I am getting an error as follows :-
Procedure or function 'GetDetails' expects parameter '#Number', which
was not supplied.
Upon debugging , I found that function is getting the values . But I am not sure how to rectify this error . I am unable to understand how to supply values to '#' parameter .
Please help in simple language
You need to add the #Number parameter to your command and set the value.
Here's an example of executing a stored procedure with parameters taken from MSDN.
static void GetSalesByCategory(string connectionString,
string categoryName)
{
using (SqlConnection connection = new SqlConnection(connectionString))
{
// Create the command and set its properties.
SqlCommand command = new SqlCommand();
command.Connection = connection;
command.CommandText = "SalesByCategory";
command.CommandType = CommandType.StoredProcedure;
// Add the input parameter and set its properties.
SqlParameter parameter = new SqlParameter();
parameter.ParameterName = "#CategoryName";
parameter.SqlDbType = SqlDbType.NVarChar;
parameter.Direction = ParameterDirection.Input;
parameter.Value = categoryName;
// Add the parameter to the Parameters collection.
command.Parameters.Add(parameter);
// Open the connection and execute the reader.
connection.Open();
SqlDataReader reader = command.ExecuteReader();
if (reader.HasRows)
{
while (reader.Read())
{
Console.WriteLine("{0}: {1:C}", reader[0], reader[1]);
}
}
else
{
Console.WriteLine("No rows found.");
}
reader.Close();
}
}
https://msdn.microsoft.com/en-us/library/tyy0sz6b%28v=vs.110%29.aspx
Related
My stored procedure has an output parameter:
#ID INT OUT
How can I retrieve this using ado.net?
using (SqlConnection conn = new SqlConnection(...))
{
SqlCommand cmd = new SqlCommand("sproc", conn);
cmd.CommandType = CommandType.StoredProcedure;
// add parameters
conn.Open();
// *** read output parameter here, how?
conn.Close();
}
The other response shows this, but essentially you just need to create a SqlParameter, set the Direction to Output, and add it to the SqlCommand's Parameters collection. Then execute the stored procedure and get the value of the parameter.
Using your code sample:
// SqlConnection and SqlCommand are IDisposable, so stack a couple using()'s
using (SqlConnection conn = new SqlConnection(connectionString))
using (SqlCommand cmd = new SqlCommand("sproc", conn))
{
// Create parameter with Direction as Output (and correct name and type)
SqlParameter outputIdParam = new SqlParameter("#ID", SqlDbType.Int)
{
Direction = ParameterDirection.Output
};
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add(outputIdParam);
conn.Open();
cmd.ExecuteNonQuery();
// Some various ways to grab the output depending on how you would like to
// handle a null value returned from the query (shown in comment for each).
// Note: You can use either the SqlParameter variable declared
// above or access it through the Parameters collection by name:
// outputIdParam.Value == cmd.Parameters["#ID"].Value
// Throws FormatException
int idFromString = int.Parse(outputIdParam.Value.ToString());
// Throws InvalidCastException
int idFromCast = (int)outputIdParam.Value;
// idAsNullableInt remains null
int? idAsNullableInt = outputIdParam.Value as int?;
// idOrDefaultValue is 0 (or any other value specified to the ?? operator)
int idOrDefaultValue = outputIdParam.Value as int? ?? default(int);
conn.Close();
}
Be careful when getting the Parameters[].Value, since the type needs to be cast from object to what you're declaring it as. And the SqlDbType used when you create the SqlParameter needs to match the type in the database. If you're going to just output it to the console, you may just be using Parameters["#Param"].Value.ToString() (either explictly or implicitly via a Console.Write() or String.Format() call).
EDIT: Over 3.5 years and almost 20k views and nobody had bothered to mention that it didn't even compile for the reason specified in my "be careful" comment in the original post. Nice. Fixed it based on good comments from #Walter Stabosz and #Stephen Kennedy and to match the update code edit in the question from #abatishchev.
