Wondering if anyone who has extensive experience with RDLC can give me a clue how to set this up.
So currently I have a report setup as such:
Header
Table start
Row That repeats at the start of every page
Here I want to add the work Remark but I need it to just display once
and take full page but also have the above Row still repeat on every page
but putting it as a header is not an option
Group1 Prints info based off of an account and repeats until it has gone through all accounts
Table end
Footer
Between the table and the Row that repeats at the start of every page I want to add a page break. Everything I have tried has not worked right(resized the row to the size of the page, added a rectangle inside at the top of group 1 and set a page break and added the word Remark in another row above the rectangle... Remark shows after the page break)
Starting to run out of ideas for some that seems entirely too simple. My wording may be a little off please let me know if more clarification would help.
Essentially it should look like:
Header Page1
Report title and type
Remarks:
Footer Page1
Header Page2
Report title and type
Item1
Subitem1
Item2
Subitem2
Footer Page2
Header Page3
Report title and type
Item3
Subitem3
So on and so Forth
Footer Page3
This is how I would set up the report you described, and should deliver the wanted result.
Header Page
Report title 1 This should be a TextBox which you fill by parameter, this is only for the first Title on the first page
Remarks: Again use one or multiple TextBoxes filling it by parameter as it shouldn't be repeated.
Rectangle - start using a List element here on which you group. You could set the size of the rectangle so it takes the space of a single page, this way it will definitely break even if two items would fit on a single page. If the content exceeds the rectangle's size then it will simply grow and continue on the next page to break correctly again for the next element. But if you want multiple items on a page if possible, just make the rectangle wrap exactly around the content (and not stretch an entire page). For both situation you need to make sure the Keep contents together on a single page, if possible and Add a page break after are checked, this will add a page-break after the Remarks.
Report title # This is a TextBox but not from a parameter but from the datasource(/set) based on the grouped element that you're displaying. If you want the title to be repeated when the item exceeds the page's size, just set the RepeatWith property to the element below it, being a Tablix for example.
Item # This is any component, probably a Table (tablix) but this could also be another List (rectangle).
SubItem # Rows of the tablix for example, or this could nest even deeper ...
Rectangle - end
Footer Page
Related
I have a report with a group, but on the first page there is general information and I want the records of the group to be shown from the second page. Currently the group starts on the first page, how can I start the second page?
With the below, does not show the group on the first page but on the second page does not show the first group records. That is, the group starts on the first page only that hides the records, I want the group to start on the second page.
Report Header
Page Headers
GroupHeader (suppress if = first page)
Details
GroupFooter
Report Footer
Page Footer
Thanks
If I understand correctly, you want to have a page 2 pages for formatting.
In that case, do the following :
Open the report in Design View
Right click on the Page Footer section and select Section Expert
Make sure the Page Footer section is selected in the Section Expert dialog box.
Check the box that says "New Page After"
Click Save and Close and then click OK.
My requirement is that, I have list of customers and a want to build a report for salary structure. The report should show total on each page if number of pages are more than one and there should be a summary page at last which shows page wise total.
The first problem I have solved my restricting the records per page by 10 and taking the running sum at bottom. This shows total on each page. But I am not able to figure out the solution for second issue.
I want something like shown in attached image.
Summary Page Table
I was thinking of grouping the rows and taking total but its not working for me.
For total of all page's salary you can add a textbox in footer and add expression like this.
=IIF( Globals.PageNumber =Globals.TotalPages,Sum(Fields!salary.Value, "DataSet1"), "")
1)I am using matrix to show my data as tax for each year. So in row I am showing tax name and for column I am grouping against year. I using rdlc to export it as pdf. on a page as per width it showing 6 column and as there is no space it split remaining columns on another page. Now my issue is, there are no much rows and there is space on same page below that tablix to occupy another tablix (splitted column's) still it is moving remaining columns on another page. I tried with keepTogether property but is it not working for me. I set it for tablix,column group also.
2) Now I want to use this above report as sub report so I add this report on another report file at the end of page. So while rendering the report as subreport it split exceed columns on another page which is also at the end of page keeping a lot of empty space at start of that second page. How can I avoid this.
