9 inline backreferences: Firebase Rules Regex Birthday
firebasegoogle-cloud-firestore - In Firestore security rules, the regular expression needs to be passed as a string, which also means it shouldn't be wrapped in / symbols, i.e. use allow create: if docId.matches("^\\d+$").... See https://stackoverflow.com/questions/63243300
google-data-studio - /pattern/g in REGEXP_REPLACE must contain no / regex delimiters and flags (like g) - see How to use Regex to replace square brackets from date field in Google Data Studio?
google-sheets - If you think REGEXEXTRACT does not return full matches, truncates the results, you should check if you have redundant capturing groups in your regex and remove them, or convert the capturing groups to non-capturing by add ?: after the opening (, see Extract url domain root in Google Sheet
sed - Why does my regular expression work in X but not in Y?
word-boundarypcrephp - [[:<:]] and [[:>:]] do not work in the regex tester, although they are valid constructs in PCRE, see https://stackoverflow.com/questions/48670105
snowflake-cloud-data-platform snowflake-sql - If you are writing a stored procedure, and \\d does not work, you need to double them again and use \\\\d, see REGEX conversion of VARCHAR value to DATE in Snowflake stored procedure using RLIKE not consistent.
If I have the following text...
The quick :brown:fox: jumped over the lazy :dog:.
I would like a regular expression to capture all the words that are between 2 : characters. In the above example it should return :brown:, :fox:, :dog:.
So far, I have this (\:{1}.\w*\s*\:{1}) which returns :brown: and :dog:. I can't quite figure out how to share the : between the 2 matching groups so that it will also return ':fox:'.
Here is a simple pattern which can be made to work:
(?<=:)(\w+)(?=:)
This uses lookarounds to make sure that one or more word characters are surrounded before and after by colons. Check the demo below to see it working.
The match would be available as the first capture group. Actually, it should also be available as the entire match itself, because lookarounds do not consume anything.
Demo
I like the above lookaround approach because it is clean and simple (at least in my mind). If, for some reason, you don't want any lookarounds, then just use the following pattern:
:(\w+):
But note that now you explicitly have to access the first capture group to obtain the matching word without colons on either side.
Expression
var regex = new Regex(#"{([A-z]*)(([^]|:)((\\:)|[^:])*?)(([^]|:)((\\:)|[^:])*?)}");
Breakdown
The expression is [crudely] designed to find tokens within an input, using the format: {name[:pattern[:format]]}, where the pattern and format are optional.
{
([A-z]*) // name
(([^]|:)((\\:)|[^:])*?) // regex pattern
(([^]|:)((\\:)|[^:])*?) // format
}
Additionally, the expression attempts to ignore escaped colons, thus allowing for strings such as {Time:\d+\:\d+\:\d+:hh\:mm\:ss}
Question
When testing on RegExr.com, everything works sufficiently, however when attempting the same pattern in C#, the input fails to match, why?
(Any advice for general improvements to the expression are very welcome too)
The [^] pattern is only valid in JavaScript where it matches a not nothing, i.e. any character (although in ES5, it does not match the chars from outside the BMP plane). In C#, it is easy to match any char with . and passing the RegexOptions.Singleline modifier. However, in JS, the modifier is not supported, but you may match any char with [\s\S] workaround pattern.
So, the minimum change you need to make to make both compatible in both regex flavors is to change ([^]|:) to [\s\S] because there is no need to use a : as an alternative (since [\s\S] will already match a colon).
Also, do not use [A-z] as a shortcut to match ASCII letters. Either use [a-zA-Z] or [a-z] and pass a case insensitive modifier.
So, you might consider writing the expression as
{([A-Za-z]*)([\s\S]((\\:)|[^:])*?)([\s\S]((\\:)|[^:])*?)}
See a .NET regex test and a JS regex test.
Surely, there may be other enhancements here: remove redundant groups, add support for any escape sequences (not just escaped colons), etc., but it is out of the question scope.
I'm trying to check if the next string is match to this pattern in this code:
string str = "CRSSA.T,";
var pattern = #"((\w+\.{1}\w+)+(,\w+\.{1}\w+)*)";
Console.WriteLine(Regex.IsMatch(str, pattern));
the site: http://www.regexr.com/ says it's not match(everything match, except the last comma), but that code prints True. is it possible?
thanks ahead! :)
First of all, sure it can happen that different regex engines disagree, either because the capabilities differ or the interpretation, e.g. Java's String.matches method explicitly requires the whole string to match, not just a substring.
In your case, though, both regexr and .NET say it matches, because the substring CRSSA.T will match. Your third group, containing the comma, has a * quantifier, i.e. it can be matched zero or more times. In this case it's being matched zero times, but that's okay. It's still a match.
If you want the whole string to match, and no substrings whatsoever, then you need to add anchors to your regex:
^((\w+\.{1}\w+)+(,\w+\.{1}\w+)*)$
Furthermore, {1} is a useless quantifier, you can just leave it out. Also, if you have a capturing group around the whole regex, you can leave that out as well, as it's already in capturing group 0 automatically. So a bit simplified you could use:
^(\w+\.\w+)+(,\w+\.\w+)*$
Also be careful with \w and \b. Those two features are closely linked (by the definition of \w and \W and are not always intuitive. E.g. they include the underscore and, depending on the regex engine, a lot more than just [A-Za-z_], e.g. in .NET \w also matches things like ä, µ, Ð, ª, or º. For those reasons I tend to be rather explicit when writing more robust regexes (i.e. those that are not just used for a quick one-off usage) and use things like [A-Za-z], \p{L}, (?=\P{L}|$), etc. instead of \w, \W and \b.