For anyone looking to do something similar using a reader with the stored procedure, note that the reader must be closed to retrieve the output value.
using (SqlConnection conn = new SqlConnection())
{
SqlCommand cmd = new SqlCommand("sproc", conn);
cmd.CommandType = CommandType.StoredProcedure;
// add parameters
SqlParameter outputParam = cmd.Parameters.Add("#ID", SqlDbType.Int);
outputParam.Direction = ParameterDirection.Output;
conn.Open();
using(IDataReader reader = cmd.ExecuteReader())
{
while(reader.Read())
{
//read in data
}
}
// reader is closed/disposed after exiting the using statement
int id = outputParam.Value;
}
Not my code, but a good example i think
source: http://www.eggheadcafe.com/PrintSearchContent.asp?LINKID=624
using System;
using System.Data;
using System.Data.SqlClient;
class OutputParams
{
[STAThread]
static void Main(string[] args)
{
using( SqlConnection cn = new SqlConnection("server=(local);Database=Northwind;user id=sa;password=;"))
{
SqlCommand cmd = new SqlCommand("CustOrderOne", cn);
cmd.CommandType=CommandType.StoredProcedure ;
SqlParameter parm= new SqlParameter("#CustomerID",SqlDbType.NChar) ;
parm.Value="ALFKI";
parm.Direction =ParameterDirection.Input ;
cmd.Parameters.Add(parm);
SqlParameter parm2= new SqlParameter("#ProductName",SqlDbType.VarChar);
parm2.Size=50;
parm2.Direction=ParameterDirection.Output;
cmd.Parameters.Add(parm2);
SqlParameter parm3=new SqlParameter("#Quantity",SqlDbType.Int);
parm3.Direction=ParameterDirection.Output;
cmd.Parameters.Add(parm3);
cn.Open();
cmd.ExecuteNonQuery();
cn.Close();
Console.WriteLine(cmd.Parameters["#ProductName"].Value);
Console.WriteLine(cmd.Parameters["#Quantity"].Value.ToString());
Console.ReadLine();
}
}
public static class SqlParameterExtensions
{
public static T GetValueOrDefault<T>(this SqlParameter sqlParameter)
{
if (sqlParameter.Value == DBNull.Value
|| sqlParameter.Value == null)
{
if (typeof(T).IsValueType)
return (T)Activator.CreateInstance(typeof(T));
return (default(T));
}
return (T)sqlParameter.Value;
}
}
// Usage
using (SqlConnection conn = new SqlConnection(connectionString))
using (SqlCommand cmd = new SqlCommand("storedProcedure", conn))
{
SqlParameter outputIdParam = new SqlParameter("#ID", SqlDbType.Int)
{
Direction = ParameterDirection.Output
};
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add(outputIdParam);
conn.Open();
cmd.ExecuteNonQuery();
int result = outputIdParam.GetValueOrDefault<int>();
}
string ConnectionString = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(ConnectionString))
{
//Create the SqlCommand object
SqlCommand cmd = new SqlCommand(“spAddEmployee”, con);
//Specify that the SqlCommand is a stored procedure
cmd.CommandType = System.Data.CommandType.StoredProcedure;
//Add the input parameters to the command object
cmd.Parameters.AddWithValue(“#Name”, txtEmployeeName.Text);
cmd.Parameters.AddWithValue(“#Gender”, ddlGender.SelectedValue);
cmd.Parameters.AddWithValue(“#Salary”, txtSalary.Text);
//Add the output parameter to the command object
SqlParameter outPutParameter = new SqlParameter();
outPutParameter.ParameterName = “#EmployeeId”;
outPutParameter.SqlDbType = System.Data.SqlDbType.Int;
outPutParameter.Direction = System.Data.ParameterDirection.Output;
cmd.Parameters.Add(outPutParameter);
//Open the connection and execute the query
con.Open();
cmd.ExecuteNonQuery();
//Retrieve the value of the output parameter
string EmployeeId = outPutParameter.Value.ToString();
}
Font http://www.codeproject.com/Articles/748619/ADO-NET-How-to-call-a-stored-procedure-with-output
You can get your result by below code::
using (SqlConnection conn = new SqlConnection(...))
{
SqlCommand cmd = new SqlCommand("sproc", conn);
cmd.CommandType = CommandType.StoredProcedure;
// add other parameters parameters
//Add the output parameter to the command object
SqlParameter outPutParameter = new SqlParameter();
outPutParameter.ParameterName = "#Id";
outPutParameter.SqlDbType = System.Data.SqlDbType.Int;
outPutParameter.Direction = System.Data.ParameterDirection.Output;
cmd.Parameters.Add(outPutParameter);
conn.Open();
cmd.ExecuteNonQuery();
//Retrieve the value of the output parameter
string Id = outPutParameter.Value.ToString();
// *** read output parameter here, how?
conn.Close();
}
Create the SqlParamObject which would give you control to access methods on the parameters
:
SqlParameter param = new SqlParameter();
SET the Name for your paramter (it should b same as you would have declared a variable to hold the value in your DataBase)
: param.ParameterName = "#yourParamterName";
Clear the value holder to hold you output data
: param.Value = 0;
Set the Direction of your Choice (In your case it should be Output)
: param.Direction = System.Data.ParameterDirection.Output;
That looks more explicit for me:
int? id = outputIdParam.Value is DbNull ? default(int?) : outputIdParam.Value;
How do I add parameters to the following stored procedure call?