Suppose I have Main report with some basic info at first then I put sub report at end of first page. Now sub report contains data in matrix which column increases dynamically. so after 4 column it split and goes on next page for next page and put remaining columns on next page at the END. Which I want at the start of next page.
basic info
sub report content in matrix
---------------------------------------------------------------------------
page break here from sub report as more columns are there.
( this space remain blank. I want to avoid this blank space.)
sub report remaining columns came here.
I use CrystalReport in Visual Studio 2005 and make a bill report ... this bill
I use the header - Details- and footer in this report ..
in details section I limit the record to 10 for every page
so if there is a bill contains 15 record ..
first 10 record in first page . and 5 in the second page when print
put the problems
1- the footer show in the second page only
2- in the second page the Fields in the footer Raised up beacuse the second page contains 5 records only
so if the record number in the report is not 10 so the footer fields raised up
so please any one help me to solve the problem
Notation : I limit the number of records for every page to 10 record only .. i need empty
records if the reports records < 10 \
Please any one help my
Thanks
Sorry I don't know 100% what your problem is (maybe post some screenshots) but there might be two possible problems/solutions:
in CR Reports you've got document and page footer - if you use the document footer (don't remember the exact name) you will see this only once - just like a document header
if the details parts get's to big the footers are AFAIK the first thing that get's striped so try to compress your details (or any other section) to get more area for the footer (or display only 9 items per page instead of 10 - just for trial)
To really fill your report with empty details you will have to append empty rows to your data and use conditional supresses in your CR to not show things like '0' but IMHO this will get a real pain and you should go without printing empty details - never seen a situation where you need this or where it is desired.
I am using RDLC report in Win-form. I want to add the Below Page as Summary. That's mean, I want to add this page as separate page in Report.
My Friends Working in Fox pro. He said it possible in Summary Field, Its Like a Footer. But Can't able to Find That. Pls Help Me.
The Committee has considered the following aspects before finalizing the attendance%
for the B.Sc H&HA I year I semester Students,
1. Students involved in attending ODC, Exhibitions and other functions
deputed by the college.
2. Students who had shortage of attendance were instructed to attend the classes in
the weekend / Holidays. Classes were conducted by the staff who
were stationed at the Institute.
As directed by the principal, in the interest of the students and due to the semester pattern,
It has been decided to consider overall attendance % for the eligibility to write
the NCHM semester examination 2011.
(Mr.Elangovan) (Mr.Mathew) (Mr. Senthil Kumar) (Ms. Sharmila) ( Ms. Parimala) (Mr. Thirulogchander)
(PRINCIPAL)
Sounds like you just need to add a page break before your summary text:
http://msdn.microsoft.com/en-us/library/ms251701(v=vs.80).aspx
Yeah, Foxpro makes things like that very easy... Not knowing your data source, and if you could adjust by adding a column/field to the output per row. I would add a column of a blob (or Memo from FoxPro) where you can just dump a bunch of text to it. Then on the last record of the data to be printed, have this column printed. Since it won't exist for any previous records, it wont otherwise cause a conflict with any other content. Then, as Daniel mentioned, you can throw a force page break so this content shows on its own page.
I agree that it will probably be easier to add a page break to your report and add your info page above to that page. I don't know what you are using to create your report Visual Studio 2005/2008 but here are some instructions on adding a page break in VS 2005.
How to Set Page Breaks
Defining Page Size and Page Breaks
I am not sure of how your report is set up but if you instructions do specify the following:
To add a page break to a report item
Right-click the report item and then click Properties.
**Note**
Item page breaks apply only to the report items rectangle, table, matrix, list, and chart.
On the General tab, for Page breaks, select Insert a page break before this list (rectangle, table, or matrix) or Insert a page break after this list (rectangle, table, or matrix).
So keep in mind that applying the page break to an item it has to be a rectangle, table, etc. I just did a test in VS2005 and added a rectangle, then placed a text box inside with the data from above and it placed it on a separate page in the report.
Hope this helps.