using (var conn = new SqlConnection(connectionString))
using (var command = new SqlCommand("ProcedureName", conn) {
CommandType = CommandType.StoredProcedure }) {
conn.Open();
command.ExecuteNonQuery();
conn.Close();
}
Like this:
// this would work for a varchar or nvarchar parameter
command.Parameters.AddWithValue("#yourParameter", "someValue");
// this would work for an integer parameter
command.Parameters.AddWithValue("#someInt", 1234);
Obviously you need any code to add parameters to the Parameters collection before you try to call command.ExecuteNonQuery();.
You can use command.Parameters.AddWithValue("#number", TextBox1.Text)
Happy coding!!
I thing you need to be more specific.
What is the problem with using command.Parameters.AddWithValue ?
command.Parameters.Add(
new SqlParameter("#customerId", custumerId));
This might be a solution:
This parameter should be the exact name of the parameter from your stored procedure("yourParameter").
using (var conn = new SqlConnection(connectionString))
{
var command = new SqlCommand("ProcedureName", conn){CommandType = CommandType.StoredProcedure };
command.Parameters.AddWithValue("#yourParameter", "someValue");
conn.Open();
command.ExecuteNonQuery();
conn.Close();
}
You can use SqlCommand.Parameters Property.
command.Parameters.Add("#SomeParmeter", SqlDbType.Int); //SqlDbType is enum
For more details go thru this link : http://msdn.microsoft.com/en-us/library/yy6y35y8.aspx
below code is copied from the above posted link
static void GetSalesByCategory(string connectionString,string categoryName)
{
using (SqlConnection connection = new SqlConnection(connectionString))
{
// Create the command and set its properties.
SqlCommand command = new SqlCommand();
command.Connection = connection;
command.CommandText = "SalesByCategory";
command.CommandType = CommandType.StoredProcedure;
// Add the input parameter and set its properties.
SqlParameter parameter = new SqlParameter();
parameter.ParameterName = "#CategoryName";
parameter.SqlDbType = SqlDbType.NVarChar;
parameter.Direction = ParameterDirection.Input;
parameter.Value = categoryName;
// Add the parameter to the Parameters collection.
command.Parameters.Add(parameter);
// Open the connection and execute the reader.
connection.Open();
SqlDataReader reader = command.ExecuteReader();
if (reader.HasRows)
{
while (reader.Read())
{
Console.WriteLine("{0}: {1:C}", reader[0], reader[1]);
}
}
else
{
Console.WriteLine("No rows found.");
}
reader.Close();
}
}
Is there any tutorial to do this in SQL Server 2008?
Do you have an example?.
Is it possible to execute a stored procedure and get result in C# or something?
A good place to start is the SqlDataReader class:
private static void ReadOrderData(string connectionString)
{
string queryString =
"SELECT OrderID, CustomerID FROM dbo.Orders;";
using (SqlConnection connection =
new SqlConnection(connectionString))
{
SqlCommand command =
new SqlCommand(queryString, connection);
connection.Open();
SqlDataReader reader = command.ExecuteReader();
// Call Read before accessing data.
while (reader.Read())
{
Console.WriteLine(String.Format("{0}, {1}",
reader[0], reader[1]));
}
// Call Close when done reading.
reader.Close();
}
}
More specifically: Using parameters with a SqlCommand and a Stored Procedure
static void GetSalesByCategory(string connectionString,
string categoryName)
{
using (SqlConnection connection = new SqlConnection(connectionString))
{
// Create the command and set its properties.
SqlCommand command = new SqlCommand();
command.Connection = connection;
command.CommandText = "SalesByCategory";
command.CommandType = CommandType.StoredProcedure;
// Add the input parameter and set its properties.
SqlParameter parameter = new SqlParameter();
parameter.ParameterName = "#CategoryName";
parameter.SqlDbType = SqlDbType.NVarChar;
parameter.Direction = ParameterDirection.Input;
parameter.Value = categoryName;
// Add the parameter to the Parameters collection.
command.Parameters.Add(parameter);
// Open the connection and execute the reader.
connection.Open();
SqlDataReader reader = command.ExecuteReader();
if (reader.HasRows)
{
while (reader.Read())
{
Console.WriteLine("{0}: {1:C}", reader[0], reader[1]);
}
}
else
{
Console.WriteLine("No rows found.");
}
reader.Close();
}
}
I am trying to get the output of a stored procedure into a function but with my code i am always getting a error telling that the output parameter is not specified.Can u help?
the code is here.....
public int UserAuthentication(String username, String password)
{
SqlConnection conn = new SqlConnection("Data Source=...\\..; Initial Catalog=CUSTOMER360;User ID=sa;password=******");
SqlCommand command = new SqlCommand("sp_Campaign_UserAuthentication", conn);
command.CommandType = CommandType.StoredProcedure;
command.Parameters.Add(new SqlParameter("#login_id", SqlDbType.VarChar, 50, "loginid"));
command.Parameters.Add(new SqlParameter("#password",
SqlDbType.VarChar,50,
"password"));
SqlParameter ret = command.Parameters.Add(" #result", SqlDbType.Int);
ret.Direction = ParameterDirection.ReturnValue;
command.Parameters["#login_id"].Value = username;
command.Parameters["#password"].Value = password;
conn.Open();
command.ExecuteNonQuery();
conn.Close();
return (int)ret.Value;
}
I think the ReturnValue parameter has to be the first in the (edit) command parameter list.
Also, try querying the return parameter's value before closing the connection.
Ensure that your stored proc calls
RETURN (#SomeReturnValue)
Lastly, try removing the leading space in your " #result" parameter name, just in case.
My stored procedure has an output parameter:
#ID INT OUT
How can I retrieve this using ado.net?
using (SqlConnection conn = new SqlConnection(...))
{
SqlCommand cmd = new SqlCommand("sproc", conn);
cmd.CommandType = CommandType.StoredProcedure;
// add parameters
conn.Open();
// *** read output parameter here, how?
conn.Close();
}
The other response shows this, but essentially you just need to create a SqlParameter, set the Direction to Output, and add it to the SqlCommand's Parameters collection. Then execute the stored procedure and get the value of the parameter.
Using your code sample:
// SqlConnection and SqlCommand are IDisposable, so stack a couple using()'s
using (SqlConnection conn = new SqlConnection(connectionString))
using (SqlCommand cmd = new SqlCommand("sproc", conn))
{
// Create parameter with Direction as Output (and correct name and type)
SqlParameter outputIdParam = new SqlParameter("#ID", SqlDbType.Int)
{
Direction = ParameterDirection.Output
};
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add(outputIdParam);
conn.Open();
cmd.ExecuteNonQuery();
// Some various ways to grab the output depending on how you would like to
// handle a null value returned from the query (shown in comment for each).
// Note: You can use either the SqlParameter variable declared
// above or access it through the Parameters collection by name:
// outputIdParam.Value == cmd.Parameters["#ID"].Value
// Throws FormatException
int idFromString = int.Parse(outputIdParam.Value.ToString());
// Throws InvalidCastException
int idFromCast = (int)outputIdParam.Value;
// idAsNullableInt remains null
int? idAsNullableInt = outputIdParam.Value as int?;
// idOrDefaultValue is 0 (or any other value specified to the ?? operator)
int idOrDefaultValue = outputIdParam.Value as int? ?? default(int);
conn.Close();
}
Be careful when getting the Parameters[].Value, since the type needs to be cast from object to what you're declaring it as. And the SqlDbType used when you create the SqlParameter needs to match the type in the database. If you're going to just output it to the console, you may just be using Parameters["#Param"].Value.ToString() (either explictly or implicitly via a Console.Write() or String.Format() call).
EDIT: Over 3.5 years and almost 20k views and nobody had bothered to mention that it didn't even compile for the reason specified in my "be careful" comment in the original post. Nice. Fixed it based on good comments from #Walter Stabosz and #Stephen Kennedy and to match the update code edit in the question from #abatishchev.
For anyone looking to do something similar using a reader with the stored procedure, note that the reader must be closed to retrieve the output value.
using (SqlConnection conn = new SqlConnection())
{
SqlCommand cmd = new SqlCommand("sproc", conn);
cmd.CommandType = CommandType.StoredProcedure;
// add parameters
SqlParameter outputParam = cmd.Parameters.Add("#ID", SqlDbType.Int);
outputParam.Direction = ParameterDirection.Output;
conn.Open();
using(IDataReader reader = cmd.ExecuteReader())
{
while(reader.Read())
{
//read in data
}
}
// reader is closed/disposed after exiting the using statement
int id = outputParam.Value;
}
Not my code, but a good example i think
source: http://www.eggheadcafe.com/PrintSearchContent.asp?LINKID=624
using System;
using System.Data;
using System.Data.SqlClient;
class OutputParams
{
[STAThread]
static void Main(string[] args)
{
using( SqlConnection cn = new SqlConnection("server=(local);Database=Northwind;user id=sa;password=;"))
{
SqlCommand cmd = new SqlCommand("CustOrderOne", cn);
cmd.CommandType=CommandType.StoredProcedure ;
SqlParameter parm= new SqlParameter("#CustomerID",SqlDbType.NChar) ;
parm.Value="ALFKI";
parm.Direction =ParameterDirection.Input ;
cmd.Parameters.Add(parm);
SqlParameter parm2= new SqlParameter("#ProductName",SqlDbType.VarChar);
parm2.Size=50;
parm2.Direction=ParameterDirection.Output;
cmd.Parameters.Add(parm2);
SqlParameter parm3=new SqlParameter("#Quantity",SqlDbType.Int);
parm3.Direction=ParameterDirection.Output;
cmd.Parameters.Add(parm3);
cn.Open();
cmd.ExecuteNonQuery();
cn.Close();
Console.WriteLine(cmd.Parameters["#ProductName"].Value);
Console.WriteLine(cmd.Parameters["#Quantity"].Value.ToString());
Console.ReadLine();
}
}
public static class SqlParameterExtensions
{
public static T GetValueOrDefault<T>(this SqlParameter sqlParameter)
{
if (sqlParameter.Value == DBNull.Value
|| sqlParameter.Value == null)
{
if (typeof(T).IsValueType)
return (T)Activator.CreateInstance(typeof(T));
return (default(T));
}
return (T)sqlParameter.Value;
}
}
// Usage
using (SqlConnection conn = new SqlConnection(connectionString))
using (SqlCommand cmd = new SqlCommand("storedProcedure", conn))
{
SqlParameter outputIdParam = new SqlParameter("#ID", SqlDbType.Int)
{
Direction = ParameterDirection.Output
};
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add(outputIdParam);
conn.Open();
cmd.ExecuteNonQuery();
int result = outputIdParam.GetValueOrDefault<int>();
}
string ConnectionString = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(ConnectionString))
{
//Create the SqlCommand object
SqlCommand cmd = new SqlCommand(“spAddEmployee”, con);
//Specify that the SqlCommand is a stored procedure
cmd.CommandType = System.Data.CommandType.StoredProcedure;
//Add the input parameters to the command object
cmd.Parameters.AddWithValue(“#Name”, txtEmployeeName.Text);
cmd.Parameters.AddWithValue(“#Gender”, ddlGender.SelectedValue);
cmd.Parameters.AddWithValue(“#Salary”, txtSalary.Text);
//Add the output parameter to the command object
SqlParameter outPutParameter = new SqlParameter();
outPutParameter.ParameterName = “#EmployeeId”;
outPutParameter.SqlDbType = System.Data.SqlDbType.Int;
outPutParameter.Direction = System.Data.ParameterDirection.Output;
cmd.Parameters.Add(outPutParameter);
//Open the connection and execute the query
con.Open();
cmd.ExecuteNonQuery();
//Retrieve the value of the output parameter
string EmployeeId = outPutParameter.Value.ToString();
}
Font http://www.codeproject.com/Articles/748619/ADO-NET-How-to-call-a-stored-procedure-with-output
You can get your result by below code::
using (SqlConnection conn = new SqlConnection(...))
{
SqlCommand cmd = new SqlCommand("sproc", conn);
cmd.CommandType = CommandType.StoredProcedure;
// add other parameters parameters
//Add the output parameter to the command object
SqlParameter outPutParameter = new SqlParameter();
outPutParameter.ParameterName = "#Id";
outPutParameter.SqlDbType = System.Data.SqlDbType.Int;
outPutParameter.Direction = System.Data.ParameterDirection.Output;
cmd.Parameters.Add(outPutParameter);
conn.Open();
cmd.ExecuteNonQuery();
//Retrieve the value of the output parameter
string Id = outPutParameter.Value.ToString();
// *** read output parameter here, how?
conn.Close();
}
Create the SqlParamObject which would give you control to access methods on the parameters
:
SqlParameter param = new SqlParameter();
SET the Name for your paramter (it should b same as you would have declared a variable to hold the value in your DataBase)
: param.ParameterName = "#yourParamterName";
Clear the value holder to hold you output data
: param.Value = 0;
Set the Direction of your Choice (In your case it should be Output)
: param.Direction = System.Data.ParameterDirection.Output;
That looks more explicit for me:
int? id = outputIdParam.Value is DbNull ? default(int?) : outputIdParam.Value;